! Started logfile: J1454-3747_S_2003_07_09_pus_uvs.log on Mon Apr  8 11:14:06 2013
obs J1454-3747_S_2003_07_09_pus_uva.fits
! Reading UV FITS file: J1454-3747_S_2003_07_09_pus_uva.fits
! AN table 1: 59 integrations on 171 of 171 possible baselines.
! AN table 2: 98 integrations on 171 of 171 possible baselines.
! AN table 3: 229 integrations on 171 of 171 possible baselines.
! AN table 4: 133 integrations on 171 of 171 possible baselines.
! AN table 5: 10 integrations on 171 of 171 possible baselines.
! AN table 6: 122 integrations on 171 of 171 possible baselines.
! AN table 7: 32 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.070321 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1454-3747
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1520 lines of history.
! 
! Reading 32852 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1454-3747_S_2003_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1121 telescope corrections were flagged in sub-array 1.
!  A total of 1862 telescope corrections were flagged in sub-array 2.
!  A total of 2905 telescope corrections were flagged in sub-array 3.
!  A total of 1654 telescope corrections were flagged in sub-array 4.
!  A total of 190 telescope corrections were flagged in sub-array 5.
!  A total of 2318 telescope corrections were flagged in sub-array 6.
!  A total of 471 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 2.
!  A total of 1121 telescope corrections were flagged in sub-array 1.
!  A total of 1733 telescope corrections were flagged in sub-array 2.
!  A total of 2910 telescope corrections were flagged in sub-array 3.
!  A total of 1653 telescope corrections were flagged in sub-array 4.
!  A total of 190 telescope corrections were flagged in sub-array 5.
!  A total of 2318 telescope corrections were flagged in sub-array 6.
!  A total of 471 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 3.
!  A total of 1121 telescope corrections were flagged in sub-array 1.
!  A total of 1706 telescope corrections were flagged in sub-array 2.
!  A total of 2910 telescope corrections were flagged in sub-array 3.
!  A total of 1654 telescope corrections were flagged in sub-array 4.
!  A total of 190 telescope corrections were flagged in sub-array 5.
!  A total of 2318 telescope corrections were flagged in sub-array 6.
!  A total of 471 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 4.
!  A total of 1121 telescope corrections were flagged in sub-array 1.
!  A total of 1706 telescope corrections were flagged in sub-array 2.
!  A total of 2911 telescope corrections were flagged in sub-array 3.
!  A total of 1653 telescope corrections were flagged in sub-array 4.
!  A total of 190 telescope corrections were flagged in sub-array 5.
!  A total of 2318 telescope corrections were flagged in sub-array 6.
!  A total of 471 telescope corrections were flagged in sub-array 7.
! 
! Fit before self-cal, rms=0.811962Jy  sigma=0.004415
! Fit after  self-cal, rms=0.553096Jy  sigma=0.002530
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=4.103 mas, bpa=9.418 degrees
! Estimated noise=1645.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.510388 Jy
! Component: 100  -  total flux cleaned = 0.644034 Jy
! Total flux subtracted in 100 components = 0.644034 Jy
! Clean residual min=-0.039542 max=0.067470 Jy/beam
! Clean residual mean=0.001531 rms=0.011943 Jy/beam
! Combined flux in latest and established models = 0.644034 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.644034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.510190Jy  sigma=0.002376
! Fit after  self-cal, rms=0.510195Jy  sigma=0.002375
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=5.553 mas, bpa=2.501 degrees
! Estimated noise=661.551 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160702 Jy
! Component: 100  -  total flux cleaned = 0.226405 Jy
! Component: 150  -  total flux cleaned = 0.255494 Jy
! Component: 200  -  total flux cleaned = 0.268489 Jy
! Total flux subtracted in 200 components = 0.268489 Jy
! Clean residual min=-0.027587 max=0.047704 Jy/beam
! Clean residual mean=0.001039 rms=0.009398 Jy/beam
! Combined flux in latest and established models = 0.912523 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.912523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.474444Jy  sigma=0.001878
! Fit after  self-cal, rms=0.474226Jy  sigma=0.001877
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    FD        1.13     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.86     LA        1.14     MA        1.00*    
!   MK        0.96     NL        1.31     NY        1.00*    ON        1.00*    
!   OV        0.78     PT        1.01     SC        0.88     TC        1.11     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    FD        1.13     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.91     LA        1.15     MA        1.00*    
!   MK        1.00     NL        1.27     NY        1.00*    ON        1.00*    
!   OV        0.97     PT        1.03     SC        0.89     TC        0.99     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.00*    FD        1.30     GC        1.00*    GG        1.00*    
!   HN        1.58     KP        1.10     LA        1.29     MA        1.00*    
!   MK        1.00*    NL        2.03     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.13     SC        0.87     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 129 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    FD        1.05     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        1.07     MA        1.00*    
!   MK        1.01     NL        1.44     NY        1.00*    ON        1.00*    
!   OV        1.06     PT        0.99     SC        0.95     TC        1.05     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    FD        1.06     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        1.01     LA        1.07     MA        1.00*    
!   MK        1.06     NL        1.34     NY        1.00*    ON        1.00*    
!   OV        1.07     PT        0.99     SC        0.94     TC        1.02     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.00*    FD        1.11     GC        1.00*    GG        1.00*    
!   HN        1.84     KP        1.19     LA        1.21     MA        1.00*    
