! Started logfile: /scr/pima/rdv62_uvs/J0501-0159_X_uvs.log on Fri Nov 22 22:33:18 2013 obs /scr/pima/rdv62_uvs/J0501-0159_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J0501-0159_X_uva.fits ! AN table 1: 5 integrations on 15 of 15 possible baselines. ! AN table 2: 4 integrations on 55 of 55 possible baselines. ! AN table 3: 7 integrations on 45 of 45 possible baselines. ! AN table 4: 16 integrations on 21 of 21 possible baselines. ! AN table 5: 3 integrations on 1 of 1 possible baselines. ! AN table 6: 8 integrations on 1 of 1 possible baselines. ! AN table 7: 14 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.610951 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2544 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J0501-0159_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:KK self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:HH self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.304315Jy sigma=11.204009 ! Fit after self-cal, rms=0.260137Jy sigma=1.833242 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 2:KK ! Flagging baselines of antenna 2:KK in the currently selected channels. flag 4:KK ! Flagging baselines of antenna 4:KK in the currently selected channels. flag 5:HH ! Flagging baselines of antenna 5:HH in the currently selected channels. flag 5:ZC ! Flagging baselines of antenna 5:ZC in the currently selected channels. flag 6:HH ! Flagging baselines of antenna 6:HH in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:HH ! Flagging baselines of antenna 7:HH in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8999 mas, bmaj=1.986 mas, bpa=-3.268 degrees ! Estimated noise=2.45013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.616785 Jy ! Component: 100 - total flux cleaned = 0.752724 Jy ! Total flux subtracted in 100 components = 0.752724 Jy ! Clean residual min=-0.015235 max=0.043262 Jy/beam ! Clean residual mean=0.000015 rms=0.004289 Jy/beam ! Combined flux in latest and established models = 0.752724 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.752724 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.127667Jy sigma=1.238553 ! Fit after self-cal, rms=0.127621Jy sigma=1.238271 ! Inverting map and beam ! Estimated beam: bmin=0.8999 mas, bmaj=1.986 mas, bpa=-3.268 degrees ! Estimated noise=2.45013 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427884 Jy ! Component: 100 - total flux cleaned = 0.0625682 Jy ! Total flux subtracted in 100 components = 0.0625682 Jy ! Clean residual min=-0.012274 max=0.021000 Jy/beam ! Clean residual mean=0.000013 rms=0.003323 Jy/beam ! Combined flux in latest and established models = 0.815293 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.815293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107297Jy sigma=1.008418 ! Fit after self-cal, rms=0.107310Jy sigma=1.008362 ! Inverting map ! Added new window around map position (-4.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203508 Jy ! Component: 100 - total flux cleaned = 0.0333168 Jy ! Total flux subtracted in 100 components = 0.0333168 Jy ! Clean residual min=-0.010902 max=0.013345 Jy/beam ! Clean residual mean=0.000009 rms=0.002981 Jy/beam ! Combined flux in latest and established models = 0.848609 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.848609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101483Jy sigma=0.934356 ! Fit after self-cal, rms=0.101289Jy sigma=0.932599 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.205 mas, bmaj=2.409 mas, bpa=-6.466 degrees ! Estimated noise=1.77298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233559 Jy ! Component: 100 - total flux cleaned = 0.0379789 Jy ! Component: 150 - total flux cleaned = 0.0480267 Jy ! Component: 200 - total flux cleaned = 0.0552894 Jy ! Total flux subtracted in 200 components = 0.0552894 Jy ! Clean residual min=-0.012397 max=0.015460 Jy/beam ! Clean residual mean=0.000021 rms=0.003977 Jy/beam ! Combined flux in latest and established models = 0.903899 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 74 components and 0.903899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096904Jy sigma=0.858415 ! Fit after