! Started logfile: J1640+3946_S_2003_07_09_pus_uvs.log on Mon Apr 8 11:37:30 2013 obs J1640+3946_S_2003_07_09_pus_uva.fits ! Reading UV FITS file: J1640+3946_S_2003_07_09_pus_uva.fits ! AN table 1: 142 integrations on 171 of 171 possible baselines. ! AN table 2: 89 integrations on 171 of 171 possible baselines. ! AN table 3: 105 integrations on 171 of 171 possible baselines. ! AN table 4: 13 integrations on 171 of 171 possible baselines. ! AN table 5: 99 integrations on 171 of 171 possible baselines. ! AN table 6: 18 integrations on 171 of 171 possible baselines. ! AN table 7: 11 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.110535 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1640+3946 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1520 lines of history. ! ! Reading 36064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1640+3946_S_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1823 telescope corrections were flagged in sub-array 1. ! A total of 1493 telescope corrections were flagged in sub-array 2. ! A total of 1442 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 1454 telescope corrections were flagged in sub-array 5. ! A total of 282 telescope corrections were flagged in sub-array 6. ! A total of 209 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 1823 telescope corrections were flagged in sub-array 1. ! A total of 1491 telescope corrections were flagged in sub-array 2. ! A total of 1519 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 1453 telescope corrections were flagged in sub-array 5. ! A total of 282 telescope corrections were flagged in sub-array 6. ! A total of 209 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 1860 telescope corrections were flagged in sub-array 1. ! A total of 1493 telescope corrections were flagged in sub-array 2. ! A total of 1425 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 1453 telescope corrections were flagged in sub-array 5. ! A total of 282 telescope corrections were flagged in sub-array 6. ! A total of 209 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 1860 telescope corrections were flagged in sub-array 1. ! A total of 1494 telescope corrections were flagged in sub-array 2. ! A total of 1436 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 1459 telescope corrections were flagged in sub-array 5. ! A total of 282 telescope corrections were flagged in sub-array 6. ! A total of 209 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.844488Jy sigma=0.006828 ! Fit after self-cal, rms=0.372307Jy sigma=0.002445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=2.864 mas, bpa=10.38 degrees ! Estimated noise=971.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.652956 Jy ! Component: 100 - total flux cleaned = 0.800258 Jy ! Total flux subtracted in 100 components = 0.800258 Jy ! Clean residual min=-0.026125 max=0.055000 Jy/beam ! Clean residual mean=-0.000057 rms=0.007103 Jy/beam ! Combined flux in latest and established models = 0.800259 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.800259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355271Jy sigma=0.002365 ! Fit after self-cal, rms=0.355251Jy sigma=0.002365 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660755 Jy ! Component: 100 - total flux cleaned = 0.107773 Jy ! Total flux subtracted in 100 components = 0.107773 Jy ! Clean residual min=-0.023276 max=0.024360 Jy/beam ! Clean residual mean=-0.000107 rms=0.005928 Jy/beam ! Combined flux in latest and established models = 0.908032 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.908032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340288Jy sigma=0.002150 ! Fit after self-cal, rms=0.340262Jy sigma=0.002150 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=3.378 mas, bpa=12.83 degrees ! Estimated noise=511.