! Started logfile: J2236+2828_X_2003_07_09_pus_uvs.log on Sun Apr 7 17:07:54 2013 obs J2236+2828_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J2236+2828_X_2003_07_09_pus_uva.fits ! AN table 1: 199 integrations on 171 of 171 possible baselines. ! AN table 2: 193 integrations on 171 of 171 possible baselines. ! AN table 3: 47 integrations on 171 of 171 possible baselines. ! AN table 4: 48 integrations on 171 of 171 possible baselines. ! AN table 5: 58 integrations on 171 of 171 possible baselines. ! AN table 6: 167 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0516049 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2236+2828 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 25132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2236+2828_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3425 telescope corrections were flagged in sub-array 1. ! A total of 2895 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! A total of 832 telescope corrections were flagged in sub-array 4. ! A total of 903 telescope corrections were flagged in sub-array 5. ! A total of 2578 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 3426 telescope corrections were flagged in sub-array 1. ! A total of 2897 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! A total of 831 telescope corrections were flagged in sub-array 4. ! A total of 904 telescope corrections were flagged in sub-array 5. ! A total of 2581 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 3429 telescope corrections were flagged in sub-array 1. ! A total of 2903 telescope corrections were flagged in sub-array 2. ! A total of 744 telescope corrections were flagged in sub-array 3. ! A total of 838 telescope corrections were flagged in sub-array 4. ! A total of 908 telescope corrections were flagged in sub-array 5. ! A total of 2585 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 3426 telescope corrections were flagged in sub-array 1. ! A total of 2898 telescope corrections were flagged in sub-array 2. ! A total of 732 telescope corrections were flagged in sub-array 3. ! A total of 838 telescope corrections were flagged in sub-array 4. ! A total of 913 telescope corrections were flagged in sub-array 5. ! A total of 2585 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.790029Jy sigma=0.005564 ! Fit after self-cal, rms=0.381614Jy sigma=0.002600 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.675 mas, bmaj=0.986 mas, bpa=10.41 degrees ! Estimated noise=1035.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.622038 Jy ! Component: 100 - total flux cleaned = 0.831671 Jy ! Total flux subtracted in 100 components = 0.831671 Jy ! Clean residual min=-0.024230 max=0.096954 Jy/beam ! Clean residual mean=0.000098 rms=0.007348 Jy/beam ! Combined flux in latest and established models = 0.831671 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.831671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325448Jy sigma=0.002302 ! Fit after self-cal, rms=0.322559Jy sigma=0.002296 ! Inverting map ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116455 Jy ! Component: 100 - total flux cleaned = 0.189947 Jy ! Total flux subtracted in 100 components = 0.189947 Jy ! Clean residual min=-0.016976 max=0.039297 Jy/beam ! Clean residual mean=0.000005 rms=0.004967 Jy/beam ! Combined flux in latest and established models = 1.02162 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 1.02162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264094Jy sigma=0.001689 ! Fit after self-cal, rms=0.262856Jy sigma=0.001686 ! Inverting map ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049849 Jy ! Component: 100 - total flux cleaned = 0.0829402 Jy ! Total flux subtracted in 100 components = 0.0829402 Jy ! Clean residual min=-0.016501 max=0.024598 Jy/beam ! Clean residual mean=-0.000035 rms=0.004329 Jy/beam ! Combined flux in latest and established models = 1.10456 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 1.10456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251909Jy sigma=0.001552 ! Fit after self-cal, rms=0.251506Jy sigma=0.001551 ! Inverting map ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.8095 