! Started logfile: J1924-2914_S_2003_07_09_pus_uvs.log on Mon Apr  8 12:09:23 2013
obs J1924-2914_S_2003_07_09_pus_uva.fits
! Reading UV FITS file: J1924-2914_S_2003_07_09_pus_uva.fits
! AN table 1: 25 integrations on 171 of 171 possible baselines.
! AN table 2: 42 integrations on 171 of 171 possible baselines.
! AN table 3: 114 integrations on 171 of 171 possible baselines.
! AN table 4: 41 integrations on 171 of 171 possible baselines.
! AN table 5: 77 integrations on 171 of 171 possible baselines.
! AN table 6: 22 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.0662404 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1924-2914
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1520 lines of history.
! 
! Reading 14544 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1924-2914_S_2003_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1013 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1821 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1014 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1823 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1015 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 409 telescope corrections were flagged in sub-array 1.
!  A total of 733 telescope corrections were flagged in sub-array 2.
!  A total of 1822 telescope corrections were flagged in sub-array 3.
!  A total of 523 telescope corrections were flagged in sub-array 4.
!  A total of 1013 telescope corrections were flagged in sub-array 5.
!  A total of 313 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=5.138516Jy  sigma=0.042251
! Fit after  self-cal, rms=4.752491Jy  sigma=0.039157
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.623 mas, bmaj=7.95 mas, bpa=7.928 degrees
! Estimated noise=1513.43 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.65061 Jy
! Component: 100  -  total flux cleaned = 3.89818 Jy
! Total flux subtracted in 100 components = 3.89818 Jy
! Clean residual min=-0.261226 max=0.808367 Jy/beam
! Clean residual mean=0.004559 rms=0.105007 Jy/beam
! Combined flux in latest and established models = 3.89818 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 3.89818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.775378Jy  sigma=0.022761
! Fit after  self-cal, rms=2.760332Jy  sigma=0.022726
! Inverting map 
! Added new window around map position (4, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.915642 Jy
! Component: 100  -  total flux cleaned = 1.54188 Jy
! Total flux subtracted in 100 components = 1.54188 Jy
! Clean residual min=-0.216248 max=0.490001 Jy/beam
! Clean residual mean=0.001990 rms=0.067781 Jy/beam
! Combined flux in latest and established models = 5.44006 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 51 components and 5.44006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.913828Jy  sigma=0.015590
! Fit after  self-cal, rms=1.894113Jy  sigma=0.015493
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.487592 Jy
! Component: 100  -  total flux cleaned = 0.818789 Jy
! Total flux subtracted in 100 components = 0.818789 Jy
! Clean residual min=-0.174269 max=0.295760 Jy/beam
! Clean residual mean=0.000573 rms=0.051415 Jy/beam
! Combined flux in latest and established models = 6.25885 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 64 components and 6.25884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.547031Jy  sigma=0.012550
! Fit after  self-cal, rms=1.538674Jy  sigma=0.012503
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.787 mas, bmaj=10.85 mas, bpa=6.381 degrees
! Estimated noise=803.658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.627979 Jy
! Component: 100  -  total flux cleaned = 0.928589 Jy
! Component: 150  -  total flux cleaned = 1.09007 Jy
! Component: 200  -  total flux cleaned = 1.17936 Jy
! Total flux subtracted in 200 components = 1.17936 Jy
! Clean residual min=-0.139244 max=0.171497 Jy/beam
! Clean residual mean=-0.007582 rms=0.047474 Jy/beam
! Combined flux in latest and established models = 7.43821 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 111 components and 7.43821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.310893Jy  sigma=0.010528
! Fit after  self-cal, rms=1.305605Jy  sigma=0.010496
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.18     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.23     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        0.84     TC        1.00*    
!   TS        1.00*    WF        0.93     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.77     LA        1.00*    MA        1.00*    
