! Started logfile: J1800+7828_S_2003_07_09_pus_uvs.log on Mon Apr 8 12:02:07 2013 obs J1800+7828_S_2003_07_09_pus_uva.fits ! Reading UV FITS file: J1800+7828_S_2003_07_09_pus_uva.fits ! AN table 1: 128 integrations on 171 of 171 possible baselines. ! AN table 2: 80 integrations on 171 of 171 possible baselines. ! AN table 3: 113 integrations on 171 of 171 possible baselines. ! AN table 4: 96 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.254856 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1800+7828 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1520 lines of history. ! ! Reading 72692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1800+7828_S_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1490 telescope corrections were flagged in sub-array 1. ! A total of 672 telescope corrections were flagged in sub-array 2. ! A total of 1423 telescope corrections were flagged in sub-array 3. ! A total of 903 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1567 telescope corrections were flagged in sub-array 1. ! A total of 701 telescope corrections were flagged in sub-array 2. ! A total of 1472 telescope corrections were flagged in sub-array 3. ! A total of 902 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1490 telescope corrections were flagged in sub-array 1. ! A total of 672 telescope corrections were flagged in sub-array 2. ! A total of 1423 telescope corrections were flagged in sub-array 3. ! A total of 901 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1493 telescope corrections were flagged in sub-array 1. ! A total of 673 telescope corrections were flagged in sub-array 2. ! A total of 1423 telescope corrections were flagged in sub-array 3. ! A total of 912 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.158617Jy sigma=0.007729 ! Fit after self-cal, rms=0.766572Jy sigma=0.005093 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=2.116 mas, bpa=-81.99 degrees ! Estimated noise=920.876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.981907 Jy ! Component: 100 - total flux cleaned = 1.30741 Jy ! Total flux subtracted in 100 components = 1.30741 Jy ! Clean residual min=-0.027034 max=0.147199 Jy/beam ! Clean residual mean=0.000212 rms=0.008368 Jy/beam ! Combined flux in latest and established models = 1.30741 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.30741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.613389Jy sigma=0.003830 ! Fit after self-cal, rms=0.612888Jy sigma=0.003829 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160994 Jy ! Component: 100 - total flux cleaned = 0.245401 Jy ! Total flux subtracted in 100 components = 0.245401 Jy ! Clean residual min=-0.023789 max=0.045300 Jy/beam ! Clean residual mean=0.000234 rms=0.006441 Jy/beam ! Combined flux in latest and established models = 1.55281 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 1.55281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536707Jy sigma=0.003175 ! Fit after self-cal, rms=0.536216Jy sigma=0.003174 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582334 Jy ! Component: 100 - total flux cleaned = 0.098501 Jy ! Total flux subtracted in 100 components = 0.098501 Jy ! Clean residual min=-0.023156 max=0.042273 Jy/beam ! Clean residual mean=0.000243 rms=0.006068 Jy/beam ! Combined flux in latest and established models = 1.65131 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 1.65131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520627Jy sigma=0.003034 ! Fit after self-cal, rms=0.520554Jy sigma=0.003034 ! Inverting map ! Added new window around map position (-4.