mas, bmaj=1.148 mas, bpa=7.391 degrees ! Estimated noise=660.983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315163 Jy ! Component: 100 - total flux cleaned = 0.0462743 Jy ! Component: 150 - total flux cleaned = 0.0522687 Jy ! Component: 200 - total flux cleaned = 0.0537057 Jy ! Total flux subtracted in 200 components = 0.0537057 Jy ! Clean residual min=-0.015689 max=0.019762 Jy/beam ! Clean residual mean=0.000234 rms=0.004108 Jy/beam ! Combined flux in latest and established models = 1.15826 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 1.15826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248790Jy sigma=0.001513 ! Fit after self-cal, rms=0.248695Jy sigma=0.001513 ! Inverting map ! Your choice of large map pixels excluded 0.595% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 GC 1.02 GG 1.00* ! HN 0.92 KP 1.00 LA 0.95 MA 0.97 ! MK 1.00* NL 0.98 NY 1.05 ON 1.04 ! OV 0.96 PT 0.98 SC 0.92 TC 1.00* ! TS 1.21 WF 1.11 WZ 1.02 ! ! A total of 111 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.95 GC 1.06 GG 1.00* ! HN 0.89 KP 0.94 LA 0.95 MA 0.99 ! MK 1.00* NL 0.93 NY 1.04 ON 1.11 ! OV 0.91 PT 0.93 SC 1.53 TC 1.00* ! TS 1.12 WF 1.06 WZ 1.07 ! ! A total of 72 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 GC 1.02 GG 1.00* ! HN 0.97 KP 1.00* LA 1.04 MA 1.15 ! MK 1.00* NL 0.99 NY 1.00* ON 0.86 ! OV 1.00* PT 1.01 SC 0.98 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 0.90 ! MK 1.00* NL 1.00* NY 1.00 ON 0.90 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.15 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.00* GC 1.07 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.05 ! MK 1.00* NL 1.00* NY 1.03 ON 0.97 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.06 GC 1.00 GG 1.00* ! HN 1.00* KP 0.98 LA 1.03 MA 0.93 ! MK 0.92 NL 1.18 NY 0.98 ON 1.02 ! OV 1.01 PT 1.02 SC 1.00* TC 1.00* ! TS 0.92 WF 1.00* WZ 1.05 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 GC 1.06 GG 1.00* ! HN 0.95 KP 0.99 LA 0.95 MA 0.93 ! MK 1.00* NL 0.98 NY 1.05 ON 1.02 ! OV 0.97 PT 1.01 SC 0.93 TC 1.00* ! TS 1.17 WF 1.17 WZ 1.10 ! ! A total of 102 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.93 GC 1.11 GG 1.00* ! HN 0.89 KP 0.93 LA 0.95 MA 0.91 ! MK 1.00* NL 0.94 NY 1.05 ON 1.16 ! OV 0.91 PT 0.98 SC 1.55 TC 1.00* ! TS 1.13 WF 1.09 WZ 1.09 ! ! A total of 72 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.72 FD 1.02 GC 1.49 GG 1.00* ! HN 0.97 KP 1.00* LA 1.05 MA 0.96 ! MK 1.00* NL 0.99 NY 1.00* ON 1.00 ! OV 1.00* PT 1.08 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 45 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 0.90 ! MK 1.00* NL 1.00* NY 1.17 ON 0.93 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.18 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.00* GC 1.13 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.08 ! MK 1.00* NL 1.00* NY 1.05 ON 0.96 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.05 ! ! A total of 15 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.06 GC 1.05 GG 1.00* ! HN 1.00* KP 0.96 LA 1.02 MA 0.98 ! MK 0.96 NL 1.18 NY 1.02 ON 0.95 ! OV 0.99 PT 1.07 SC 1.00* TC 1.00* ! TS 0.95 WF 1.00* WZ 1.13 ! ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 GC 1.00 GG 1.00* ! HN 0.95 KP 1.01 LA 0.97 MA 0.90 ! MK 1.00* NL 1.04 NY 1.11 ON 1.02 ! OV 0.99 PT 0.98 SC 0.93 TC 1.00* ! TS 1.29 WF 1.11 WZ 1.07 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.93 GC 1.04 GG 1.00* ! HN 0.91 KP 0.93 LA 0.95 MA 0.77 ! MK 1.00* NL 0.99 NY 1.12 ON 1.09 ! OV 0.96 PT 0.95 SC 1.34 TC 1.00* ! TS 1.17 WF 1.07 WZ 1.11 ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.01 GC 0.80 GG 1.00* ! HN 0.98 KP 1.00* LA 1.03 MA 1.02 ! MK 1.00* NL 1.04 NY 1.00* ON 0.87 ! OV 1.00* PT 1.06 SC 0.99 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 0.84 ! MK 1.00* NL 1.00* NY 1.11 ON 0.99 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.18 ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.00* GC 1.07 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.01 ! MK 1.00* NL 1.00* NY 1.06 ON 0.95 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.05 ! ! A total of 15 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 FD 1.06 GC 