! Started logfile: /scr/pima/rdv62_uvs/J1700-2610_X_uvs.log on Fri Nov 22 22:40:10 2013 obs /scr/pima/rdv62_uvs/J1700-2610_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J1700-2610_X_uva.fits ! AN table 1: 46 integrations on 3 of 3 possible baselines. ! AN table 2: 22 integrations on 3 of 3 possible baselines. ! AN table 3: 22 integrations on 21 of 21 possible baselines. ! AN table 4: 6 integrations on 3 of 3 possible baselines. ! AN table 5: 23 integrations on 55 of 55 possible baselines. ! AN table 6: 12 integrations on 45 of 45 possible baselines. ! AN table 7: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.687608 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7924 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J1700-2610_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KK self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 91 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 91 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 91 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 91 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.062029Jy sigma=3.291882 ! Fit after self-cal, rms=0.685060Jy sigma=2.006141 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:HH ! Flagging baselines of antenna 1:HH in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:HH ! Flagging baselines of antenna 2:HH in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:HH ! Flagging baselines of antenna 3:HH in the currently selected channels. flag 5:KK ! Flagging baselines of antenna 5:KK in the currently selected channels. flag 6:KK ! Flagging baselines of antenna 6:KK in the currently selected channels. flag 7:KK ! Flagging baselines of antenna 7:KK in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7603 mas, bmaj=2.023 mas, bpa=2.433 degrees ! Estimated noise=4.64623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265378 Jy ! Component: 100 - total flux cleaned = 0.3297 Jy ! Total flux subtracted in 100 components = 0.3297 Jy ! Clean residual min=-0.011069 max=0.026644 Jy/beam ! Clean residual mean=0.000055 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.3297 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.3297 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.098860Jy sigma=0.332070 ! Fit after self-cal, rms=0.098808Jy sigma=0.331785 ! Inverting map and beam ! Estimated beam: bmin=0.7604 mas, bmaj=2.022 mas, bpa=2.416 degrees ! Estimated noise=4.61131 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288631 Jy ! Component: 100 - total flux cleaned = 0.0437263 Jy ! Total flux subtracted in 100 components = 0.0437263 Jy ! Clean residual min=-0.007296 max=0.009078 Jy/beam ! Clean residual mean=0.000017 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.373426 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.373426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090080Jy sigma=0.283433 ! Fit after self-cal, rms=0.090135Jy sigma=0.283409 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9868 mas, bmaj=2.5 mas, bpa=0.4339 degrees ! Estimated noise=2.83824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131966 Jy ! Component: 100 - total flux cleaned = 0.0202224 Jy ! Component: 150 - total flux cleaned = 0.0220748 Jy ! Component: 200 - total flux cleaned = 0.0230611 Jy ! Total flux subtracted in 200 components = 0.0230611 Jy ! Clean residual min=-0.006160 max=0.006294 Jy/beam ! Clean residual mean=-0.000018 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.396488 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 44 components and 0.396488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088497Jy sigma=0.274829 ! Fit after self-cal, rms=0.088423Jy sigma=0.274504 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.00* HN 1.01 KP 1.02 ! NL 1.07 PT 1.01 SC 0.99 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* OV 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.96 HN 1.20 KK 1.00* ! KP 1.00 LA 0.95 MK 0.99 NL 0.98 ! OV 0.99 PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 0.98 KK 1.00* KP 0.98 ! LA 0.95 MK 0.97 NL 1.01 OV 0.96 ! PT 1.02 SC 1.05 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.95 FD 0.98 KK 1.00* KP 1.00 ! LA 0.94 MK 1.00 OV 0.98 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.00* HN 1.05 KP 0.94 ! NL 1.04 PT 1.07 SC 0.95 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* OV 