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381338 Jy ! Component: 100 - total flux cleaned = 0.0569492 Jy ! Component: 150 - total flux cleaned = 0.0670485 Jy ! Component: 200 - total flux cleaned = 0.0712423 Jy ! Total flux subtracted in 200 components = 0.0712423 Jy ! Clean residual min=-0.015612 max=0.019889 Jy/beam ! Clean residual mean=0.000079 rms=0.004262 Jy/beam ! Combined flux in latest and established models = 0.979274 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 0.979274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337636Jy sigma=0.002095 ! Fit after self-cal, rms=0.337629Jy sigma=0.002095 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 GC 0.99 GG 1.00* ! HN 0.77 KP 0.88 LA 1.20 MA 1.00* ! MK 1.06 NL 0.94 NY 1.11 ON 1.23 ! OV 0.96 PT 1.03 SC 1.00* TC 1.00* ! TS 1.08 WF 1.00* WZ 1.19 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00* GC 1.06 GG 1.00* ! HN 1.00* KP 0.74 LA 1.30 MA 1.00* ! MK 0.96 NL 1.00* NY 1.08 ON 1.00* ! OV 2.45 PT 1.11 SC 1.00* TC 1.00* ! TS 1.05 WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.22 GC 1.11 GG 1.00* ! HN 0.91 KP 1.00* LA 1.19 MA 0.57 ! MK 1.00* NL 0.98 NY 1.15 ON 1.22 ! OV 1.00* PT 1.08 SC 0.87 TC 1.00* ! TS 1.00* WF 0.69 WZ 1.02 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.00* GC 1.08 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.34 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! A total of 45 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.17 GC 1.07 GG 1.00* ! HN 0.95 KP 0.89 LA 1.16 MA 1.00* ! MK 1.00* NL 0.98 NY 1.20 ON 1.30 ! OV 1.13 PT 1.03 SC 0.89 TC 1.00* ! TS 1.00* WF 0.90 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.02 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 0.94 NY 1.06 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.91 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 GC 0.89 GG 1.00* ! HN 0.91 KP 0.98 LA 1.13 MA 1.00* ! MK 1.05 NL 0.97 NY 0.88 ON 1.03 ! OV 1.04 PT 1.00 SC 1.00* TC 1.00* ! TS 1.09 WF 1.00* WZ 1.20 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.00* GC 0.92 GG 1.00* ! HN 1.00* KP 0.75 LA 1.24 MA 1.00* ! MK 1.03 NL 1.00* NY 0.84 ON 1.00* ! OV 1.23 PT 1.12 SC 1.00* TC 1.00* ! TS 1.06 WF 1.00* WZ 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.12 GC 1.01 GG 1.00* ! HN 1.01 KP 1.00* LA 1.16 MA 1.00* ! MK 1.00* NL 1.02 NY 0.89 ON 1.00 ! OV 1.00* PT 1.07 SC 0.88 TC 1.00* ! TS 1.00* WF 0.93 WZ 1.02 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.29 FD 1.00* GC 0.90 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 0.92 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.07 FD 1.08 GC 0.98 GG 1.00* ! HN 0.99 KP 0.99 LA 1.09 MA 1.00* ! MK 1.00* NL 1.03 NY 0.89 ON 1.01 ! OV 1.11 PT 1.01 SC 0.93 TC 1.00* ! TS 1.00* WF 0.87 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.99 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.05 NY 0.85 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.94 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 GC 1.10 GG 1.00* ! HN 0.92 KP 0.97 LA 0.92 MA 1.00* ! MK 0.99 NL 1.01 NY 0.85 ON 1.28 ! OV 1.02 PT 1.05 SC 1.00* TC 1.00* ! TS 1.11 WF 1.00* WZ 1.00* ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.82 FD 1.00* GC 1.22 GG 1.00* ! HN 1.00* KP 0.84 LA 1.01 MA 1.00* ! MK 0.99 NL 1.00* NY 0.85 ON 1.00* ! OV 3.73 PT 1.12 SC 1.00* TC 1.00* ! TS 1.06 WF 1.00* WZ 1.00* ! ! A total of 87 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.62 FD 1.07 GC 1.21 GG 1.00* ! HN 1.01 KP 1.00* LA 0.95 MA 1.00 ! MK 1.00* NL 1.06 NY 0.87 ON 1.33 ! OV 1.00* PT 1.10 SC 1.05 TC 1.00* ! TS 1.00* WF 0.91 WZ 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.76 FD 1.00* GC 1.19 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 0.93 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.03 GC 1.20 GG 1.00* ! HN 1.06 KP 0.97 LA 0.91 MA 1.00* ! MK 1.00* NL 1.07 NY 0.93 ON 1.43 ! OV 1.16 PT 1.06 SC 1.04 TC 1.00* ! TS 1.00* WF 0.85 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.03 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.18 NY 0.81 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.94 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 GC 1.13 GG 1.00* ! HN 0.64 KP 0.98 LA 0.74 MA 1.00* ! MK 0.95 NL 0.94 NY 0.79 ON 1.25 ! OV 0.88 PT 1.01 SC 1.00* TC 1.00* ! TS 1.09 WF 1.00* WZ 1.00* ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 1.00* GC 1.26 GG 1.00* ! HN 1.00* KP 0.74 LA 0.81 MA 1.00* ! MK 0.95 NL 1.00* NY 0.81 ON 1.00* ! OV 3.19 PT 1.07 SC 1.00* TC 1.00* ! TS 1.05 WF 1.00* WZ 1.00* ! ! A total of 75 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.56 FD 0.96 GC 1.16 GG 1.00* ! HN 0.93 KP 1.00* LA 0.80 MA 0.78 ! MK 1.00* NL 0.99 NY 0.83 ON 1.21 ! OV 1.00* PT 1.05 SC 