1.05 GG 1.00* ! HN 1.00* KP 0.95 LA 1.05 MA 0.96 ! MK 0.97 NL 1.20 NY 1.08 ON 1.05 ! OV 1.04 PT 1.07 SC 1.00* TC 1.00* ! TS 0.95 WF 1.00* WZ 1.05 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 GC 0.99 GG 1.00* ! HN 0.97 KP 1.00 LA 0.95 MA 0.85 ! MK 1.00* NL 1.00 NY 1.04 ON 1.13 ! OV 1.00 PT 1.01 SC 1.00 TC 1.00* ! TS 1.24 WF 1.11 WZ 1.08 ! ! A total of 99 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.93 GC 1.02 GG 1.00* ! HN 0.93 KP 0.93 LA 0.95 MA 0.79 ! MK 1.00* NL 0.95 NY 1.11 ON 1.10 ! OV 0.94 PT 0.95 SC 1.50 TC 1.00* ! TS 1.16 WF 1.09 WZ 1.07 ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.76 FD 1.01 GC 1.09 GG 1.00* ! HN 0.98 KP 1.00* LA 1.03 MA 0.86 ! MK 1.00* NL 1.02 NY 1.00* ON 0.59 ! OV 1.00* PT 1.06 SC 1.04 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 54 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.15 ! MK 1.00* NL 1.00* NY 0.90 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.13 ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.00* GC 1.05 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.05 ! MK 1.00* NL 1.00* NY 1.07 ON 0.97 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.08 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 1.04 GC 1.03 GG 1.00* ! HN 1.00* KP 0.98 LA 1.05 MA 1.02 ! MK 1.01 NL 1.18 NY 1.07 ON 1.01 ! OV 1.03 PT 1.08 SC 1.00* TC 1.00* ! TS 0.96 WF 1.00* WZ 1.01 ! ! ! Fit before self-cal, rms=0.248695Jy sigma=0.001513 ! Fit after self-cal, rms=0.233322Jy sigma=0.001319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8421 mas, bmaj=1.159 mas, bpa=9.145 degrees ! Estimated noise=671.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160658 Jy ! Component: 100 - total flux cleaned = 0.00142069 Jy ! Component: 150 - total flux cleaned = 0.00126404 Jy ! Component: 200 - total flux cleaned = 0.00100679 Jy ! Total flux subtracted in 200 components = 0.00100679 Jy ! Clean residual min=-0.008504 max=0.009848 Jy/beam ! Clean residual mean=0.000201 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 1.15927 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 1.15927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232971Jy sigma=0.001317 ! Fit after self-cal, rms=0.232947Jy sigma=0.001316 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232947Jy sigma=0.001316 ! Fit after self-cal, rms=0.226768Jy sigma=0.001271 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.842 mas, bmaj=1.158 mas, bpa=8.649 degrees ! Estimated noise=673.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448733 Jy ! Component: 100 - total flux cleaned = 0.00450546 Jy ! Component: 150 - total flux cleaned = 0.00436051 Jy ! Component: 200 - total flux cleaned = 0.00436148 Jy ! Total flux subtracted in 200 components = 0.00436148 Jy ! Clean residual min=-0.007860 max=0.007667 Jy/beam ! Clean residual mean=0.000126 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 1.16363 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 1.16363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226416Jy sigma=0.001269 ! Fit after self-cal, rms=0.226342Jy sigma=0.001269 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11211e-05 Jy ! Component: 100 - total flux cleaned = -0.00022961 Jy ! Component: 150 - total flux cleaned = -0.000400246 Jy ! Component: 200 - total flux cleaned = -0.000544949 Jy ! Total flux subtracted in 200 components = -0.000544949 Jy ! Clean residual min=-0.007784 max=0.007746 Jy/beam ! Clean residual mean=0.000127 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 1.16309 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 1.16309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226236Jy sigma=0.001268 ! Fit after self-cal, rms=0.226218Jy sigma=0.001268 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226218Jy sigma=0.001268 ! Fit after self-cal, rms=0.220533Jy sigma=0.001183 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8453 mas, bmaj=1.158 mas, bpa=8.26 degrees ! Estimated noise=673.783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216994 Jy ! Component: 100 - total flux cleaned = -0.00259566 Jy ! Component: 150 - total flux cleaned = -0.00269852 Jy ! Component: 200 - total flux cleaned = -0.00278041 