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.97 HN 1.20 KK 1.00* ! KP 0.93 LA 0.94 MK 1.00 NL 0.99 ! OV 0.95 PT 1.05 SC 0.95 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 0.97 KK 1.00* KP 0.95 ! LA 0.96 MK 1.01 NL 0.96 OV 0.96 ! PT 1.07 SC 1.06 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 0.97 KK 1.00* KP 0.94 ! LA 0.95 MK 0.96 OV 0.99 PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HH 1.00* HN 1.03 KP 0.92 ! NL 1.04 PT 1.11 SC 0.96 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* OV 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.07 FD 1.00 HN 1.21 KK 1.00* ! KP 0.85 LA 0.99 MK 1.01 NL 0.99 ! OV 1.04 PT 1.07 SC 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 FD 1.03 KK 1.00* KP 0.89 ! LA 0.99 MK 0.97 NL 1.00 OV 1.05 ! PT 1.14 SC 1.03 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 FD 1.06 KK 1.00* KP 0.85 ! LA 1.03 MK 0.99 OV 1.08 PT 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 HH 1.00* HN 1.13 KP 0.92 ! NL 1.11 PT 1.10 SC 1.02 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* OV 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.08 HN 1.22 KK 1.00* ! KP 0.94 LA 0.96 MK 1.05 NL 1.07 ! OV 1.00 PT 1.04 SC 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.08 KK 1.00* KP 0.93 ! LA 0.99 MK 1.01 NL 0.99 OV 1.02 ! PT 1.06 SC 1.10 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.99 KK 1.00* KP 0.95 ! LA 0.99 MK 0.99 OV 1.06 PT 1.06 ! ! ! Fit before self-cal, rms=0.088423Jy sigma=0.274504 ! Fit after self-cal, rms=0.087081Jy sigma=0.258098 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=2.555 mas, bpa=0.6656 degrees ! Estimated noise=2.88349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100122 Jy ! Component: 100 - total flux cleaned = -0.00106422 Jy ! Component: 150 - total flux cleaned = -0.00106417 Jy ! Component: 200 - total flux cleaned = -0.00116346 Jy ! Total flux subtracted in 200 components = -0.00116346 Jy ! Clean residual min=-0.003217 max=0.002811 Jy/beam ! Clean residual mean=0.000019 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.395324 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.395324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086969Jy sigma=0.257884 ! Fit after self-cal, rms=0.087079Jy sigma=0.257824 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087079Jy sigma=0.257824 ! Fit after self-cal, rms=0.087140Jy sigma=0.257810 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=2.557 mas, bpa=0.6297 degrees ! Estimated noise=2.88202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367264 Jy ! Component: 100 - total flux cleaned = -0.000411889 Jy ! Component: 150 - total flux cleaned = -0.000495784 Jy ! Component: 200 - total flux cleaned = -0.000535963 Jy ! Total flux subtracted in 200 components = -0.000535963 Jy ! Clean residual min=-0.003159 max=0.002812 Jy/beam ! Clean residual mean=0.000018 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.394788 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.394788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087071Jy sigma=0.257699 ! Fit after self-cal, rms=0.087063Jy sigma=0.257693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73939e-06 Jy ! Component: 100 - total flux cleaned = -7.22748e-05 Jy ! Component: 150 - total flux cleaned = -7.16628e-05 Jy ! Component: 200 - total flux cleaned = -7.1986e-05 Jy ! Total flux subtracted in 200 components = -7.1986e-05 Jy ! Clean residual min=-0.003121 max=0.002797 Jy/beam ! Clean residual mean=0.000018 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.394716 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.394716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087020Jy sigma=0.257628 ! Fit after self-cal, rms=0.087015Jy sigma=0.257625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087015Jy sigma=0.257625 ! Fit after self-cal, rms=0.087087Jy sigma=0.257591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=2.558 mas, bpa=0.6049 degrees ! Estimated noise=2.88101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130524 Jy ! Component: 100 - total flux cleaned = -0.000200528 Jy ! Component: 150 - total flux cleaned = -0.000231491 Jy ! Component: 200 - total flux cleaned = -0.00023241 Jy ! Total flux subtracted in 200 components = -0.00023241 Jy ! Clean residual min=-0.003057 max=0.002809 Jy/beam ! Clean residual mean=0.000017 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.394484 