! Started logfile: J1924-2914_X_2003_07_09_pus_uvs.log on Sun Apr  7 16:47:09 2013
obs J1924-2914_X_2003_07_09_pus_uva.fits
! Reading UV FITS file: J1924-2914_X_2003_07_09_pus_uva.fits
! AN table 1: 25 integrations on 171 of 171 possible baselines.
! AN table 2: 42 integrations on 171 of 171 possible baselines.
! AN table 3: 114 integrations on 171 of 171 possible baselines.
! AN table 4: 41 integrations on 171 of 171 possible baselines.
! AN table 5: 77 integrations on 171 of 171 possible baselines.
! AN table 6: 22 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.0660035 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1924-2914
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1874 lines of history.
! 
! Reading 14492 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1924-2914_X_2003_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1015 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1014 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1015 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1014 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=5.934487Jy  sigma=0.050584
! Fit after  self-cal, rms=5.430726Jy  sigma=0.046523
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.7021 mas, bmaj=2.234 mas, bpa=7.655 degrees
! Estimated noise=1474.49 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.45924 Jy
! Component: 100  -  total flux cleaned = 5.47273 Jy
! Total flux subtracted in 100 components = 5.47273 Jy
! Clean residual min=-0.188755 max=0.399056 Jy/beam
! Clean residual mean=0.004563 rms=0.062075 Jy/beam
! Combined flux in latest and established models = 5.47273 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 5.47273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.688582Jy  sigma=0.014969
! Fit after  self-cal, rms=1.688625Jy  sigma=0.014969
! Inverting map 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-0.4, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.451959 Jy
! Component: 100  -  total flux cleaned = 0.763507 Jy
! Total flux subtracted in 100 components = 0.763507 Jy
! Clean residual min=-0.193130 max=0.327667 Jy/beam
! Clean residual mean=0.002120 rms=0.052715 Jy/beam
! Combined flux in latest and established models = 6.23624 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 6.23624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.398436Jy  sigma=0.012061
! Fit after  self-cal, rms=1.396786Jy  sigma=0.012051
! Inverting map 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (1.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.313002 Jy
! Component: 100  -  total flux cleaned = 0.520927 Jy
! Total flux subtracted in 100 components = 0.520927 Jy
! Clean residual min=-0.199947 max=0.267013 Jy/beam
! Clean residual mean=0.000371 rms=0.047851 Jy/beam
! Combined flux in latest and established models = 6.75717 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 6.75717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.239431Jy  sigma=0.010492
! Fit after  self-cal, rms=1.228372Jy  sigma=0.010420
! Inverting map 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.015 mas, bmaj=2.893 mas, bpa=6.444 degrees
! Estimated noise=744.949 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.45228 Jy
! Component: 100  -  total flux cleaned = 0.687466 Jy
! Component: 150  -  total flux cleaned = 0.823003 Jy
! Component: 200  -  total flux cleaned = 0.85998 Jy
! Total flux subtracted in 200 components = 0.85998 Jy
! Clean residual min=-0.177144 max=0.326887 Jy/beam
! Clean residual mean=-0.008179 rms=0.075215 Jy/beam
! Combined flux in latest and established models = 7.61715 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 7.61715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.092735Jy  sigma=0.008797
! Fit after  self-cal, rms=1.073328Jy  sigma=0.008671
! Inverting map 
! Your choice of large map pixels excluded 0.129% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.26     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.04     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.01     TC        1.00*    
!   TS        1.00*    WF        1.06     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.12     LA        1.00*    MA        1.00*    
!   MK        0.89     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        1.02     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.39     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.07     FD        0.88     GC        1.00*    GG        1.00*    