Jy ! Total flux subtracted in 200 components = -0.00278041 Jy ! Clean residual min=-0.003858 max=0.004497 Jy/beam ! Clean residual mean=0.000088 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 1.16031 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 1.16031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220331Jy sigma=0.001182 ! Fit after self-cal, rms=0.220325Jy sigma=0.001182 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323273 Jy ! Component: 100 - total flux cleaned = 0.00357323 Jy ! Component: 150 - total flux cleaned = 0.0037598 Jy ! Component: 200 - total flux cleaned = 0.00383968 Jy ! Total flux subtracted in 200 components = 0.00383968 Jy ! Clean residual min=-0.003884 max=0.004051 Jy/beam ! Clean residual mean=0.000065 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 1.16415 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 1.16415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220196Jy sigma=0.001181 ! Fit after self-cal, rms=0.220189Jy sigma=0.001181 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Added new window around map position (-17, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183098 Jy ! Component: 100 - total flux cleaned = 0.00192516 Jy ! Component: 150 - total flux cleaned = 0.00226479 Jy ! Component: 200 - total flux cleaned = 0.0025684 Jy ! Total flux subtracted in 200 components = 0.0025684 Jy ! Clean residual min=-0.003938 max=0.003283 Jy/beam ! Clean residual mean=0.000050 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 1.16672 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 1.16672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220079Jy sigma=0.001180 ! Fit after self-cal, rms=0.220079Jy sigma=0.001180 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220079Jy sigma=0.001180 ! Fit after self-cal, rms=0.220207Jy sigma=0.001179 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=2.525 mas, bmaj=2.552 mas, bpa=-18.5 degrees ! Estimated noise=892.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.38633e-05 Jy ! Component: 100 - total flux cleaned = -0.000241827 Jy ! Component: 150 - total flux cleaned = -0.000243792 Jy ! Component: 200 - total flux cleaned = -0.000198397 Jy ! Total flux subtracted in 200 components = -0.000198397 Jy ! Clean residual min=-0.004005 max=0.003080 Jy/beam ! Clean residual mean=0.000043 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 1.16652 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 1.16652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220154Jy sigma=0.001179 ! Fit after self-cal, rms=0.220145Jy sigma=0.001179 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222153 Jy ! Component: 100 - total flux cleaned = 0.000274725 Jy ! Component: 150 - total flux cleaned = 0.000237911 Jy ! Component: 200 - total flux cleaned = 0.000168914 Jy ! Total flux subtracted in 200 components = 0.000168914 Jy ! Clean residual min=-0.004019 max=0.003010 Jy/beam ! Clean residual mean=0.000040 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 1.16669 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 1.16669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220117Jy sigma=0.001179 ! Fit after self-cal, rms=0.220116Jy sigma=0.001179 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8483 mas, bmaj=1.158 mas, bpa=8.005 degrees ! Estimated noise=673.785 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8483 x 1.158 at 8.005 degrees (North through East) ! Clean map min=-0.003374 max=0.86576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220116Jy sigma=0.001179 ! Fit after self-cal, rms=0.196876Jy sigma=0.001040 ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8482 mas, bmaj=1.157 mas, bpa=8 degrees ! Estimated noise=672.