! Started logfile: /scr/pima/rdv62_uvs/J1522-2730_X_uvs.log on Fri Nov 22 22:39:27 2013 obs /scr/pima/rdv62_uvs/J1522-2730_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J1522-2730_X_uva.fits ! AN table 1: 3 integrations on 3 of 3 possible baselines. ! AN table 2: 4 integrations on 3 of 3 possible baselines. ! AN table 3: 3 integrations on 3 of 3 possible baselines. ! AN table 4: 2 integrations on 3 of 3 possible baselines. ! AN table 5: 4 integrations on 10 of 10 possible baselines. ! AN table 6: 4 integrations on 45 of 45 possible baselines. ! AN table 7: 11 integrations on 55 of 55 possible baselines. ! AN table 8: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533149 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2316 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J1522-2730_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.791731Jy sigma=29.439331 ! Fit after self-cal, rms=0.518368Jy sigma=9.036445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:HH ! Flagging baselines of antenna 1:HH in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:HH ! Flagging baselines of antenna 2:HH in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 7:KK ! Flagging baselines of antenna 7:KK in the currently selected channels. flag 8:KK ! Flagging baselines of antenna 8:KK in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7458 mas, bmaj=1.803 mas, bpa=-1.138 degrees ! Estimated noise=1.40148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13294 Jy ! Component: 100 - total flux cleaned = 1.38369 Jy ! Total flux subtracted in 100 components = 1.38369 Jy ! Clean residual min=-0.030773 max=0.083195 Jy/beam ! Clean residual mean=-0.000022 rms=0.007873 Jy/beam ! Combined flux in latest and established models = 1.38369 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.38369 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.222364Jy sigma=3.936243 ! Fit after self-cal, rms=0.222334Jy sigma=3.935834 ! Inverting map and beam ! Estimated beam: bmin=0.7458 mas, bmaj=1.803 mas, bpa=-1.138 degrees ! Estimated noise=1.40148 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0876881 Jy ! Component: 100 - total flux cleaned = 0.132757 Jy ! Total flux subtracted in 100 components = 0.132757 Jy ! Clean residual min=-0.022772 max=0.036291 Jy/beam ! Clean residual mean=-0.000010 rms=0.005381 Jy/beam ! Combined flux in latest and established models = 1.51644 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 1.51644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162820Jy sigma=2.699070 ! Fit after self-cal, rms=0.162788Jy sigma=2.698735 ! Inverting map ! Added new window around map position (1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034303 Jy ! Component: 100 - total flux cleaned = 0.0549028 Jy ! Total flux subtracted in 100 components = 0.0549028 Jy ! Clean residual min=-0.020530 max=0.022144 Jy/beam ! Clean residual mean=-0.000005 rms=0.004895 Jy/beam ! Combined flux in latest and established models = 1.57135 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 1.57135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148239Jy sigma=2.406367 ! Fit after self-cal, rms=0.147970Jy sigma=2.401269 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9857 mas, bmaj=2.283 mas, bpa=-4.733 degrees ! Estimated noise=0.965925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350426 Jy ! Component: 100 - total flux cleaned = 0.0522222 Jy ! Component: 150 - total flux cleaned = 0.0600485 Jy ! Component: 200 - total flux cleaned = 0.0613017 Jy ! Total flux subtracted in 200 components = 0.0613017 Jy ! Clean residual min=-0.026151 max=0.028166 Jy/beam ! Clean residual mean=0.000024 rms=0.005887 Jy/beam ! Combined flux in latest and established models = 1.63265 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 1.63265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141016Jy sigma=2.253773 ! Fit after self-cal, rms=0.140812Jy sigma=2.251007 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 KP 0.99 LA 0.96 OV 1.00 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.00 HN 1.02 KP 0.99 ! LA 0.98 MK 1.01 NL 0.97 OV 0.99 ! PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.02 