! Started logfile: J1608+1029_X_2003_07_09_pus_uvs.log on Sun Apr 7 14:38:20 2013 obs J1608+1029_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J1608+1029_X_2003_07_09_pus_uva.fits ! AN table 1: 44 integrations on 171 of 171 possible baselines. ! AN table 2: 70 integrations on 171 of 171 possible baselines. ! AN table 3: 83 integrations on 171 of 171 possible baselines. ! AN table 4: 66 integrations on 171 of 171 possible baselines. ! AN table 5: 75 integrations on 171 of 171 possible baselines. ! AN table 6: 106 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0848743 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1608+1029 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 25776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1608+1029_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 815 telescope corrections were flagged in sub-array 1. ! A total of 942 telescope corrections were flagged in sub-array 2. ! A total of 1426 telescope corrections were flagged in sub-array 3. ! A total of 1099 telescope corrections were flagged in sub-array 4. ! A total of 1140 telescope corrections were flagged in sub-array 5. ! A total of 1166 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 815 telescope corrections were flagged in sub-array 1. ! A total of 942 telescope corrections were flagged in sub-array 2. ! A total of 1426 telescope corrections were flagged in sub-array 3. ! A total of 1099 telescope corrections were flagged in sub-array 4. ! A total of 1143 telescope corrections were flagged in sub-array 5. ! A total of 1166 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 815 telescope corrections were flagged in sub-array 1. ! A total of 942 telescope corrections were flagged in sub-array 2. ! A total of 1428 telescope corrections were flagged in sub-array 3. ! A total of 1102 telescope corrections were flagged in sub-array 4. ! A total of 1154 telescope corrections were flagged in sub-array 5. ! A total of 1166 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 815 telescope corrections were flagged in sub-array 1. ! A total of 942 telescope corrections were flagged in sub-array 2. ! A total of 1430 telescope corrections were flagged in sub-array 3. ! A total of 1101 telescope corrections were flagged in sub-array 4. ! A total of 1151 telescope corrections were flagged in sub-array 5. ! A total of 1166 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.640221Jy sigma=0.012637 ! Fit after self-cal, rms=1.197544Jy sigma=0.009741 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.6228 mas, bmaj=1.292 mas, bpa=-4.137 degrees ! Estimated noise=957.627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44545 Jy ! Component: 100 - total flux cleaned = 1.86301 Jy ! Total flux subtracted in 100 components = 1.86301 Jy ! Clean residual min=-0.051701 max=0.182119 Jy/beam ! Clean residual mean=-0.000295 rms=0.015133 Jy/beam ! Combined flux in latest and established models = 1.86301 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.86301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569686Jy sigma=0.004616 ! Fit after self-cal, rms=0.568851Jy sigma=0.004611 ! Inverting map ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214484 Jy ! Component: 100 - total flux cleaned = 0.35181 Jy ! Total flux subtracted in 100 components = 0.35181 Jy ! Clean residual min=-0.044499 max=0.087004 Jy/beam ! Clean residual mean=-0.000191 rms=0.010423 Jy/beam ! Combined flux in latest and established models = 2.21482 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 2.21482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418455Jy sigma=0.003180 ! Fit after self-cal, rms=0.418212Jy sigma=0.003179 ! Inverting map ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101504 Jy ! Component: 100 - total flux cleaned = 0.174437 Jy ! Total flux subtracted in 100 components = 0.174437 Jy ! Clean residual min=-0.039253 max=0.043941 Jy/beam ! Clean residual mean=-0.000144 rms=0.008919 Jy/beam ! Combined flux in latest and established models = 2.38926 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 2.38926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373777Jy sigma=0.002689 ! Fit after self-cal, rms=0.372469Jy sigma=0.002683 ! Inverting map ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8197 mas, bmaj=1.594 mas, bpa=-10.11 degrees ! Estimated noise=606.