!   MK        0.99     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        0.97     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.39     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.91     FD        1.06     GC        1.00*    GG        1.00*    
!   HN        0.96     KP        0.84     LA        1.16     MA        1.00*    
!   MK        1.00*    NL        0.98     NY        1.00*    ON        1.00*    
!   OV        1.00     PT        1.02     SC        0.91     TC        1.00*    
!   TS        1.00*    WF        0.92     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     FD        1.14     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.84     LA        1.21     MA        1.00*    
!   MK        1.10     NL        1.03     NY        1.00*    ON        1.00*    
!   OV        1.02     PT        1.06     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.11     FD        1.13     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.86     LA        1.14     MA        1.00*    
!   MK        0.82     NL        1.01     NY        1.00*    ON        1.00*    
!   OV        0.78     PT        1.01     SC        0.94     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.27     GC        1.00*    GG        1.00*    
!   HN        1.36     KP        0.90     LA        1.37     MA        1.00*    
!   MK        1.00*    NL        1.47     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.23     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.91     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.42     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.29     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        0.87     TC        1.00*    
!   TS        1.00*    WF        0.91     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.96     LA        1.00*    MA        1.00*    
!   MK        1.01     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        1.03     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.41     WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        0.99     GC        1.00*    GG        1.00*    
!   HN        1.07     KP        0.93     LA        1.10     MA        1.00*    
!   MK        1.00*    NL        1.01     NY        1.00*    ON        1.00*    
!   OV        0.97     PT        1.02     SC        0.94     TC        1.00*    
!   TS        1.00*    WF        0.91     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.12     FD        1.06     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.97     LA        1.14     MA        1.00*    
!   MK        1.13     NL        1.05     NY        1.00*    ON        1.00*    
!   OV        1.05     PT        1.05     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.22     FD        1.05     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        1.08     MA        1.00*    
!   MK        0.87     NL        1.04     NY        1.00*    ON        1.00*    
!   OV        0.93     PT        1.01     SC        0.96     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.16     GC        1.00*    GG        1.00*    
!   HN        1.47     KP        1.09     LA        1.28     MA        1.00*    
!   MK        1.00*    NL        1.61     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.22     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.89     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.40     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.32     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.01     TC        1.00*    
!   TS        1.00*    WF        0.92     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.04     LA        1.00*    MA        1.00*    
!   MK        0.94     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        0.85     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.34     WF        1.00*    WZ        1.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.25     FD        0.97     GC        1.00*    GG        1.00*    
!   HN        1.09     KP        0.92     LA        0.90     MA        1.00*    
!   MK        1.00*    NL        1.04     NY        1.00*    ON        1.00*    
!   OV        1.30     PT        1.06     SC        1.06     TC        1.00*    
!   TS        1.00*    WF        0.91     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.21     FD        1.01     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.97     LA        0.94     MA        1.00*    
!   MK        1.03     NL        1.11     NY        1.00*    ON        1.00*    