HN 1.10 KK 1.00* ! KP 0.97 LA 0.95 MK 0.98 NL 1.01 ! OV 0.97 PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.97 FD 0.98 KK 1.00* KP 0.98 ! LA 0.95 MK 0.99 NL 1.02 OV 0.98 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 KP 0.95 LA 0.97 OV 0.98 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.99 HN 1.03 KP 0.94 ! LA 0.97 MK 1.01 NL 0.96 OV 0.97 ! PT 1.08 SC 0.94 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.03 HN 1.11 KK 1.00* ! KP 0.93 LA 0.95 MK 0.98 NL 0.99 ! OV 0.95 PT 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.97 FD 0.98 KK 1.00* KP 0.94 ! LA 0.95 MK 1.01 NL 1.00 OV 0.96 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 KP 0.91 LA 1.01 OV 1.06 ! PT 1.08 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 FD 1.04 HN 1.03 KP 0.90 ! LA 1.04 MK 1.03 NL 0.99 OV 1.04 ! PT 1.10 SC 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.08 HN 1.07 KK 1.00* ! KP 0.87 LA 1.02 MK 0.99 NL 1.02 ! OV 1.01 PT 1.05 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.05 FD 1.04 KK 1.00* KP 0.89 ! LA 1.01 MK 1.04 NL 1.05 OV 1.03 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.08 KP 0.97 LA 1.02 OV 1.02 ! PT 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 FD 1.07 HN 1.08 KP 0.95 ! LA 1.04 MK 1.07 NL 1.02 OV 1.02 ! PT 1.10 SC 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.09 HN 1.18 KK 1.00* ! KP 0.93 LA 0.99 MK 1.03 NL 1.05 ! OV 1.00 PT 1.06 SC 1.09 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 FD 1.06 KK 1.00* KP 0.95 ! LA 0.99 MK 1.06 NL 1.07 OV 1.01 ! PT 1.07 SC 1.04 ! ! ! Fit before self-cal, rms=0.140812Jy sigma=2.251007 ! Fit after self-cal, rms=0.082966Jy sigma=1.273211 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9864 mas, bmaj=2.288 mas, bpa=-4.665 degrees ! Estimated noise=0.972115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00434693 Jy ! Component: 100 - total flux cleaned = -0.0046195 Jy ! Component: 150 - total flux cleaned = -0.00486418 Jy ! Component: 200 - total flux cleaned = -0.00508539 Jy ! Total flux subtracted in 200 components = -0.00508539 Jy ! Clean residual min=-0.006768 max=0.005979 Jy/beam ! Clean residual mean=-0.000013 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 1.62756 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 1.62756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082336Jy sigma=1.265614 ! Fit after self-cal, rms=0.082320Jy sigma=1.264314 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082320Jy sigma=1.264314 ! Fit after self-cal, rms=0.082239Jy sigma=1.263226 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9872 mas, bmaj=2.29 mas, bpa=-4.66 degrees ! Estimated noise=0.971782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00361043 Jy ! Component: 100 - total flux cleaned = -0.00384019 Jy ! Component: 150 - total flux cleaned = -0.00405352 Jy ! Component: 200 - total flux cleaned = -0.00425195 Jy ! Total flux subtracted in 200 components = -0.00425195 Jy ! Clean residual min=-0.006600 max=0.005798 Jy/beam ! Clean residual mean=-0.000013 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 1.62331 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 1.62331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081806Jy sigma=1.258156 ! Fit after self-cal, rms=0.081751Jy sigma=1.257416 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000808918 Jy ! Component: 100 - total flux cleaned = -0.000995673 Jy ! Component: 150 - total flux cleaned = -0.00108431 Jy ! Component: 200 - total flux cleaned = -0.00116855 Jy ! Total flux subtracted in 200 components = -0.00116855 Jy ! Clean residual min=-0.006657 max=0.005773 Jy/beam ! Clean residual mean=-0.000014 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 1.62214 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 1.62214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081491Jy sigma=1.254823 ! Fit after self-cal, rms=0.081465Jy sigma=1.254528 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081465Jy sigma=1.254528 ! Fit after self-cal, rms=0.081392Jy sigma=1.253103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9878 mas, bmaj=2.292 mas, bpa=-4.671 degrees ! Estimated