! Started logfile: /scr/pima/rdv62_uvs/J1130+3815_S_uvs.log on Fri Nov 22 22:36:27 2013 obs /scr/pima/rdv62_uvs/J1130+3815_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J1130+3815_S_uva.fits ! AN table 1: 23 integrations on 3 of 3 possible baselines. ! AN table 2: 15 integrations on 66 of 66 possible baselines. ! AN table 3: 3 integrations on 3 of 3 possible baselines. ! AN table 4: 6 integrations on 55 of 55 possible baselines. ! AN table 5: 7 integrations on 28 of 28 possible baselines. ! AN table 6: 9 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.469434 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1130+3815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3348 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J1130+3815_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KK self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KK self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.358847Jy sigma=11.498602 ! Fit after self-cal, rms=0.284857Jy sigma=1.682395 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:HH ! Flagging baselines of antenna 1:HH in the currently selected channels. flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:HH ! Flagging baselines of antenna 2:HH in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 2:ZC ! Flagging baselines of antenna 2:ZC in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 4:KK ! Flagging baselines of antenna 4:KK in the currently selected channels. flag 5:KK ! Flagging baselines of antenna 5:KK in the currently selected channels. flag 6:KK ! Flagging baselines of antenna 6:KK in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=4.637 mas, bpa=36.21 degrees ! Estimated noise=2.42351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.740804 Jy ! Component: 100 - total flux cleaned = 0.906682 Jy ! Total flux subtracted in 100 components = 0.906682 Jy ! Clean residual min=-0.023647 max=0.056751 Jy/beam ! Clean residual mean=-0.000119 rms=0.007449 Jy/beam ! Combined flux in latest and established models = 0.906682 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.906682 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.205982Jy sigma=1.857388 ! Fit after self-cal, rms=0.205978Jy sigma=1.855000 ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=4.615 mas, bpa=36.2 degrees ! Estimated noise=2.44581 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584091 Jy ! Component: 100 - total flux cleaned = 0.0902861 Jy ! Total flux subtracted in 100 components = 0.0902861 Jy ! Clean residual min=-0.024398 max=0.020721 Jy/beam ! Clean residual mean=-0.000109 rms=0.005821 Jy/beam ! Combined flux in latest and established models = 0.996968 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.996968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184309Jy sigma=1.586107 ! Fit after self-cal, rms=0.184289Jy sigma=1.585905 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.572 mas, bmaj=6.408 mas, bpa=41.66 degrees ! Estimated noise=1.75015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297189 Jy ! Component: 100 - total flux cleaned = 0.0447275 Jy ! Component: 150 - total flux cleaned = 0.0529559 Jy ! Component: 200 - total flux cleaned = 0.0576119 Jy ! Total flux subtracted in 200 components = 0.0576119 Jy ! Clean residual min=-0.019883 max=0.018242 Jy/beam ! Clean residual mean=0.000312 rms=0.005054 Jy/beam ! Combined flux in latest and established models = 1.05458 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 86 components and 1.05458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182044Jy sigma=1.529948 ! Fit after self-cal, rms=0.181983Jy sigma=1.529465 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HH 1.00* HN 0.95 ! KP 1.06 LA 1.16 NL 1.00 NY 1.00* ! PT 1.04 SC 0.95 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.98 HN 0.96 KK 1.00* ! KP 0.98 LA 1.11 MK 0.97 NL 1.01 ! OV 0.98 PT 1.05 SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.97 HN 0.93 KK 1.00* KP 1.10 ! LA 1.19 MK 0.94 NL 1.00 PT 1.06 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 KK 1.00* KP 1.37 LA 1.22 ! MK 0.91 OV 0.96 PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HH 1.00* HN 1.10 ! KP 1.02 LA 1.07 NL 1.04 NY 1.00* ! PT 1.00 SC 0.98 