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114861 Jy ! Component: 100 - total flux cleaned = 0.18144 Jy ! Component: 150 - total flux cleaned = 0.222379 Jy ! Component: 200 - total flux cleaned = 0.247819 Jy ! Total flux subtracted in 200 components = 0.247819 Jy ! Clean residual min=-0.036349 max=0.062027 Jy/beam ! Clean residual mean=-0.000294 rms=0.011036 Jy/beam ! Combined flux in latest and established models = 2.63708 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 2.63708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345721Jy sigma=0.002311 ! Fit after self-cal, rms=0.344674Jy sigma=0.002305 ! Inverting map ! Your choice of large map pixels excluded 1.73% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 GC 0.94 GG 1.00* ! HN 1.00 KP 0.97 LA 1.03 MA 1.00* ! MK 0.93 NL 1.11 NY 1.00* ON 1.00* ! OV 1.01 PT 1.02 SC 1.00* TC 1.00* ! TS 1.16 WF 1.09 WZ 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.90 KP 1.00* LA 1.00* MA 1.11 ! MK 1.00* NL 1.00* NY 1.01 ON 1.03 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.04 ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.10 GC 1.00* GG 1.00* ! HN 0.99 KP 0.96 LA 1.04 MA 1.04 ! MK 1.00* NL 1.12 NY 0.99 ON 0.99 ! OV 1.05 PT 1.05 SC 0.86 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.11 ! ! A total of 45 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.14 ! MK 1.00* NL 1.00* NY 1.07 ON 1.07 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.85 WF 1.00* WZ 1.05 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 0.98 GC 1.10 GG 1.00* ! HN 0.98 KP 0.96 LA 0.97 MA 1.00* ! MK 1.02 NL 0.97 NY 0.98 ON 0.95 ! OV 0.96 PT 0.93 SC 0.91 TC 1.00* ! TS 1.00* WF 0.89 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 GC 0.98 GG 1.00* ! HN 1.01 KP 0.93 LA 1.03 MA 1.00* ! MK 0.94 NL 1.07 NY 1.00* ON 1.00* ! OV 1.00 PT 1.07 SC 1.00* TC 1.00* ! TS 1.14 WF 1.13 WZ 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.89 KP 1.00* LA 1.00* MA 1.06 ! MK 1.00* NL 1.00* NY 1.08 ON 1.06 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.07 ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.10 GC 1.00* GG 1.00* ! HN 0.98 KP 0.92 LA 1.05 MA 1.01 ! MK 1.00* NL 1.08 NY 1.03 ON 1.03 ! OV 1.05 PT 1.09 SC 0.81 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.13 ! ! A total of 54 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.11 ! MK 1.00* NL 1.00* NY 1.12 ON 1.07 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.84 WF 1.00* WZ 1.10 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 0.97 GC 1.16 GG 1.00* ! HN 0.99 KP 0.93 LA 0.96 MA 1.00* ! MK 1.04 NL 0.95 NY 1.02 ON 0.96 ! OV 0.96 PT 0.97 SC 0.87 TC 1.00* ! TS 1.00* WF 0.91 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 GC 1.10 GG 1.00* ! HN 1.00 KP 0.89 LA 1.05 MA 1.00* ! MK 0.94 NL 1.04 NY 1.00* ON 1.00* ! OV 1.05 PT 1.11 SC 1.00* TC 1.00* ! TS 1.13 WF 1.23 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.89 KP 1.00* LA 1.00* MA 1.05 ! MK 1.00* NL 1.00* NY 1.07 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.06 ! ! A total of 39 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.13 GC 1.00* GG 1.00* ! HN 0.99 KP 0.85 LA 1.05 MA 1.20 ! MK 1.00* NL 1.08 NY 1.13 ON 1.34 ! OV 1.09 PT 1.10 SC 0.84 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.18 ! ! A total of 69 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.20 ! MK 1.00* NL 1.00* NY 1.15 ON 1.08 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.89 WF 1.00* WZ 1.09 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 0.98 GC 1.17 GG 1.00* ! HN 0.98 KP 0.90 LA 0.98 MA 1.00* ! MK 