self-cal, rms=0.096732Jy sigma=0.856615 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.04 KP 0.98 LA 0.92 ! NL 1.00 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 0.98 KK 1.00* ! KP 1.00 LA 0.96 MK 1.00 NL 1.00 ! OV 1.01 PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 1.02 KP 0.97 ! LA 0.92 MK 0.98 NL 1.02 OV 0.99 ! PT 0.94 SC 1.12 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 KK 1.00* KP 1.03 LA 1.00 ! MK 0.95 OV 0.99 PT 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.08 KP 0.93 LA 0.93 ! NL 0.99 PT 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.00 KK 1.00* ! KP 0.96 LA 0.95 MK 1.01 NL 0.96 ! OV 0.98 PT 1.03 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 1.04 KP 0.93 ! LA 0.91 MK 0.99 NL 1.02 OV 0.95 ! PT 1.01 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 KK 1.00* KP 0.96 LA 1.00 ! MK 0.97 OV 0.97 PT 1.10 ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 HN 1.07 KP 0.88 LA 0.98 ! NL 1.03 PT 1.08 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.06 HN 0.98 KK 1.00* ! KP 0.90 LA 1.03 MK 1.03 NL 1.01 ! OV 1.07 PT 1.04 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.03 HN 1.01 KP 0.87 ! LA 0.99 MK 0.99 NL 1.03 OV 1.04 ! PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 KK 1.00* KP 0.95 LA 1.08 ! MK 0.97 OV 1.03 PT 1.14 ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.13 HN 1.13 KP 0.94 LA 0.97 ! NL 1.03 PT 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.06 HN 1.06 KK 1.00* ! KP 0.97 LA 0.99 MK 1.06 NL 1.05 ! OV 1.03 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.06 HN 1.10 KP 0.92 ! LA 0.98 MK 1.02 NL 1.06 OV 1.00 ! PT 1.01 SC 1.16 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 KK 1.00* KP 0.99 LA 1.08 ! MK 0.99 OV 1.01 PT 1.13 ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.096732Jy sigma=0.856615 ! Fit after self-cal, rms=0.076688Jy sigma=0.644952 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.226 mas, bmaj=2.426 mas, bpa=-6.413 degrees ! Estimated noise=1.77486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446358 Jy ! Component: 100 - total flux cleaned = 0.00507041 Jy ! Component: 150 - total flux cleaned = 0.00498377 Jy ! Component: 200 - total flux cleaned = 0.00505966 Jy ! Total flux subtracted in 200 components = 0.00505966 Jy ! Clean residual min=-0.005590 max=0.005987 Jy/beam ! Clean residual mean=0.000003 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.908958 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.908958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076399Jy sigma=0.641087 ! Fit after self-cal, rms=0.076426Jy sigma=0.640687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076426Jy sigma=0.640687 ! Fit after self-cal, rms=0.076369Jy sigma=0.640302 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.226 mas, bmaj=2.427 mas, bpa=-6.408 degrees ! Estimated noise=1.77365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152897 Jy ! Component: 100 - total flux cleaned = 0.0017574 Jy ! Component: 150 - total flux cleaned = 0.00181739 Jy ! Component: 200 - total flux cleaned = 0.00181639 Jy ! Total flux subtracted in 200 components = 0.00181639 Jy ! Clean residual min=-0.005525 max=0.005714 Jy/beam ! Clean residual mean=0.000003 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.910775 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.910775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076258Jy sigma=0.638886 ! Fit after self-cal, rms=0.076251Jy sigma=0.638802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494547 Jy ! Component: 100 - total flux cleaned = 0.00613343 Jy ! Component: 150 - total flux cleaned = 0.0059734 Jy ! Component: 200 - total flux cleaned = 0.00568653 Jy ! Total flux subtracted in 200 components = 0.00568653 Jy ! Clean residual min=-0.005142 max=0.005214 Jy/beam ! Clean residual mean=0.000002 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.916461 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.916461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075924Jy sigma=0.635158 ! Fit after self-cal, rms=0.075890Jy sigma=0.634845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075890Jy