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.04 HN 1.09 KK 1.00* ! KP 1.00 LA 1.03 MK 1.02 NL 1.02 ! OV 1.03 PT 1.03 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 HN 1.03 KK 1.00* KP 1.06 ! LA 1.05 MK 0.99 NL 1.08 PT 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.08 KK 1.00* KP 1.25 LA 1.09 ! MK 0.94 OV 1.04 PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.06 HH 1.00* HN 1.02 ! KP 1.03 LA 0.83 NL 1.11 NY 1.00* ! PT 1.02 SC 1.03 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.03 HN 1.03 KK 1.00* ! KP 0.98 LA 0.83 MK 1.07 NL 1.07 ! OV 1.06 PT 1.04 SC 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 HN 1.00 KK 1.00* KP 1.07 ! LA 0.85 MK 1.02 NL 1.09 PT 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.16 KK 1.00* KP 1.33 LA 0.87 ! MK 0.98 OV 1.11 PT 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HH 1.00* HN 0.96 ! KP 0.95 LA 0.70 NL 0.99 NY 1.00* ! PT 1.00 SC 1.14 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.02 HN 1.00 KK 1.00* ! KP 0.93 LA 0.72 MK 1.01 NL 0.98 ! OV 0.90 PT 0.98 SC 1.15 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 HN 0.95 KK 1.00* KP 1.01 ! LA 0.70 MK 1.03 NL 0.99 PT 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 KK 1.00* KP 1.32 LA 0.71 ! MK 1.01 OV 0.90 PT 1.02 ! ! ! Fit before self-cal, rms=0.181983Jy sigma=1.529465 ! Fit after self-cal, rms=0.098275Jy sigma=0.763641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.562 mas, bmaj=6.378 mas, bpa=41.45 degrees ! Estimated noise=1.75592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00299081 Jy ! Component: 100 - total flux cleaned = -0.00328342 Jy ! Component: 150 - total flux cleaned = -0.00332668 Jy ! Component: 200 - total flux cleaned = -0.00336354 Jy ! Total flux subtracted in 200 components = -0.00336354 Jy ! Clean residual min=-0.005797 max=0.006448 Jy/beam ! Clean residual mean=-0.000004 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 1.05122 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 1.05122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098173Jy sigma=0.762184 ! Fit after self-cal, rms=0.098333Jy sigma=0.761590 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098333Jy sigma=0.761590 ! Fit after self-cal, rms=0.098271Jy sigma=0.761231 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.568 mas, bmaj=6.381 mas, bpa=41.4 degrees ! Estimated noise=1.75504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235013 Jy ! Component: 100 - total flux cleaned = -0.00252894 Jy ! Component: 150 - total flux cleaned = -0.00256517 Jy ! Component: 200 - total flux cleaned = -0.00256671 Jy ! Total flux subtracted in 200 components = -0.00256671 Jy ! Clean residual min=-0.005805 max=0.006249 Jy/beam ! Clean residual mean=-0.000006 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 1.04865 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 1.04865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098212Jy sigma=0.760478 ! Fit after self-cal, rms=0.098198Jy sigma=0.760399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266366 Jy ! Component: 100 - total flux cleaned = -0.000213984 Jy ! Component: 150 - total flux cleaned = -0.000190749 Jy ! Component: 200 - total flux cleaned = -0.000189641 Jy ! Total flux subtracted in 200 components = -0.000189641 Jy ! Clean residual min=-0.005782 max=0.006232 Jy/beam ! Clean residual mean=-0.000005 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 1.04846 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 1.04846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098185Jy sigma=0.760156 ! Fit after self-cal, rms=0.098180Jy sigma=0.760122 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098180Jy sigma=0.760122 ! Fit after self-cal, rms=0.098132Jy sigma=0.759810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.575 mas, bmaj=6.383 mas, bpa=41.34 degrees ! Estimated noise=1.75428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018011 Jy ! Component: 100 - total flux cleaned = -0.00207099 Jy ! Component: 150 - total flux cleaned = -0.00210137 Jy ! Component: 200 - total flux cleaned = -0.00212705 Jy ! Total flux subtracted in 200 components = -0.00212705 Jy ! Clean residual min=-0.005726 max=0.006188 Jy/beam ! Clean residual mean=-0.000006 