! Started logfile: /scr/pima/rdv62_uvs/J1332+0200_X_uvs.log on Fri Nov 22 22:38:29 2013 obs /scr/pima/rdv62_uvs/J1332+0200_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J1332+0200_X_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! AN table 2: 43 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.883523 visibilities/baseline/integration-bin. ! Found source: J1332+0200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 11196 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J1332+0200_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.139417Jy sigma=7.647200 ! Fit after self-cal, rms=0.488805Jy sigma=2.793269 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 2:KK ! Flagging baselines of antenna 2:KK in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.032 mas, bpa=-9.031 degrees ! Estimated noise=2.07977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.404418 Jy ! Component: 100 - total flux cleaned = 0.523624 Jy ! Total flux subtracted in 100 components = 0.523624 Jy ! Clean residual min=-0.019685 max=0.052937 Jy/beam ! Clean residual mean=0.000019 rms=0.006359 Jy/beam ! Combined flux in latest and established models = 0.523624 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.523624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128289Jy sigma=0.936215 ! Fit after self-cal, rms=0.127970Jy sigma=0.934767 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583659 Jy ! Component: 100 - total flux cleaned = 0.0898636 Jy ! Total flux subtracted in 100 components = 0.0898636 Jy ! Clean residual min=-0.014571 max=0.030134 Jy/beam ! Clean residual mean=0.000011 rms=0.003646 Jy/beam ! Combined flux in latest and established models = 0.613487 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.613487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093763Jy sigma=0.626975 ! Fit after self-cal, rms=0.093691Jy sigma=0.625340 ! Inverting map ! Added new window around map position (-1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280566 Jy ! Component: 100 - total flux cleaned = 0.0427228 Jy ! Total flux subtracted in 100 components = 0.0427228 Jy ! Clean residual min=-0.011189 max=0.015468 Jy/beam ! Clean residual mean=0.000008 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 0.65621 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.65621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084124Jy sigma=0.544370 ! Fit after self-cal, rms=0.083484Jy sigma=0.540984 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=2.392 mas, bpa=-5.389 degrees ! Estimated noise=1.10949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163853 Jy ! Component: 100 - total flux cleaned = 0.0250648 Jy ! Component: 150 - total flux cleaned = 0.0304914 Jy ! Component: 200 - total flux cleaned = 0.0338847 Jy ! Total flux subtracted in 200 components = 0.0338847 Jy ! Clean residual min=-0.011387 max=0.012151 Jy/beam ! Clean residual mean=-0.000003 rms=0.002677 Jy/beam ! Combined flux in latest and established models = 0.690095 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.690095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080489Jy sigma=0.516396 ! Fit after self-cal, rms=0.080196Jy sigma=0.514280 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 1.01 ! LA 0.95 MK 0.99 NL 1.00 OV 1.00 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 KK 1.00* KP 1.00 ! LA 0.95 MK 0.98 NL 1.01 OV 1.01 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.00 KP 0.95 ! LA 0.94 MK 1.02 NL 0.98 OV 0.98 ! PT 1.04 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 KK 1.00* KP 0.95 ! LA 0.96 MK 1.00 NL 0.99 OV 0.98 ! PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.00 KP 0.89 ! LA 1.02 MK 1.00 NL 1.00 OV 1.04 ! PT 1.06 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.07 KK 1.00* KP 0.90 ! LA 1.02 MK 0.99 NL 1.03 OV 1.04 ! PT 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.07 KP 0.95 ! LA 0.98 MK 1.03 NL 1.03 OV 1.02 ! PT 1.05 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.10 KK 1.00* KP 0.94 ! LA 0.99 MK 1.01 NL 1.07 OV 1.03 ! PT 1.05 ! ! ! Fit before self-cal, rms=0.080196Jy sigma=0.514280 ! Fit after self-cal, rms=0.074975Jy sigma=0.457766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.112 mas, bmaj=2.386 mas, bpa=-5.175 degrees ! Estimated noise=1.10777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153767 Jy ! Component: 100 - total flux cleaned = 0.0017362 Jy ! Component: 150 - total flux cleaned = 0.00190552 Jy ! Component: 200 - total flux cleaned = 0.00213298 Jy ! Total flux subtracted in 200 components = 0.00213298 Jy ! Clean residual min=-0.006272 max=0.006827 Jy/beam ! Clean residual mean=0.000001 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.692228 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.692228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074564Jy sigma=0.456583 ! Fit after self-cal, rms=0.074572Jy sigma=0.456304 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074572Jy sigma=0.456304 ! Fit after self-cal, rms=0.074573Jy sigma=0.456210 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.112 mas, bmaj=2.386 mas, bpa=-5.174 degrees ! Estimated noise=1.10785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127831 Jy ! Component: 100 - total flux cleaned = 0.00135516 Jy ! Component: 150 - total flux cleaned = 0.00156335 Jy ! Component: 200 - total flux cleaned = 0.00169149 Jy ! Total flux subtracted in 200 components = 0.00169149 Jy ! Clean residual min=-0.006163 max=0.006638 Jy/beam ! Clean residual mean=0.000001 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.693919 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.693919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074317Jy sigma=0.455508 ! Fit after self-cal, rms=0.074302Jy sigma=0.455400 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.79991e-05 Jy ! Component: 100 - total flux cleaned = 8.47248e-05 Jy ! Component: 150 - total flux cleaned = 0.00014379 Jy ! Component: 200 - total flux cleaned = 0.000197673 Jy ! Total flux subtracted in 200 components = 0.000197673 Jy ! Clean residual min=-0.006111 max=0.006458 Jy/beam ! Clean residual mean=0.000001 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 0.694117 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.694117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074133Jy sigma=0.454946 ! Fit after self-cal, rms=0.074122Jy sigma=0.454880 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074122Jy sigma=0.454880 ! Fit after self-cal, rms=0.074070Jy sigma=0.454789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.112 mas, bmaj=2.387 mas, bpa=-5.193 degrees ! Estimated noise=1.10735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749471 Jy ! Component: 100 - total flux cleaned = 0.000859607 Jy ! Component: 150 - total flux cleaned = 0.000912244 Jy ! Component: 200 - total flux cleaned = 0.000959961 Jy ! Total flux subtracted in 200 components = 0.000959961 Jy ! Clean residual min=-0.005999 max=0.006541 Jy/beam ! Clean residual mean=0.000001 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.695077 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.695077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073928Jy sigma=0.454382 ! Fit after self-cal, rms=0.073919Jy sigma=0.454326 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.6876e-06 Jy ! Component: 100 - total flux cleaned = 7.90445e-06 Jy ! Component: 150 - total flux cleaned = -3.76847e-05 Jy ! Component: 200 - total flux cleaned = -3.66903e-05 Jy ! Total flux subtracted in 200 components = -3.66903e-05 Jy ! Clean residual min=-0.005969 max=0.006471 Jy/beam ! Clean residual mean=0.000001 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.69504 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.69504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073805Jy sigma=0.454058 ! Fit after self-cal, rms=0.073797Jy sigma=0.454024 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073797Jy sigma=0.454024 ! Fit after self-cal, rms=0.073775Jy sigma=0.453986 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=3.661 mas, bpa=9.651 degrees ! Estimated noise=1.16331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180434 Jy ! Component: 100 - total flux cleaned = 0.0015928 Jy ! Component: 150 - total flux cleaned = 0.00148194 Jy ! Component: 200 - total flux cleaned = 0.00144847 Jy ! Total flux subtracted in 200 components = 0.00144847 Jy ! Clean residual min=-0.006483 max=0.007496 Jy/beam ! Clean residual mean=0.000001 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.696489 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.696489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073796Jy sigma=0.453781 ! Fit after self-cal, rms=0.073757Jy sigma=0.453616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379442 Jy ! Component: 100 - total flux cleaned = 0.000423522 Jy ! Component: 150 - total flux