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412258 Jy ! Component: 100 - total flux cleaned = 0.0699561 Jy ! Total flux subtracted in 100 components = 0.0699561 Jy ! Clean residual min=-0.022735 max=0.024221 Jy/beam ! Clean residual mean=0.000250 rms=0.005866 Jy/beam ! Combined flux in latest and established models = 1.72127 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 1.72127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512608Jy sigma=0.002958 ! Fit after self-cal, rms=0.511980Jy sigma=0.002956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=2.785 mas, bpa=-74.97 degrees ! Estimated noise=413.001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623382 Jy ! Component: 100 - total flux cleaned = 0.10008 Jy ! Component: 150 - total flux cleaned = 0.12419 Jy ! Component: 200 - total flux cleaned = 0.139704 Jy ! Total flux subtracted in 200 components = 0.139704 Jy ! Clean residual min=-0.019262 max=0.042248 Jy/beam ! Clean residual mean=0.004279 rms=0.007971 Jy/beam ! Combined flux in latest and established models = 1.86097 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 1.86097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504104Jy sigma=0.002887 ! Fit after self-cal, rms=0.503163Jy sigma=0.002882 ! Inverting map ! Added new window around map position (-25.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047467 Jy ! Component: 100 - total flux cleaned = 0.0759314 Jy ! Component: 150 - total flux cleaned = 0.0951737 Jy ! Component: 200 - total flux cleaned = 0.10923 Jy ! Total flux subtracted in 200 components = 0.10923 Jy ! Clean residual min=-0.018162 max=0.030324 Jy/beam ! Clean residual mean=0.003633 rms=0.006813 Jy/beam ! Combined flux in latest and established models = 1.9702 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 102 components and 1.9702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.497711Jy sigma=0.002844 ! Fit after self-cal, rms=0.497072Jy sigma=0.002839 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.15 GC 1.01 GG 1.00* ! HN 0.95 KP 0.90 LA 1.16 MA 0.99 ! MK 0.98 NL 0.99 NY 1.14 ON 1.23 ! OV 1.14 PT 1.03 SC 0.90 TC 1.00* ! TS 1.00 WF 0.67 WZ 0.94 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.06 GC 0.98 GG 1.00* ! HN 0.96 KP 0.89 LA 1.09 MA 0.99 ! MK 1.02 NL 0.92 NY 1.17 ON 1.20 ! OV 1.07 PT 0.98 SC 0.88 TC 1.00* ! TS 1.09 WF 0.89 WZ 0.96 ! ! A total of 30 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.18 GC 1.00 GG 1.00* ! HN 0.84 KP 1.05 LA 1.20 MA 1.06 ! MK 0.95 NL 1.01 NY 1.21 ON 1.24 ! OV 1.17 PT 1.06 SC 1.00* TC 1.00* ! TS 1.02 WF 0.81 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.16 GC 0.99 GG 1.00* ! HN 0.95 KP 1.02 LA 1.18 MA 1.00* ! MK 0.97 NL 1.01 NY 1.38 ON 1.00* ! OV 1.10 PT 1.04 SC 1.11 TC 1.00* ! TS 1.02 WF 0.86 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 GC 0.91 GG 1.00* ! HN 1.01 KP 0.98 LA 1.11 MA 1.00* ! MK 1.06 NL 1.03 NY 0.87 ON 1.01 ! OV 1.11 PT 1.02 SC 0.94 TC 1.00* ! TS 1.00 WF 0.91 WZ 0.95 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 GC 0.88 GG 1.00* ! HN 0.99 KP 0.96 LA 1.04 MA 1.00* ! MK 1.11 NL 0.96 NY 0.90 ON 1.02 ! OV 0.61 PT 0.97 SC 0.94 TC 1.00* ! TS 1.06 WF 0.90 WZ 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.09 GC 0.90 GG 1.00* ! HN 0.99 KP 1.06 LA 1.15 MA 1.00* ! MK 0.98 NL 1.07 NY 0.90 ON 1.02 ! OV 1.06 PT 1.06 SC 1.00* TC 1.00* ! TS 1.01 WF 0.91 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 FD 1.07 GC 0.90 GG 1.00* ! HN 1.00 KP 0.99 LA 1.12 MA 1.00* ! MK 1.05 NL 1.05 NY 0.88 ON 1.00* ! OV 1.10 PT 1.03 SC 1.12 TC 1.00* ! TS 1.02 WF 0.91 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.02 GC 1.13 GG 1.00* ! HN 1.01 KP 0.97 LA 0.90 MA 1.03 ! MK 1.01 NL 1.07 NY 0.85 ON 1.37 ! OV 1.19 PT 1.06 SC 1.13 TC 1.00* ! TS 1.03 WF 0.91 WZ 0.98 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 0.96 GC 1.11 GG 1.00* ! HN 1.00 KP 0.95 LA 0.87 MA 1.11 ! MK 1.05 NL 0.99 NY 0.89 ON 1.30 ! OV 0.66 PT 1.01 SC 1.09 TC 1.00* ! TS 1.09 WF 0.90 WZ 1.01 ! ! A total of 30 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.04 GC 1.11 GG 1.00* ! HN 1.01 KP 1.02 LA 0.94 MA 1.06 ! MK 0.93 NL 1.10 NY 0.87 ON 1.31 ! OV 1.10 PT 1.10 SC 1.00* TC 1.00* ! TS 1.05 WF 0.93 WZ 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.33 FD 1.01 GC 1.14 GG 1.00* ! HN 1.00 KP 0.99 LA 0.91 MA 1.00* ! MK 1.01 NL 