sigma=0.634845 ! Fit after self-cal, rms=0.075764Jy sigma=0.633977 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.227 mas, bmaj=2.426 mas, bpa=-6.385 degrees ! Estimated noise=1.77244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274088 Jy ! Component: 100 - total flux cleaned = 0.0031265 Jy ! Component: 150 - total flux cleaned = 0.00319417 Jy ! Component: 200 - total flux cleaned = 0.00319604 Jy ! Total flux subtracted in 200 components = 0.00319604 Jy ! Clean residual min=-0.004987 max=0.004834 Jy/beam ! Clean residual mean=0.000002 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.919657 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.919657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075619Jy sigma=0.632266 ! Fit after self-cal, rms=0.075607Jy sigma=0.632165 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000733511 Jy ! Component: 100 - total flux cleaned = 0.000679969 Jy ! Component: 150 - total flux cleaned = 0.000628673 Jy ! Component: 200 - total flux cleaned = 0.000580223 Jy ! Total flux subtracted in 200 components = 0.000580223 Jy ! Clean residual min=-0.004965 max=0.004763 Jy/beam ! Clean residual mean=0.000002 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.920237 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.920237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075546Jy sigma=0.631564 ! Fit after self-cal, rms=0.075544Jy sigma=0.631551 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075544Jy sigma=0.631551 ! Fit after self-cal, rms=0.075476Jy sigma=0.631239 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=3.516 mas, bpa=-2.557 degrees ! Estimated noise=1.99006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105486 Jy ! Component: 100 - total flux cleaned = 0.00119545 Jy ! Component: 150 - total flux cleaned = 0.00123333 Jy ! Component: 200 - total flux cleaned = 0.00123262 Jy ! Total flux subtracted in 200 components = 0.00123262 Jy ! Clean residual min=-0.005795 max=0.005045 Jy/beam ! Clean residual mean=0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.92147 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.92147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075444Jy sigma=0.630735 ! Fit after self-cal, rms=0.075439Jy sigma=0.630698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367484 Jy ! Component: 100 - total flux cleaned = 0.000366849 Jy ! Component: 150 - total flux cleaned = 0.000368167 Jy ! Component: 200 - total flux cleaned = 0.00036868 Jy ! Total flux subtracted in 200 components = 0.00036868 Jy ! Clean residual min=-0.005775 max=0.005002 Jy/beam ! Clean residual mean=0.000002 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.921839 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.921839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075427Jy sigma=0.630510 ! Fit after self-cal, rms=0.075426Jy sigma=0.630503 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:BR,true ! 3:BR self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:MK,true ! 3:MK self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:OV,true ! 3:OV self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:KP,true ! 4:KP self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:MK,true ! 4:MK self-cal status=fixed weight=1 selfant 4:OV,true ! 4:OV self-cal status=fixed weight=1 selfant 4:PT,true ! 4:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.224052Jy sigma=1.243550 ! Fit after self-cal, rms=0.147877Jy sigma=0.992948 selfant "",false ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:KK self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:HH self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 42 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 42 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 42 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 42 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.147877Jy sigma=0.992948 ! Fit after self-cal, rms=0.106804Jy sigma=0.618871 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.8371 mas, bmaj=1.595 mas, bpa=-3.221 degrees ! Estimated noise=2.45507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168294 