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.394484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087044Jy sigma=0.257531 ! Fit after self-cal, rms=0.087041Jy sigma=0.257527 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.64225e-05 Jy ! Component: 100 - total flux cleaned = -5.66755e-05 Jy ! Component: 150 - total flux cleaned = -8.37092e-05 Jy ! Component: 200 - total flux cleaned = -0.000108505 Jy ! Total flux subtracted in 200 components = -0.000108505 Jy ! Clean residual min=-0.003033 max=0.002792 Jy/beam ! Clean residual mean=0.000017 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.394375 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.394375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087013Jy sigma=0.257487 ! Fit after self-cal, rms=0.087009Jy sigma=0.257485 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087009Jy sigma=0.257485 ! Fit after self-cal, rms=0.087035Jy sigma=0.257455 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=5.063 mas, bpa=9.095 degrees ! Estimated noise=3.18143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000672547 Jy ! Component: 100 - total flux cleaned = -0.000862755 Jy ! Component: 150 - total flux cleaned = -0.00101667 Jy ! Component: 200 - total flux cleaned = -0.00109835 Jy ! Total flux subtracted in 200 components = -0.00109835 Jy ! Clean residual min=-0.002871 max=0.002824 Jy/beam ! Clean residual mean=0.000033 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.393277 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 76 components and 0.393277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087044Jy sigma=0.257437 ! Fit after self-cal, rms=0.087045Jy sigma=0.257433 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.80652e-05 Jy ! Component: 100 - total flux cleaned = -0.00010703 Jy ! Component: 150 - total flux cleaned = -0.000134876 Jy ! Component: 200 - total flux cleaned = -0.000161439 Jy ! Total flux subtracted in 200 components = -0.000161439 Jy ! Clean residual min=-0.002872 max=0.002816 Jy/beam ! Clean residual mean=0.000033 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.393115 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.393115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087049Jy sigma=0.257427 ! Fit after self-cal, rms=0.087048Jy sigma=0.257426 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:OV,true ! 4:OV self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:MK,true ! 5:MK self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.132281Jy sigma=0.278761 ! Fit after self-cal, rms=0.114549Jy sigma=0.252835 selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KK self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 106 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 8 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 106 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 8 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 106 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 8 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 106 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 8 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.114549Jy sigma=0.252835 ! Fit after self-cal, rms=0.114043Jy sigma=0.250553 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.7001 mas, bmaj=1.682 mas, bpa=1.812 degrees ! Estimated noise=4.74826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (40.4, 19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285504 Jy ! Component: 100 - total flux cleaned = 0.00319647 Jy ! Component: 150 - total flux cleaned = 0.00319842 Jy ! Component: 200 - total flux cleaned = 0.0029529 Jy ! Total flux subtracted in 200 components = 0.0029529 Jy ! Clean residual min=-0.005174 max=0.004911 Jy/beam ! Clean residual mean=0.000006 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.396068 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.396068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113876Jy sigma=0.250440 ! Fit after self-cal, rms=0.113704Jy sigma=0.249947 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8914 mas, bmaj=2.231 mas, bpa=-1.124 degrees ! Estimated noise=2.80962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.4, -1.