cleaned = 0.000320622 Jy ! Component: 200 - total flux cleaned = 0.000228828 Jy ! Total flux subtracted in 200 components = 0.000228828 Jy ! Clean residual min=-0.006415 max=0.007273 Jy/beam ! Clean residual mean=0.000001 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.696717 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.696718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073778Jy sigma=0.453568 ! Fit after self-cal, rms=0.073752Jy sigma=0.453481 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.077956Jy sigma=0.470256 ! Fit after self-cal, rms=0.077956Jy sigma=0.470256 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.077956Jy sigma=0.470256 ! Fit after self-cal, rms=0.073667Jy sigma=0.453342 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8671 mas, bmaj=2.028 mas, bpa=-8.921 degrees ! Estimated noise=2.08267 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280949 Jy ! Component: 100 - total flux cleaned = 0.00300095 Jy ! Component: 150 - total flux cleaned = 0.00244681 Jy ! Component: 200 - total flux cleaned = 0.00194761 Jy ! Total flux subtracted in 200 components = 0.00194761 Jy ! Clean residual min=-0.007401 max=0.006224 Jy/beam ! Clean residual mean=0.000001 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.698665 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.698665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073021Jy sigma=0.449983 ! Fit after self-cal, rms=0.072985Jy sigma=0.449789 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.112 mas, bmaj=2.388 mas, bpa=-5.279 degrees ! Estimated noise=1.10697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, 4.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186217 Jy ! Component: 100 - total flux cleaned = 0.00168782 Jy ! Component: 150 - total flux cleaned = 0.00153732 Jy ! Component: 200 - total flux cleaned = 0.00140616 Jy ! Component: 250 - total flux cleaned = 0.00128961 Jy ! Component: 300 - total flux cleaned = 0.00107483 Jy ! Component: 350 - total flux cleaned = 0.000875133 Jy ! Component: 400 - total flux cleaned = 0.000780852 Jy ! Total flux subtracted in 400 components = 0.000780852 Jy ! Clean residual min=-0.005258 max=0.004297 Jy/beam ! Clean residual mean=0.000000 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.699446 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 144 components and 0.699446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071724Jy sigma=0.442751 ! Fit after self-cal, rms=0.071642Jy sigma=0.442322 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238302 Jy ! Component: 100 - total flux cleaned = -0.000341802 Jy ! Component: 150 - total flux cleaned = -0.000781708 Jy ! Component: 200 - total flux cleaned = -0.000946047 Jy ! Component: 250 - total flux cleaned = -0.00110053 Jy ! Component: 300 - total flux cleaned = -0.00117232 Jy ! Component: 350 - total flux cleaned = -0.0011712 Jy ! Component: 400 - total flux cleaned = -0.00117031 Jy ! Total flux subtracted in 400 components = -0.00117031 Jy ! Clean residual min=-0.005185 max=0.004114 Jy/beam ! Clean residual mean=0.000000 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.698276 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 171 components and 0.698276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071218Jy sigma=0.440474 ! Fit after self-cal, rms=0.071181Jy sigma=0.440313 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 65 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.075554Jy sigma=0.457376 ! Fit after self-cal, rms=0.071125Jy sigma=0.439921 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.113 mas, bmaj=2.39 mas, bpa=-5.272 degrees ! Estimated noise=1.10729 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000966977 Jy ! Component: 100 - total flux cleaned = 0.00150369 Jy ! Component: 150 - total flux cleaned = 0.00150395 Jy ! Component: 200 - total flux cleaned = 0.00156854 Jy ! Component: 250 - total flux cleaned = 0.0015679 Jy ! Component: 300 - total flux cleaned = 0.00162769 Jy ! Component: 350 - total flux cleaned = 0.00162629 Jy ! Component: 400 - total flux cleaned = 0.00168135 Jy ! Total flux subtracted in 400 components = 0.00168135 Jy ! Clean residual min=-0.005063 max=0.004032 Jy/beam ! Clean residual mean=0.000000 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.699957 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 183 components and 0.699957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070837Jy