! Started logfile: J2025+3343_X_2003_07_09_pus_uvs.log on Sun Apr 7 16:52:01 2013 obs J2025+3343_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J2025+3343_X_2003_07_09_pus_uva.fits ! AN table 1: 137 integrations on 171 of 171 possible baselines. ! AN table 2: 255 integrations on 171 of 171 possible baselines. ! AN table 3: 280 integrations on 171 of 171 possible baselines. ! AN table 4: 69 integrations on 171 of 171 possible baselines. ! AN table 5: 20 integrations on 171 of 171 possible baselines. ! AN table 6: 144 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.100927 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2025+3343 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 62476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2025+3343_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2492 telescope corrections were flagged in sub-array 1. ! A total of 2687 telescope corrections were flagged in sub-array 2. ! A total of 3825 telescope corrections were flagged in sub-array 3. ! A total of 1149 telescope corrections were flagged in sub-array 4. ! A total of 380 telescope corrections were flagged in sub-array 5. ! A total of 2612 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 2492 telescope corrections were flagged in sub-array 1. ! A total of 2686 telescope corrections were flagged in sub-array 2. ! A total of 3826 telescope corrections were flagged in sub-array 3. ! A total of 1149 telescope corrections were flagged in sub-array 4. ! A total of 380 telescope corrections were flagged in sub-array 5. ! A total of 2612 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 2492 telescope corrections were flagged in sub-array 1. ! A total of 2692 telescope corrections were flagged in sub-array 2. ! A total of 3818 telescope corrections were flagged in sub-array 3. ! A total of 1149 telescope corrections were flagged in sub-array 4. ! A total of 380 telescope corrections were flagged in sub-array 5. ! A total of 2612 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 2492 telescope corrections were flagged in sub-array 1. ! A total of 2708 telescope corrections were flagged in sub-array 2. ! A total of 3848 telescope corrections were flagged in sub-array 3. ! A total of 1149 telescope corrections were flagged in sub-array 4. ! A total of 380 telescope corrections were flagged in sub-array 5. ! A total of 2612 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.070053Jy sigma=0.008284 ! Fit after self-cal, rms=0.771274Jy sigma=0.005458 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.529 mas, bmaj=1.064 mas, bpa=-5.756 degrees ! Estimated noise=841.685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.365643 Jy ! Component: 100 - total flux cleaned = 0.593675 Jy ! Total flux subtracted in 100 components = 0.593675 Jy ! Clean residual min=-0.033018 max=0.132997 Jy/beam ! Clean residual mean=-0.000140 rms=0.013181 Jy/beam ! Combined flux in latest and established models = 0.593674 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.593674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.543374Jy sigma=0.004644 ! Fit after self-cal, rms=0.541326Jy sigma=0.004640 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-0.2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166353 Jy ! Component: 100 - total flux cleaned = 0.291279 Jy ! Total flux subtracted in 100 components = 0.291279 Jy ! Clean residual min=-0.023736 max=0.108241 Jy/beam ! Clean residual mean=-0.000072 rms=0.009686 Jy/beam ! Combined flux in latest and established models = 0.884954 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.884954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433229Jy sigma=0.003507 ! Fit after self-cal, rms=0.431765Jy sigma=0.003500 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (0.