noise=0.971613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280451 Jy ! Component: 100 - total flux cleaned = -0.00298514 Jy ! Component: 150 - total flux cleaned = -0.00323512 Jy ! Component: 200 - total flux cleaned = -0.0033894 Jy ! Total flux subtracted in 200 components = -0.0033894 Jy ! Clean residual min=-0.006446 max=0.005676 Jy/beam ! Clean residual mean=-0.000013 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 1.61875 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 1.61875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081120Jy sigma=1.249983 ! Fit after self-cal, rms=0.081090Jy sigma=1.249574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547495 Jy ! Component: 100 - total flux cleaned = -0.000622037 Jy ! Component: 150 - total flux cleaned = -0.000693979 Jy ! Component: 200 - total flux cleaned = -0.000828622 Jy ! Total flux subtracted in 200 components = -0.000828622 Jy ! Clean residual min=-0.006508 max=0.005648 Jy/beam ! Clean residual mean=-0.000014 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.61792 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 1.61792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080915Jy sigma=1.247846 ! Fit after self-cal, rms=0.080901Jy sigma=1.247683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080901Jy sigma=1.247683 ! Fit after self-cal, rms=0.080858Jy sigma=1.246791 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=6.408 mas, bpa=4.276 degrees ! Estimated noise=1.1041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245382 Jy ! Component: 100 - total flux cleaned = -0.00291193 Jy ! Component: 150 - total flux cleaned = -0.00295779 Jy ! Component: 200 - total flux cleaned = -0.00295951 Jy ! Total flux subtracted in 200 components = -0.00295951 Jy ! Clean residual min=-0.005979 max=0.005833 Jy/beam ! Clean residual mean=-0.000024 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 1.61496 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 1.61496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080788Jy sigma=1.245756 ! Fit after self-cal, rms=0.080773Jy sigma=1.245453 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441948 Jy ! Component: 100 - total flux cleaned = -0.000441655 Jy ! Component: 150 - total flux cleaned = -0.00048153 Jy ! Component: 200 - total flux cleaned = -0.000514862 Jy ! Total flux subtracted in 200 components = -0.000514862 Jy ! Clean residual min=-0.006012 max=0.005828 Jy/beam ! Clean residual mean=-0.000025 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 1.61445 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 1.61445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080763Jy sigma=1.245343 ! Fit after self-cal, rms=0.080757Jy sigma=1.245215 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.246998Jy sigma=2.932113 ! Fit after self-cal, rms=0.214053Jy sigma=2.815078 selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 53 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 53 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 53 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 53 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.214053Jy sigma=2.815078 ! Fit after self-cal, rms=0.091080Jy sigma=1.258939 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.6931 mas, bmaj=1.796 mas, bpa=-4.001 degrees ! Estimated noise=1.42895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00278088 Jy ! Component: 100 - total flux cleaned = -0.00356226 Jy ! Component: 150 - total flux cleaned = -0.00383225 Jy ! Component: 200 - total flux cleaned = -0.00396242 Jy ! Total flux subtracted in 200 components = -0.00396242 Jy ! Clean residual min=-0.007737 max=0.007242 Jy/beam ! Clean residual mean=0.000001 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 1.61049 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 1.61049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090703Jy sigma=1.256591 ! Fit after self-cal, rms=0.090576Jy sigma=1.255661 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9165 mas, bmaj=2.287 mas, bpa=-6.755 degrees ! Estimated noise=0.962603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125087 Jy ! Component: 100 - total flux