sigma=0.438743 ! Fit after self-cal, rms=0.070819Jy sigma=0.438654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.23859e-05 Jy ! Component: 100 - total flux cleaned = 7.17908e-05 Jy ! Component: 150 - total flux cleaned = 7.19969e-05 Jy ! Component: 200 - total flux cleaned = 0.000123251 Jy ! Component: 250 - total flux cleaned = 7.19124e-05 Jy ! Component: 300 - total flux cleaned = 7.20142e-05 Jy ! Component: 350 - total flux cleaned = 7.15309e-05 Jy ! Component: 400 - total flux cleaned = 0.00011952 Jy ! Total flux subtracted in 400 components = 0.00011952 Jy ! Clean residual min=-0.005002 max=0.003922 Jy/beam ! Clean residual mean=0.000000 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.700076 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 192 components and 0.700076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070624Jy sigma=0.437966 ! Fit after self-cal, rms=0.070616Jy sigma=0.437913 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070616Jy sigma=0.437913 ! Fit after self-cal, rms=0.070655Jy sigma=0.437817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=2.39 mas, bpa=-5.243 degrees ! Estimated noise=1.10788 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000786949 Jy ! Component: 100 - total flux cleaned = 0.000997394 Jy ! Component: 150 - total flux cleaned = 0.000947724 Jy ! Component: 200 - total flux cleaned = 0.00094729 Jy ! Component: 250 - total flux cleaned = 0.000902433 Jy ! Component: 300 - total flux cleaned = 0.000947208 Jy ! Component: 350 - total flux cleaned = 0.000903752 Jy ! Component: 400 - total flux cleaned = 0.000989098 Jy ! Total flux subtracted in 400 components = 0.000989098 Jy ! Clean residual min=-0.004974 max=0.003843 Jy/beam ! Clean residual mean=0.000000 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.701065 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 203 components and 0.701065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070492Jy sigma=0.437218 ! Fit after self-cal, rms=0.070486Jy sigma=0.437179 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.84006e-05 Jy ! Component: 100 - total flux cleaned = -0.000163435 Jy ! Component: 150 - total flux cleaned = -0.000163457 Jy ! Component: 200 - total flux cleaned = -0.000163495 Jy ! Component: 250 - total flux cleaned = -0.000122776 Jy ! Component: 300 - total flux cleaned = -8.26303e-05 Jy ! Component: 350 - total flux cleaned = -0.000120878 Jy ! Component: 400 - total flux cleaned = -4.34544e-05 Jy ! Total flux subtracted in 400 components = -4.34544e-05 Jy ! Clean residual min=-0.004923 max=0.003774 Jy/beam ! Clean residual mean=0.000000 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.701022 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 213 components and 0.701022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070362Jy sigma=0.436747 ! Fit after self-cal, rms=0.070357Jy sigma=0.436717 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070357Jy sigma=0.436717 ! Fit after self-cal, rms=0.069430Jy sigma=0.427958 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.661 mas, bpa=9.6 degrees ! Estimated noise=1.16304 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.65878e-05 Jy ! Component: 100 - total flux cleaned = 0.000537352 Jy ! Component: 150 - total flux cleaned = 0.00100895 Jy ! Component: 200 - total flux cleaned = 0.00100792 Jy ! Component: 250 - total flux cleaned = 0.0010081 Jy ! Component: 300 - total flux cleaned = 0.00100804 Jy ! Component: 350 - total flux cleaned = 0.00107899 Jy ! Component: 400 - total flux cleaned = 0.00114643 Jy ! Total flux subtracted in 400 components = 0.00114643 Jy ! Clean residual min=-0.005863 max=0.004745 Jy/beam ! Clean residual mean=-0.000000 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.702168 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 242 components and 0.702168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069410Jy sigma=0.427605 ! Fit after self-cal, rms=0.069398Jy sigma=0.427547 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85033e-05 Jy ! Component: 100 - total flux cleaned = -9.09264e-05 Jy ! Component: 150 - total flux cleaned = -5.81898e-05 Jy ! Component: 200 - total flux cleaned = -2.54638e-05 Jy ! Component: 250 - total flux cleaned = 3.64497e-05 Jy ! Component: 300 - total flux cleaned = 0.000122508 Jy ! Component: 350 - total flux cleaned = 0.000150083 Jy ! Component: 400 - total flux cleaned = 