1.04 NL 0.96 NY 1.05 ON 1.27 ! OV 0.99 PT 0.96 SC 0.88 TC 1.00* ! TS 1.00* WF 0.89 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 GC 1.13 GG 1.00* ! HN 1.03 KP 0.93 LA 1.03 MA 1.00* ! MK 0.97 NL 1.06 NY 1.00* ON 1.00* ! OV 1.04 PT 1.11 SC 1.00* TC 1.00* ! TS 1.14 WF 1.22 WZ 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.91 KP 1.00* LA 1.00* MA 1.15 ! MK 1.00* NL 1.00* NY 1.08 ON 1.07 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.99 ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.13 GC 1.00* GG 1.00* ! HN 1.01 KP 0.91 LA 1.04 MA 1.07 ! MK 1.00* NL 1.08 NY 1.07 ON 1.38 ! OV 1.08 PT 1.12 SC 0.90 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.18 ! ! A total of 78 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.17 ! MK 1.00* NL 1.00* NY 1.12 ON 1.14 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.84 WF 1.00* WZ 1.04 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 0.96 GC 1.19 GG 1.00* ! HN 1.01 KP 0.93 LA 0.96 MA 1.00* ! MK 1.07 NL 0.95 NY 1.03 ON 1.42 ! OV 0.99 PT 0.97 SC 0.94 TC 1.00* ! TS 1.00* WF 0.89 WZ 1.00* ! ! ! Fit before self-cal, rms=0.344674Jy sigma=0.002305 ! Fit after self-cal, rms=0.251399Jy sigma=0.001655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8354 mas, bmaj=1.642 mas, bpa=-10.87 degrees ! Estimated noise=610.167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129818 Jy ! Component: 100 - total flux cleaned = 0.0109305 Jy ! Component: 150 - total flux cleaned = 0.0100728 Jy ! Component: 200 - total flux cleaned = 0.010075 Jy ! Total flux subtracted in 200 components = 0.010075 Jy ! Clean residual min=-0.019911 max=0.018693 Jy/beam ! Clean residual mean=-0.000144 rms=0.004440 Jy/beam ! Combined flux in latest and established models = 2.64715 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 2.64715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243704Jy sigma=0.001581 ! Fit after self-cal, rms=0.243201Jy sigma=0.001576 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243201Jy sigma=0.001576 ! Fit after self-cal, rms=0.238866Jy sigma=0.001520 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8365 mas, bmaj=1.647 mas, bpa=-10.85 degrees ! Estimated noise=609.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191201 Jy ! Component: 100 - total flux cleaned = -0.003376 Jy ! Component: 150 - total flux cleaned = -0.00337456 Jy ! Component: 200 - total flux cleaned = -0.00335437 Jy ! Total flux subtracted in 200 components = -0.00335437 Jy ! Clean residual min=-0.017473 max=0.015054 Jy/beam ! Clean residual mean=-0.000208 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 2.6438 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 2.6438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235209Jy sigma=0.001486 ! Fit after self-cal, rms=0.234872Jy sigma=0.001484 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228929 Jy ! Component: 100 - total flux cleaned = 0.0026724 Jy ! Component: 150 - total flux cleaned = 0.00303567 Jy ! Component: 200 - total flux cleaned = 0.00272599 Jy ! Total flux subtracted in 200 components = 0.00272599 Jy ! Clean residual min=-0.015602 max=0.014463 Jy/beam ! Clean residual mean=-0.000214 rms=0.003544 Jy/beam ! Combined flux in latest and established models = 2.64652 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 2.64652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233594Jy sigma=0.001471 ! Fit after self-cal, rms=0.233415Jy sigma=0.001470 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233415Jy sigma=0.001470 ! Fit after self-cal, rms=0.228105Jy sigma=0.001400 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8393 mas, bmaj=1.657 mas, bpa=-10.93 degrees ! Estimated noise=610.