1.08 NY 0.91 ON 1.00* ! OV 1.25 PT 1.07 SC 1.36 TC 1.00* ! TS 1.04 WF 0.91 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.91 GC 1.18 GG 1.00* ! HN 1.04 KP 0.97 LA 0.73 MA 0.83 ! MK 0.96 NL 1.00 NY 0.80 ON 1.29 ! OV 1.06 PT 1.02 SC 1.10 TC 1.00* ! TS 1.02 WF 0.87 WZ 0.91 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.85 GC 1.16 GG 1.00* ! HN 1.05 KP 0.95 LA 0.71 MA 2.16 ! MK 1.01 NL 0.93 NY 0.84 ON 1.25 ! OV 0.96 PT 0.97 SC 1.07 TC 1.00* ! TS 1.08 WF 0.86 WZ 0.98 ! ! A total of 30 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.74 FD 0.92 GC 1.07 GG 1.00* ! HN 0.94 KP 1.05 LA 0.77 MA 1.01 ! MK 0.75 NL 1.04 NY 0.82 ON 1.26 ! OV 1.07 PT 1.04 SC 1.00* TC 1.00* ! TS 0.97 WF 0.89 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.69 FD 0.91 GC 1.16 GG 1.00* ! HN 0.90 KP 0.97 LA 0.73 MA 1.00* ! MK 0.96 NL 1.02 NY 0.83 ON 1.00* ! OV 1.27 PT 1.03 SC 1.29 TC 1.00* ! TS 1.02 WF 0.87 WZ 1.00* ! ! ! Fit before self-cal, rms=0.497072Jy sigma=0.002839 ! Fit after self-cal, rms=0.384459Jy sigma=0.001971 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=2.81 mas, bpa=-73.96 degrees ! Estimated noise=413.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-32, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202673 Jy ! Component: 100 - total flux cleaned = 0.0340412 Jy ! Component: 150 - total flux cleaned = 0.0444584 Jy ! Component: 200 - total flux cleaned = 0.0521954 Jy ! Total flux subtracted in 200 components = 0.0521954 Jy ! Clean residual min=-0.010472 max=0.015315 Jy/beam ! Clean residual mean=0.001055 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 2.0224 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 137 components and 2.0224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383169Jy sigma=0.001957 ! Fit after self-cal, rms=0.383394Jy sigma=0.001955 ! Inverting map ! Added new window around map position (-9, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167302 Jy ! Component: 100 - total flux cleaned = 0.0230544 Jy ! Component: 150 - total flux cleaned = 0.0261799 Jy ! Component: 200 - total flux cleaned = 0.0288589 Jy ! Total flux subtracted in 200 components = 0.0288589 Jy ! Clean residual min=-0.010903 max=0.010588 Jy/beam ! Clean residual mean=0.000873 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 2.05126 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 164 components and 2.05126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382544Jy sigma=0.001947 ! Fit after self-cal, rms=0.382430Jy sigma=0.001946 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382430Jy sigma=0.001946 ! Fit after self-cal, rms=0.361835Jy sigma=0.001751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=2.809 mas, bpa=-75.36 degrees ! Estimated noise=414.624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897602 Jy ! Component: 100 - total flux cleaned = 0.0127066 Jy ! Component: 150 - total flux cleaned = 0.0160304 Jy ! Component: 200 - total flux cleaned = 0.0180993 Jy ! Total flux subtracted in 200 components = 0.0180993 Jy ! Clean residual min=-0.006548 max=0.008713 Jy/beam ! Clean residual mean=0.000613 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 2.06936 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 181 components and 2.06936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361365Jy sigma=0.001747 ! Fit after self-cal, rms=0.361325Jy sigma=0.001747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-42.