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113782 Jy ! Component: 100 - total flux cleaned = 0.202745 Jy ! Total flux subtracted in 100 components = 0.202745 Jy ! Clean residual min=-0.019427 max=0.072203 Jy/beam ! Clean residual mean=-0.000039 rms=0.007370 Jy/beam ! Combined flux in latest and established models = 1.0877 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 66 components and 1.0877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368704Jy sigma=0.002807 ! Fit after self-cal, rms=0.367933Jy sigma=0.002805 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799324 Jy ! Component: 100 - total flux cleaned = 0.144983 Jy ! Total flux subtracted in 100 components = 0.144983 Jy ! Clean residual min=-0.014544 max=0.052709 Jy/beam ! Clean residual mean=-0.000007 rms=0.005868 Jy/beam ! Combined flux in latest and established models = 1.23268 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 85 components and 1.23268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329207Jy sigma=0.002358 ! Fit after self-cal, rms=0.328819Jy sigma=0.002355 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-1, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591467 Jy ! Component: 100 - total flux cleaned = 0.10787 Jy ! Total flux subtracted in 100 components = 0.10787 Jy ! Clean residual min=-0.012225 max=0.040685 Jy/beam ! Clean residual mean=0.000017 rms=0.004848 Jy/beam ! Combined flux in latest and established models = 1.34055 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 1.34055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304814Jy sigma=0.002064 ! Fit after self-cal, rms=0.304663Jy sigma=0.002063 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-0.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457385 Jy ! Component: 100 - total flux cleaned = 0.0834648 Jy ! Total flux subtracted in 100 components = 0.0834648 Jy ! Clean residual min=-0.010986 max=0.031142 Jy/beam ! Clean residual mean=0.000033 rms=0.004116 Jy/beam ! Combined flux in latest and established models = 1.42402 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 1.42402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289341Jy sigma=0.001866 ! Fit after self-cal, rms=0.289085Jy sigma=0.001865 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367535 Jy ! Component: 100 - total flux cleaned = 0.0664165 Jy ! Total flux subtracted in 100 components = 0.0664165 Jy ! Clean residual min=-0.010878 max=0.024949 Jy/beam ! Clean residual mean=0.000045 rms=0.003571 Jy/beam ! Combined flux in latest and established models = 1.49043 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 1.49043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278815Jy sigma=0.001729 ! Fit after self-cal, rms=0.278590Jy sigma=0.001727 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-1, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280663 Jy ! Component: 100 - total flux cleaned = 0.051571 Jy ! Total flux subtracted in 100 components = 0.051571 Jy ! Clean residual min=-0.010977 max=0.019902 Jy/beam ! Clean residual mean=0.000054 rms=0.003197 Jy/beam ! Combined flux in latest and established models = 1.542 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 134 components and 1.542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271885Jy sigma=0.001638 ! Fit after self-cal, rms=0.271883Jy sigma=0.001637 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6335 mas, bmaj=1.314 mas, bpa=-4.028 degrees ! Estimated noise=416.166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537175 Jy ! Component: 100 - total flux cleaned = 0.0941482 Jy ! Component: 150 - total flux cleaned = 0.125537 Jy ! Component: 200 - total flux cleaned = 0.150301 Jy ! Total flux subtracted in 200 components = 0.150301 Jy ! Clean residual min=-0.012858 max=0.028269 Jy/beam ! Clean residual mean=0.000769 rms=0.005979 Jy/beam ! Combined flux in latest and established models = 1.69231 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 163 components and 1.69231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259458Jy sigma=0.001472 ! Fit after self-cal, rms=0.259369Jy sigma=0.001471 ! Inverting map ! Your choice of large map pixels excluded 0.563% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 156 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 GC 1.20 GG 1.00* ! HN 1.06 KP 0.92 LA 0.96 MA 0.90 ! MK 1.13 NL 0.99 NY 1.11 ON 1.00 ! OV 1.05 PT 0.95 SC 1.38 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.20 ! ! A total of 168 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.04 GC 1.13 GG 1.00* ! HN 1.06 KP 1.04 LA 1.06 MA 0.91 ! MK 1.15 NL 1.16 NY 1.06 ON 1.04 ! OV 1.00 PT 1.02 SC 1.38 TC 1.00* ! TS 1.17 WF 0.96 WZ 1.19 ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.97 GC 1.01 GG 1.00* ! HN 1.00* KP 0.97 LA 1.00* MA 1.00* ! MK 1.00* NL 1.06 