!   HN        1.08     KP        0.99     LA        1.05     MA        1.00*    
!   MK        1.00*    NL        1.01     NY        1.00*    ON        1.00*    
!   OV        1.02     PT        1.01     SC        0.96     TC        1.00*    
!   TS        1.00*    WF        1.01     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     FD        0.99     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.92     LA        0.98     MA        1.00*    
!   MK        0.91     NL        1.31     NY        1.00*    ON        1.00*    
!   OV        0.99     PT        0.97     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.00     FD        0.95     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.94     LA        0.97     MA        1.00*    
!   MK        0.92     NL        1.28     NY        1.00*    ON        1.00*    
!   OV        0.92     PT        0.93     SC        1.04     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.05     GC        1.00*    GG        1.00*    
!   HN        1.27     KP        1.30     LA        1.21     MA        1.00*    
!   MK        1.00*    NL        1.53     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.15     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.92     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.28     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.05     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.04     TC        1.00*    
!   TS        1.00*    WF        1.08     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.12     LA        1.00*    MA        1.00*    
!   MK        0.90     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        1.01     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.42     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.08     FD        0.88     GC        1.00*    GG        1.00*    
!   HN        1.09     KP        0.95     LA        1.05     MA        1.00*    
!   MK        1.00*    NL        0.98     NY        1.00*    ON        1.00*    
!   OV        1.01     PT        1.06     SC        0.94     TC        1.00*    
!   TS        1.00*    WF        1.03     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.02     FD        0.98     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.88     LA        0.98     MA        1.00*    
!   MK        0.92     NL        1.26     NY        1.00*    ON        1.00*    
!   OV        0.99     PT        1.01     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.02     FD        0.95     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.91     LA        0.97     MA        1.00*    
!   MK        0.93     NL        1.23     NY        1.00*    ON        1.00*    
!   OV        0.91     PT        0.97     SC        1.00     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.05     GC        1.00*    GG        1.00*    
!   HN        1.28     KP        1.25     LA        1.21     MA        1.00*    
!   MK        1.00*    NL        1.52     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.20     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.94     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.24     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.07     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        0.99     TC        1.00*    
!   TS        1.00*    WF        1.02     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.09     LA        1.00*    MA        1.00*    
!   MK        0.89     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        1.05     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.41     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     FD        0.87     GC        1.00*    GG        1.00*    
!   HN        1.06     KP        0.89     LA        1.05     MA        1.00*    
!   MK        1.00*    NL        0.94     NY        1.00*    ON        1.00*    
!   OV        1.03     PT        1.07     SC        0.95     TC        1.00*    
!   TS        1.00*    WF        1.09     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.04     FD        0.96     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.82     LA        0.99     MA        1.00*    
!   MK        0.90     NL        1.23     NY        1.00*    ON        1.00*    
!   OV        1.02     PT        1.03     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.02     FD        0.93     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.86     LA        0.98     MA        1.00*    