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897504 Jy ! Component: 100 - total flux cleaned = 0.0143798 Jy ! Component: 150 - total flux cleaned = 0.0169546 Jy ! Component: 200 - total flux cleaned = 0.0187373 Jy ! Total flux subtracted in 200 components = 0.0187373 Jy ! Clean residual min=-0.006111 max=0.007842 Jy/beam ! Clean residual mean=0.000470 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 2.08809 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 203 components and 2.08809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360992Jy sigma=0.001745 ! Fit after self-cal, rms=0.360949Jy sigma=0.001744 ! Inverting map ! Added new window around map position (-32, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797326 Jy ! Component: 100 - total flux cleaned = 0.0107747 Jy ! Component: 150 - total flux cleaned = 0.0121365 Jy ! Component: 200 - total flux cleaned = 0.0133698 Jy ! Total flux subtracted in 200 components = 0.0133698 Jy ! Clean residual min=-0.006071 max=0.006171 Jy/beam ! Clean residual mean=0.000387 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 2.10146 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 227 components and 2.10146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360739Jy sigma=0.001742 ! Fit after self-cal, rms=0.360716Jy sigma=0.001742 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360716Jy sigma=0.001742 ! Fit after self-cal, rms=0.359090Jy sigma=0.001706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=2.81 mas, bpa=-75.05 degrees ! Estimated noise=415.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563547 Jy ! Component: 100 - total flux cleaned = 0.0091656 Jy ! Component: 150 - total flux cleaned = 0.0120464 Jy ! Component: 200 - total flux cleaned = 0.0137104 Jy ! Total flux subtracted in 200 components = 0.0137104 Jy ! Clean residual min=-0.004883 max=0.005325 Jy/beam ! Clean residual mean=0.000309 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 2.11517 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 247 components and 2.11518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358904Jy sigma=0.001704 ! Fit after self-cal, rms=0.358878Jy sigma=0.001704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216406 Jy ! Component: 100 - total flux cleaned = 0.0032662 Jy ! Component: 150 - total flux cleaned = 0.00416576 Jy ! Component: 200 - total flux cleaned = 0.00465072 Jy ! Total flux subtracted in 200 components = 0.00465072 Jy ! Clean residual min=-0.004769 max=0.005255 Jy/beam ! Clean residual mean=0.000277 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 2.11983 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 255 components and 2.11983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358791Jy sigma=0.001704 ! Fit after self-cal, rms=0.358782Jy sigma=0.001704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358782Jy sigma=0.001704 ! Fit after self-cal, rms=0.359293Jy sigma=0.001703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=10.02 mas, bpa=13.79 degrees ! Estimated noise=592.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817952 Jy ! Component: 100 - total flux cleaned = 0.0122846 Jy ! Component: 150 - total flux cleaned = 0.0142985 Jy ! Component: 200 - total flux cleaned = 0.0160067 Jy ! Total flux subtracted in 200 components = 0.0160067 Jy ! Clean residual min=-0.005843 max=0.008100 Jy/beam ! Clean residual mean=0.000611 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 2.13583 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 271 components and 2.13583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359209Jy sigma=0.001703 ! Fit after self-cal, rms=0.359186Jy sigma=0.001703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281645 Jy ! Component: 100 - total flux cleaned = 0.00403989 Jy ! Component: 150 - total flux cleaned = 0.00499911 Jy ! Component: 200 - total flux cleaned = 0.0057576 Jy ! Total flux subtracted in 200 components = 0.0057576 Jy ! Clean residual min=-0.006045 max=0.007754 Jy/beam ! Clean residual mean=0.000494 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 2.14159 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 282 components and 2.14159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359191Jy sigma=0.001703 ! Fit after self-cal, rms=0.359186Jy sigma=0.001703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=2.81 mas, bpa=-75.01 degrees ! Estimated noise=415.913 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.654 x 2.81 at -75.01 degrees (North through East) ! Clean map min=-0.0042758 max=1.4103 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359186Jy sigma=0.001703 ! Fit after self-cal, rms=0.328155Jy sigma=0.001399 ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=2.81 mas, bpa=-75.85 degrees ! Estimated noise=415.