!   OV        1.05     PT        1.09     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.65     FD        1.00     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        0.90     MA        1.00*    
!   MK        0.83     NL        1.09     NY        1.00*    ON        1.00*    
!   OV        0.89     PT        1.05     SC        1.10     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.12     GC        1.00*    GG        1.00*    
!   HN        1.63     KP        1.10     LA        1.07     MA        1.00*    
!   MK        1.00*    NL        1.62     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.25     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.22     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.65     FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.05     KP        1.00*    LA        1.00*    MA        1.00*    
!   MK        1.00*    NL        1.27     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.00*    SC        0.97     TC        1.00*    
!   TS        1.00*    WF        0.89     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        1.00*    MA        1.00*    
!   MK        0.88     NL        1.00*    NY        1.00*    ON        1.00*    
!   OV        0.72     PT        1.00*    SC        1.00*    TC        1.00*    
!   TS        1.35     WF        1.00*    WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.92     FD        0.85     GC        1.00*    GG        1.00*    
!   HN        1.10     KP        0.94     LA        0.73     MA        1.00*    
!   MK        1.00*    NL        0.98     NY        1.00*    ON        1.00*    
!   OV        1.18     PT        1.01     SC        1.04     TC        1.00*    
!   TS        1.00*    WF        0.88     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.87     FD        0.90     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.96     LA        0.76     MA        1.00*    
!   MK        0.96     NL        1.07     NY        1.00*    ON        1.00*    
!   OV        0.88     PT        1.03     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.78     FD        0.90     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        0.72     MA        1.00*    
!   MK        0.75     NL        1.01     NY        1.00*    ON        1.00*    
!   OV        0.75     PT        1.01     SC        1.09     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.00*    FD        1.01     GC        1.00*    GG        1.00*    
!   HN        1.26     KP        1.08     LA        0.85     MA        1.00*    
!   MK        1.00*    NL        1.59     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.20     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        0.87     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=1.305605Jy  sigma=0.010496
! Fit after  self-cal, rms=0.692781Jy  sigma=0.004296
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=10.97 mas, bpa=6.788 degrees
! Estimated noise=816.218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00378142 Jy
! Component: 100  -  total flux cleaned = -0.00523774 Jy
! Component: 150  -  total flux cleaned = -0.00787431 Jy
! Component: 200  -  total flux cleaned = -0.00902787 Jy
! Total flux subtracted in 200 components = -0.00902787 Jy
! Clean residual min=-0.047536 max=0.063063 Jy/beam
! Clean residual mean=-0.000049 rms=0.014666 Jy/beam
! Combined flux in latest and established models = 7.42918 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 121 components and 7.42918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.685066Jy  sigma=0.004263
! Fit after  self-cal, rms=0.685471Jy  sigma=0.004253
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.685471Jy  sigma=0.004253
! Fit after  self-cal, rms=0.628484Jy  sigma=0.003789
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.866 mas, bmaj=10.97 mas, bpa=6.672 degrees
! Estimated noise=818.029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013913 Jy
! Component: 100  -  total flux cleaned = 0.0128221 Jy
! Component: 150  -  total flux cleaned = 0.0118089 Jy
! Component: 200  -  total flux cleaned = 0.0118351 Jy
! Total flux subtracted in 200 components = 0.0118351 Jy
! Clean residual min=-0.048715 max=0.040381 Jy/beam
! Clean residual mean=-0.000584 rms=0.011648 Jy/beam
! Combined flux in latest and established models = 7.44102 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 124 components and 7.44102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.622778Jy  sigma=0.003760
! Fit after  self-cal, rms=0.621778Jy  sigma=0.003752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147396 Jy
! Component: 100  -  total flux cleaned = 0.00146275 Jy