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.013308 Jy ! Component: 100 - total flux cleaned = -0.0147267 Jy ! Component: 150 - total flux cleaned = -0.015108 Jy ! Component: 200 - total flux cleaned = -0.0164845 Jy ! Total flux subtracted in 200 components = -0.0164845 Jy ! Clean residual min=-0.014499 max=0.009298 Jy/beam ! Clean residual mean=-0.000301 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 2.63004 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 2.63004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225986Jy sigma=0.001381 ! Fit after self-cal, rms=0.225852Jy sigma=0.001381 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06548e-05 Jy ! Component: 100 - total flux cleaned = 6.46318e-05 Jy ! Component: 150 - total flux cleaned = -0.000184672 Jy ! Component: 200 - total flux cleaned = -0.000196124 Jy ! Total flux subtracted in 200 components = -0.000196124 Jy ! Clean residual min=-0.013626 max=0.009660 Jy/beam ! Clean residual mean=-0.000301 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 2.62984 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 2.62984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225172Jy sigma=0.001375 ! Fit after self-cal, rms=0.225085Jy sigma=0.001374 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225085Jy sigma=0.001374 ! Fit after self-cal, rms=0.224457Jy sigma=0.001367 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=2.17 mas, bmaj=2.81 mas, bpa=-22.73 degrees ! Estimated noise=764.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0102063 Jy ! Component: 100 - total flux cleaned = -0.0116047 Jy ! Component: 150 - total flux cleaned = -0.0128472 Jy ! Component: 200 - total flux cleaned = -0.013493 Jy ! Total flux subtracted in 200 components = -0.013493 Jy ! Clean residual min=-0.010762 max=0.008019 Jy/beam ! Clean residual mean=-0.000742 rms=0.002852 Jy/beam ! Combined flux in latest and established models = 2.61635 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 2.61635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223777Jy sigma=0.001360 ! Fit after self-cal, rms=0.223670Jy sigma=0.001360 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67669e-05 Jy ! Component: 100 - total flux cleaned = 0.000172794 Jy ! Component: 150 - total flux cleaned = -0.0001246 Jy ! Component: 200 - total flux cleaned = -0.000391174 Jy ! Total flux subtracted in 200 components = -0.000391174 Jy ! Clean residual min=-0.010849 max=0.008314 Jy/beam ! Clean residual mean=-0.000741 rms=0.002845 Jy/beam ! Combined flux in latest and established models = 2.61596 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 2.61596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223508Jy sigma=0.001358 ! Fit after self-cal, rms=0.223463Jy sigma=0.001358 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8421 mas, bmaj=1.666 mas, bpa=-11 degrees ! Estimated noise=611.064 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8421 x 1.666 at -11 degrees (North through East) ! Clean map min=-0.011709 max=2.035 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223463Jy sigma=0.001358 ! Fit after self-cal, rms=0.191028Jy sigma=0.001162 ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8433 mas, bmaj=1.669 mas, bpa=-11.05 degrees ! Estimated noise=609.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0103618 Jy ! Component: 100 - total flux cleaned = -0.0109778 Jy ! Component: 150 - total flux cleaned = -0.0117649 Jy ! Component: 200 - total flux cleaned = -0.0124167 Jy ! Total flux subtracted in 200 components = -0.0124167 Jy ! Clean residual min=-0.009463 max=0.006322 Jy/beam ! Clean residual mean=-0.000263 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 2.60354 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 2.60354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189839Jy sigma=0.001153 ! Fit after self-cal, rms=0.189788Jy sigma=0.001153 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.62995e-05 Jy ! Component: 100 - total flux cleaned = -4.93846e-05 Jy ! Component: 150 - total flux cleaned = -5.55299e-05 Jy ! Component: 200 - total flux cleaned = -5.72233e-05 Jy ! Total flux subtracted in 200 components = -5.72233e-05 Jy ! Clean residual min=-0.009299 max=0.006177 Jy/beam ! Clean residual mean=-0.000263 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 2.60349 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 2.60349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189436Jy sigma=0.001150 ! Fit after self-cal, rms=0.189410Jy sigma=0.001150 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189410Jy sigma=0.001150 ! Fit after self-cal, rms=0.189135Jy sigma=0.001145 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.6427 mas, bmaj=1.335 mas, bpa=-5.549 degrees ! Estimated noise=988.