Jy ! Component: 100 - total flux cleaned = -0.0026287 Jy ! Component: 150 - total flux cleaned = -0.00367491 Jy ! Component: 200 - total flux cleaned = -0.00450271 Jy ! Total flux subtracted in 200 components = -0.00450271 Jy ! Clean residual min=-0.006343 max=0.006119 Jy/beam ! Clean residual mean=0.000004 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.917336 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 141 components and 0.917336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106630Jy sigma=0.618647 ! Fit after self-cal, rms=0.106513Jy sigma=0.618182 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.064 mas, bmaj=1.762 mas, bpa=-5.66 degrees ! Estimated noise=1.76563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148888 Jy ! Component: 100 - total flux cleaned = 0.00176713 Jy ! Component: 150 - total flux cleaned = 0.00186407 Jy ! Component: 200 - total flux cleaned = 0.00195587 Jy ! Component: 250 - total flux cleaned = 0.0019984 Jy ! Component: 300 - total flux cleaned = 0.00203869 Jy ! Component: 350 - total flux cleaned = 0.00207774 Jy ! Component: 400 - total flux cleaned = 0.00207889 Jy ! Total flux subtracted in 400 components = 0.00207889 Jy ! Clean residual min=-0.004904 max=0.004575 Jy/beam ! Clean residual mean=0.000015 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.919415 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 164 components and 0.919415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106360Jy sigma=0.617438 ! Fit after self-cal, rms=0.106363Jy sigma=0.617416 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241899 Jy ! Component: 100 - total flux cleaned = 0.000277655 Jy ! Component: 150 - total flux cleaned = 0.000311396 Jy ! Component: 200 - total flux cleaned = 0.000343363 Jy ! Component: 250 - total flux cleaned = 0.000343215 Jy ! Component: 300 - total flux cleaned = 0.000374789 Jy ! Component: 350 - total flux cleaned = 0.000374782 Jy ! Component: 400 - total flux cleaned = 0.000403991 Jy ! Total flux subtracted in 400 components = 0.000403991 Jy ! Clean residual min=-0.004873 max=0.004517 Jy/beam ! Clean residual mean=0.000015 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.919819 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 0.919819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106272Jy sigma=0.617161 ! Fit after self-cal, rms=0.106281Jy sigma=0.617157 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 17 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.219022Jy sigma=1.208147 ! Fit after self-cal, rms=0.106282Jy sigma=0.616978 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.065 mas, bmaj=1.763 mas, bpa=-5.673 degrees ! Estimated noise=1.76425 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677133 Jy ! Component: 100 - total flux cleaned = -0.000859215 Jy ! Component: 150 - total flux cleaned = -0.000957078 Jy ! Component: 200 - total flux cleaned = -0.00101865 Jy ! Component: 250 - total flux cleaned = -0.00104743 Jy ! Component: 300 - total flux cleaned = -0.00104699 Jy ! Component: 350 - total flux cleaned = -0.00104678 Jy ! Component: 400 - total flux cleaned = -0.00107349 Jy ! Total flux subtracted in 400 components = -0.00107349 Jy ! Clean residual min=-0.004885 max=0.004365 Jy/beam ! Clean residual mean=0.000015 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.918746 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 184 components and 0.918745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106188Jy sigma=0.616751 ! Fit after self-cal, rms=0.106190Jy sigma=0.616743 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78368e-06 Jy ! Component: 100 - total flux cleaned = -3.53716e-06 Jy ! Component: 150 - total flux cleaned = -3.32217e-06 Jy ! Component: 200 - total flux cleaned = -4.01709e-06 Jy ! Component: 250 - total flux cleaned = -4.2586e-06 Jy ! Component: 300 - total flux cleaned = -3.85435e-06 Jy ! Component: 350 - total flux cleaned = -2.72873e-05 Jy ! Component: 400 - total flux cleaned = -2.76526e-05 Jy ! Total flux subtracted in 400 components = -2.76526e-05 Jy ! Clean residual min=-0.004868 max=0.004357 