! Component: 150  -  total flux cleaned = 0.000605625 Jy
! Component: 200  -  total flux cleaned = 0.000616106 Jy
! Total flux subtracted in 200 components = 0.000616106 Jy
! Clean residual min=-0.045909 max=0.038273 Jy/beam
! Clean residual mean=-0.000607 rms=0.011347 Jy/beam
! Combined flux in latest and established models = 7.44163 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 125 components and 7.44163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.617884Jy  sigma=0.003733
! Fit after  self-cal, rms=0.617184Jy  sigma=0.003727
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.617184Jy  sigma=0.003727
! Fit after  self-cal, rms=0.578908Jy  sigma=0.003091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.863 mas, bmaj=10.99 mas, bpa=6.519 degrees
! Estimated noise=818.119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000755949 Jy
! Component: 100  -  total flux cleaned = 0.00023143 Jy
! Component: 150  -  total flux cleaned = 0.00189204 Jy
! Component: 200  -  total flux cleaned = 0.002649 Jy
! Total flux subtracted in 200 components = 0.002649 Jy
! Clean residual min=-0.039433 max=0.037796 Jy/beam
! Clean residual mean=0.000405 rms=0.009374 Jy/beam
! Combined flux in latest and established models = 7.44428 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 130 components and 7.44428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.574836Jy  sigma=0.003065
! Fit after  self-cal, rms=0.574404Jy  sigma=0.003058
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792967 Jy
! Component: 100  -  total flux cleaned = 0.00251789 Jy
! Component: 150  -  total flux cleaned = 0.00176839 Jy
! Component: 200  -  total flux cleaned = 0.00237752 Jy
! Total flux subtracted in 200 components = 0.00237752 Jy
! Clean residual min=-0.037120 max=0.036199 Jy/beam
! Clean residual mean=0.000335 rms=0.009130 Jy/beam
! Combined flux in latest and established models = 7.44666 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 133 components and 7.44666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.571576Jy  sigma=0.003041
! Fit after  self-cal, rms=0.571093Jy  sigma=0.003037
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.571093Jy  sigma=0.003037
! Fit after  self-cal, rms=0.570974Jy  sigma=0.003032
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.894 mas, bmaj=20.95 mas, bpa=5.818 degrees
! Estimated noise=930.964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055183 Jy
! Component: 100  -  total flux cleaned = 0.0062391 Jy
! Component: 150  -  total flux cleaned = 0.00680253 Jy
! Component: 200  -  total flux cleaned = 0.00765959 Jy
! Total flux subtracted in 200 components = 0.00765959 Jy
! Clean residual min=-0.027427 max=0.037213 Jy/beam
! Clean residual mean=0.000671 rms=0.008679 Jy/beam
! Combined flux in latest and established models = 7.45432 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 144 components and 7.45432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.569240Jy  sigma=0.003021
! Fit after  self-cal, rms=0.568574Jy  sigma=0.003015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116445 Jy
! Component: 100  -  total flux cleaned = 0.00117651 Jy
! Component: 150  -  total flux cleaned = 0.00169123 Jy
! Component: 200  -  total flux cleaned = 0.00173012 Jy
! Total flux subtracted in 200 components = 0.00173012 Jy
! Clean residual min=-0.026162 max=0.036400 Jy/beam
! Clean residual mean=0.000587 rms=0.008744 Jy/beam
! Combined flux in latest and established models = 7.45605 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 150 components and 7.45605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.567107Jy  sigma=0.003005
! Fit after  self-cal, rms=0.566768Jy  sigma=0.003001
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.864 mas, bmaj=11.01 mas, bpa=6.484 degrees
! Estimated noise=819.369 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.864 x 11.01 at 6.484 degrees (North through East)
! Clean map  min=-0.034497  max=4.0711 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.566768Jy  sigma=0.003001
! Fit after  self-cal, rms=0.298584Jy  sigma=0.001765
! Inverting map and beam 
! Estimated beam: bmin=3.87 mas, bmaj=11.05 mas, bpa=6.537 degrees
! Estimated noise=821.138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000471416 Jy
! Component: 100  -  total flux cleaned = -0.00106769 Jy
! Component: 150  -  total flux cleaned = -0.0010992 Jy
! Component: 200  -  total flux cleaned = -0.00112167 Jy
! Total flux subtracted in 200 components = -0.00112167 Jy
! Clean residual min=-0.028782 max=0.029138 Jy/beam
! Clean residual mean=0.000621 rms=0.007404 Jy/beam