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 84 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.08 GC 1.00* GG 1.00* ! HN 0.85 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.12 SC 1.00* TC 1.00* ! TS 1.00* WF 0.85 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 153 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 GC 1.32 GG 1.00* ! HN 1.05 KP 0.88 LA 0.96 MA 0.94 ! MK 1.12 NL 0.96 NY 1.09 ON 0.95 ! OV 1.04 PT 0.99 SC 1.28 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.21 ! ! A total of 147 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 GC 1.16 GG 1.00* ! HN 1.08 KP 1.05 LA 1.06 MA 0.96 ! MK 1.03 NL 1.13 NY 1.05 ON 1.03 ! OV 0.99 PT 1.06 SC 1.18 TC 1.00* ! TS 1.07 WF 0.97 WZ 1.20 ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.99 GC 1.05 GG 1.00* ! HN 1.00* KP 0.94 LA 1.00* MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 84 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.07 GC 1.00* GG 1.00* ! HN 0.89 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.18 SC 1.00* TC 1.00* ! TS 1.00* WF 0.87 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 153 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 GC 1.41 GG 1.00* ! HN 0.99 KP 0.83 LA 0.96 MA 0.97 ! MK 1.01 NL 0.92 NY 0.93 ON 1.14 ! OV 1.04 PT 1.02 SC 1.15 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.22 ! ! A total of 153 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.02 GC 0.99 GG 1.00* ! HN 1.08 KP 1.04 LA 1.06 MA 0.74 ! MK 0.85 NL 1.10 NY 1.01 ON 0.83 ! OV 1.02 PT 1.03 SC 1.04 TC 1.00* ! TS 1.22 WF 0.91 WZ 1.33 ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.98 GC 0.91 GG 1.00* ! HN 1.00* KP 0.93 LA 1.00* MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 84 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.06 GC 1.00* GG 1.00* ! HN 0.89 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.11 SC 1.00* TC 1.00* ! TS 1.00* WF 0.85 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 156 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.95 GC 1.58 GG 1.00* ! HN 1.00 KP 0.87 LA 0.94 MA 0.96 ! MK 0.97 NL 0.92 NY 0.88 ON 1.34 ! OV 1.01 PT 1.02 SC 1.12 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.18 ! ! A total of 192 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 GC 0.93 GG 1.00* ! HN 1.10 KP 1.03 LA 1.04 MA 1.17 ! MK 0.80 NL 1.04 NY 0.98 ON 0.88 ! OV 1.01 PT 1.03 SC 0.96 TC 1.00* ! TS 1.09 WF 0.93 WZ 1.24 ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.93 GC 0.85 GG 1.00* ! HN 1.00* KP 0.94 LA 1.00* MA 1.00* ! MK 1.00* NL 0.94 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 84 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.02 GC 1.00* GG 1.00* ! HN 0.85 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.10 SC 1.00* TC 1.00* ! TS 1.00* WF 0.87 WZ 1.00* ! ! ! Fit before self-cal, rms=0.259369Jy sigma=0.001471 ! Fit after self-cal, rms=0.235247Jy sigma=0.001276 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6403 mas, bmaj=1.359 mas, bpa=-3.934 degrees ! Estimated noise=433.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141272 Jy ! Component: 100 - total flux cleaned = 0.0212041 Jy ! Component: 150 - total flux cleaned = 0.0232931 Jy ! Component: 200 - total flux cleaned = 0.0243104 Jy ! Total flux subtracted in 200 components = 0.0243104 Jy ! Clean residual min=-0.010074 max=0.010087 Jy/beam ! Clean residual mean=0.000139 rms=0.002188 Jy/beam ! Combined flux in latest and established models = 1.71662 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 178 components and 1.71662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234257Jy sigma=0.001267 ! Fit after self-cal, rms=0.233882Jy sigma=0.001265 ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233882Jy sigma=0.001265 ! Fit after self-cal, rms=0.231134Jy sigma=0.001230 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6429 mas, bmaj=1.354 mas, bpa=-3.648 degrees ! Estimated noise=433.