0.000149643 Jy ! Total flux subtracted in 400 components = 0.000149643 Jy ! Clean residual min=-0.005808 max=0.004669 Jy/beam ! Clean residual mean=-0.000000 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.702318 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 258 components and 0.702318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069392Jy sigma=0.427404 ! Fit after self-cal, rms=0.069381Jy sigma=0.427363 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=1.115 mas, bmaj=2.391 mas, bpa=-5.222 degrees ! Estimated noise=1.10858 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.115 x 2.391 at -5.222 degrees (North through East) ! Clean map min=-0.0081205 max=0.53403 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069381Jy sigma=0.427363 ! Fit after self-cal, rms=0.066592Jy sigma=0.400834 ! Inverting map and beam ! Estimated beam: bmin=1.115 mas, bmaj=2.391 mas, bpa=-5.224 degrees ! Estimated noise=1.10826 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.9023e-05 Jy ! Component: 100 - total flux cleaned = 0.000112349 Jy ! Component: 150 - total flux cleaned = 0.000332076 Jy ! Component: 200 - total flux cleaned = 0.000456582 Jy ! Component: 250 - total flux cleaned = 0.000576922 Jy ! Component: 300 - total flux cleaned = 0.000692119 Jy ! Component: 350 - total flux cleaned = 0.000729065 Jy ! Component: 400 - total flux cleaned = 0.000802113 Jy ! Total flux subtracted in 400 components = 0.000802113 Jy ! Clean residual min=-0.004758 max=0.003800 Jy/beam ! Clean residual mean=-0.000000 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.70312 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 273 components and 0.70312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066439Jy sigma=0.400397 ! Fit after self-cal, rms=0.066439Jy sigma=0.400371 ! Inverting map ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151018 Jy ! Component: 100 - total flux cleaned = -0.000150743 Jy ! Component: 150 - total flux cleaned = -4.68192e-05 Jy ! Component: 200 - total flux cleaned = 2.01307e-05 Jy ! Component: 250 - total flux cleaned = 8.4923e-05 Jy ! Component: 300 - total flux cleaned = 0.000149085 Jy ! Component: 350 - total flux cleaned = 0.000180841 Jy ! Component: 400 - total flux cleaned = 0.00024226 Jy ! Total flux subtracted in 400 components = 0.00024226 Jy ! Clean residual min=-0.004727 max=0.003758 Jy/beam ! Clean residual mean=-0.000000 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.703362 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 290 components and 0.703362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066338Jy sigma=0.400107 ! Fit after self-cal, rms=0.066339Jy sigma=0.400091 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066339Jy sigma=0.400091 ! Fit after self-cal, rms=0.066339Jy sigma=0.400062 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8696 mas, bmaj=2.031 mas, bpa=-8.857 degrees ! Estimated noise=2.08817 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.406907 Jy ! Component: 100 - total flux cleaned = 0.527587 Jy ! Component: 150 - total flux cleaned = 0.587989 Jy ! Component: 200 - total flux cleaned = 0.620618 Jy ! Component: 250 - total flux cleaned = 0.640471 Jy ! Component: 300 - total flux cleaned = 0.654503 Jy ! Component: 350 - total flux cleaned = 0.661366 Jy ! Component: 400 - total flux cleaned = 0.666665 Jy ! Total flux subtracted in 400 components = 0.666665 Jy ! Clean residual min=-0.007609 max=0.007778 Jy/beam ! Clean residual mean=0.000003 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.666666 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.666666 Jy ! Inverting map and beam ! Estimated beam: bmin=1.115 mas, bmaj=2.391 mas, bpa=-5.216 degrees ! Estimated noise=1.10823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011606 Jy ! Component: 100 - total flux cleaned = 0.0190099 Jy ! Component: 150 - total flux cleaned = 0.0217592 Jy ! Component: 200 - total flux cleaned = 0.0236413 Jy ! Component: 250 - total flux cleaned = 0.025106 Jy ! Component: 300 - total flux cleaned = 0.0262348 Jy ! Component: 350 - total flux cleaned = 0.0274275 Jy ! Component: 400 - total flux cleaned = 0.0285113 Jy ! Total flux subtracted in 400 components = 0.0285113 Jy ! Clean residual min=-0.004911 max=0.004977 Jy/beam ! Clean residual mean=-0.000001 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.695177 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 96 components and 0.695177 Jy ! Inverting map ! Added new window around map position (15.4, -22.