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.49332 Jy ! Component: 100 - total flux cleaned = 1.90791 Jy ! Component: 150 - total flux cleaned = 2.10322 Jy ! Component: 200 - total flux cleaned = 2.22995 Jy ! Total flux subtracted in 200 components = 2.22995 Jy ! Clean residual min=-0.017455 max=0.069265 Jy/beam ! Clean residual mean=-0.000123 rms=0.006009 Jy/beam ! Combined flux in latest and established models = 2.22995 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.22995 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8457 mas, bmaj=1.676 mas, bpa=-11.08 degrees ! Estimated noise=609.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139469 Jy ! Component: 100 - total flux cleaned = 0.217588 Jy ! Component: 150 - total flux cleaned = 0.265929 Jy ! Component: 200 - total flux cleaned = 0.297432 Jy ! Total flux subtracted in 200 components = 0.297432 Jy ! Clean residual min=-0.009455 max=0.017984 Jy/beam ! Clean residual mean=-0.000159 rms=0.002702 Jy/beam ! Combined flux in latest and established models = 2.52738 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 57 components and 2.52738 Jy ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Added new window around map position (0.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213455 Jy ! Component: 100 - total flux cleaned = 0.0359796 Jy ! Component: 150 - total flux cleaned = 0.0461446 Jy ! Component: 200 - total flux cleaned = 0.0523608 Jy ! Total flux subtracted in 200 components = 0.0523608 Jy ! Clean residual min=-0.008304 max=0.006791 Jy/beam ! Clean residual mean=-0.000224 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 2.57974 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 83 components and 2.57974 Jy ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=2.17 mas, bmaj=2.822 mas, bpa=-22.56 degrees ! Estimated noise=758.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747831 Jy ! Component: 100 - total flux cleaned = 0.0107286 Jy ! Component: 150 - total flux cleaned = 0.0116096 Jy ! Component: 200 - total flux cleaned = 0.0117945 Jy ! Total flux subtracted in 200 components = 0.0117945 Jy ! Clean residual min=-0.007472 max=0.006162 Jy/beam ! Clean residual mean=-0.000581 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 2.59153 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.19757e-05 Jy ! Component: 100 - total flux cleaned = 0.000157351 Jy ! Component: 150 - total flux cleaned = 0.000226391 Jy ! Component: 200 - total flux cleaned = 0.000289235 Jy ! Total flux subtracted in 200 components = 0.000289235 Jy ! Clean residual min=-0.007350 max=0.006193 Jy/beam ! Clean residual mean=-0.000581 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 2.59182 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 109 components and 2.59182 Jy ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! Estimated beam: bmin=0.8457 mas, bmaj=1.676 mas, bpa=-11.08 degrees ! Estimated noise=609.