! Combined flux in latest and established models = 7.45493 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 155 components and 7.45493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.294178Jy  sigma=0.001741
! Fit after  self-cal, rms=0.293326Jy  sigma=0.001734
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104935 Jy
! Component: 100  -  total flux cleaned = -0.000417061 Jy
! Component: 150  -  total flux cleaned = 9.29083e-05 Jy
! Component: 200  -  total flux cleaned = 0.000582398 Jy
! Total flux subtracted in 200 components = 0.000582398 Jy
! Clean residual min=-0.027672 max=0.028755 Jy/beam
! Clean residual mean=0.000603 rms=0.007232 Jy/beam
! Combined flux in latest and established models = 7.45551 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 161 components and 7.45551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.290090Jy  sigma=0.001715
! Fit after  self-cal, rms=0.289324Jy  sigma=0.001709
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.289324Jy  sigma=0.001709
! Fit after  self-cal, rms=0.289078Jy  sigma=0.001706
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.616 mas, bmaj=7.956 mas, bpa=7.371 degrees
! Estimated noise=1559.22 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.7553 Jy
! Component: 100  -  total flux cleaned = 4.10999 Jy
! Component: 150  -  total flux cleaned = 4.99101 Jy
! Component: 200  -  total flux cleaned = 5.60421 Jy
! Total flux subtracted in 200 components = 5.60421 Jy
! Clean residual min=-0.111139 max=0.342841 Jy/beam
! Clean residual mean=0.002944 rms=0.050324 Jy/beam
! Combined flux in latest and established models = 5.60421 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 5.60421 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=11.07 mas, bpa=6.513 degrees
! Estimated noise=821.479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.941019 Jy
! Component: 100  -  total flux cleaned = 1.37322 Jy
! Component: 150  -  total flux cleaned = 1.59161 Jy
! Component: 200  -  total flux cleaned = 1.7063 Jy
! Total flux subtracted in 200 components = 1.7063 Jy
! Clean residual min=-0.027150 max=0.078359 Jy/beam
! Clean residual mean=0.004619 rms=0.013591 Jy/beam
! Combined flux in latest and established models = 7.31051 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 122 components and 7.31051 Jy
! Inverting map 
! Added new window around map position (-4, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714255 Jy
! Component: 100  -  total flux cleaned = 0.102314 Jy
! Component: 150  -  total flux cleaned = 0.112049 Jy
! Component: 200  -  total flux cleaned = 0.118327 Jy
! Total flux subtracted in 200 components = 0.118327 Jy
! Clean residual min=-0.027382 max=0.038513 Jy/beam
! Clean residual mean=0.001316 rms=0.007717 Jy/beam
! Combined flux in latest and established models = 7.42884 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 145 components and 7.42884 Jy
! Inverting map 
! Added new window around map position (9, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024793 Jy
! Component: 100  -  total flux cleaned = 0.0257432 Jy
! Component: 150  -  total flux cleaned = 0.0257686 Jy
! Component: 200  -  total flux cleaned = 0.0249551 Jy
! Total flux subtracted in 200 components = 0.0249551 Jy
! Clean residual min=-0.024926 max=0.025424 Jy/beam
! Clean residual mean=0.000634 rms=0.006839 Jy/beam
! Combined flux in latest and established models = 7.4538 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 7.45379 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.901 mas, bmaj=21.01 mas, bpa=5.966 degrees
! Estimated noise=931.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307136 Jy
! Component: 100  -  total flux cleaned = -0.000341199 Jy
! Component: 150  -  total flux cleaned = -0.000923337 Jy
! Component: 200  -  total flux cleaned = -0.00171057 Jy
! Total flux subtracted in 200 components = -0.00171057 Jy
! Clean residual min=-0.012027 max=0.020708 Jy/beam
! Clean residual mean=0.001097 rms=0.005216 Jy/beam
! Combined flux in latest and established models = 7.45208 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244644 Jy
! Component: 100  -  total flux cleaned = -0.000698302 Jy
! Component: 150  -  total flux cleaned = -0.000910326 Jy
! Component: 200  -  total flux cleaned = -0.00131653 Jy
! Total flux subtracted in 200 components = -0.00131653 Jy
! Clean residual min=-0.011958 max=0.020816 Jy/beam
! Clean residual mean=0.001155 rms=0.005194 Jy/beam
! Combined flux in latest and established models = 7.45077 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 193 components and 7.45077 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=11.07 mas, bpa=6.513 degrees