cleaned = 0.00133131 Jy ! Component: 150 - total flux cleaned = 0.00133109 Jy ! Component: 200 - total flux cleaned = 0.00120101 Jy ! Component: 250 - total flux cleaned = 0.00113567 Jy ! Component: 300 - total flux cleaned = 0.0010747 Jy ! Component: 350 - total flux cleaned = 0.000954358 Jy ! Component: 400 - total flux cleaned = 0.000898057 Jy ! Total flux subtracted in 400 components = 0.000898057 Jy ! Clean residual min=-0.006509 max=0.005645 Jy/beam ! Clean residual mean=-0.000012 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 1.61139 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 1.61139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090271Jy sigma=1.253561 ! Fit after self-cal, rms=0.090263Jy sigma=1.253488 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127044 Jy ! Component: 100 - total flux cleaned = -0.000124831 Jy ! Component: 150 - total flux cleaned = -0.000177166 Jy ! Component: 200 - total flux cleaned = -0.000227903 Jy ! Component: 250 - total flux cleaned = -0.000277421 Jy ! Component: 300 - total flux cleaned = -0.000327612 Jy ! Component: 350 - total flux cleaned = -0.000374658 Jy ! Component: 400 - total flux cleaned = -0.000421665 Jy ! Total flux subtracted in 400 components = -0.000421665 Jy ! Clean residual min=-0.006537 max=0.005558 Jy/beam ! Clean residual mean=-0.000012 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 1.61096 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 1.61096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090080Jy sigma=1.252349 ! Fit after self-cal, rms=0.090071Jy sigma=1.252292 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 61 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.241602Jy sigma=2.873193 ! Fit after self-cal, rms=0.089972Jy sigma=1.251027 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9163 mas, bmaj=2.287 mas, bpa=-6.781 degrees ! Estimated noise=0.962315 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119683 Jy ! Component: 100 - total flux cleaned = -0.0012662 Jy ! Component: 150 - total flux cleaned = -0.00132418 Jy ! Component: 200 - total flux cleaned = -0.00137983 Jy ! Component: 250 - total flux cleaned = -0.00148352 Jy ! Component: 300 - total flux cleaned = -0.00153317 Jy ! Component: 350 - total flux cleaned = -0.00158121 Jy ! Component: 400 - total flux cleaned = -0.00162921 Jy ! Total flux subtracted in 400 components = -0.00162921 Jy ! Clean residual min=-0.006269 max=0.005617 Jy/beam ! Clean residual mean=-0.000012 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 1.60933 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 1.60933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089756Jy sigma=1.249336 ! Fit after self-cal, rms=0.089746Jy sigma=1.249235 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236528 Jy ! Component: 100 - total flux cleaned = -0.000282634 Jy ! Component: 150 - total flux cleaned = -0.000325315 Jy ! Component: 200 - total flux cleaned = -0.000366088 Jy ! Component: 250 - total flux cleaned = -0.000408913 Jy ! Component: 300 - total flux cleaned = -0.000447186 Jy ! Component: 350 - total flux cleaned = -0.000447146 Jy ! Component: 400 - total flux cleaned = -0.000484873 Jy ! Total flux subtracted in 400 components = -0.000484873 Jy ! Clean residual min=-0.006307 max=0.005564 Jy/beam ! Clean residual mean=-0.000012 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 1.60885 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 1.60885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089631Jy sigma=1.248388 ! Fit after self-cal, rms=0.089624Jy sigma=1.248339 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089624Jy sigma=1.248339 ! Fit after self-cal, rms=0.089571Jy sigma=1.247783 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9161 mas, bmaj=2.287 mas, bpa=-6.804 degrees ! Estimated noise=0.962007 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000944996 Jy ! Component: 100 - total flux cleaned = -0.00105416 Jy ! Component: 150 - total flux cleaned = -0.00109996 Jy ! Component: 200 - total flux cleaned = -0.00114419 Jy ! Component: 250 - total flux cleaned = -0.00118454 Jy ! Component: 300 - total flux cleaned = -0.00122234 Jy ! Component: 350 - total flux cleaned = -0.00129808 Jy ! Component: 400 - total flux cleaned = -0.00133386 Jy ! Total flux subtracted in 400 components = -0.00133386 Jy ! Clean residual min=-0.006152 max=0.005639 Jy/beam ! Clean residual mean=-0.000013 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 1.60752 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 1.60752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089430Jy sigma=1.246655 ! Fit after self-cal, rms=0.089423Jy sigma=1.246577 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198755 Jy ! Component: 100 - total flux cleaned = -0.000236977 Jy ! Component: 150 - total flux cleaned = -0.000271113 Jy ! Component: 200 - total flux cleaned = -0.00030545 Jy ! Component: 250 - total flux cleaned = -0.000337206 Jy ! Component: 300 - total flux cleaned = -0.000336805 Jy ! Component: 350 - total flux cleaned = -0.000368908 Jy ! Component: 400 - total flux cleaned = -0.000400317 Jy ! Total flux subtracted in 400 components = -0.000400317 Jy ! Clean residual min=-0.006184 max=0.005602 Jy/beam ! Clean residual mean=-0.000013 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 1.60712 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 1.60712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089347Jy sigma=1.246020 ! Fit after self-cal, rms=0.089341Jy sigma=1.245980 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089341Jy sigma=1.245980 ! Fit after self-cal, rms=0.088803Jy sigma=1.234003 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=2.673 mas, bmaj=6.378 mas, bpa=3.626 degrees ! Estimated noise=1.1022 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383999 Jy ! Component: 100 - total flux cleaned = -0.000382345 Jy ! Component: 150 - total flux cleaned = -0.000381787 Jy ! Component: 200 - total flux cleaned = -0.000381631 Jy ! Component: 250 - total flux cleaned = -0.000389944 Jy ! Component: 300 - total flux cleaned = -0.000389984 Jy ! Component: 350 - total flux cleaned = -0.000389296 Jy ! Component: 400 - total flux cleaned = -0.000380635 Jy ! Total flux subtracted in 400 components = -0.000380635 Jy ! Clean residual min=-0.005764 max=0.005848 Jy/beam ! Clean residual mean=-0.000023 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 1.60674 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 1.60674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088804Jy sigma=1.233911 ! Fit after self-cal, rms=0.088793Jy sigma=1.233817 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43.4, -23.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185058 Jy ! Component: 100 - total flux cleaned = 0.00348516 Jy ! Component: 150 - total flux cleaned = 0.0039242 Jy ! Component: 200 - total flux cleaned = 0.00380191 Jy ! Component: 250 - total flux cleaned = 0.00356836 Jy ! Component: 300 - total flux cleaned = 0.00357139 Jy ! Component: 350 - total flux cleaned = 0.00367292 Jy ! Component: 400 - total flux cleaned = 0.00348518 Jy ! Total flux subtracted in 400 components = 0.00348518 Jy ! Clean residual min=-0.004985 max=0.004883 Jy/beam ! Clean residual mean=-0.000017 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 1.61022 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 161 components and 1.61022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088193Jy sigma=1.221355 ! Fit after self-cal, rms=0.088154Jy sigma=1.220830 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Added new window around map position (2.2, -31.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976718 Jy ! Component: 100 - total flux cleaned = -0.00143447 Jy ! Component: 150 - total flux cleaned = -0.0019279 Jy ! Component: 200 - total flux cleaned = -0.00226883 Jy ! Component: 250 - total flux cleaned = -0.00247504 Jy ! Component: 300 - total flux cleaned = -0.00247806 Jy ! Component: 350 - total flux cleaned = -0.00257179 Jy ! Component: 400 - total flux cleaned = -0.00248736 Jy ! Total flux subtracted in 400 components = -0.00248736 Jy ! Clean residual min=-0.004210 max=0.003840 Jy/beam ! Clean residual mean=-0.000011 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 1.60773 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 