Jy/beam ! Clean residual mean=0.000015 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.918718 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 0.918718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106141Jy sigma=0.616591 ! Fit after self-cal, rms=0.106145Jy sigma=0.616589 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106145Jy sigma=0.616589 ! Fit after self-cal, rms=0.106748Jy sigma=0.617015 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.764 mas, bpa=-5.645 degrees ! Estimated noise=1.76462 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739544 Jy ! Component: 100 - total flux cleaned = -0.000816912 Jy ! Component: 150 - total flux cleaned = -0.000850723 Jy ! Component: 200 - total flux cleaned = -0.000849531 Jy ! Component: 250 - total flux cleaned = -0.000878282 Jy ! Component: 300 - total flux cleaned = -0.00087811 Jy ! Component: 350 - total flux cleaned = -0.000903882 Jy ! Component: 400 - total flux cleaned = -0.000904359 Jy ! Total flux subtracted in 400 components = -0.000904359 Jy ! Clean residual min=-0.004875 max=0.004414 Jy/beam ! Clean residual mean=0.000012 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.917813 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 195 components and 0.917813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106670Jy sigma=0.616735 ! Fit after self-cal, rms=0.106682Jy sigma=0.616724 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.03744e-06 Jy ! Component: 100 - total flux cleaned = 2.15418e-05 Jy ! Component: 150 - total flux cleaned = 2.11936e-05 Jy ! Component: 200 - total flux cleaned = 4.45825e-05 Jy ! Component: 250 - total flux cleaned = 6.78318e-05 Jy ! Component: 300 - total flux cleaned = 6.75094e-05 Jy ! Component: 350 - total flux cleaned = 6.78338e-05 Jy ! Component: 400 - total flux cleaned = 6.78996e-05 Jy ! Total flux subtracted in 400 components = 6.78996e-05 Jy ! Clean residual min=-0.004875 max=0.004421 Jy/beam ! Clean residual mean=0.000012 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.917881 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 198 components and 0.917881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106650Jy sigma=0.616564 ! Fit after self-cal, rms=0.106654Jy sigma=0.616562 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106654Jy sigma=0.616562 ! Fit after self-cal, rms=0.104983Jy sigma=0.603649 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.481 mas, bmaj=3.453 mas, bpa=-5.251 degrees ! Estimated noise=1.98014 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748602 Jy ! Component: 100 - total flux cleaned = -0.000726532 Jy ! Component: 150 - total flux cleaned = -0.000706365 Jy ! Component: 200 - total flux cleaned = -0.000687586 Jy ! Component: 250 - total flux cleaned = -0.000653893 Jy ! Component: 300 - total flux cleaned = -0.000638566 Jy ! Component: 350 - total flux cleaned = -0.000609809 Jy ! Component: 400 - total flux cleaned = -0.000596287 Jy ! Total flux subtracted in 400 components = -0.000596287 Jy ! Clean residual min=-0.005907 max=0.004933 Jy/beam ! Clean residual mean=0.000021 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.917285 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 206 components and 0.917285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104965Jy sigma=0.603562 ! Fit after self-cal, rms=0.104985Jy sigma=0.603547 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.44928e-05 Jy ! Component: 100 - total flux cleaned = 5.72131e-05 Jy ! Component: 150 - total flux cleaned = 7.00646e-05 Jy ! Component: 200 - total flux cleaned = 8.29156e-05 Jy ! Component: 250 - total flux cleaned = 9.51627e-05 Jy ! Component: 300 - total flux cleaned = 0.000107443 Jy ! Component: 350 - total flux cleaned = 0.000119275 Jy ! Component: 400 - total flux cleaned = 0.000130784 Jy ! Total flux subtracted in 400 components = 0.000130784 Jy ! Clean residual min=-0.005913 max=0.004911 Jy/beam ! Clean residual mean=0.000021 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.917416 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 214 components and 0.917416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104988Jy