0.96 TC 1.00* ! TS 1.00* WF 0.92 WZ 0.98 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 1.00* GC 1.33 GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 0.83 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.95 WF 1.00* WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.93 GC 1.19 GG 1.00* ! HN 0.95 KP 0.98 LA 0.74 MA 1.00* ! MK 1.00* NL 0.99 NY 0.81 ON 1.20 ! OV 1.02 PT 1.01 SC 1.04 TC 1.00* ! TS 1.00* WF 0.88 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.96 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 0.96 NY 0.73 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.92 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.337629Jy sigma=0.002095 ! Fit after self-cal, rms=0.269003Jy sigma=0.001499 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=3.422 mas, bpa=12.41 degrees ! Estimated noise=513.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00405598 Jy ! Component: 100 - total flux cleaned = -0.00442481 Jy ! Component: 150 - total flux cleaned = -0.00467501 Jy ! Component: 200 - total flux cleaned = -0.00467863 Jy ! Total flux subtracted in 200 components = -0.00467863 Jy ! Clean residual min=-0.003641 max=0.004750 Jy/beam ! Clean residual mean=0.000237 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.974595 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.974595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268688Jy sigma=0.001497 ! Fit after self-cal, rms=0.269276Jy sigma=0.001495 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269276Jy sigma=0.001495 ! Fit after self-cal, rms=0.268780Jy sigma=0.001487 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=3.424 mas, bpa=11.75 degrees ! Estimated noise=513.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297959 Jy ! Component: 100 - total flux cleaned = -0.00341513 Jy ! Component: 150 - total flux cleaned = -0.00341873 Jy ! Component: 200 - total flux cleaned = -0.00350022 Jy ! Total flux subtracted in 200 components = -0.00350022 Jy ! Clean residual min=-0.003404 max=0.004441 Jy/beam ! Clean residual mean=0.000243 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.971095 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.971095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268663Jy sigma=0.001486 ! Fit after self-cal, rms=0.268677Jy sigma=0.001486 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444483 Jy ! Component: 100 - total flux cleaned = 0.00568775 Jy ! Component: 150 - total flux cleaned = 0.0057778 Jy ! Component: 200 - total flux cleaned = 0.00585564 Jy ! Total flux subtracted in 200 components = 0.00585564 Jy ! Clean residual min=-0.003431 max=0.003884 Jy/beam ! Clean residual mean=0.000195 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.976951 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.976951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268575Jy sigma=0.001485 ! Fit after self-cal, rms=0.268568Jy sigma=0.001485 ! Inverting map ! Added new window around map position (20.5, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337043 Jy ! Component: 100 - total flux cleaned = 0.00366977 Jy ! Component: 150 - total flux cleaned = 0.0040057 Jy ! Component: 200 - total flux cleaned = 0.00408281 Jy ! Total flux subtracted in 200 components = 0.00408281 Jy ! Clean residual min=-0.003584 max=0.003665 Jy/beam ! Clean residual mean=0.000165 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.981033 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.981034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268475Jy sigma=0.001484 ! Fit after self-cal, rms=0.268472Jy sigma=0.001484 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268472Jy sigma=0.001484 ! Fit after self-cal, rms=0.269314Jy sigma=0.001483 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=3.427 mas, bpa=11.47 degrees ! Estimated noise=512.966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115461 Jy ! Component: 100 - total flux cleaned = -0.000914353 Jy ! Component: 150 - total flux cleaned = -0.000839211 Jy ! Component: 200 - total flux cleaned = -0.000771839 Jy ! Total flux subtracted in 200 components = -0.000771839 Jy ! Clean residual min=-0.003450 max=0.003909 Jy/beam ! Clean residual mean=0.000157 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.980262 