! Estimated noise=821.479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00320969 Jy
! Component: 100  -  total flux cleaned = -0.0032218 Jy
! Component: 150  -  total flux cleaned = -0.00321698 Jy
! Component: 200  -  total flux cleaned = -0.0032136 Jy
! Total flux subtracted in 200 components = -0.0032136 Jy
! Clean residual min=-0.024944 max=0.025685 Jy/beam
! Clean residual mean=0.000794 rms=0.006495 Jy/beam
! Combined flux in latest and established models = 7.44755 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 211 components and 7.44755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.276615Jy  sigma=0.001695
! Fit after  self-cal, rms=0.271519Jy  sigma=0.001619
wmodel J1924-2914_S_2003_07_09_pus_map.mod
! Writing 211 model components to file: J1924-2914_S_2003_07_09_pus_map.mod
wobs J1924-2914_S_2003_07_09_pus_uvs.fits
! Writing UV FITS file: J1924-2914_S_2003_07_09_pus_uvs.fits
wwins J1924-2914_S_2003_07_09_pus_map.win
! wwins: Wrote 4 windows to J1924-2914_S_2003_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206212 Jy
! Component: 100  -  total flux cleaned = 0.00438314 Jy
! Component: 150  -  total flux cleaned = 0.00583295 Jy
! Component: 200  -  total flux cleaned = 0.00792348 Jy
! Component: 250  -  total flux cleaned = 0.00927144 Jy
! Component: 300  -  total flux cleaned = 0.010905 Jy
! Component: 350  -  total flux cleaned = 0.0112238 Jy
! Component: 400  -  total flux cleaned = 0.0118487 Jy
! Component: 450  -  total flux cleaned = 0.0127712 Jy
! Component: 500  -  total flux cleaned = 0.0136755 Jy
! Component: 550  -  total flux cleaned = 0.0145658 Jy
! Component: 600  -  total flux cleaned = 0.0151472 Jy
! Component: 650  -  total flux cleaned = 0.0157211 Jy
! Component: 700  -  total flux cleaned = 0.0165719 Jy
! Component: 750  -  total flux cleaned = 0.0168498 Jy
! Component: 800  -  total flux cleaned = 0.017405 Jy
! Component: 850  -  total flux cleaned = 0.0179508 Jy
! Component: 900  -  total flux cleaned = 0.0184898 Jy
! Component: 950  -  total flux cleaned = 0.0187588 Jy
! Component: 1000  -  total flux cleaned = 0.0192888 Jy
! Component: 1050  -  total flux cleaned = 0.0195498 Jy
! Component: 1100  -  total flux cleaned = 0.0200666 Jy
! Component: 1150  -  total flux cleaned = 0.0200669 Jy
! Component: 1200  -  total flux cleaned = 0.0205754 Jy
! Component: 1250  -  total flux cleaned = 0.0208276 Jy
! Component: 1300  -  total flux cleaned = 0.0210779 Jy
! Component: 1350  -  total flux cleaned = 0.0218142 Jy
! Component: 1400  -  total flux cleaned = 0.0222998 Jy
! Component: 1450  -  total flux cleaned = 0.0227791 Jy
! Component: 1500  -  total flux cleaned = 0.023494 Jy
! Component: 1550  -  total flux cleaned = 0.0239677 Jy
! Component: 1600  -  total flux cleaned = 0.0244341 Jy
! Component: 1650  -  total flux cleaned = 0.0246643 Jy
! Component: 1700  -  total flux cleaned = 0.0248927 Jy
! Component: 1750  -  total flux cleaned = 0.0248933 Jy
! Component: 1800  -  total flux cleaned = 0.0253435 Jy
! Component: 1850  -  total flux cleaned = 0.0255685 Jy
! Component: 1900  -  total flux cleaned = 0.0257881 Jy
! Component: 1950  -  total flux cleaned = 0.0257893 Jy
! Component: 2000  -  total flux cleaned = 0.0262237 Jy
! Total flux subtracted in 2048 components = 0.0264384 Jy
! Clean residual min=-0.011002 max=0.011385 Jy/beam
! Clean residual mean=0.000268 rms=0.004162 Jy/beam
! Combined flux in latest and established models = 7.47399 Jy
keep
! Adding 106 model components to the UV plane model.
! The established model now contains 315 components and 7.47399 Jy
![Exited script file: muppet]
wmap "J1924-2914_S_2003_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.872 x 11.07 at 6.513 degrees (North through East)
! Clean map  min=-0.021201  max=4.12 Jy/beam
! Writing clean map to FITS file: J1924-2914_S_2003_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 4.11999 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00415252 
device "J1924-2914_S_2003_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1924-2914_S_2003_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.302369 0.302369 0.604737 1.20947 2.41895 4.8379 9.6758 19.3516 38.7032 77.4064
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0124 
print "peak=",int(1000*peak_flux)/1000
! peak= 4.119 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.872 x 11.07 at 6.513 degrees (North through East)
! Clean map  min=-0.021201  max=4.12 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
quit
! Quitting program
! Log file J1924-2914_S_2003_07_09_pus_uvs.log closed on Mon Apr  8 12:09:33 2013