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 1.04633 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 1.04633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098093Jy sigma=0.759413 ! Fit after self-cal, rms=0.098088Jy sigma=0.759392 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115493 Jy ! Component: 100 - total flux cleaned = -0.000113687 Jy ! Component: 150 - total flux cleaned = -0.000114074 Jy ! Component: 200 - total flux cleaned = -0.000113148 Jy ! Total flux subtracted in 200 components = -0.000113148 Jy ! Clean residual min=-0.005710 max=0.006186 Jy/beam ! Clean residual mean=-0.000006 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 1.04622 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 126 components and 1.04622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098080Jy sigma=0.759262 ! Fit after self-cal, rms=0.098077Jy sigma=0.759252 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098077Jy sigma=0.759252 ! Fit after self-cal, rms=0.098032Jy sigma=0.759034 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.105 mas, bmaj=10.48 mas, bpa=53.62 degrees ! Estimated noise=2.05726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532407 Jy ! Component: 100 - total flux cleaned = -0.000584516 Jy ! Component: 150 - total flux cleaned = -0.000583374 Jy ! Component: 200 - total flux cleaned = -0.000587072 Jy ! Total flux subtracted in 200 components = -0.000587072 Jy ! Clean residual min=-0.006336 max=0.006564 Jy/beam ! Clean residual mean=-0.000016 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 1.04563 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 131 components and 1.04563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098080Jy sigma=0.758977 ! Fit after self-cal, rms=0.098046Jy sigma=0.758671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.3441e-07 Jy ! Component: 100 - total flux cleaned = 4.80156e-05 Jy ! Component: 150 - total flux cleaned = 4.73817e-05 Jy ! Component: 200 - total flux cleaned = 4.81473e-05 Jy ! Total flux subtracted in 200 components = 4.81473e-05 Jy ! Clean residual min=-0.006289 max=0.006483 Jy/beam ! Clean residual mean=-0.000016 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 1.04568 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 131 components and 1.04568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098096Jy sigma=0.758874 ! Fit after self-cal, rms=0.098080Jy sigma=0.758731 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:BR,true ! 3:BR self-cal status=fixed weight=1 selfant 3:OV,true ! 3:OV self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:FD,true ! 4:FD self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:KP,true ! 4:KP self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:MK,true ! 4:MK self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:OV,true ! 4:OV self-cal status=fixed weight=1 selfant 4:PT,true ! 4:PT self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:MK,true ! 5:MK self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.263771Jy sigma=1.372311 ! Fit after self-cal, rms=0.181805Jy sigma=1.183934 selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KK self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KK self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.181805Jy sigma=1.183934 ! Fit after self-cal, rms=0.138684Jy sigma=0.771621 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=3.802 mas, bpa=17.11 degrees ! Estimated noise=2.36363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00611727 Jy ! Component: 100 - total flux cleaned = -0.00832202 Jy ! Component: 150 - total flux cleaned = -0.00946378 Jy ! Component: 200 - total flux cleaned = -0.0100484 Jy ! Total flux subtracted in 200 components = -0.0100484 Jy ! Clean residual min=-0.008085 max=0.008088 Jy/beam ! Clean residual mean=-0.000044 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 1.03563 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 136 components and 1.03563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138011Jy sigma=0.768785 ! Fit after self-cal, rms=0.137570Jy sigma=0.765972 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=4.678 mas, bpa=17.03 degrees ! Estimated noise=1.68167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 11.