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.980262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269239Jy sigma=0.001482 ! Fit after self-cal, rms=0.269269Jy sigma=0.001482 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184995 Jy ! Component: 100 - total flux cleaned = 0.00252538 Jy ! Component: 150 - total flux cleaned = 0.00258888 Jy ! Component: 200 - total flux cleaned = 0.00253041 Jy ! Total flux subtracted in 200 components = 0.00253041 Jy ! Clean residual min=-0.003360 max=0.003673 Jy/beam ! Clean residual mean=0.000137 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.982792 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.982792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269200Jy sigma=0.001482 ! Fit after self-cal, rms=0.269197Jy sigma=0.001482 ! Inverting map ! Added new window around map position (-5, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313968 Jy ! Component: 100 - total flux cleaned = 0.00365657 Jy ! Component: 150 - total flux cleaned = 0.00372797 Jy ! Component: 200 - total flux cleaned = 0.00366168 Jy ! Total flux subtracted in 200 components = 0.00366168 Jy ! Clean residual min=-0.003400 max=0.003474 Jy/beam ! Clean residual mean=0.000110 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.986454 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.986454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269115Jy sigma=0.001481 ! Fit after self-cal, rms=0.269113Jy sigma=0.001481 ! Inverting map ! Added new window around map position (34, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258227 Jy ! Component: 100 - total flux cleaned = 0.0029607 Jy ! Component: 150 - total flux cleaned = 0.00309472 Jy ! Component: 200 - total flux cleaned = 0.00315701 Jy ! Total flux subtracted in 200 components = 0.00315701 Jy ! Clean residual min=-0.003315 max=0.003161 Jy/beam ! Clean residual mean=0.000088 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.989611 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 125 components and 0.989611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269050Jy sigma=0.001481 ! Fit after self-cal, rms=0.269047Jy sigma=0.001481 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269047Jy sigma=0.001481 ! Fit after self-cal, rms=0.269258Jy sigma=0.001480 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=9.091 mas, bpa=-36.95 degrees ! Estimated noise=686.063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177175 Jy ! Component: 100 - total flux cleaned = 0.0026514 Jy ! Component: 150 - total flux cleaned = 0.00339313 Jy ! Component: 200 - total flux cleaned = 0.00388331 Jy ! Total flux subtracted in 200 components = 0.00388331 Jy ! Clean residual min=-0.002780 max=0.002475 Jy/beam ! Clean residual mean=0.000129 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.993494 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.993494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269243Jy sigma=0.001480 ! Fit after self-cal, rms=0.269250Jy sigma=0.001480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537358 Jy ! Component: 100 - total flux cleaned = 0.000712598 Jy ! Component: 150 - total flux cleaned = 0.000907404 Jy ! Component: 200 - total flux cleaned = 0.00101257 Jy ! Total flux subtracted in 200 components = 0.00101257 Jy ! Clean residual min=-0.002711 max=0.002435 Jy/beam ! Clean residual mean=0.000110 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.994507 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 0.994507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269241Jy sigma=0.001480 ! Fit after self-cal, rms=0.269240Jy sigma=0.001480 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=3.429 mas, bpa=11.24 degrees ! Estimated noise=512.874 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 3.429 at 11.24 degrees (North through East) ! Clean map min=-0.0028626 max=0.86151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269240Jy sigma=0.001480 ! Fit after self-cal, rms=0.263857Jy sigma=0.001330 ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=3.429 mas, bpa=11.11 degrees ! Estimated noise=512.488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225887 Jy ! Component: 100 - total flux cleaned = -0.00254559 Jy ! Component: 150 - total flux cleaned = -0.00254467 Jy ! Component: 200 - total flux cleaned = -0.00260074 Jy ! Total flux subtracted in 200 components = -0.00260074 Jy ! Clean residual min=-0.002645 max=0.002534 Jy/beam ! Clean residual mean=-0.000010 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.991906 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 170 components and 0.991906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263801Jy sigma=0.001329 ! Fit after self-cal, rms=0.263802Jy sigma=0.001329 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07691e-06 Jy ! Component: 100 - total flux cleaned = -0.000162325 Jy ! Component: 150 - total flux cleaned = -0.00021409 Jy ! Component: 200 - total flux cleaned = -0.000312441 Jy ! Total flux subtracted in 200 components = -0.000312441 Jy ! Clean residual min=-0.002562 max=0.002504 Jy/beam ! Clean residual mean=-0.000007 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.991593 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 179 components and 0.991593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263774Jy sigma=0.001329 ! Fit after self-cal, rms=0.263773Jy sigma=0.001329 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263773Jy sigma=0.001329 ! Fit after self-cal, rms=0.263972Jy sigma=0.001329 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=2.94 mas, bpa=9.532 degrees ! Estimated noise=991.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.659464 Jy ! Component: 100 - total flux cleaned = 0.805191 Jy ! Component: 150 - total flux cleaned = 0.861283 Jy ! Component: 200 - total flux cleaned = 0.895243 Jy ! Total flux subtracted in 200 components = 0.895243 Jy ! Clean residual min=-0.006449 max=0.017592 Jy/beam ! Clean residual mean=0.000035 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.895242 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.895242 Jy ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=3.431 mas, bpa=11.03 degrees ! Estimated noise=512.278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305083 Jy ! Component: 100 - total flux cleaned = 0.047108 Jy ! Component: 150 - total flux cleaned = 0.0574584 Jy ! Component: 200 - total flux cleaned = 0.0647364 Jy ! Total flux subtracted in 200 components = 0.0647364 Jy ! Clean residual min=-0.003341 max=0.005216 Jy/beam ! Clean residual mean=0.000212 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.959979 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.959979 Jy ! Inverting map ! Added new window around map position (-1.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584203 Jy ! Component: 100 - total flux cleaned = 0.010512 Jy ! Component: 150 - total flux cleaned = 0.0144392 Jy ! Component: 200 - total flux cleaned = 0.0176712 Jy ! Total flux subtracted in 200 components = 0.0176712 Jy ! Clean residual min=-0.002896 max=0.003178 Jy/beam ! Clean residual mean=0.000080 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.97765 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 88 components and 0.97765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.511 mas, bmaj=9.097 mas, bpa=-36.87 degrees ! Estimated noise=683.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468112 Jy ! Component: 100 - total flux cleaned = 0.00745985 Jy ! Component: 150 - total flux cleaned = 0.008699 Jy ! Component: 200 - total flux cleaned = 0.00970815 Jy ! Total flux subtracted in 200 components = 0.00970815 Jy ! Clean residual min=-0.002867 max=0.002613 Jy/beam ! Clean residual mean=0.000025 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.987358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828182 Jy ! Component: 100 - total flux cleaned = 0.00142799 Jy ! Component: 150 - total flux cleaned = 0.00182308 Jy ! Component: 200 - total flux cleaned = 0.00206066 Jy ! Total flux subtracted in 200 components = 0.00206066 Jy ! Clean residual min=-0.002834 max=0.002158 Jy/beam ! Clean residual mean=-0.000018 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.989419 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 152 components and 0.989419 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=3.431 mas, bpa=11.03 degrees ! Estimated noise=512.