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386027 Jy ! Component: 100 - total flux cleaned = 0.00453972 Jy ! Component: 150 - total flux cleaned = 0.00504153 Jy ! Component: 200 - total flux cleaned = 0.00562948 Jy ! Component: 250 - total flux cleaned = 0.00618134 Jy ! Component: 300 - total flux cleaned = 0.00659699 Jy ! Component: 350 - total flux cleaned = 0.00679591 Jy ! Component: 400 - total flux cleaned = 0.00708277 Jy ! Total flux subtracted in 400 components = 0.00708277 Jy ! Clean residual min=-0.004929 max=0.003860 Jy/beam ! Clean residual mean=-0.000001 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.70226 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 141 components and 0.70226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.661 mas, bpa=9.601 degrees ! Estimated noise=1.16233 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276054 Jy ! Component: 100 - total flux cleaned = 0.000502962 Jy ! Component: 150 - total flux cleaned = 0.000916081 Jy ! Component: 200 - total flux cleaned = 0.00119779 Jy ! Component: 250 - total flux cleaned = 0.00146541 Jy ! Component: 300 - total flux cleaned = 0.00171788 Jy ! Component: 350 - total flux cleaned = 0.00187895 Jy ! Component: 400 - total flux cleaned = 0.00218312 Jy ! Total flux subtracted in 400 components = 0.00218312 Jy ! Clean residual min=-0.005549 max=0.004665 Jy/beam ! Clean residual mean=-0.000002 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.704443 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143434 Jy ! Component: 100 - total flux cleaned = 0.000281515 Jy ! Component: 150 - total flux cleaned = 0.000485301 Jy ! Component: 200 - total flux cleaned = 0.000744543 Jy ! Component: 250 - total flux cleaned = 0.00093204 Jy ! Component: 300 - total flux cleaned = 0.00111281 Jy ! Component: 350 - total flux cleaned = 0.00128677 Jy ! Component: 400 - total flux cleaned = 0.00151065 Jy ! Total flux subtracted in 400 components = 0.00151065 Jy ! Clean residual min=-0.005441 max=0.004544 Jy/beam ! Clean residual mean=-0.000002 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.705954 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 207 components and 0.705954 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.115 mas, bmaj=2.391 mas, bpa=-5.216 degrees ! Estimated noise=1.10823 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524763 Jy ! Component: 100 - total flux cleaned = -0.000766345 Jy ! Component: 150 - total flux cleaned = -0.000839746 Jy ! Component: 200 - total flux cleaned = -0.000767032 Jy ! Component: 250 - total flux cleaned = -0.000631274 Jy ! Component: 300 - total flux cleaned = -0.000501869 Jy ! Component: 350 - total flux cleaned = -0.000440467 Jy ! Component: 400 - total flux cleaned = -0.000321638 Jy ! Total flux subtracted in 400 components = -0.000321638 Jy ! Clean residual min=-0.004549 max=0.003634 Jy/beam ! Clean residual mean=-0.000001 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.705632 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 248 components and 0.705632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066450Jy sigma=0.400066 ! Fit after self-cal, rms=0.066367Jy sigma=0.399672 wmodel /scr/pima/rdv62_uvs/J1332+0200_X_map.mod ! Writing 248 model components to file: /scr/pima/rdv62_uvs/J1332+0200_X_map.mod wobs /scr/pima/rdv62_uvs/J1332+0200_X_uvs.fits ! Applying 1259 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J1332+0200_X_uvs.fits wwins /scr/pima/rdv62_uvs/J1332+0200_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv62_uvs/J1332+0200_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211774 Jy ! Component: 100 - total flux cleaned = -0.00269672 Jy ! Component: 150 - total flux cleaned = -0.00315763 Jy ! Component: 200 - total flux cleaned = -0.00315817 Jy ! Component: 250 - total flux cleaned = -0.00327809 Jy ! Component: 300 - total flux cleaned = -0.00345275 Jy ! Component: 350 - total flux cleaned = -0.00345288 Jy ! Component: 400 - total flux cleaned = -0.00350918 Jy ! Component: 450 - total flux cleaned = -0.00356331 Jy ! Component: 500 - total flux cleaned = -0.00351104 Jy ! Component: 550 - total flux cleaned = -0.00335596 Jy ! Component: 600 - total flux cleaned = -0.00335536 Jy ! Component: 650 - total flux cleaned = -0.00315506 Jy ! Component: 700 - total flux cleaned = -0.00300755 Jy ! Component: 750 - total flux cleaned = -0.00291094 Jy ! Component: 800 - total flux cleaned = -0.00286244 Jy ! Component: 850 - total flux cleaned = -0.00262652 Jy ! Component: 900 - total flux cleaned = -0.00258041 Jy ! Component: 950 - total flux cleaned = -0.00258 Jy ! Component: 1000 - total flux cleaned = -0.00244452 Jy ! Component: 1050 - total flux cleaned = -0.00240041 Jy ! Component: 1100 - total flux cleaned = -0.00253234 Jy ! Component: 1150 - total flux cleaned = -0.00235852 Jy ! Component: 1200 - total flux cleaned = -0.0024018 Jy ! Component: 1250 - total flux cleaned = -0.00240182 Jy ! Component: 1300 - total flux cleaned = -0.00235938 Jy ! Component: 1350 - total flux cleaned = -0.00235944 Jy ! Component: 1400 - total flux cleaned = -0.00227688 Jy ! Component: 1450 - total flux cleaned = -0.00231813 Jy ! Component: 1500 - total flux cleaned = -0.00231819 Jy ! Component: 1550 - total flux cleaned = -0.0023183 Jy ! Component: 1600 - total flux cleaned = -0.00239726 Jy ! Component: 1650 - total flux cleaned = -0.00231808 Jy ! Component: 1700 - total flux cleaned = -0.00224017 Jy ! Component: 1750 - total flux cleaned = -0.00231743 Jy ! Component: 1800 - total flux cleaned = -0.00227913 Jy ! Component: 1850 - total flux cleaned = -0.00239255 Jy ! Component: 1900 - total flux cleaned = -0.00227993 Jy ! Component: 1950 - total flux cleaned = -0.00242864 Jy ! Component: 2000 - total flux cleaned = -0.00246572 Jy ! Component: 2050 - total flux cleaned = -0.00246595 Jy ! Component: 2100 - total flux cleaned = -0.00246625 Jy ! Component: 2150 - total flux cleaned = -0.00257429 Jy ! Component: 2200 - total flux cleaned = -0.00261002 Jy ! Component: 2250 - total flux cleaned = -0.00264558 Jy ! Component: 2300 - total flux cleaned = -0.00275097 Jy ! Component: 2350 - total flux cleaned = -0.00275109 Jy ! Component: 2400 - total flux cleaned = -0.00285482 Jy ! Component: 2450 - total flux cleaned = -0.00285473 Jy ! Component: 2500 - total flux cleaned = -0.00282031 Jy ! Component: 2550 - total flux cleaned = -0.00275268 Jy ! Component: 2600 - total flux cleaned = -0.00278664 Jy ! Component: 2650 - total flux cleaned = -0.00282013 Jy ! Component: 2700 - total flux cleaned = -0.00275368 Jy ! Component: 2750 - total flux cleaned = -0.00275376 Jy ! Component: 2800 - total flux cleaned = -0.0027537 Jy ! Component: 2850 - total flux cleaned = -0.00278628 Jy ! Component: 2900 - total flux cleaned = -0.00294744 Jy ! Component: 2950 - total flux cleaned = -0.00304353 Jy ! Component: 3000 - total flux cleaned = -0.00304353 Jy ! Component: 3050 - total flux cleaned = -0.00301208 Jy ! Component: 3100 - total flux cleaned = -0.00307497 Jy ! Component: 3150 - total flux cleaned = -0.00316885 Jy ! Component: 3200 - total flux cleaned = -0.00319992 Jy ! Component: 3250 - total flux cleaned = -0.00329251 Jy ! Component: 3300 - total flux cleaned = -0.0033233 Jy ! Component: 3350 - total flux cleaned = -0.00344511 Jy ! Component: 3400 - total flux cleaned = -0.00356608 Jy ! Component: 3450 - total flux cleaned = -0.00353596 Jy ! Component: 3500 - total flux cleaned = -0.003506 Jy ! Component: 3550 - total flux cleaned = -0.0034766 Jy ! Component: 3600 - total flux cleaned = -0.00359515 Jy ! Component: 3650 - total flux cleaned = -0.00374242 Jy ! Component: 3700 - total flux cleaned = -0.00374218 Jy ! Component: 3750 - total flux cleaned = -0.00371333 Jy ! Component: 3800 - total flux cleaned = -0.00374206 Jy ! Component: 3850 - total flux cleaned = -0.00368438 Jy ! Component: 3900 - total flux cleaned = -0.00374177 Jy ! Component: 3950 - total flux cleaned = -0.00382722 Jy ! Component: 4000 - total flux cleaned = -0.00377083 Jy ! Component: 4050 - total flux cleaned = -0.00377072 Jy ! Total flux subtracted in 4096 components = -0.00388274 Jy ! Clean residual min=-0.001644 max=0.001529 Jy/beam ! Clean residual mean=-0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.701749 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 574 components and 0.701749 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J1332+0200_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.115 x 2.391 at -5.216 degrees (North through East) ! Clean map min=-0.0076042 max=0.5371 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J1332+0200_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.537 rms= 0.00052 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J1332+0200_X_uvs.log closed on Fri Nov 22 22:38:35 2013