sigma=0.603528 ! Fit after self-cal, rms=0.104991Jy sigma=0.603526 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.068 mas, bmaj=1.765 mas, bpa=-5.662 degrees ! Estimated noise=1.76355 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.068 x 1.765 at -5.662 degrees (North through East) ! Clean map min=-0.0047185 max=0.79557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104991Jy sigma=0.603526 ! Fit after self-cal, rms=0.122450Jy sigma=0.549850 ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.069 mas, bmaj=1.764 mas, bpa=-5.669 degrees ! Estimated noise=1.76279 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245877 Jy ! Component: 100 - total flux cleaned = -0.000246804 Jy ! Component: 150 - total flux cleaned = -0.000246696 Jy ! Component: 200 - total flux cleaned = -0.000278626 Jy ! Component: 250 - total flux cleaned = -0.000278034 Jy ! Component: 300 - total flux cleaned = -0.000305604 Jy ! Component: 350 - total flux cleaned = -0.00033179 Jy ! Component: 400 - total flux cleaned = -0.000356775 Jy ! Total flux subtracted in 400 components = -0.000356775 Jy ! Clean residual min=-0.004809 max=0.004182 Jy/beam ! Clean residual mean=0.000006 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.917059 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 229 components and 0.917059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122374Jy sigma=0.549549 ! Fit after self-cal, rms=0.122385Jy sigma=0.549536 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01203e-05 Jy ! Component: 100 - total flux cleaned = 3.03672e-05 Jy ! Component: 150 - total flux cleaned = 6.5328e-06 Jy ! Component: 200 - total flux cleaned = 6.7518e-06 Jy ! Component: 250 - total flux cleaned = 6.54205e-06 Jy ! Component: 300 - total flux cleaned = 6.93001e-06 Jy ! Component: 350 - total flux cleaned = 6.62849e-06 Jy ! Component: 400 - total flux cleaned = 6.67066e-06 Jy ! Total flux subtracted in 400 components = 6.67066e-06 Jy ! Clean residual min=-0.004794 max=0.004169 Jy/beam ! Clean residual mean=0.000006 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.917065 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 238 components and 0.917065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122349Jy sigma=0.549371 ! Fit after self-cal, rms=0.122370Jy sigma=0.549366 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122370Jy sigma=0.549366 ! Fit after self-cal, rms=0.122593Jy sigma=0.549317 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.8411 mas, bmaj=1.596 mas, bpa=-3.282 degrees ! Estimated noise=2.45658 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.619704 Jy ! Component: 100 - total flux cleaned = 0.75589 Jy ! Component: 150 - total flux cleaned = 0.795968 Jy ! Component: 200 - total flux cleaned = 0.818347 Jy ! Component: 250 - total flux cleaned = 0.834834 Jy ! Component: 300 - total flux cleaned = 0.847834 Jy ! Component: 350 - total flux cleaned = 0.858317 Jy ! Component: 400 - total flux cleaned = 0.866909 Jy ! Total flux subtracted in 400 components = 0.866909 Jy ! Clean residual min=-0.007492 max=0.006462 Jy/beam ! Clean residual mean=0.000003 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.866909 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.866909 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.07 mas, bmaj=1.764 mas, bpa=-5.692 degrees ! Estimated noise=1.76205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 4.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136212 Jy ! Component: 100 - total flux cleaned = 0.0230564 Jy ! Component: 150 - total flux cleaned = 0.0301205 Jy ! Component: 200 - total flux cleaned = 0.0355853 Jy ! Component: 250 - total flux cleaned = 0.0398826 Jy ! Component: 300 - total flux cleaned = 0.0433799 Jy ! Component: 350 - total flux cleaned = 0.0462733 Jy ! Component: 400 - total flux cleaned = 0.0486864 Jy ! Total flux subtracted in 400 components = 0.0486864 Jy ! Clean residual min=-0.004909 max=0.004335 Jy/beam ! Clean residual mean=0.000005 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.915595 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 117 