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184908 Jy ! Component: 100 - total flux cleaned = 0.00135768 Jy ! Component: 150 - total flux cleaned = 0.000862825 Jy ! Component: 200 - total flux cleaned = 0.000799055 Jy ! Component: 250 - total flux cleaned = 0.000740978 Jy ! Component: 300 - total flux cleaned = 0.000739177 Jy ! Component: 350 - total flux cleaned = 0.000737846 Jy ! Component: 400 - total flux cleaned = 0.000784101 Jy ! Total flux subtracted in 400 components = 0.000784101 Jy ! Clean residual min=-0.002625 max=0.002445 Jy/beam ! Clean residual mean=0.000007 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.396852 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 129 components and 0.396852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113466Jy sigma=0.249449 ! Fit after self-cal, rms=0.113476Jy sigma=0.249422 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86258e-05 Jy ! Component: 100 - total flux cleaned = 8.123e-05 Jy ! Component: 150 - total flux cleaned = 0.000125389 Jy ! Component: 200 - total flux cleaned = 0.000210032 Jy ! Component: 250 - total flux cleaned = 0.000291905 Jy ! Component: 300 - total flux cleaned = 0.000370757 Jy ! Component: 350 - total flux cleaned = 0.000486247 Jy ! Component: 400 - total flux cleaned = 0.000524037 Jy ! Total flux subtracted in 400 components = 0.000524037 Jy ! Clean residual min=-0.002660 max=0.002407 Jy/beam ! Clean residual mean=0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.397376 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 145 components and 0.397376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113370Jy sigma=0.249272 ! Fit after self-cal, rms=0.113378Jy sigma=0.249267 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.135852Jy sigma=0.277270 ! Fit after self-cal, rms=0.113767Jy sigma=0.249164 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8901 mas, bmaj=2.234 mas, bpa=-1.24 degrees ! Estimated noise=2.80581 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025756 Jy ! Component: 100 - total flux cleaned = 0.000301527 Jy ! Component: 150 - total flux cleaned = 0.000503628 Jy ! Component: 200 - total flux cleaned = 0.000580235 Jy ! Component: 250 - total flux cleaned = 0.00065413 Jy ! Component: 300 - total flux cleaned = 0.000762632 Jy ! Component: 350 - total flux cleaned = 0.000796627 Jy ! Component: 400 - total flux cleaned = 0.000865291 Jy ! Total flux subtracted in 400 components = 0.000865291 Jy ! Clean residual min=-0.002704 max=0.002323 Jy/beam ! Clean residual mean=0.000002 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.398242 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 154 components and 0.398242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113672Jy sigma=0.249047 ! Fit after self-cal, rms=0.113678Jy sigma=0.249042 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.5431e-06 Jy ! Component: 100 - total flux cleaned = 6.03662e-05 Jy ! Component: 150 - total flux cleaned = 6.0348e-05 Jy ! Component: 200 - total flux cleaned = 0.000124347 Jy ! Component: 250 - total flux cleaned = 0.000155685 Jy ! Component: 300 - total flux cleaned = 0.000217108 Jy ! Component: 350 - total flux cleaned = 0.000216768 Jy ! Component: 400 - total flux cleaned = 0.000275987 Jy ! Total flux subtracted in 400 components = 0.000275987 Jy ! Clean residual min=-0.002666 max=0.002284 Jy/beam ! Clean residual mean=0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.398518 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 160 components and 0.398518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113626Jy sigma=0.248970 ! Fit after self-cal, rms=0.113631Jy sigma=0.248968 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113631Jy sigma=0.248968 ! Fit after self-cal, rms=0.113919Jy sigma=0.248936 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8894 mas, bmaj=2.235 mas, bpa=-1.29 degrees ! Estimated noise=2.80425 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08997e-05 Jy ! Component: 100 - total flux cleaned = 3.13793e-05 Jy ! Component: 150 - total flux cleaned = 9.26025e-05 Jy ! Component: 200 - total flux cleaned = 0.000152899 Jy ! Component: 250 - total flux cleaned = 0.000211611 Jy ! Component: 300 - total flux cleaned = 0.000268328 Jy ! Component: 350 - total flux cleaned = 0.000296668 Jy ! Component: 400 - total flux cleaned = 0.000351069 Jy ! Total flux subtracted in 400 components = 0.000351069 Jy ! Clean residual min=-0.002669 max=0.002265 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.398869 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 