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00451506 Jy ! Component: 100 - total flux cleaned = -0.00546589 Jy ! Component: 150 - total flux cleaned = -0.00558917 Jy ! Component: 200 - total flux cleaned = -0.00570143 Jy ! Total flux subtracted in 200 components = -0.00570143 Jy ! Clean residual min=-0.004431 max=0.004099 Jy/beam ! Clean residual mean=0.000194 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 2.13589 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 300 components and 2.13589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328046Jy sigma=0.001397 ! Fit after self-cal, rms=0.328047Jy sigma=0.001397 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000591565 Jy ! Component: 100 - total flux cleaned = -0.000591671 Jy ! Component: 150 - total flux cleaned = -0.000591483 Jy ! Component: 200 - total flux cleaned = -0.000592416 Jy ! Total flux subtracted in 200 components = -0.000592416 Jy ! Clean residual min=-0.004260 max=0.004072 Jy/beam ! Clean residual mean=0.000198 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 2.1353 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 305 components and 2.1353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327988Jy sigma=0.001397 ! Fit after self-cal, rms=0.327986Jy sigma=0.001397 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327986Jy sigma=0.001397 ! Fit after self-cal, rms=0.328428Jy sigma=0.001397 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.946 mas, bmaj=2.133 mas, bpa=-80.5 degrees ! Estimated noise=941.077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.998662 Jy ! Component: 100 - total flux cleaned = 1.32416 Jy ! Component: 150 - total flux cleaned = 1.48354 Jy ! Component: 200 - total flux cleaned = 1.56669 Jy ! Total flux subtracted in 200 components = 1.56669 Jy ! Clean residual min=-0.013219 max=0.044647 Jy/beam ! Clean residual mean=0.000075 rms=0.003518 Jy/beam ! Combined flux in latest and established models = 1.56669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.56669 Jy ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=2.812 mas, bpa=-75.76 degrees ! Estimated noise=415.264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129211 Jy ! Component: 100 - total flux cleaned = 0.208694 Jy ! Component: 150 - total flux cleaned = 0.263979 Jy ! Component: 200 - total flux cleaned = 0.306541 Jy ! Total flux subtracted in 200 components = 0.306541 Jy ! Clean residual min=-0.008087 max=0.025365 Jy/beam ! Clean residual mean=0.001944 rms=0.005338 Jy/beam ! Combined flux in latest and established models = 1.87323 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 99 components and 1.87323 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342274 Jy ! Component: 100 - total flux cleaned = 0.062375 Jy ! Component: 150 - total flux cleaned = 0.0860087 Jy ! Component: 200 - total flux cleaned = 0.106105 Jy ! Total flux subtracted in 200 components = 0.106105 Jy ! Clean residual min=-0.006377 max=0.013997 Jy/beam ! Clean residual mean=0.001247 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 1.97934 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 173 components and 1.97934 Jy ! Inverting map ! Added new window around map position (-26, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175359 Jy ! Component: 100 - total flux cleaned = 0.032737 Jy ! Component: 150 - total flux cleaned = 0.0461621 Jy ! Component: 200 - total flux cleaned = 0.0580539 Jy ! Total flux subtracted in 200 components = 0.0580539 Jy ! Clean residual min=-0.005202 max=0.009530 Jy/beam ! Clean residual mean=0.000852 rms=0.002161 Jy/beam ! Combined flux in latest and established models = 2.03739 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 232 components and 2.03739 Jy ! Inverting map ! Added new window around map position (-23.