230 components and 1.60773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087709Jy sigma=1.211881 ! Fit after self-cal, rms=0.087699Jy sigma=1.211552 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9159 mas, bmaj=2.287 mas, bpa=-6.83 degrees ! Estimated noise=0.961846 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9159 x 2.287 at -6.83 degrees (North through East) ! Clean map min=-0.006652 max=1.4818 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087699Jy sigma=1.211552 ! Fit after self-cal, rms=0.079283Jy sigma=1.100938 ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9158 mas, bmaj=2.287 mas, bpa=-6.822 degrees ! Estimated noise=0.962001 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.3367e-06 Jy ! Component: 100 - total flux cleaned = -0.000169802 Jy ! Component: 150 - total flux cleaned = -2.50084e-05 Jy ! Component: 200 - total flux cleaned = 0.000672105 Jy ! Component: 250 - total flux cleaned = 0.00107546 Jy ! Component: 300 - total flux cleaned = 0.00133464 Jy ! Component: 350 - total flux cleaned = 0.00145773 Jy ! Component: 400 - total flux cleaned = 0.00145768 Jy ! Total flux subtracted in 400 components = 0.00145768 Jy ! Clean residual min=-0.004285 max=0.004221 Jy/beam ! Clean residual mean=-0.000004 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 1.60919 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 305 components and 1.60919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078163Jy sigma=1.088055 ! Fit after self-cal, rms=0.078149Jy sigma=1.087886 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118622 Jy ! Component: 100 - total flux cleaned = 0.000346902 Jy ! Component: 150 - total flux cleaned = 0.00011721 Jy ! Component: 200 - total flux cleaned = 4.19059e-06 Jy ! Component: 250 - total flux cleaned = 0.000221482 Jy ! Component: 300 - total flux cleaned = 8.72846e-06 Jy ! Component: 350 - total flux cleaned = 1.09853e-05 Jy ! Component: 400 - total flux cleaned = -9.26218e-05 Jy ! Total flux subtracted in 400 components = -9.26218e-05 Jy ! Clean residual min=-0.004065 max=0.004053 Jy/beam ! Clean residual mean=-0.000003 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 1.6091 Jy ! Performing phase self-cal ! Adding 110 model components to the UV plane model. ! The established model now contains 358 components and 1.6091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077474Jy sigma=1.080155 ! Fit after self-cal, rms=0.077474Jy sigma=1.080106 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077474Jy sigma=1.080106 ! Fit after self-cal, rms=0.077500Jy sigma=1.079649 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.6921 mas, bmaj=1.796 mas, bpa=-4.072 degrees ! Estimated noise=1.4291 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14869 Jy ! Component: 100 - total flux cleaned = 1.40413 Jy ! Component: 150 - total flux cleaned = 1.49406 Jy ! Component: 200 - total flux cleaned = 1.53996 Jy ! Component: 250 - total flux cleaned = 1.56521 Jy ! Component: 300 - total flux cleaned = 1.58045 Jy ! Component: 350 - total flux cleaned = 1.58427 Jy ! Component: 400 - total flux cleaned = 1.5846 Jy ! Total flux subtracted in 400 components = 1.5846 Jy ! Clean residual min=-0.007224 max=0.008531 Jy/beam ! Clean residual mean=0.000000 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 1.5846 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 1.5846 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9158 mas, bmaj=2.287 mas, bpa=-6.822 degrees ! Estimated noise=0.962203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -3). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968941 Jy ! Component: 100 - total flux cleaned = 0.0118807 Jy ! Component: 150 - total flux cleaned = 0.0132267 Jy ! Component: 200 - total flux cleaned = 0.0140524 Jy ! Component: 250 - total flux cleaned = 0.014631 Jy ! Component: 300 - total flux cleaned = 0.0155211 Jy ! Component: 350 - total flux cleaned = 0.0165409 Jy ! Component: 400 - total flux cleaned = 0.0173459 Jy ! Total flux subtracted in 400 components = 0.0173459 Jy ! Clean residual min=-0.005122 max=0.004923 Jy/beam ! Clean residual mean=-0.000006 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 1.60194 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 119 components and 1.60194 Jy ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=2.674 mas, bmaj=6.378 mas, bpa=3.638 degrees ! Estimated noise=1.10256 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665755 Jy ! Component: 100 - total flux cleaned = 0.00163541 Jy ! Component: 150 - total flux cleaned = 0.00251575 Jy ! Component: 200 - total flux cleaned = 0.00287129 Jy ! Component: 250 - total flux cleaned = 0.00320837 Jy ! Component: 300 - total flux cleaned = 0.00352791 Jy ! Component: 350 - total flux cleaned = 0.00383014 Jy ! Component: 400 - total flux cleaned = 0.00411925 Jy ! Total flux subtracted in 400 components = 0.00411925 Jy ! Clean residual min=-0.004580 max=0.004136 Jy/beam ! Clean residual mean=-0.000007 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 1.60606 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002786 Jy ! Component: 100 - total flux cleaned = 0.000543302 Jy ! Component: 150 - total flux cleaned = 0.0011341 Jy ! Component: 200 - total flux cleaned = 0.00121241 Jy ! Component: 250 - total flux cleaned = 0.00129277 Jy ! Component: 300 - total flux cleaned = 0.00137042 Jy ! Component: 350 - total flux cleaned = 0.00151716 Jy ! Component: 400 - total flux cleaned = 0.00137412 Jy ! Total flux subtracted in 400 components = 0.00137412 Jy ! Clean residual min=-0.004327 max=0.004021 Jy/beam ! Clean residual mean=-0.000006 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 1.60744 Jy ! Adding 153 model components to the UV plane model. ! The established model now contains 269 components and 1.60743 Jy ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! Estimated beam: bmin=0.9158 mas, bmaj=2.287 mas, bpa=-6.822 degrees ! Estimated noise=0.962203 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260685 Jy ! Component: 100 - total flux cleaned = 0.000513531 Jy ! Component: 150 - total flux cleaned = 0.00137119 Jy ! Component: 200 - total flux cleaned = 0.00196202 Jy ! Component: 250 - total flux cleaned = 0.00241958 Jy ! Component: 300 - total flux cleaned = 0.00297365 Jy ! Component: 350 - total flux cleaned = 0.00330081 Jy ! Component: 400 - total flux cleaned = 0.0036221 Jy ! Total flux subtracted in 400 components = 0.0036221 Jy ! Clean residual min=-0.004253 max=0.004170 Jy/beam ! Clean residual mean=-0.000003 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 1.61106 Jy selfcal ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 337 components and 1.61106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078443Jy sigma=1.081652 ! Fit after self-cal, rms=0.078340Jy sigma=1.080746 wmodel /scr/pima/rdv62_uvs/J1522-2730_X_map.mod ! Writing 337 model components to file: /scr/pima/rdv62_uvs/J1522-2730_X_map.mod wobs /scr/pima/rdv62_uvs/J1522-2730_X_uvs.fits ! Applying 2205 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J1522-2730_X_uvs.fits wwins /scr/pima/rdv62_uvs/J1522-2730_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv62_uvs/J1522-2730_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100957 Jy ! Component: 100 - total flux cleaned = -0.00145148 Jy ! Component: 150 - total flux cleaned = -0.00152048 Jy ! Component: 200 - total flux cleaned = -0.00138465 Jy ! Component: 250 - total flux cleaned = -0.00105364 Jy ! Component: 300 - total flux cleaned = -0.000988085 Jy ! Component: 350 - total flux cleaned = -0.000735909 Jy ! Component: 400 - total flux cleaned = -0.000612723 Jy ! Component: 450 - total flux cleaned = -0.000491209 Jy ! Component: 500 - total flux cleaned = -0.000194195 Jy ! Component: 550 - total flux cleaned = 9.6981e-05 Jy ! Component: 600 - total flux cleaned = 0.000324952 Jy ! Component: 650 - total flux cleaned = 0.000607349 Jy ! Component: 700 - total flux cleaned = 0.000940238 Jy ! Component: 750 - total flux cleaned = 0.00126783 Jy ! Component: 800 - total flux cleaned = 0.00159032 Jy ! Component: 850 - total flux cleaned = 0.00169615 Jy ! Component: 900 - total flux cleaned = 0.00180137 Jy ! Component: 950 - total flux cleaned = 0.0019563 Jy ! Component: 1000 - total flux cleaned = 0.00195666 Jy ! Component: 1050 - total