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545442 Jy ! Component: 100 - total flux cleaned = 0.00563854 Jy ! Component: 150 - total flux cleaned = 0.00537665 Jy ! Component: 200 - total flux cleaned = 0.00503267 Jy ! Total flux subtracted in 200 components = 0.00503267 Jy ! Clean residual min=-0.004862 max=0.006949 Jy/beam ! Clean residual mean=-0.000001 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 1.72165 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 184 components and 1.72165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230870Jy sigma=0.001228 ! Fit after self-cal, rms=0.230902Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00617931 Jy ! Component: 100 - total flux cleaned = 0.00838938 Jy ! Component: 150 - total flux cleaned = 0.00971085 Jy ! Component: 200 - total flux cleaned = 0.0103393 Jy ! Total flux subtracted in 200 components = 0.0103393 Jy ! Clean residual min=-0.004762 max=0.004491 Jy/beam ! Clean residual mean=-0.000031 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 1.73199 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 200 components and 1.73199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230677Jy sigma=0.001226 ! Fit after self-cal, rms=0.230636Jy sigma=0.001226 ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230636Jy sigma=0.001226 ! Fit after self-cal, rms=0.232857Jy sigma=0.001226 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6455 mas, bmaj=1.356 mas, bpa=-3.581 degrees ! Estimated noise=436.531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339727 Jy ! Component: 100 - total flux cleaned = 0.00451254 Jy ! Component: 150 - total flux cleaned = 0.00490821 Jy ! Component: 200 - total flux cleaned = 0.00518802 Jy ! Total flux subtracted in 200 components = 0.00518802 Jy ! Clean residual min=-0.004475 max=0.004487 Jy/beam ! Clean residual mean=-0.000012 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 1.73718 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 204 components and 1.73718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232730Jy sigma=0.001225 ! Fit after self-cal, rms=0.232715Jy sigma=0.001225 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.8, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146641 Jy ! Component: 100 - total flux cleaned = 0.00165294 Jy ! Component: 150 - total flux cleaned = 0.00202186 Jy ! Component: 200 - total flux cleaned = 0.00243809 Jy ! Total flux subtracted in 200 components = 0.00243809 Jy ! Clean residual min=-0.004460 max=0.004366 Jy/beam ! Clean residual mean=-0.000020 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 1.73961 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 209 components and 1.73961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232596Jy sigma=0.001224 ! Fit after self-cal, rms=0.232582Jy sigma=0.001224 ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232582Jy sigma=0.001224 ! Fit after self-cal, rms=0.233179Jy sigma=0.001224 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=2.687 mas, bmaj=2.859 mas, bpa=82.41 degrees ! Estimated noise=544.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367893 Jy ! Component: 100 - total flux cleaned = 0.00545269 Jy ! Component: 150 - total flux cleaned = 0.00584694 Jy ! Component: 200 - total flux cleaned = 0.00611764 Jy ! Total flux subtracted in 200 components = 0.00611764 Jy ! Clean residual min=-0.004271 max=0.004360 Jy/beam ! Clean residual mean=-0.000040 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 1.74573 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 226 components and 1.74573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233164Jy sigma=0.001223 ! Fit after self-cal, rms=0.233157Jy sigma=0.001223 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104136 Jy ! Component: 100 - total flux cleaned = 0.00121844 Jy ! Component: 150 - total flux cleaned = 0.00132303 Jy ! Component: 200 - total flux cleaned = 0.00141905 Jy ! Total flux subtracted in 200 components = 0.00141905 Jy ! Clean residual min=-0.004249 max=0.004181 Jy/beam ! Clean residual mean=-0.000049 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 1.74715 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 232 components and 1.74715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233150Jy sigma=0.001223 ! Fit after self-cal, rms=0.233149Jy sigma=0.001223 ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6467 mas, bmaj=1.356 mas, bpa=-3.597 degrees ! Estimated noise=437.888 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6467 x 1.356 at -3.597 degrees (North through East) ! Clean map min=-0.0038269 max=0.45902 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.5381 mas, bmaj=1.08 mas, bpa=-5.149 degrees ! Estimated