components and 0.915596 Jy ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.481 mas, bmaj=3.451 mas, bpa=-5.224 degrees ! Estimated noise=1.97784 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029341 Jy ! Component: 100 - total flux cleaned = 0.00504357 Jy ! Component: 150 - total flux cleaned = 0.00663193 Jy ! Component: 200 - total flux cleaned = 0.00784207 Jy ! Component: 250 - total flux cleaned = 0.00831718 Jy ! Component: 300 - total flux cleaned = 0.00853313 Jy ! Component: 350 - total flux cleaned = 0.00873678 Jy ! Component: 400 - total flux cleaned = 0.00896018 Jy ! Total flux subtracted in 400 components = 0.00896018 Jy ! Clean residual min=-0.005330 max=0.004582 Jy/beam ! Clean residual mean=0.000008 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.924556 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149664 Jy ! Component: 100 - total flux cleaned = 0.000263205 Jy ! Component: 150 - total flux cleaned = 0.000371334 Jy ! Component: 200 - total flux cleaned = 0.000449131 Jy ! Component: 250 - total flux cleaned = 0.000524361 Jy ! Component: 300 - total flux cleaned = 0.000596872 Jy ! Component: 350 - total flux cleaned = 0.000666797 Jy ! Component: 400 - total flux cleaned = 0.000733766 Jy ! Total flux subtracted in 400 components = 0.000733766 Jy ! Clean residual min=-0.005249 max=0.004570 Jy/beam ! Clean residual mean=0.000008 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.925289 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 157 components and 0.925289 Jy ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=1.07 mas, bmaj=1.764 mas, bpa=-5.692 degrees ! Estimated noise=1.76205 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000451697 Jy ! Component: 100 - total flux cleaned = -0.000617414 Jy ! Component: 150 - total flux cleaned = -0.000668329 Jy ! Component: 200 - total flux cleaned = -0.000714832 Jy ! Component: 250 - total flux cleaned = -0.000713652 Jy ! Component: 300 - total flux cleaned = -0.00067383 Jy ! Component: 350 - total flux cleaned = -0.000712001 Jy ! Component: 400 - total flux cleaned = -0.000674909 Jy ! Total flux subtracted in 400 components = -0.000674909 Jy ! Clean residual min=-0.004417 max=0.004206 Jy/beam ! Clean residual mean=0.000004 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.924614 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 172 components and 0.924614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122294Jy sigma=0.547222 ! Fit after self-cal, rms=0.122242Jy sigma=0.546937 wmodel /scr/pima/rdv62_uvs/J0501-0159_X_map.mod ! Writing 172 model components to file: /scr/pima/rdv62_uvs/J0501-0159_X_map.mod wobs /scr/pima/rdv62_uvs/J0501-0159_X_uvs.fits ! Applying 2166 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J0501-0159_X_uvs.fits wwins /scr/pima/rdv62_uvs/J0501-0159_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv62_uvs/J0501-0159_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115624 Jy ! Component: 100 - total flux cleaned = -0.00144552 Jy ! Component: 150 - total flux cleaned = -0.00172312 Jy ! Component: 200 - total flux cleaned = -0.00212314 Jy ! Component: 250 - total flux cleaned = -0.00218783 Jy ! Component: 300 - total flux cleaned = -0.00225068 Jy ! Component: 350 - total flux cleaned = -0.00212703 Jy ! Component: 400 - total flux cleaned = -0.00224732 Jy ! Component: 450 - total flux cleaned = -0.00218776 Jy ! Component: 500 - total flux cleaned = -0.00189936 Jy ! Component: 550 - total flux cleaned = -0.00190076 Jy ! Component: 600 - total flux cleaned = -0.00190099 Jy ! Component: 650 - total flux cleaned = -0.00184617 Jy ! Component: 700 - total flux cleaned = -0.0018458 Jy ! Component: 750 - total flux cleaned = -0.00184507 Jy ! Component: 800 - total flux cleaned = -0.001793 Jy ! Component: 850 - total flux cleaned = -0.00189619 Jy ! Component: 900 - total flux cleaned = -0.00194723 Jy ! Component: 950 - total flux cleaned = -0.00184581 Jy ! Component: 1000 - total flux cleaned = -0.00189529 Jy ! Component: 1050 - total flux cleaned = -0.00184595 Jy ! Component: 1100 - total flux cleaned = -0.00189544 Jy ! Component: 1150 - total flux