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147659 Jy ! Component: 100 - total flux cleaned = -0.00147991 Jy ! Component: 150 - total flux cleaned = -0.00140851 Jy ! Component: 200 - total flux cleaned = -0.00134349 Jy ! Total flux subtracted in 200 components = -0.00134349 Jy ! Clean residual min=-0.002479 max=0.002695 Jy/beam ! Clean residual mean=0.000004 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.988075 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 175 components and 0.988075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263992Jy sigma=0.001329 ! Fit after self-cal, rms=0.263991Jy sigma=0.001329 wmodel J1640+3946_S_2003_07_09_pus_map.mod ! Writing 175 model components to file: J1640+3946_S_2003_07_09_pus_map.mod wobs J1640+3946_S_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J1640+3946_S_2003_07_09_pus_uvs.fits wwins J1640+3946_S_2003_07_09_pus_map.win ! wwins: Wrote 7 windows to J1640+3946_S_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391615 Jy ! Component: 100 - total flux cleaned = 0.000868098 Jy ! Component: 150 - total flux cleaned = 0.0012431 Jy ! Component: 200 - total flux cleaned = 0.00156607 Jy ! Component: 250 - total flux cleaned = 0.00172333 Jy ! Component: 300 - total flux cleaned = 0.00187719 Jy ! Component: 350 - total flux cleaned = 0.00202796 Jy ! Component: 400 - total flux cleaned = 0.00217622 Jy ! Component: 450 - total flux cleaned = 0.00232239 Jy ! Component: 500 - total flux cleaned = 0.00239498 Jy ! Component: 550 - total flux cleaned = 0.00250212 Jy ! Component: 600 - total flux cleaned = 0.00257259 Jy ! Component: 650 - total flux cleaned = 0.00264217 Jy ! Component: 700 - total flux cleaned = 0.0027446 Jy ! Component: 750 - total flux cleaned = 0.0028118 Jy ! Component: 800 - total flux cleaned = 0.00281173 Jy ! Component: 850 - total flux cleaned = 0.00284488 Jy ! Component: 900 - total flux cleaned = 0.00294303 Jy ! Component: 950 - total flux cleaned = 0.00303983 Jy ! Component: 1000 - total flux cleaned = 0.00303964 Jy ! Component: 1050 - total flux cleaned = 0.00303992 Jy ! Component: 1100 - total flux cleaned = 0.00313483 Jy ! Component: 1150 - total flux cleaned = 0.00316583 Jy ! Component: 1200 - total flux cleaned = 0.00316581 Jy ! Component: 1250 - total flux cleaned = 0.00319689 Jy ! Component: 1300 - total flux cleaned = 0.00325799 Jy ! Component: 1350 - total flux cleaned = 0.00331847 Jy ! Component: 1400 - total flux cleaned = 0.00328851 Jy ! Component: 1450 - total flux cleaned = 0.00328835 Jy ! Component: 1500 - total flux cleaned = 0.00328836 Jy ! Component: 1550 - total flux cleaned = 0.00328854 Jy ! Component: 1600 - total flux cleaned = 0.00337637 Jy ! Component: 1650 - total flux cleaned = 0.00328882 Jy ! Component: 1700 - total flux cleaned = 0.00331799 Jy ! Component: 1750 - total flux cleaned = 0.0033755 Jy ! Component: 1800 - total flux cleaned = 0.00337543 Jy ! Component: 1850 - total flux cleaned = 0.00334692 Jy ! Component: 1900 - total flux cleaned = 0.0034032 Jy ! Component: 1950 - total flux cleaned = 0.00331919 Jy ! Component: 2000 - total flux cleaned = 0.00334713 Jy ! Total flux subtracted in 2048 components = 0.0033195 Jy ! Clean residual min=-0.001602 max=0.001753 Jy/beam ! Clean residual mean=-0.000014 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.991395 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 329 components and 0.991395 Jy ![Exited script file: muppet] wmap "J1640+3946_S_2003_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 3.431 at 11.03 degrees (North through East) ! Clean map min=-0.0027959 max=0.86143 Jy/beam ! Writing clean map to FITS file: J1640+3946_S_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.861434 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000524445 device "J1640+3946_S_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1640+3946_S_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182641 0.182641 0.365283 0.730565 1.46113 2.92226 5.84452 11.689 23.3781 46.7562 93.5123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.861 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 3.431 at 11.03 degrees (North through East) ! Clean map min=-0.0027959 max=0.86143 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1640+3946_S_2003_07_09_pus_uvs.log closed on Mon Apr 8 11:37:45 2013