noise=954.923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.397189 Jy ! Component: 100 - total flux cleaned = 0.641877 Jy ! Component: 150 - total flux cleaned = 0.817236 Jy ! Component: 200 - total flux cleaned = 0.952351 Jy ! Total flux subtracted in 200 components = 0.952351 Jy ! Clean residual min=-0.021976 max=0.080547 Jy/beam ! Clean residual mean=-0.000146 rms=0.009436 Jy/beam ! Combined flux in latest and established models = 0.952351 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 78 model components to the UV plane model. ! The established model now contains 78 components and 0.952351 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6467 mas, bmaj=1.356 mas, bpa=-3.597 degrees ! Estimated noise=437.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213884 Jy ! Component: 100 - total flux cleaned = 0.357786 Jy ! Component: 150 - total flux cleaned = 0.459118 Jy ! Component: 200 - total flux cleaned = 0.532317 Jy ! Total flux subtracted in 200 components = 0.532317 Jy ! Clean residual min=-0.012846 max=0.041912 Jy/beam ! Clean residual mean=0.000640 rms=0.007026 Jy/beam ! Combined flux in latest and established models = 1.48467 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 148 components and 1.48467 Jy ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-0.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542735 Jy ! Component: 100 - total flux cleaned = 0.0953703 Jy ! Component: 150 - total flux cleaned = 0.126946 Jy ! Component: 200 - total flux cleaned = 0.15152 Jy ! Total flux subtracted in 200 components = 0.15152 Jy ! Clean residual min=-0.006589 max=0.015843 Jy/beam ! Clean residual mean=0.000270 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 1.63619 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 212 components and 1.63619 Jy ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (-1.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196031 Jy ! Component: 100 - total flux cleaned = 0.0350194 Jy ! Component: 150 - total flux cleaned = 0.0472868 Jy ! Component: 200 - total flux cleaned = 0.0572095 Jy ! Total flux subtracted in 200 components = 0.0572095 Jy ! Clean residual min=-0.004605 max=0.007843 Jy/beam ! Clean residual mean=0.000127 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 1.6934 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 245 components and 1.6934 Jy ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Added new window around map position (1.4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874903 Jy ! Component: 100 - total flux cleaned = 0.0158873 Jy ! Component: 150 - total flux cleaned = 0.0219642 Jy ! Component: 200 - total flux cleaned = 0.0271558 Jy ! Total flux subtracted in 200 components = 0.0271558 Jy ! Clean residual min=-0.003564 max=0.004007 Jy/beam ! Clean residual mean=0.000054 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 1.72055 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 276 components and 1.72055 Jy ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=2.687 mas, bmaj=2.859 mas, bpa=82.41 degrees ! Estimated noise=544.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868292 Jy ! Component: 100 - total flux cleaned = 0.0146395 Jy ! Component: 150 - total flux cleaned = 0.0189702 Jy ! Component: 200 - total flux cleaned = 0.0221554 Jy ! Total flux subtracted in 200 components = 0.0221554 Jy ! Clean residual min=-0.004053 max=0.004642 Jy/beam ! Clean residual mean=-0.000017 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 1.74271 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236817 Jy ! Component: 100 - total flux cleaned = 0.00408825 Jy ! Component: 150 - total flux cleaned = 0.00478826 Jy ! Component: 200 - total flux cleaned = 0.00534724 Jy ! Total flux subtracted in 200 components = 0.00534724 Jy ! Clean residual min=-0.004444 max=0.004279 Jy/beam ! Clean residual mean=-0.000057 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 1.74806 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 317 components and 1.74806 Jy ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! Estimated beam: bmin=0.6467 mas, bmaj=1.356 mas, bpa=-3.597 degrees ! Estimated noise=437.