!   MK        0.93     NL        1.18     NY        1.00*    ON        1.00*    
!   OV        0.93     PT        1.00     SC        1.01     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.03     GC        1.00*    GG        1.00*    
!   HN        1.24     KP        1.17     LA        1.20     MA        1.00*    
!   MK        1.00*    NL        1.57     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.20     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.91     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.28     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.03     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.03     TC        1.00*    
!   TS        1.00*    WF        1.02     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.10     LA        1.00*    MA        1.00*    
!   MK        0.92     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        1.04     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.34     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.07     FD        0.86     GC        1.00*    GG        1.00*    
!   HN        1.10     KP        0.93     LA        1.02     MA        1.00*    
!   MK        1.00*    NL        0.94     NY        1.00*    ON        1.00*    
!   OV        1.02     PT        1.07     SC        1.00     TC        1.00*    
!   TS        1.00*    WF        1.07     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     FD        0.95     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.87     LA        0.97     MA        1.00*    
!   MK        0.92     NL        1.23     NY        1.00*    ON        1.00*    
!   OV        1.01     PT        1.03     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.00     FD        0.92     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.90     LA        0.96     MA        1.00*    
!   MK        0.96     NL        1.18     NY        1.00*    ON        1.00*    
!   OV        0.92     PT        1.00     SC        1.06     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.02     GC        1.00*    GG        1.00*    
!   HN        1.27     KP        1.21     LA        1.17     MA        1.00*    
!   MK        1.00*    NL        1.48     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.20     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.89     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=1.073328Jy  sigma=0.008671
! Fit after  self-cal, rms=0.681420Jy  sigma=0.005153
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.04 mas, bmaj=2.942 mas, bpa=7.079 degrees
! Estimated noise=750.991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.4, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.184923 Jy
! Component: 100  -  total flux cleaned = 0.229156 Jy
! Component: 150  -  total flux cleaned = 0.254691 Jy
! Component: 200  -  total flux cleaned = 0.27873 Jy
! Total flux subtracted in 200 components = 0.27873 Jy
! Clean residual min=-0.128522 max=0.110703 Jy/beam
! Clean residual mean=-0.004224 rms=0.026661 Jy/beam
! Combined flux in latest and established models = 7.89588 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 86 components and 7.89588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.594604Jy  sigma=0.004369
! Fit after  self-cal, rms=0.583471Jy  sigma=0.004266
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.583471Jy  sigma=0.004266
! Fit after  self-cal, rms=0.505813Jy  sigma=0.003634
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.04 mas, bmaj=2.943 mas, bpa=7.083 degrees
! Estimated noise=749.096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714786 Jy
! Component: 100  -  total flux cleaned = 0.0982483 Jy
! Component: 150  -  total flux cleaned = 0.115881 Jy
! Component: 200  -  total flux cleaned = 0.126508 Jy
! Total flux subtracted in 200 components = 0.126508 Jy
! Clean residual min=-0.077302 max=0.088061 Jy/beam
! Clean residual mean=-0.002570 rms=0.019820 Jy/beam
! Combined flux in latest and established models = 8.02239 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 110 components and 8.02238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.467209Jy  sigma=0.003278
! Fit after  self-cal, rms=0.461731Jy  sigma=0.003229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0810064 Jy
! Component: 100  -  total flux cleaned = 0.096681 Jy