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734417 Jy ! Component: 100 - total flux cleaned = 0.00926689 Jy ! Component: 150 - total flux cleaned = 0.0102592 Jy ! Component: 200 - total flux cleaned = 0.0107535 Jy ! Component: 250 - total flux cleaned = 0.0108679 Jy ! Component: 300 - total flux cleaned = 0.010973 Jy ! Component: 350 - total flux cleaned = 0.0110726 Jy ! Component: 400 - total flux cleaned = 0.0110718 Jy ! Total flux subtracted in 400 components = 0.0110718 Jy ! Clean residual min=-0.005749 max=0.005498 Jy/beam ! Clean residual mean=-0.000043 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 1.0467 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 176 components and 1.0467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136876Jy sigma=0.759343 ! Fit after self-cal, rms=0.136842Jy sigma=0.758995 ! Inverting map ! Added new window around map position (-13.2, 3.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564413 Jy ! Component: 100 - total flux cleaned = 0.00787139 Jy ! Component: 150 - total flux cleaned = 0.00812196 Jy ! Component: 200 - total flux cleaned = 0.00823676 Jy ! Component: 250 - total flux cleaned = 0.00824042 Jy ! Component: 300 - total flux cleaned = 0.008145 Jy ! Component: 350 - total flux cleaned = 0.00805117 Jy ! Component: 400 - total flux cleaned = 0.00786682 Jy ! Total flux subtracted in 400 components = 0.00786682 Jy ! Clean residual min=-0.005861 max=0.005466 Jy/beam ! Clean residual mean=-0.000050 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.05457 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 220 components and 1.05457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136293Jy sigma=0.754605 ! Fit after self-cal, rms=0.136269Jy sigma=0.754325 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154779 Jy ! Component: 100 - total flux cleaned = 0.00136636 Jy ! Component: 150 - total flux cleaned = 0.00128084 Jy ! Component: 200 - total flux cleaned = 0.00111703 Jy ! Component: 250 - total flux cleaned = 0.000956943 Jy ! Component: 300 - total flux cleaned = 0.000880245 Jy ! Component: 350 - total flux cleaned = 0.000726543 Jy ! Component: 400 - total flux cleaned = 0.000577674 Jy ! Total flux subtracted in 400 components = 0.000577674 Jy ! Clean residual min=-0.005826 max=0.005285 Jy/beam ! Clean residual mean=-0.000051 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 1.05515 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 231 components and 1.05515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136006Jy sigma=0.752714 ! Fit after self-cal, rms=0.136003Jy sigma=0.752664 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 97 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 33 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 97 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 33 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 97 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 33 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! A total of 97 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 33 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.236097Jy sigma=1.203729 ! Fit after self-cal, rms=0.135270Jy sigma=0.750411 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=4.686 mas, bpa=17.02 degrees ! Estimated noise=1.68027 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257091 Jy ! Component: 100 - total flux cleaned = -2.57883e-05 Jy ! Component: 150 - total flux cleaned = 0.000278489 Jy ! Component: 200 - total flux cleaned = 0.000551133 Jy ! Component: 250 - total flux cleaned = 0.000886244 Jy ! Component: 300 - total flux cleaned = 0.00104453 Jy ! Component: 350 - total flux cleaned = 0.00112103 Jy ! Component: 400 - total flux cleaned = 0.00126171 Jy ! Total flux subtracted in 400 components = 0.00126171 Jy ! Clean residual min=-0.005478 max=0.004708 Jy/beam ! Clean residual mean=-0.000042 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 1.05641 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 243 components and 1.05641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134916Jy sigma=0.748002 ! Fit after self-cal, rms=0.134917Jy