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00338138 Jy ! Component: 100 - total flux cleaned = -0.00299421 Jy ! Component: 150 - total flux cleaned = -0.00263674 Jy ! Component: 200 - total flux cleaned = -0.00247336 Jy ! Total flux subtracted in 200 components = -0.00247336 Jy ! Clean residual min=-0.007864 max=0.006155 Jy/beam ! Clean residual mean=-0.000239 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 2.58935 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 2.58935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187437Jy sigma=0.001136 ! Fit after self-cal, rms=0.187291Jy sigma=0.001135 wmodel J1608+1029_X_2003_07_09_pus_map.mod ! Writing 120 model components to file: J1608+1029_X_2003_07_09_pus_map.mod wobs J1608+1029_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J1608+1029_X_2003_07_09_pus_uvs.fits wwins J1608+1029_X_2003_07_09_pus_map.win ! wwins: Wrote 4 windows to J1608+1029_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340459 Jy ! Component: 100 - total flux cleaned = -0.00642388 Jy ! Component: 150 - total flux cleaned = -0.00857198 Jy ! Component: 200 - total flux cleaned = -0.0101943 Jy ! Component: 250 - total flux cleaned = -0.0116621 Jy ! Component: 300 - total flux cleaned = -0.0130892 Jy ! Component: 350 - total flux cleaned = -0.0143842 Jy ! Component: 400 - total flux cleaned = -0.0154599 Jy ! Component: 450 - total flux cleaned = -0.0168981 Jy ! Component: 500 - total flux cleaned = -0.017933 Jy ! Component: 550 - total flux cleaned = -0.0189512 Jy ! Component: 600 - total flux cleaned = -0.019953 Jy ! Component: 650 - total flux cleaned = -0.0206694 Jy ! Component: 700 - total flux cleaned = -0.0214642 Jy ! Component: 750 - total flux cleaned = -0.0223338 Jy ! Component: 800 - total flux cleaned = -0.0227625 Jy ! Component: 850 - total flux cleaned = -0.0234397 Jy ! Component: 900 - total flux cleaned = -0.0238584 Jy ! Component: 950 - total flux cleaned = -0.0243538 Jy ! Component: 1000 - total flux cleaned = -0.0246815 Jy ! Component: 1050 - total flux cleaned = -0.025086 Jy ! Component: 1100 - total flux cleaned = -0.0254864 Jy ! Component: 1150 - total flux cleaned = -0.0258806 Jy ! Component: 1200 - total flux cleaned = -0.0265044 Jy ! Component: 1250 - total flux cleaned = -0.0267358 Jy ! Component: 1300 - total flux cleaned = -0.027118 Jy ! Component: 1350 - total flux cleaned = -0.0274205 Jy ! Component: 1400 - total flux cleaned = -0.0278705 Jy ! Component: 1450 - total flux cleaned = -0.0283156 Jy ! Component: 1500 - total flux cleaned = -0.0287558 Jy ! Component: 1550 - total flux cleaned = -0.0288286 Jy ! Component: 1600 - total flux cleaned = -0.0294063 Jy ! Component: 1650 - total flux cleaned = -0.0296213 Jy ! Component: 1700 - total flux cleaned = -0.0301177 Jy ! Component: 1750 - total flux cleaned = -0.0303284 Jy ! Component: 1800 - total flux cleaned = -0.0308164 Jy ! Component: 1850 - total flux cleaned = -0.0309549 Jy ! Component: 1900 - total flux cleaned = -0.0315043 Jy ! Component: 1950 - total flux cleaned = -0.0315719 Jy ! Component: 2000 - total flux cleaned = -0.0318425 Jy ! Total flux subtracted in 2048 components = -0.0321105 Jy ! Clean residual min=-0.003440 max=0.003474 Jy/beam ! Clean residual mean=-0.000144 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 2.55724 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 256 components and 2.55724 Jy ![Exited script file: muppet] wmap "J1608+1029_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8457 x 1.676 at -11.08 degrees (North through East) ! Clean map min=-0.0076882 max=2.0377 Jy/beam ! Writing clean map to FITS file: J1608+1029_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.03769 invert ! Inverting map ! Your choice of large map pixels excluded 1.8% of the data. ! The x-axis pixel size should ideally be below 0.1819 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00119628 device "J1608+1029_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1608+1029_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176123 0.176123 0.352245 0.70449 1.40898 2.81796 5.63592 11.2718 22.5437 45.0874 90.1748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.037 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8457 x 1.676 at -11.08 degrees (North through East) ! Clean map min=-0.0076882 max=2.0377 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1608+1029_X_2003_07_09_pus_uvs.log closed on Sun Apr 7 14:38:32 2013