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153002 Jy ! Component: 100 - total flux cleaned = -0.00160802 Jy ! Component: 150 - total flux cleaned = -0.00132725 Jy ! Component: 200 - total flux cleaned = -0.0011378 Jy ! Total flux subtracted in 200 components = -0.0011378 Jy ! Clean residual min=-0.003600 max=0.002834 Jy/beam ! Clean residual mean=0.000041 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.16555 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 1.16555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196779Jy sigma=0.001039 ! Fit after self-cal, rms=0.196778Jy sigma=0.001039 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018015 Jy ! Component: 100 - total flux cleaned = 0.000417454 Jy ! Component: 150 - total flux cleaned = 0.000526936 Jy ! Component: 200 - total flux cleaned = 0.000625454 Jy ! Total flux subtracted in 200 components = 0.000625454 Jy ! Clean residual min=-0.003601 max=0.002835 Jy/beam ! Clean residual mean=0.000037 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 1.16617 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 1.16617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196735Jy sigma=0.001039 ! Fit after self-cal, rms=0.196734Jy sigma=0.001039 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196734Jy sigma=0.001039 ! Fit after self-cal, rms=0.196860Jy sigma=0.001039 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.6994 mas, bmaj=0.9824 mas, bpa=10.53 degrees ! Estimated noise=1088.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.641607 Jy ! Component: 100 - total flux cleaned = 0.856804 Jy ! Component: 150 - total flux cleaned = 0.966697 Jy ! Component: 200 - total flux cleaned = 1.0332 Jy ! Total flux subtracted in 200 components = 1.0332 Jy ! Clean residual min=-0.008912 max=0.034948 Jy/beam ! Clean residual mean=0.000067 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 1.0332 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.0332 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8498 mas, bmaj=1.157 mas, bpa=7.89 degrees ! Estimated noise=672.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058158 Jy ! Component: 100 - total flux cleaned = 0.0886056 Jy ! Component: 150 - total flux cleaned = 0.105414 Jy ! Component: 200 - total flux cleaned = 0.115451 Jy ! Total flux subtracted in 200 components = 0.115451 Jy ! Clean residual min=-0.003777 max=0.005244 Jy/beam ! Clean residual mean=0.000134 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 1.14865 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 42 components and 1.14865 Jy ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654559 Jy ! Component: 100 - total flux cleaned = 0.0106395 Jy ! Component: 150 - total flux cleaned = 0.0119198 Jy ! Component: 200 - total flux cleaned = 0.0127842 Jy ! Total flux subtracted in 200 components = 0.0127842 Jy ! Clean residual min=-0.003520 max=0.003291 Jy/beam ! Clean residual mean=0.000059 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 1.16144 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 1.16144 Jy ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=2.525 mas, bmaj=2.551 mas, bpa=-19.3 degrees ! Estimated noise=889.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278976 Jy ! Component: 100 - total flux cleaned = 0.00312359 Jy ! Component: 150 - total flux cleaned = 0.00327944 Jy ! Component: 200 - total flux cleaned = 0.00336396 Jy ! Total flux subtracted in 200 components = 0.00336396 Jy ! Clean residual min=-0.003953 max=0.002816 Jy/beam ! Clean residual mean=0.000102 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 1.1648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.64371e-05 Jy ! Component: 100 - total flux cleaned = 0.000101563 Jy ! Component: 150 - total flux cleaned = 0.000182934 Jy ! Component: 200 - total flux cleaned = 0.000205327 Jy ! Total flux subtracted in 200 components = 0.000205327 Jy ! Clean residual min=-0.003913 max=0.002792 Jy/beam ! Clean residual mean=0.000098 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 1.165 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 1.165 Jy ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! Estimated beam: bmin=0.8498 mas, bmaj=1.157 mas, bpa=7.89 degrees ! Estimated noise=672.