165 components and 0.398869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113861Jy sigma=0.248871 ! Fit after self-cal, rms=0.113868Jy sigma=0.248868 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30082e-05 Jy ! Component: 100 - total flux cleaned = -5.75699e-06 Jy ! Component: 150 - total flux cleaned = 2.14426e-05 Jy ! Component: 200 - total flux cleaned = 7.49887e-05 Jy ! Component: 250 - total flux cleaned = 0.000126787 Jy ! Component: 300 - total flux cleaned = 0.000178616 Jy ! Component: 350 - total flux cleaned = 0.000229835 Jy ! Component: 400 - total flux cleaned = 0.000279389 Jy ! Total flux subtracted in 400 components = 0.000279389 Jy ! Clean residual min=-0.002640 max=0.002240 Jy/beam ! Clean residual mean=0.000001 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.399148 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 172 components and 0.399148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113833Jy sigma=0.248820 ! Fit after self-cal, rms=0.113836Jy sigma=0.248818 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113836Jy sigma=0.248818 ! Fit after self-cal, rms=0.114008Jy sigma=0.244584 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=2.322 mas, bmaj=5.05 mas, bpa=7.737 degrees ! Estimated noise=3.15102 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000772223 Jy ! Component: 100 - total flux cleaned = -0.000775552 Jy ! Component: 150 - total flux cleaned = -0.000717674 Jy ! Component: 200 - total flux cleaned = -0.000700377 Jy ! Component: 250 - total flux cleaned = -0.000668324 Jy ! Component: 300 - total flux cleaned = -0.000638965 Jy ! Component: 350 - total flux cleaned = -0.000596869 Jy ! Component: 400 - total flux cleaned = -0.000570958 Jy ! Total flux subtracted in 400 components = -0.000570958 Jy ! Clean residual min=-0.002363 max=0.002162 Jy/beam ! Clean residual mean=0.000002 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.398577 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 188 components and 0.398577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114005Jy sigma=0.244573 ! Fit after self-cal, rms=0.114028Jy sigma=0.244559 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199588 Jy ! Component: 100 - total flux cleaned = -0.00014307 Jy ! Component: 150 - total flux cleaned = -0.000117674 Jy ! Component: 200 - total flux cleaned = -0.000105571 Jy ! Component: 250 - total flux cleaned = -6.95152e-05 Jy ! Component: 300 - total flux cleaned = -5.79813e-05 Jy ! Component: 350 - total flux cleaned = -5.78766e-05 Jy ! Component: 400 - total flux cleaned = -5.82153e-05 Jy ! Total flux subtracted in 400 components = -5.82153e-05 Jy ! Clean residual min=-0.002345 max=0.002202 Jy/beam ! Clean residual mean=0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.398519 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 197 components and 0.398519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114026Jy sigma=0.244556 ! Fit after self-cal, rms=0.114021Jy sigma=0.244555 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8891 mas, bmaj=2.24 mas, bpa=-1.353 degrees ! Estimated noise=2.80581 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8891 x 2.24 at -1.353 degrees (North through East) ! Clean map min=-0.0026279 max=0.34565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.6987 mas, bmaj=1.686 mas, bpa=1.591 degrees ! Estimated noise=4.73686 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260705 Jy ! Component: 100 - total flux cleaned = 0.32488 Jy ! Component: 150 - total flux cleaned = 0.35512 Jy ! Component: 200 - total flux cleaned = 0.371711 Jy ! Component: 250 - total flux cleaned = 0.38158 Jy ! Component: 300 - total flux cleaned = 0.387323 Jy ! Component: 350 - total flux cleaned = 0.389323 Jy ! Component: 400 - total flux cleaned = 0.390834 Jy ! Total flux subtracted in 400 components = 0.390834 Jy ! Clean residual min=-0.004922 max=0.005005 Jy/beam ! Clean residual mean=0.000010 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.390835 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.390835 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8891 mas, bmaj=2.24 mas, bpa=-1.353 degrees ! Estimated noise=2.80581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400622 Jy ! Component: 100 - total flux cleaned = 0.00596245 Jy ! Component: 150 - total flux cleaned = 0.00649722 Jy ! Component: 200 - total