cleaned = -0.00189478 Jy ! Component: 1200 - total flux cleaned = -0.00160702 Jy ! Component: 1250 - total flux cleaned = -0.00179733 Jy ! Component: 1300 - total flux cleaned = -0.00146787 Jy ! Component: 1350 - total flux cleaned = -0.00146755 Jy ! Component: 1400 - total flux cleaned = -0.00123688 Jy ! Component: 1450 - total flux cleaned = -0.00119145 Jy ! Component: 1500 - total flux cleaned = -0.00119185 Jy ! Component: 1550 - total flux cleaned = -0.00119115 Jy ! Component: 1600 - total flux cleaned = -0.000923935 Jy ! Component: 1650 - total flux cleaned = -0.000879969 Jy ! Component: 1700 - total flux cleaned = -0.0011433 Jy ! Component: 1750 - total flux cleaned = -0.000881992 Jy ! Component: 1800 - total flux cleaned = -0.000925027 Jy ! Component: 1850 - total flux cleaned = -0.000882085 Jy ! Component: 1900 - total flux cleaned = -0.000882028 Jy ! Component: 1950 - total flux cleaned = -0.000839623 Jy ! Component: 2000 - total flux cleaned = -0.000755806 Jy ! Component: 2050 - total flux cleaned = -0.000838508 Jy ! Component: 2100 - total flux cleaned = -0.000755819 Jy ! Component: 2150 - total flux cleaned = -0.000633411 Jy ! Component: 2200 - total flux cleaned = -0.000674233 Jy ! Component: 2250 - total flux cleaned = -0.000473021 Jy ! Component: 2300 - total flux cleaned = -0.000632512 Jy ! Component: 2350 - total flux cleaned = -0.000473482 Jy ! Component: 2400 - total flux cleaned = -0.000512686 Jy ! Component: 2450 - total flux cleaned = -0.000630348 Jy ! Component: 2500 - total flux cleaned = -0.000591492 Jy ! Component: 2550 - total flux cleaned = -0.000436683 Jy ! Component: 2600 - total flux cleaned = -0.000590985 Jy ! Component: 2650 - total flux cleaned = -0.000437956 Jy ! Component: 2700 - total flux cleaned = -0.000514233 Jy ! Component: 2750 - total flux cleaned = -0.000400951 Jy ! Component: 2800 - total flux cleaned = -0.000438948 Jy ! Component: 2850 - total flux cleaned = -0.00055092 Jy ! Component: 2900 - total flux cleaned = -0.000439473 Jy ! Component: 2950 - total flux cleaned = -0.000476193 Jy ! Component: 3000 - total flux cleaned = -0.000329326 Jy ! Component: 3050 - total flux cleaned = -0.000401955 Jy ! Component: 3100 - total flux cleaned = -0.000220586 Jy ! Component: 3150 - total flux cleaned = -0.000292762 Jy ! Component: 3200 - total flux cleaned = -0.000149102 Jy ! Component: 3250 - total flux cleaned = -4.20562e-05 Jy ! Component: 3300 - total flux cleaned = -0.000113117 Jy ! Component: 3350 - total flux cleaned = -7.78982e-05 Jy ! Component: 3400 - total flux cleaned = 0.000202743 Jy ! Component: 3450 - total flux cleaned = 0.000272694 Jy ! Component: 3500 - total flux cleaned = 0.00041168 Jy ! Component: 3550 - total flux cleaned = 0.000515582 Jy ! Component: 3600 - total flux cleaned = 0.000584559 Jy ! Component: 3650 - total flux cleaned = 0.000652904 Jy ! Component: 3700 - total flux cleaned = 0.000720646 Jy ! Component: 3750 - total flux cleaned = 0.000754695 Jy ! Component: 3800 - total flux cleaned = 0.000990381 Jy ! Component: 3850 - total flux cleaned = 0.000923146 Jy ! Component: 3900 - total flux cleaned = 0.00108978 Jy ! Component: 3950 - total flux cleaned = 0.00108966 Jy ! Component: 4000 - total flux cleaned = 0.00115557 Jy ! Component: 4050 - total flux cleaned = 0.00115555 Jy ! Total flux subtracted in 4096 components = 0.00122094 Jy ! Clean residual min=-0.002178 max=0.001815 Jy/beam ! Clean residual mean=0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.925835 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 449 components and 0.925835 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J0501-0159_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.07 x 1.764 at -5.692 degrees (North through East) ! Clean map min=-0.0031989 max=0.79691 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J0501-0159_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 0.661% of the data. ! The y-axis pixel size should ideally be below 0.1946 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.7969 rms= 0.00057 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J0501-0159_X_uvs.log closed on Fri Nov 22 22:33:25 2013