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116529 Jy ! Component: 100 - total flux cleaned = 0.000405523 Jy ! Component: 150 - total flux cleaned = 0.000685513 Jy ! Component: 200 - total flux cleaned = 0.000684794 Jy ! Total flux subtracted in 200 components = 0.000684794 Jy ! Clean residual min=-0.003593 max=0.003095 Jy/beam ! Clean residual mean=0.000034 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 1.16569 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 1.16569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197089Jy sigma=0.001041 ! Fit after self-cal, rms=0.197100Jy sigma=0.001041 wmodel J2236+2828_X_2003_07_09_pus_map.mod ! Writing 80 model components to file: J2236+2828_X_2003_07_09_pus_map.mod wobs J2236+2828_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J2236+2828_X_2003_07_09_pus_uvs.fits wwins J2236+2828_X_2003_07_09_pus_map.win ! wwins: Wrote 3 windows to J2236+2828_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000852048 Jy ! Component: 100 - total flux cleaned = -0.000681503 Jy ! Component: 150 - total flux cleaned = -0.00068168 Jy ! Component: 200 - total flux cleaned = -0.00068059 Jy ! Component: 250 - total flux cleaned = -0.00052584 Jy ! Component: 300 - total flux cleaned = -0.000425382 Jy ! Component: 350 - total flux cleaned = -0.000325952 Jy ! Component: 400 - total flux cleaned = -0.000276367 Jy ! Component: 450 - total flux cleaned = -8.44101e-05 Jy ! Component: 500 - total flux cleaned = 9.71945e-06 Jy ! Component: 550 - total flux cleaned = 0.00010231 Jy ! Component: 600 - total flux cleaned = 0.000148364 Jy ! Component: 650 - total flux cleaned = 0.00023871 Jy ! Component: 700 - total flux cleaned = 0.000327353 Jy ! Component: 750 - total flux cleaned = 0.000238347 Jy ! Component: 800 - total flux cleaned = 0.000239094 Jy ! Component: 850 - total flux cleaned = 0.000326925 Jy ! Component: 900 - total flux cleaned = 0.000413566 Jy ! Component: 950 - total flux cleaned = 0.000456331 Jy ! Component: 1000 - total flux cleaned = 0.000413981 Jy ! Component: 1050 - total flux cleaned = 0.000498255 Jy ! Component: 1100 - total flux cleaned = 0.000498325 Jy ! Component: 1150 - total flux cleaned = 0.000581322 Jy ! Component: 1200 - total flux cleaned = 0.000540667 Jy ! Component: 1250 - total flux cleaned = 0.000704118 Jy ! Component: 1300 - total flux cleaned = 0.000663216 Jy ! Component: 1350 - total flux cleaned = 0.000662846 Jy ! Component: 1400 - total flux cleaned = 0.000622841 Jy ! Component: 1450 - total flux cleaned = 0.000583016 Jy ! Component: 1500 - total flux cleaned = 0.000622685 Jy ! Component: 1550 - total flux cleaned = 0.000701209 Jy ! Component: 1600 - total flux cleaned = 0.000701212 Jy ! Component: 1650 - total flux cleaned = 0.000701224 Jy ! Component: 1700 - total flux cleaned = 0.000701391 Jy ! Component: 1750 - total flux cleaned = 0.000778093 Jy ! Component: 1800 - total flux cleaned = 0.000854149 Jy ! Component: 1850 - total flux cleaned = 0.000892117 Jy ! Component: 1900 - total flux cleaned = 0.000967054 Jy ! Component: 1950 - total flux cleaned = 0.000967004 Jy ! Component: 2000 - total flux cleaned = 0.0010786 Jy ! Total flux subtracted in 2048 components = 0.00104131 Jy ! Clean residual min=-0.001850 max=0.002325 Jy/beam ! Clean residual mean=0.000024 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 1.16673 Jy keep ! Adding 170 model components to the UV plane model. ! The established model now contains 250 components and 1.16673 Jy ![Exited script file: muppet] wmap "J2236+2828_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8498 x 1.157 at 7.89 degrees (North through East) ! Clean map min=-0.0031588 max=0.86516 Jy/beam ! Writing clean map to FITS file: J2236+2828_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.86516 invert ! Inverting map ! Your choice of large map pixels excluded 0.516% of the data. ! The x-axis pixel size should ideally be below 0.1896 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000657793 device "J2236+2828_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2236+2828_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.228094 0.228094 0.456188 0.912377 1.82475 3.64951 7.29901 14.598 29.1961 58.3921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.865 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8498 x 1.157 at 7.89 degrees (North through East) ! Clean map min=-0.0031588 max=0.86516 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J2236+2828_X_2003_07_09_pus_uvs.log closed on Sun Apr 7 17:08:09 2013