flux cleaned = 0.00703977 Jy ! Component: 250 - total flux cleaned = 0.00725116 Jy ! Component: 300 - total flux cleaned = 0.00751383 Jy ! Component: 350 - total flux cleaned = 0.00770014 Jy ! Component: 400 - total flux cleaned = 0.00787525 Jy ! Total flux subtracted in 400 components = 0.00787525 Jy ! Clean residual min=-0.002846 max=0.002383 Jy/beam ! Clean residual mean=0.000003 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.39871 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 70 components and 0.39871 Jy ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=2.322 mas, bmaj=5.05 mas, bpa=7.737 degrees ! Estimated noise=3.15102 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96523e-05 Jy ! Component: 100 - total flux cleaned = 6.81039e-05 Jy ! Component: 150 - total flux cleaned = 7.064e-05 Jy ! Component: 200 - total flux cleaned = 9.53092e-06 Jy ! Component: 250 - total flux cleaned = -0.000144631 Jy ! Component: 300 - total flux cleaned = -0.000144824 Jy ! Component: 350 - total flux cleaned = -0.000145314 Jy ! Component: 400 - total flux cleaned = -0.00016642 Jy ! Total flux subtracted in 400 components = -0.00016642 Jy ! Clean residual min=-0.002468 max=0.002183 Jy/beam ! Clean residual mean=0.000004 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.398543 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.28426e-07 Jy ! Component: 100 - total flux cleaned = 8.87594e-08 Jy ! Component: 150 - total flux cleaned = 2.68669e-07 Jy ! Component: 200 - total flux cleaned = -1.87447e-05 Jy ! Component: 250 - total flux cleaned = -1.80429e-05 Jy ! Component: 300 - total flux cleaned = -3.54483e-05 Jy ! Component: 350 - total flux cleaned = -1.8733e-05 Jy ! Component: 400 - total flux cleaned = -3.52523e-05 Jy ! Total flux subtracted in 400 components = -3.52523e-05 Jy ! Clean residual min=-0.002442 max=0.002173 Jy/beam ! Clean residual mean=0.000003 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.398508 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 103 components and 0.398508 Jy ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! Estimated beam: bmin=0.8891 mas, bmaj=2.24 mas, bpa=-1.353 degrees ! Estimated noise=2.80581 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330633 Jy ! Component: 100 - total flux cleaned = -0.000328196 Jy ! Component: 150 - total flux cleaned = -0.000278959 Jy ! Component: 200 - total flux cleaned = -0.000135241 Jy ! Component: 250 - total flux cleaned = -8.99868e-05 Jy ! Component: 300 - total flux cleaned = 2.77376e-07 Jy ! Component: 350 - total flux cleaned = 4.33098e-05 Jy ! Component: 400 - total flux cleaned = 8.584e-05 Jy ! Total flux subtracted in 400 components = 8.584e-05 Jy ! Clean residual min=-0.002772 max=0.002270 Jy/beam ! Clean residual mean=0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.398594 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 124 components and 0.398594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114520Jy sigma=0.244871 ! Fit after self-cal, rms=0.114583Jy sigma=0.244847 wmodel /scr/pima/rdv62_uvs/J1700-2610_X_map.mod ! Writing 124 model components to file: /scr/pima/rdv62_uvs/J1700-2610_X_map.mod wobs /scr/pima/rdv62_uvs/J1700-2610_X_uvs.fits ! Applying 895 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J1700-2610_X_uvs.fits wwins /scr/pima/rdv62_uvs/J1700-2610_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv62_uvs/J1700-2610_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010372 Jy ! Component: 100 - total flux cleaned = -0.000952115 Jy ! Component: 150 - total flux cleaned = -0.000870236 Jy ! Component: 200 - total flux cleaned = -0.000871046 Jy ! Component: 250 - total flux cleaned = -0.000987768 Jy ! Component: 300 - total flux cleaned = -0.000987701 Jy ! Component: 350 - total flux cleaned = -0.000987799 Jy ! Component: 400 - total flux cleaned = -0.000987951 Jy ! Component: 450 - total flux cleaned = -0.00102313 Jy ! Component: 500 - total flux cleaned = -0.000952573 Jy ! Component: 550 - total flux cleaned = -0.00109128 Jy ! Component: 600 - total flux cleaned = -0.000954897 Jy ! Component: 650 - total flux cleaned = -0.00109048 Jy ! Component: 700 - total flux cleaned = -0.00109041 Jy ! Component: 750 - total flux cleaned = -0.00105727 Jy ! Component: 800 - total flux cleaned = -0.00115466 Jy ! Component: 850 - total flux cleaned = -0.00112236 Jy ! Component: 900 - total