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110779 Jy ! Component: 100 - total flux cleaned = 0.0206253 Jy ! Component: 150 - total flux cleaned = 0.0291229 Jy ! Component: 200 - total flux cleaned = 0.0367041 Jy ! Total flux subtracted in 200 components = 0.0367041 Jy ! Clean residual min=-0.004362 max=0.006869 Jy/beam ! Clean residual mean=0.000606 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 2.07409 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 285 components and 2.07409 Jy ! Inverting map ! Added new window around map position (-15, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735608 Jy ! Component: 100 - total flux cleaned = 0.0135159 Jy ! Component: 150 - total flux cleaned = 0.019011 Jy ! Component: 200 - total flux cleaned = 0.0239406 Jy ! Total flux subtracted in 200 components = 0.0239406 Jy ! Clean residual min=-0.003858 max=0.005388 Jy/beam ! Clean residual mean=0.000447 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 2.09803 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 314 components and 2.09803 Jy ! Inverting map ! Added new window around map position (-39.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581994 Jy ! Component: 100 - total flux cleaned = 0.0100123 Jy ! Component: 150 - total flux cleaned = 0.0137182 Jy ! Component: 200 - total flux cleaned = 0.0166511 Jy ! Total flux subtracted in 200 components = 0.0166511 Jy ! Clean residual min=-0.003507 max=0.004244 Jy/beam ! Clean residual mean=0.000336 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 2.11468 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 348 components and 2.11468 Jy ! Inverting map ! Added new window around map position (-35.5, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414979 Jy ! Component: 100 - total flux cleaned = 0.00623373 Jy ! Component: 150 - total flux cleaned = 0.00793706 Jy ! Component: 200 - total flux cleaned = 0.00974947 Jy ! Total flux subtracted in 200 components = 0.00974947 Jy ! Clean residual min=-0.003274 max=0.003587 Jy/beam ! Clean residual mean=0.000268 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 2.12443 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 367 components and 2.12443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.959 mas, bmaj=10.01 mas, bpa=13.81 degrees ! Estimated noise=590.574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063153 Jy ! Component: 100 - total flux cleaned = 0.0110587 Jy ! Component: 150 - total flux cleaned = 0.0147736 Jy ! Component: 200 - total flux cleaned = 0.0177148 Jy ! Total flux subtracted in 200 components = 0.0177148 Jy ! Clean residual min=-0.003562 max=0.003901 Jy/beam ! Clean residual mean=0.000432 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 2.14215 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235229 Jy ! Component: 100 - total flux cleaned = 0.00423974 Jy ! Component: 150 - total flux cleaned = 0.00575521 Jy ! Component: 200 - total flux cleaned = 0.00697215 Jy ! Total flux subtracted in 200 components = 0.00697215 Jy ! Clean residual min=-0.003399 max=0.003870 Jy/beam ! Clean residual mean=0.000278 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 2.14912 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 416 components and 2.14912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=2.812 mas, bpa=-75.76 degrees ! Estimated noise=415.