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140228 Jy ! Component: 100 - total flux cleaned = 0.00187213 Jy ! Component: 150 - total flux cleaned = 0.00208498 Jy ! Component: 200 - total flux cleaned = 0.00214843 Jy ! Total flux subtracted in 200 components = 0.00214843 Jy ! Clean residual min=-0.003287 max=0.003199 Jy/beam ! Clean residual mean=-0.000029 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 1.7502 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 342 components and 1.7502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232622Jy sigma=0.001220 ! Fit after self-cal, rms=0.232429Jy sigma=0.001219 wmodel J2025+3343_X_2003_07_09_pus_map.mod ! Writing 342 model components to file: J2025+3343_X_2003_07_09_pus_map.mod wobs J2025+3343_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J2025+3343_X_2003_07_09_pus_uvs.fits wwins J2025+3343_X_2003_07_09_pus_map.win ! wwins: Wrote 14 windows to J2025+3343_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874076 Jy ! Component: 100 - total flux cleaned = -0.00172631 Jy ! Component: 150 - total flux cleaned = -0.00232102 Jy ! Component: 200 - total flux cleaned = -0.00304929 Jy ! Component: 250 - total flux cleaned = -0.00355372 Jy ! Component: 300 - total flux cleaned = -0.00389796 Jy ! Component: 350 - total flux cleaned = -0.00413856 Jy ! Component: 400 - total flux cleaned = -0.00437528 Jy ! Component: 450 - total flux cleaned = -0.00451476 Jy ! Component: 500 - total flux cleaned = -0.00483403 Jy ! Component: 550 - total flux cleaned = -0.00483316 Jy ! Component: 600 - total flux cleaned = -0.00505492 Jy ! Component: 650 - total flux cleaned = -0.00518563 Jy ! Component: 700 - total flux cleaned = -0.00527156 Jy ! Component: 750 - total flux cleaned = -0.00544172 Jy ! Component: 800 - total flux cleaned = -0.00544129 Jy ! Component: 850 - total flux cleaned = -0.00552498 Jy ! Component: 900 - total flux cleaned = -0.00556633 Jy ! Component: 950 - total flux cleaned = -0.00556655 Jy ! Component: 1000 - total flux cleaned = -0.00568753 Jy ! Component: 1050 - total flux cleaned = -0.00568785 Jy ! Component: 1100 - total flux cleaned = -0.00572804 Jy ! Component: 1150 - total flux cleaned = -0.00588518 Jy ! Component: 1200 - total flux cleaned = -0.00596278 Jy ! Component: 1250 - total flux cleaned = -0.00596253 Jy ! Component: 1300 - total flux cleaned = -0.00592406 Jy ! Component: 1350 - total flux cleaned = -0.00607611 Jy ! Component: 1400 - total flux cleaned = -0.00600043 Jy ! Component: 1450 - total flux cleaned = -0.0060005 Jy ! Component: 1500 - total flux cleaned = -0.00600089 Jy ! Component: 1550 - total flux cleaned = -0.00600139 Jy ! Component: 1600 - total flux cleaned = -0.0061474 Jy ! Component: 1650 - total flux cleaned = -0.00600234 Jy ! Component: 1700 - total flux cleaned = -0.00600222 Jy ! Component: 1750 - total flux cleaned = -0.00593085 Jy ! Component: 1800 - total flux cleaned = -0.00585999 Jy ! Component: 1850 - total flux cleaned = -0.00585996 Jy ! Component: 1900 - total flux cleaned = -0.00586008 Jy ! Component: 1950 - total flux cleaned = -0.00582547 Jy ! Component: 2000 - total flux cleaned = -0.0057562 Jy ! Total flux subtracted in 2048 components = -0.005894 Jy ! Clean residual min=-0.001762 max=0.002020 Jy/beam ! Clean residual mean=-0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 1.74431 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 511 components and 1.74431 Jy ![Exited script file: muppet] wmap "J2025+3343_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6467 x 1.356 at -3.597 degrees (North through East) ! Clean map min=-0.0031675 max=0.46018 Jy/beam ! Writing clean map to FITS file: J2025+3343_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.460175 invert ! Inverting map ! Your choice of large map pixels excluded 0.586% of the data. ! The x-axis pixel size should ideally be below 0.1637 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00063898 device "J2025+3343_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2025+3343_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.416568 0.416568 0.833135 1.66627 3.33254 6.66508 13.3302 26.6603 53.3207 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.46 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6467 x 1.356 at -3.597 degrees (North through East) ! Clean map min=-0.0031675 max=0.46018 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J2025+3343_X_2003_07_09_pus_uvs.log closed on Sun Apr 7 16:52:30 2013