sigma=0.747917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000790389 Jy ! Component: 100 - total flux cleaned = 0.000858134 Jy ! Component: 150 - total flux cleaned = 0.000857978 Jy ! Component: 200 - total flux cleaned = 0.000857927 Jy ! Component: 250 - total flux cleaned = 0.000858576 Jy ! Component: 300 - total flux cleaned = 0.00079899 Jy ! Component: 350 - total flux cleaned = 0.000798944 Jy ! Component: 400 - total flux cleaned = 0.000743035 Jy ! Total flux subtracted in 400 components = 0.000743035 Jy ! Clean residual min=-0.005362 max=0.004695 Jy/beam ! Clean residual mean=-0.000042 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 1.05715 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 259 components and 1.05715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134756Jy sigma=0.746993 ! Fit after self-cal, rms=0.134756Jy sigma=0.746959 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134756Jy sigma=0.746959 ! Fit after self-cal, rms=0.134478Jy sigma=0.746318 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=4.69 mas, bpa=16.97 degrees ! Estimated noise=1.6793 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000784895 Jy ! Component: 100 - total flux cleaned = -0.000705581 Jy ! Component: 150 - total flux cleaned = -0.000563544 Jy ! Component: 200 - total flux cleaned = -0.000364863 Jy ! Component: 250 - total flux cleaned = -0.000178709 Jy ! Component: 300 - total flux cleaned = -4.53485e-06 Jy ! Component: 350 - total flux cleaned = 0.000107681 Jy ! Component: 400 - total flux cleaned = 0.000160236 Jy ! Total flux subtracted in 400 components = 0.000160236 Jy ! Clean residual min=-0.005154 max=0.004466 Jy/beam ! Clean residual mean=-0.000038 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 1.05731 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 264 components and 1.05731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134276Jy sigma=0.745068 ! Fit after self-cal, rms=0.134279Jy sigma=0.745035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415189 Jy ! Component: 100 - total flux cleaned = 0.00041571 Jy ! Component: 150 - total flux cleaned = 0.000366922 Jy ! Component: 200 - total flux cleaned = 0.00036688 Jy ! Component: 250 - total flux cleaned = 0.000366576 Jy ! Component: 300 - total flux cleaned = 0.000319215 Jy ! Component: 350 - total flux cleaned = 0.000273764 Jy ! Component: 400 - total flux cleaned = 0.000273538 Jy ! Total flux subtracted in 400 components = 0.000273538 Jy ! Clean residual min=-0.005095 max=0.004443 Jy/beam ! Clean residual mean=-0.000038 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 1.05759 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 278 components and 1.05759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134172Jy sigma=0.744512 ! Fit after self-cal, rms=0.134172Jy sigma=0.744493 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134172Jy sigma=0.744493 ! Fit after self-cal, rms=0.131754Jy sigma=0.730331 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.851 mas, bmaj=10.2 mas, bpa=48.6 degrees ! Estimated noise=1.99639 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000477022 Jy ! Component: 100 - total flux cleaned = -0.000421606 Jy ! Component: 150 - total flux cleaned = -0.000461003 Jy ! Component: 200 - total flux cleaned = -0.00056937 Jy ! Component: 250 - total flux cleaned = -0.000666921 Jy ! Component: 300 - total flux cleaned = -0.000754755 Jy ! Component: 350 - total flux cleaned = -0.000833963 Jy ! Component: 400 - total flux cleaned = -0.000882818 Jy ! Total flux subtracted in 400 components = -0.000882818 Jy ! Clean residual min=-0.004607 max=0.004582 Jy/beam ! Clean residual mean=-0.000051 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 1.0567 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 315 components and 1.0567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131755Jy sigma=0.729995 ! Fit after self-cal, rms=0.131742Jy sigma=0.729927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-95.6, -63.