! Component: 150  -  total flux cleaned = 0.103444 Jy
! Component: 200  -  total flux cleaned = 0.105425 Jy
! Total flux subtracted in 200 components = 0.105425 Jy
! Clean residual min=-0.072008 max=0.056893 Jy/beam
! Clean residual mean=-0.003658 rms=0.015921 Jy/beam
! Combined flux in latest and established models = 8.12781 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 132 components and 8.12781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.434083Jy  sigma=0.002951
! Fit after  self-cal, rms=0.430261Jy  sigma=0.002921
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.430261Jy  sigma=0.002921
! Fit after  self-cal, rms=0.406635Jy  sigma=0.002774
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.041 mas, bmaj=2.947 mas, bpa=7.051 degrees
! Estimated noise=746.725 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243187 Jy
! Component: 100  -  total flux cleaned = 0.0306909 Jy
! Component: 150  -  total flux cleaned = 0.0345627 Jy
! Component: 200  -  total flux cleaned = 0.0362672 Jy
! Total flux subtracted in 200 components = 0.0362672 Jy
! Clean residual min=-0.057882 max=0.051377 Jy/beam
! Clean residual mean=-0.002666 rms=0.012911 Jy/beam
! Combined flux in latest and established models = 8.16408 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 151 components and 8.16408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.386803Jy  sigma=0.002587
! Fit after  self-cal, rms=0.384779Jy  sigma=0.002572
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187291 Jy
! Component: 100  -  total flux cleaned = 0.0216177 Jy
! Component: 150  -  total flux cleaned = 0.0215645 Jy
! Component: 200  -  total flux cleaned = 0.0215924 Jy
! Total flux subtracted in 200 components = 0.0215924 Jy
! Clean residual min=-0.056449 max=0.046190 Jy/beam
! Clean residual mean=-0.002897 rms=0.011714 Jy/beam
! Combined flux in latest and established models = 8.18567 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 159 components and 8.18567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.375045Jy  sigma=0.002483
! Fit after  self-cal, rms=0.374332Jy  sigma=0.002478
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.374332Jy  sigma=0.002478
! Fit after  self-cal, rms=0.363866Jy  sigma=0.002446
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.508 mas, bmaj=5.929 mas, bpa=5.466 degrees
! Estimated noise=858.316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220074 Jy
! Component: 100  -  total flux cleaned = 0.0219545 Jy
! Component: 150  -  total flux cleaned = 0.0234608 Jy
! Component: 200  -  total flux cleaned = 0.0246402 Jy
! Total flux subtracted in 200 components = 0.0246402 Jy
! Clean residual min=-0.052829 max=0.044465 Jy/beam
! Clean residual mean=-0.004455 rms=0.012589 Jy/beam
! Combined flux in latest and established models = 8.21031 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 176 components and 8.21031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.356922Jy  sigma=0.002376
! Fit after  self-cal, rms=0.355665Jy  sigma=0.002363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117581 Jy
! Component: 100  -  total flux cleaned = 0.0137306 Jy
! Component: 150  -  total flux cleaned = 0.0137424 Jy
! Component: 200  -  total flux cleaned = 0.01372 Jy
! Total flux subtracted in 200 components = 0.01372 Jy
! Clean residual min=-0.052862 max=0.038979 Jy/beam
! Clean residual mean=-0.004701 rms=0.011608 Jy/beam
! Combined flux in latest and established models = 8.22403 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 181 components and 8.22403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354397Jy  sigma=0.002352
! Fit after  self-cal, rms=0.354080Jy  sigma=0.002347
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.041 mas, bmaj=2.95 mas, bpa=7.053 degrees
! Estimated noise=744.854 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.95 at 7.053 degrees (North through East)
! Clean map  min=-0.063046  max=5.6885 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354080Jy  sigma=0.002347
! Fit after  self-cal, rms=0.289062Jy  sigma=0.001827
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.04 mas, bmaj=2.948 mas, bpa=7.093 degrees
! Estimated noise=743.091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.018439 Jy
! Component: 100  -  total flux cleaned = -0.0183836 Jy
! Component: 150  -  total flux cleaned = -0.0184062 Jy
! Component: 200  -  total flux cleaned = -0.01845 Jy
! Total flux subtracted in 200 components = -0.01845 Jy