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025729 Jy ! Component: 100 - total flux cleaned = -0.00258544 Jy ! Component: 150 - total flux cleaned = -0.00286986 Jy ! Component: 200 - total flux cleaned = -0.00293161 Jy ! Total flux subtracted in 200 components = -0.00293161 Jy ! Clean residual min=-0.003082 max=0.003057 Jy/beam ! Clean residual mean=0.000121 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 2.14619 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 420 components and 2.14619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327905Jy sigma=0.001392 ! Fit after self-cal, rms=0.327837Jy sigma=0.001391 wmodel J1800+7828_S_2003_07_09_pus_map.mod ! Writing 420 model components to file: J1800+7828_S_2003_07_09_pus_map.mod wobs J1800+7828_S_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J1800+7828_S_2003_07_09_pus_uvs.fits wwins J1800+7828_S_2003_07_09_pus_map.win ! wwins: Wrote 12 windows to J1800+7828_S_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346429 Jy ! Component: 100 - total flux cleaned = -0.00024156 Jy ! Component: 150 - total flux cleaned = 5.39602e-05 Jy ! Component: 200 - total flux cleaned = 0.000292306 Jy ! Component: 250 - total flux cleaned = 0.000570072 Jy ! Component: 300 - total flux cleaned = 0.00084054 Jy ! Component: 350 - total flux cleaned = 0.00106181 Jy ! Component: 400 - total flux cleaned = 0.0014083 Jy ! Component: 450 - total flux cleaned = 0.00162088 Jy ! Component: 500 - total flux cleaned = 0.00191316 Jy ! Component: 550 - total flux cleaned = 0.00207775 Jy ! Component: 600 - total flux cleaned = 0.00232083 Jy ! Component: 650 - total flux cleaned = 0.00252048 Jy ! Component: 700 - total flux cleaned = 0.00279564 Jy ! Component: 750 - total flux cleaned = 0.00298956 Jy ! Component: 800 - total flux cleaned = 0.00325778 Jy ! Component: 850 - total flux cleaned = 0.00348478 Jy ! Component: 900 - total flux cleaned = 0.00370982 Jy ! Component: 950 - total flux cleaned = 0.00411771 Jy ! Component: 1000 - total flux cleaned = 0.00441094 Jy ! Component: 1050 - total flux cleaned = 0.00466483 Jy ! Component: 1100 - total flux cleaned = 0.0049879 Jy ! Component: 1150 - total flux cleaned = 0.00513003 Jy ! Component: 1200 - total flux cleaned = 0.00541207 Jy ! Component: 1250 - total flux cleaned = 0.00565708 Jy ! Component: 1300 - total flux cleaned = 0.00589979 Jy ! Component: 1350 - total flux cleaned = 0.00617496 Jy ! Component: 1400 - total flux cleaned = 0.00641386 Jy ! Component: 1450 - total flux cleaned = 0.00671854 Jy ! Component: 1500 - total flux cleaned = 0.00692024 Jy ! Component: 1550 - total flux cleaned = 0.00718738 Jy ! Component: 1600 - total flux cleaned = 0.0074526 Jy ! Component: 1650 - total flux cleaned = 0.00761715 Jy ! Component: 1700 - total flux cleaned = 0.00784591 Jy ! Component: 1750 - total flux cleaned = 0.00807336 Jy ! Component: 1800 - total flux cleaned = 0.00826702 Jy ! Component: 1850 - total flux cleaned = 0.00849161 Jy ! Component: 1900 - total flux cleaned = 0.00865104 Jy ! Component: 1950 - total flux cleaned = 0.00880958 Jy ! Component: 2000 - total flux cleaned = 0.00893591 Jy ! Total flux subtracted in 2048 components = 0.00915534 Jy ! Clean residual min=-0.001879 max=0.002007 Jy/beam ! Clean residual mean=0.000045 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 2.15534 Jy keep ! Adding 177 model components to the UV plane model. ! The established model now contains 597 components and 2.15534 Jy ![Exited script file: muppet] wmap "J1800+7828_S_2003_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.656 x 2.812 at -75.76 degrees (North through East) ! Clean map min=-0.0025904 max=1.4108 Jy/beam ! Writing clean map to FITS file: J1800+7828_S_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.41078 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000591767 device "J1800+7828_S_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1800+7828_S_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125838 0.125838 0.251676 0.503352 1.0067 2.01341 4.02682 8.05364 16.1073 32.2146 64.4291 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.41 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.656 x 2.812 at -75.76 degrees (North through East) ! Clean map min=-0.0025904 max=1.4108 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1800+7828_S_2003_07_09_pus_uvs.log closed on Mon Apr 8 12:02:36 2013