flux cleaned = -0.00128129 Jy ! Component: 950 - total flux cleaned = -0.00131268 Jy ! Component: 1000 - total flux cleaned = -0.00146854 Jy ! Component: 1050 - total flux cleaned = -0.00153031 Jy ! Component: 1100 - total flux cleaned = -0.00153054 Jy ! Component: 1150 - total flux cleaned = -0.00159118 Jy ! Component: 1200 - total flux cleaned = -0.00165143 Jy ! Component: 1250 - total flux cleaned = -0.00177097 Jy ! Component: 1300 - total flux cleaned = -0.00183016 Jy ! Component: 1350 - total flux cleaned = -0.00200674 Jy ! Component: 1400 - total flux cleaned = -0.0020652 Jy ! Component: 1450 - total flux cleaned = -0.00215206 Jy ! Component: 1500 - total flux cleaned = -0.00226741 Jy ! Component: 1550 - total flux cleaned = -0.00246788 Jy ! Component: 1600 - total flux cleaned = -0.00261057 Jy ! Component: 1650 - total flux cleaned = -0.00272373 Jy ! Component: 1700 - total flux cleaned = -0.00278039 Jy ! Component: 1750 - total flux cleaned = -0.00289203 Jy ! Component: 1800 - total flux cleaned = -0.003059 Jy ! Component: 1850 - total flux cleaned = -0.00311458 Jy ! Component: 1900 - total flux cleaned = -0.00314232 Jy ! Component: 1950 - total flux cleaned = -0.00325163 Jy ! Component: 2000 - total flux cleaned = -0.00346853 Jy ! Component: 2050 - total flux cleaned = -0.00344135 Jy ! Component: 2100 - total flux cleaned = -0.00349523 Jy ! Component: 2150 - total flux cleaned = -0.00362862 Jy ! Component: 2200 - total flux cleaned = -0.0036552 Jy ! Component: 2250 - total flux cleaned = -0.00368108 Jy ! Component: 2300 - total flux cleaned = -0.00373346 Jy ! Component: 2350 - total flux cleaned = -0.00370724 Jy ! Component: 2400 - total flux cleaned = -0.0037071 Jy ! Component: 2450 - total flux cleaned = -0.00378485 Jy ! Component: 2500 - total flux cleaned = -0.003862 Jy ! Component: 2550 - total flux cleaned = -0.00373392 Jy ! Component: 2600 - total flux cleaned = -0.00383601 Jy ! Component: 2650 - total flux cleaned = -0.00386145 Jy ! Component: 2700 - total flux cleaned = -0.00378578 Jy ! Component: 2750 - total flux cleaned = -0.00383588 Jy ! Component: 2800 - total flux cleaned = -0.00388586 Jy ! Component: 2850 - total flux cleaned = -0.00376156 Jy ! Component: 2900 - total flux cleaned = -0.00383629 Jy ! Component: 2950 - total flux cleaned = -0.00395942 Jy ! Component: 3000 - total flux cleaned = -0.00398386 Jy ! Component: 3050 - total flux cleaned = -0.00408144 Jy ! Component: 3100 - total flux cleaned = -0.00410568 Jy ! Component: 3150 - total flux cleaned = -0.00420241 Jy ! Component: 3200 - total flux cleaned = -0.0041781 Jy ! Component: 3250 - total flux cleaned = -0.0042019 Jy ! Component: 3300 - total flux cleaned = -0.00420192 Jy ! Component: 3350 - total flux cleaned = -0.00429715 Jy ! Component: 3400 - total flux cleaned = -0.00432092 Jy ! Component: 3450 - total flux cleaned = -0.00420304 Jy ! Component: 3500 - total flux cleaned = -0.00436764 Jy ! Component: 3550 - total flux cleaned = -0.00427419 Jy ! Component: 3600 - total flux cleaned = -0.00439047 Jy ! Component: 3650 - total flux cleaned = -0.00434413 Jy ! Component: 3700 - total flux cleaned = -0.00445966 Jy ! Component: 3750 - total flux cleaned = -0.00448261 Jy ! Component: 3800 - total flux cleaned = -0.0045054 Jy ! Component: 3850 - total flux cleaned = -0.0045057 Jy ! Component: 3900 - total flux cleaned = -0.0045967 Jy ! Component: 3950 - total flux cleaned = -0.00464183 Jy ! Component: 4000 - total flux cleaned = -0.00464182 Jy ! Component: 4050 - total flux cleaned = -0.00470907 Jy ! Total flux subtracted in 4096 components = -0.00464198 Jy ! Clean residual min=-0.001220 max=0.001496 Jy/beam ! Clean residual mean=-0.000000 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.393952 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 392 components and 0.393952 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J1700-2610_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8891 x 2.24 at -1.353 degrees (North through East) ! Clean map min=-0.0022469 max=0.34527 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J1700-2610_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 3.44% of the data. ! The x-axis pixel size should ideally be below 0.168 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.3452 rms= 0.00038 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J1700-2610_X_uvs.log closed on Fri Nov 22 22:40:16 2013