! Clean residual min=-0.045059 max=0.041305 Jy/beam
! Clean residual mean=-0.001999 rms=0.008748 Jy/beam
! Combined flux in latest and established models = 8.20558 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 195 components and 8.20558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.279775Jy  sigma=0.001757
! Fit after  self-cal, rms=0.279349Jy  sigma=0.001754
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177975 Jy
! Component: 100  -  total flux cleaned = 0.00264647 Jy
! Component: 150  -  total flux cleaned = 0.00183585 Jy
! Component: 200  -  total flux cleaned = 0.00107946 Jy
! Total flux subtracted in 200 components = 0.00107946 Jy
! Clean residual min=-0.044298 max=0.039551 Jy/beam
! Clean residual mean=-0.002014 rms=0.008481 Jy/beam
! Combined flux in latest and established models = 8.20666 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 202 components and 8.20666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274306Jy  sigma=0.001712
! Fit after  self-cal, rms=0.274103Jy  sigma=0.001711
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274103Jy  sigma=0.001711
! Fit after  self-cal, rms=0.269203Jy  sigma=0.001698
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.7066 mas, bmaj=2.241 mas, bpa=8.131 degrees
! Estimated noise=1516.97 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.50781 Jy
! Component: 100  -  total flux cleaned = 5.51248 Jy
! Component: 150  -  total flux cleaned = 5.90811 Jy
! Component: 200  -  total flux cleaned = 6.19378 Jy
! Total flux subtracted in 200 components = 6.19378 Jy
! Clean residual min=-0.066873 max=0.172859 Jy/beam
! Clean residual mean=0.005596 rms=0.028723 Jy/beam
! Combined flux in latest and established models = 6.19379 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 6.19379 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.041 mas, bmaj=2.953 mas, bpa=7.113 degrees
! Estimated noise=742.367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.602173 Jy
! Component: 100  -  total flux cleaned = 0.969595 Jy
! Component: 150  -  total flux cleaned = 1.22719 Jy
! Component: 200  -  total flux cleaned = 1.41355 Jy
! Total flux subtracted in 200 components = 1.41355 Jy
! Clean residual min=-0.056033 max=0.133294 Jy/beam
! Clean residual mean=0.004022 rms=0.031075 Jy/beam
! Combined flux in latest and established models = 7.60734 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 144 components and 7.60734 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (4.2, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144625 Jy
! Component: 100  -  total flux cleaned = 0.249435 Jy
! Component: 150  -  total flux cleaned = 0.330322 Jy
! Component: 200  -  total flux cleaned = 0.393658 Jy
! Total flux subtracted in 200 components = 0.393658 Jy
! Clean residual min=-0.041157 max=0.050618 Jy/beam
! Clean residual mean=0.000118 rms=0.013689 Jy/beam
! Combined flux in latest and established models = 8.001 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 193 components and 8.001 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.513 mas, bmaj=5.945 mas, bpa=5.568 degrees
! Estimated noise=854.327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0723292 Jy
! Component: 100  -  total flux cleaned = 0.122463 Jy
! Component: 150  -  total flux cleaned = 0.158301 Jy
! Component: 200  -  total flux cleaned = 0.18411 Jy
! Total flux subtracted in 200 components = 0.18411 Jy
! Clean residual min=-0.038670 max=0.033786 Jy/beam
! Clean residual mean=-0.002897 rms=0.010326 Jy/beam
! Combined flux in latest and established models = 8.18511 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186762 Jy
! Component: 100  -  total flux cleaned = 0.0246109 Jy
! Component: 150  -  total flux cleaned = 0.0262304 Jy
! Component: 200  -  total flux cleaned = 0.027247 Jy
! Total flux subtracted in 200 components = 0.027247 Jy
! Clean residual min=-0.037200 max=0.030994 Jy/beam
! Clean residual mean=-0.003358 rms=0.009151 Jy/beam
! Combined flux in latest and established models = 8.21235 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 233 components and 8.21235 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=1.041 mas, bmaj=2.953 mas, bpa=7.113 degrees
! Estimated noise=742.367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00258006 Jy
! Component: 100  -  total flux cleaned = -0.00255493 Jy
! Component: 150  -  total flux cleaned = -0.00175521 Jy