flux cleaned = 0.00220926 Jy ! Component: 1100 - total flux cleaned = 0.00240802 Jy ! Component: 1150 - total flux cleaned = 0.0024573 Jy ! Component: 1200 - total flux cleaned = 0.00250618 Jy ! Component: 1250 - total flux cleaned = 0.00279437 Jy ! Component: 1300 - total flux cleaned = 0.00293652 Jy ! Component: 1350 - total flux cleaned = 0.00293635 Jy ! Component: 1400 - total flux cleaned = 0.00298262 Jy ! Component: 1450 - total flux cleaned = 0.00307575 Jy ! Component: 1500 - total flux cleaned = 0.00321317 Jy ! Component: 1550 - total flux cleaned = 0.00330431 Jy ! Component: 1600 - total flux cleaned = 0.00361908 Jy ! Component: 1650 - total flux cleaned = 0.00344061 Jy ! Component: 1700 - total flux cleaned = 0.0036623 Jy ! Component: 1750 - total flux cleaned = 0.00379368 Jy ! Component: 1800 - total flux cleaned = 0.0038373 Jy ! Component: 1850 - total flux cleaned = 0.00392406 Jy ! Component: 1900 - total flux cleaned = 0.0040096 Jy ! Component: 1950 - total flux cleaned = 0.00405193 Jy ! Component: 2000 - total flux cleaned = 0.0042632 Jy ! Component: 2050 - total flux cleaned = 0.00451518 Jy ! Component: 2100 - total flux cleaned = 0.00451526 Jy ! Component: 2150 - total flux cleaned = 0.00476375 Jy ! Component: 2200 - total flux cleaned = 0.00472223 Jy ! Component: 2250 - total flux cleaned = 0.00484522 Jy ! Component: 2300 - total flux cleaned = 0.00500821 Jy ! Component: 2350 - total flux cleaned = 0.00512931 Jy ! Component: 2400 - total flux cleaned = 0.00528962 Jy ! Component: 2450 - total flux cleaned = 0.00524919 Jy ! Component: 2500 - total flux cleaned = 0.00517004 Jy ! Component: 2550 - total flux cleaned = 0.00536712 Jy ! Component: 2600 - total flux cleaned = 0.00548466 Jy ! Component: 2650 - total flux cleaned = 0.00552391 Jy ! Component: 2700 - total flux cleaned = 0.00560158 Jy ! Component: 2750 - total flux cleaned = 0.00575569 Jy ! Component: 2800 - total flux cleaned = 0.00602368 Jy ! Component: 2850 - total flux cleaned = 0.0060617 Jy ! Component: 2900 - total flux cleaned = 0.00621346 Jy ! Component: 2950 - total flux cleaned = 0.00647709 Jy ! Component: 3000 - total flux cleaned = 0.00670158 Jy ! Component: 3050 - total flux cleaned = 0.00677582 Jy ! Component: 3100 - total flux cleaned = 0.00681305 Jy ! Component: 3150 - total flux cleaned = 0.0069976 Jy ! Component: 3200 - total flux cleaned = 0.00721768 Jy ! Component: 3250 - total flux cleaned = 0.00736355 Jy ! Component: 3300 - total flux cleaned = 0.00743628 Jy ! Component: 3350 - total flux cleaned = 0.00754458 Jy ! Component: 3400 - total flux cleaned = 0.00776064 Jy ! Component: 3450 - total flux cleaned = 0.00804693 Jy ! Component: 3500 - total flux cleaned = 0.00801088 Jy ! Component: 3550 - total flux cleaned = 0.00840079 Jy ! Component: 3600 - total flux cleaned = 0.00829475 Jy ! Component: 3650 - total flux cleaned = 0.00829458 Jy ! Component: 3700 - total flux cleaned = 0.00853933 Jy ! Component: 3750 - total flux cleaned = 0.00846962 Jy ! Component: 3800 - total flux cleaned = 0.00860823 Jy ! Component: 3850 - total flux cleaned = 0.00874607 Jy ! Component: 3900 - total flux cleaned = 0.00895207 Jy ! Component: 3950 - total flux cleaned = 0.00905443 Jy ! Component: 4000 - total flux cleaned = 0.00915653 Jy ! Component: 4050 - total flux cleaned = 0.00925811 Jy ! Total flux subtracted in 4096 components = 0.0093929 Jy ! Clean residual min=-0.001972 max=0.001877 Jy/beam ! Clean residual mean=-0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 1.62045 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 629 components and 1.62045 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J1522-2730_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9158 x 2.287 at -6.822 degrees (North through East) ! Clean map min=-0.003537 max=1.4978 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J1522-2730_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 0.185% of the data. ! The x-axis pixel size should ideally be below 0.1962 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.4977 rms= 0.00059 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J1522-2730_X_uvs.log closed on Fri Nov 22 22:39:33 2013