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250009 Jy ! Component: 100 - total flux cleaned = -7.95943e-05 Jy ! Component: 150 - total flux cleaned = -0.000350484 Jy ! Component: 200 - total flux cleaned = -0.000556697 Jy ! Component: 250 - total flux cleaned = -0.000616224 Jy ! Component: 300 - total flux cleaned = -0.000732012 Jy ! Component: 350 - total flux cleaned = -0.00089327 Jy ! Component: 400 - total flux cleaned = -0.000894008 Jy ! Total flux subtracted in 400 components = -0.000894008 Jy ! Clean residual min=-0.005038 max=0.003649 Jy/beam ! Clean residual mean=-0.000037 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 1.05581 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 367 components and 1.05581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131581Jy sigma=0.727550 ! Fit after self-cal, rms=0.131564Jy sigma=0.727364 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=4.694 mas, bpa=16.92 degrees ! Estimated noise=1.67893 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.682 x 4.694 at 16.92 degrees (North through East) ! Clean map min=-0.0046439 max=0.93486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131564Jy sigma=0.727364 ! Fit after self-cal, rms=0.122567Jy sigma=0.656765 ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=4.697 mas, bpa=16.91 degrees ! Estimated noise=1.67884 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000864509 Jy ! Component: 100 - total flux cleaned = -0.00111924 Jy ! Component: 150 - total flux cleaned = -0.00123444 Jy ! Component: 200 - total flux cleaned = -0.00134483 Jy ! Component: 250 - total flux cleaned = -0.00144721 Jy ! Component: 300 - total flux cleaned = -0.00144735 Jy ! Component: 350 - total flux cleaned = -0.00154274 Jy ! Component: 400 - total flux cleaned = -0.00154486 Jy ! Total flux subtracted in 400 components = -0.00154486 Jy ! Clean residual min=-0.004042 max=0.003870 Jy/beam ! Clean residual mean=-0.000002 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 1.05427 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 427 components and 1.05427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122009Jy sigma=0.653783 ! Fit after self-cal, rms=0.122007Jy sigma=0.653708 ! Inverting map ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.66688e-05 Jy ! Component: 100 - total flux cleaned = -9.90862e-05 Jy ! Component: 150 - total flux cleaned = -9.95968e-05 Jy ! Component: 200 - total flux cleaned = -9.97866e-05 Jy ! Component: 250 - total flux cleaned = -0.000100091 Jy ! Component: 300 - total flux cleaned = -1.91522e-05 Jy ! Component: 350 - total flux cleaned = 5.85566e-05 Jy ! Component: 400 - total flux cleaned = 0.000136141 Jy ! Total flux subtracted in 400 components = 0.000136141 Jy ! Clean residual min=-0.003978 max=0.003780 Jy/beam ! Clean residual mean=0.000000 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 1.0544 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 456 components and 1.0544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121661Jy sigma=0.652168 ! Fit after self-cal, rms=0.121664Jy sigma=0.652148 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121664Jy sigma=0.652148 ! Fit after self-cal, rms=0.121523Jy sigma=0.651949 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=3.819 mas, bpa=17 degrees ! Estimated noise=2.36536 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.731555 Jy ! Component: 100 - total flux cleaned = 0.891941 Jy ! Component: 150 - total flux cleaned = 0.944241 Jy ! Component: 200 - total flux cleaned = 0.97201 Jy ! Component: 250 - total flux cleaned = 0.989606 Jy ! Component: 300 - total flux cleaned = 1.00207 Jy ! Component: 350 - total flux cleaned = 1.01128 Jy ! Component: 400 - total flux cleaned = 1.01834 Jy ! Total flux subtracted in 400 components = 1.01834 Jy ! Clean residual min=-0.007170 max=0.006728 Jy/beam ! Clean residual mean=-0.000035 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 1.01834 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 1.01834 Jy ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=4.698 mas, bpa=16.89 degrees ! Estimated noise=1.67846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128158 Jy ! Component: 100 - total flux cleaned = 0.020217 Jy ! Component: 150 - total flux cleaned = 0.0238149 Jy ! Component: 200 - total flux cleaned = 0.026289 Jy ! Component: 250 - total flux cleaned = 0.027723 Jy ! Component: 300 - total flux cleaned = 0.0285244 Jy ! Component: 350 - total flux cleaned = 0.0291141 Jy ! Component: 400 - total flux cleaned = 0.0298093 Jy ! Total flux subtracted in 400 components = 0.0298093 Jy ! Clean residual min=-0.004627 max=0.004070 Jy/beam ! Clean residual mean=0.000009 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 1.04815 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 136 components and 1.04815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.862 mas, bmaj=10.21 mas, bpa=48.51 degrees ! Estimated noise=1.99399 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324205 Jy ! Component: 100 - total flux cleaned = 0.00464941 Jy ! Component: 150 - total flux cleaned = 0.00539664 Jy ! Component: 200 - total flux cleaned = 0.00567583 Jy ! Component: 250 - total flux cleaned = 0.00584449 Jy ! Component: 300 - total flux cleaned = 0.00607836 Jy ! Component: 350 - total flux cleaned = 0.00629606 Jy ! Component: 400 - total flux cleaned = 0.0063641 Jy ! Total flux subtracted in 400 components = 0.0063641 Jy ! Clean residual min=-0.005119 max=0.003645 Jy/beam ! Clean residual mean=0.000011 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 1.05452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.12163e-06 Jy ! Component: 100 - total flux cleaned = -1.96809e-06 Jy ! Component: 150 - total flux cleaned = -6.03938e-05 Jy ! Component: 200 - total flux cleaned = -3.41984e-06 Jy ! Component: 250 - total flux cleaned = 4.90611e-05 Jy ! Component: 300 - total flux cleaned = -5.60712e-06 Jy ! Component: 350 - total flux cleaned = -6.44269e-06 Jy ! Component: 400 - total flux cleaned = 4.07384e-05 Jy ! Total flux subtracted in 400 components = 4.07384e-05 Jy ! Clean residual min=-0.004946 max=0.003520 Jy/beam ! Clean residual mean=0.000014 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 1.05456 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 253 components and 1.05456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=4.698 mas, bpa=16.89 degrees ! Estimated noise=1.67846 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000622327 Jy ! Component: 100 - total flux cleaned = -0.000967776 Jy ! Component: 150 - total flux cleaned = -0.00129383 Jy ! Component: 200 - total flux cleaned = -0.00160113 Jy ! Component: 250 - total flux cleaned = -0.00150157 Jy ! Component: 300 - total flux cleaned = -0.00169296 Jy ! Component: 350 - total flux cleaned = -0.00160095 Jy ! Component: 400 - total flux cleaned = -0.00169079 Jy ! Total flux subtracted in 400 components = -0.00169079 Jy ! Clean residual min=-0.004111 max=0.004074 Jy/beam ! Clean residual mean=0.000009 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 1.05287 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 300 components and 1.05287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121787Jy sigma=0.653805 ! Fit after self-cal, rms=0.121752Jy sigma=0.653389 wmodel /scr/pima/rdv62_uvs/J1130+3815_S_map.mod ! Writing 300 model components to file: /scr/pima/rdv62_uvs/J1130+3815_S_map.mod wobs /scr/pima/rdv62_uvs/J1130+3815_S_uvs.fits ! Applying 1160 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J1130+3815_S_uvs.fits wwins /scr/pima/rdv62_uvs/J1130+3815_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv62_uvs/J1130+3815_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161995 Jy ! Component: 100 - total flux cleaned = -0.00248684 Jy ! Component: 150 - total flux cleaned = -0.00311049 Jy ! Component: 200 - total flux cleaned = -0.00364556 Jy ! Component: 250 - total flux cleaned = -0.00410071 Jy ! Component: 300 - total flux cleaned = -0.00448122 Jy ! Component: 350 - total flux cleaned = -0.0047295 Jy ! Component: 400 - total flux cleaned = -0.00497372 Jy ! Component: 450 - total flux cleaned = -0.00515458 Jy ! Component: 500 - total flux cleaned = -0.0053322 Jy ! Component: 550 - total flux cleaned = -0.00544841 Jy ! Component: 600 - total flux cleaned = -0.00539174 Jy ! Component: 650 - total flux cleaned = -0.00550545 Jy ! Component: 700 - total flux cleaned = -0.00578331 Jy ! Component: 750 - total flux cleaned = -0.00589126 Jy ! Component: 800 - total flux cleaned = -0.00578203 Jy ! Component: 850 - total flux cleaned = -0.0058352 Jy ! Component: 900 - total flux cleaned = -0.00583484 Jy ! Component: 950 - total flux cleaned = -0.00588696 Jy ! Component: 1000 - total flux cleaned = -0.00588762 Jy ! Component: 1050 - total flux cleaned = -0.00604162 Jy ! Component: 1100 - total flux cleaned = -0.00609225 Jy ! Component: 1150 - total flux cleaned = -0.00634372 Jy ! Component: 1200 - total flux cleaned = -0.00634396 Jy ! Component: 1250 - total flux cleaned = -0.00659144 Jy ! Component: 1300 - total flux cleaned = -0.00659163 Jy ! Component: 1350 - total flux cleaned = -0.00683501 Jy ! Component: 1400 - total flux cleaned = -0.00683518 Jy ! Component: 1450 - total flux cleaned = -0.00702671 Jy ! Component: 1500 - total flux cleaned = -0.00716944 Jy ! Component: 1550 - total flux cleaned = -0.00731011 Jy ! Component: 1600 - total flux cleaned = -0.00721652 Jy ! Component: 1650 - total flux cleaned = -0.00730993 Jy ! Component: 1700 - total flux cleaned = -0.00749482 Jy ! Component: 1750 - total flux cleaned = -0.00763162 Jy ! Component: 1800 - total flux cleaned = -0.00754124 Jy ! Component: 1850 - total flux cleaned = -0.00785715 Jy ! Component: 1900 - total flux cleaned = -0.00799169 Jy ! Component: 1950 - total flux cleaned = -0.00799212 Jy ! Component: 2000 - total flux cleaned = -0.00812509 Jy ! Component: 2050 - total flux cleaned = -0.00830081 Jy ! Component: 2100 - total flux cleaned = -0.00834472 Jy ! Component: 2150 - total flux cleaned = -0.00843207 Jy ! Component: 2200 - total flux cleaned = -0.00856137 Jy ! Component: 2250 - total flux cleaned = -0.00864676 Jy ! Component: 2300 - total flux cleaned = -0.00877477 Jy ! Component: 2350 - total flux cleaned = -0.00885944 Jy ! Component: 2400 - total flux cleaned = -0.00894355 Jy ! Component: 2450 - total flux cleaned = -0.0090272 Jy ! Component: 2500 - total flux cleaned = -0.00906903 Jy ! Component: 2550 - total flux cleaned = -0.00911025 Jy ! Component: 2600 - total flux cleaned = -0.00923366 Jy ! Component: 2650 - total flux cleaned = -0.00923355 Jy ! Component: 2700 - total flux cleaned = -0.0093557 Jy ! Component: 2750 - total flux cleaned = -0.00943661 Jy ! Component: 2800 - total flux cleaned = -0.00935643 Jy ! Component: 2850 - total flux cleaned = -0.00955639 Jy ! Component: 2900 - total flux cleaned = -0.00947672 Jy ! Component: 2950 - total flux cleaned = -0.00947683 Jy ! Component: 3000 - total flux cleaned = -0.0094769 Jy ! Component: 3050 - total flux cleaned = -0.00963378 Jy ! Component: 3100 - total flux cleaned = -0.00947791 Jy ! Component: 3150 - total flux cleaned = -0.00959457 Jy ! Component: 3200 - total flux cleaned = -0.00959422 Jy ! Component: 3250 - total flux cleaned = -0.00959455 Jy ! Component: 3300 - total flux cleaned = -0.00967077 Jy ! Component: 3350 - total flux cleaned = -0.00944295 Jy ! Component: 3400 - total flux cleaned = -0.00959394 Jy ! Component: 3450 - total flux cleaned = -0.00951877 Jy ! Component: 3500 - total flux cleaned = -0.00944377 Jy ! Component: 3550 - total flux cleaned = -0.00948097 Jy ! Component: 3600 - total flux cleaned = -0.00948108 Jy ! Component: 3650 - total flux cleaned = -0.00940758 Jy ! Component: 3700 - total flux cleaned = -0.00933409 Jy ! Component: 3750 - total flux cleaned = -0.00940711 Jy ! Component: 3800 - total flux cleaned = -0.00933413 Jy ! Component: 3850 - total flux cleaned = -0.00937036 Jy ! Component: 3900 - total flux cleaned = -0.00937043 Jy ! Component: 3950 - total flux cleaned = -0.00915493 Jy ! Component: 4000 - total flux cleaned = -0.00915494 Jy ! Component: 4050 - total flux cleaned = -0.00915491 Jy ! Total flux subtracted in 4096 components = -0.00901317 Jy ! Clean residual min=-0.002274 max=0.002158 Jy/beam ! Clean residual mean=0.000039 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 1.04385 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 561 components and 1.04386 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J1130+3815_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.68 x 4.698 at 16.89 degrees (North through East) ! Clean map min=-0.0046434 max=0.93953 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J1130+3815_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.9395 rms= 0.00061 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J1130+3815_S_uvs.log closed on Fri Nov 22 22:36:34 2013