! Component: 200  -  total flux cleaned = -0.0017357 Jy
! Total flux subtracted in 200 components = -0.0017357 Jy
! Clean residual min=-0.034560 max=0.027413 Jy/beam
! Clean residual mean=-0.001924 rms=0.007229 Jy/beam
! Combined flux in latest and established models = 8.21062 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 247 components and 8.21062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263855Jy  sigma=0.001607
! Fit after  self-cal, rms=0.259890Jy  sigma=0.001576
wmodel J1924-2914_X_2003_07_09_pus_map.mod
! Writing 247 model components to file: J1924-2914_X_2003_07_09_pus_map.mod
wobs J1924-2914_X_2003_07_09_pus_uvs.fits
! Writing UV FITS file: J1924-2914_X_2003_07_09_pus_uvs.fits
wwins J1924-2914_X_2003_07_09_pus_map.win
! wwins: Wrote 6 windows to J1924-2914_X_2003_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00730624 Jy
! Component: 100  -  total flux cleaned = -0.0126837 Jy
! Component: 150  -  total flux cleaned = -0.0172561 Jy
! Component: 200  -  total flux cleaned = -0.0228441 Jy
! Component: 250  -  total flux cleaned = -0.0277456 Jy
! Component: 300  -  total flux cleaned = -0.0328213 Jy
! Component: 350  -  total flux cleaned = -0.036963 Jy
! Component: 400  -  total flux cleaned = -0.0406089 Jy
! Component: 450  -  total flux cleaned = -0.0448241 Jy
! Component: 500  -  total flux cleaned = -0.0478838 Jy
! Component: 550  -  total flux cleaned = -0.0515182 Jy
! Component: 600  -  total flux cleaned = -0.0540986 Jy
! Component: 650  -  total flux cleaned = -0.0578745 Jy
! Component: 700  -  total flux cleaned = -0.0603306 Jy
! Component: 750  -  total flux cleaned = -0.0630362 Jy
! Component: 800  -  total flux cleaned = -0.0653954 Jy
! Component: 850  -  total flux cleaned = -0.0682812 Jy
! Component: 900  -  total flux cleaned = -0.0699788 Jy
! Component: 950  -  total flux cleaned = -0.0719299 Jy
! Component: 1000  -  total flux cleaned = -0.0738458 Jy
! Component: 1050  -  total flux cleaned = -0.0751925 Jy
! Component: 1100  -  total flux cleaned = -0.0770512 Jy
! Component: 1150  -  total flux cleaned = -0.0791377 Jy
! Component: 1200  -  total flux cleaned = -0.080421 Jy
! Component: 1250  -  total flux cleaned = -0.0816917 Jy
! Component: 1300  -  total flux cleaned = -0.0831946 Jy
! Component: 1350  -  total flux cleaned = -0.0846777 Jy
! Component: 1400  -  total flux cleaned = -0.0861426 Jy
! Component: 1450  -  total flux cleaned = -0.0880703 Jy
! Component: 1500  -  total flux cleaned = -0.0892577 Jy
! Component: 1550  -  total flux cleaned = -0.0911418 Jy
! Component: 1600  -  total flux cleaned = -0.0927695 Jy
! Component: 1650  -  total flux cleaned = -0.0950677 Jy
! Component: 1700  -  total flux cleaned = -0.0968863 Jy
! Component: 1750  -  total flux cleaned = -0.0986851 Jy
! Component: 1800  -  total flux cleaned = -0.100021 Jy
! Component: 1850  -  total flux cleaned = -0.10201 Jy
! Component: 1900  -  total flux cleaned = -0.10354 Jy
! Component: 1950  -  total flux cleaned = -0.104626 Jy
! Component: 2000  -  total flux cleaned = -0.106561 Jy
! Total flux subtracted in 2048 components = -0.108265 Jy
! Clean residual min=-0.010617 max=0.010633 Jy/beam
! Clean residual mean=-0.000983 rms=0.004260 Jy/beam
! Combined flux in latest and established models = 8.10235 Jy
keep
! Adding 156 model components to the UV plane model.
! The established model now contains 402 components and 8.10235 Jy
![Exited script file: muppet]
wmap "J1924-2914_X_2003_07_09_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.953 at 7.113 degrees (North through East)
! Clean map  min=-0.027151  max=5.814 Jy/beam
! Writing clean map to FITS file: J1924-2914_X_2003_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 5.81397 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0796% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00426465 
device "J1924-2914_X_2003_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1924-2914_X_2003_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.220056 0.220056 0.440111 0.880222 1.76044 3.52089 7.04178 14.0836 28.1671 56.3342
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0127 
print "peak=",int(1000*peak_flux)/1000
! peak= 5.813 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.953 at 7.113 degrees (North through East)
! Clean map  min=-0.027151  max=5.814 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
quit
! Quitting program
! Log file J1924-2914_X_2003_07_09_pus_uvs.log closed on Sun Apr  7 16:47:19 2013