!   MK        1.00*    NL        2.13     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.13     SC        0.89     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 156 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    FD        0.99     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.93     LA        0.91     MA        1.00*    
!   MK        0.99     NL        1.52     NY        1.00*    ON        1.00*    
!   OV        1.01     PT        1.03     SC        1.13     TC        1.04     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    FD        0.99     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.98     LA        0.91     MA        1.00*    
!   MK        1.00     NL        1.36     NY        1.00*    ON        1.00*    
!   OV        0.91     PT        1.05     SC        1.07     TC        0.88     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.00*    FD        1.02     GC        1.00*    GG        1.00*    
!   HN        1.70     KP        1.19     LA        1.02     MA        1.00*    
!   MK        1.00*    NL        2.40     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.22     SC        1.06     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 156 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    FD        0.89     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.95     LA        0.73     MA        1.00*    
!   MK        0.92     NL        1.42     NY        1.00*    ON        1.00*    
!   OV        0.95     PT        0.99     SC        1.11     TC        1.00     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    FD        0.89     GC        1.00*    GG        1.00*    
!   HN        1.00*    KP        0.98     LA        0.74     MA        1.00*    
!   MK        0.96     NL        1.28     NY        1.00*    ON        1.00*    
!   OV        0.70     PT        1.01     SC        1.07     TC        0.98     
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.00*    FD        0.95     GC        1.00*    GG        1.00*    
!   HN        1.36     KP        1.23     LA        0.83     MA        1.00*    
!   MK        1.00*    NL        2.02     NY        1.00*    ON        1.00*    
!   OV        1.00*    PT        1.11     SC        0.99     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.474226Jy  sigma=0.001877
! Fit after  self-cal, rms=0.452708Jy  sigma=0.001495
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.191 mas, bmaj=5.768 mas, bpa=1.373 degrees
! Estimated noise=663.082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245498 Jy
! Component: 100  -  total flux cleaned = 0.0282966 Jy
! Component: 150  -  total flux cleaned = 0.0280835 Jy
! Component: 200  -  total flux cleaned = 0.0280744 Jy
! Total flux subtracted in 200 components = 0.0280744 Jy
! Clean residual min=-0.010275 max=0.015859 Jy/beam
! Clean residual mean=-0.000248 rms=0.003420 Jy/beam
! Combined flux in latest and established models = 0.940598 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.940598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.451305Jy  sigma=0.001480
! Fit after  self-cal, rms=0.452315Jy  sigma=0.001477
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.452315Jy  sigma=0.001477
! Fit after  self-cal, rms=0.447985Jy  sigma=0.001456
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.167 mas, bmaj=5.759 mas, bpa=1.216 degrees
! Estimated noise=660.965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105583 Jy
! Component: 100  -  total flux cleaned = 0.0128688 Jy
! Component: 150  -  total flux cleaned = 0.0125595 Jy
! Component: 200  -  total flux cleaned = 0.0121441 Jy
! Total flux subtracted in 200 components = 0.0121441 Jy
! Clean residual min=-0.008173 max=0.012698 Jy/beam
! Clean residual mean=-0.000070 rms=0.002698 Jy/beam
! Combined flux in latest and established models = 0.952742 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.952742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447668Jy  sigma=0.001453
! Fit after  self-cal, rms=0.447570Jy  sigma=0.001452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16, -55.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010126 Jy
! Component: 100  -  total flux cleaned = 0.0125112 Jy
! Component: 150  -  total flux cleaned = 0.0131203 Jy
! Component: 200  -  total flux cleaned = 0.0132558 Jy
! Total flux subtracted in 200 components = 0.0132558 Jy
! Clean residual min=-0.009014 max=0.009536 Jy/beam
! Clean residual mean=-0.000319 rms=0.002305 Jy/beam
! Combined flux in latest and established models = 0.965997 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.965997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447275Jy  sigma=0.001449
! Fit after  self-cal, rms=0.447224Jy  sigma=0.001449
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447224Jy  sigma=0.001449
! Fit after  self-cal, rms=0.442258Jy  sigma=0.001436
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.155 mas, bmaj=5.743 mas, bpa=1.193 degrees
! Estimated noise=658.891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654351 Jy
! Component: 100  -  total flux cleaned = 0.00934774 Jy
! Component: 150  -  total flux cleaned = 0.00985219 Jy
! Component: 200  -  total flux cleaned = 0.00973963 Jy
! Total flux subtracted in 200 components = 0.00973963 Jy
! Clean residual min=-0.006561 max=0.007000 Jy/beam
! Clean residual mean=-0.000053 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.975737 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 92 components and 0.975737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.442100Jy  sigma=0.001435
! Fit after  self-cal, rms=0.442115Jy  sigma=0.001435
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016613 Jy
! Component: 100  -  total flux cleaned = 0.00166837 Jy
! Component: 150  -  total flux cleaned = 0.00156577 Jy
! Component: 200  -  total flux cleaned = 0.00137645 Jy
! Total flux subtracted in 200 components = 0.00137645 Jy
! Clean residual min=-0.006282 max=0.006909 Jy/beam
! Clean residual mean=-0.000075 rms=0.001583 Jy/beam
! Combined flux in latest and established models = 0.977114 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.977114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.442041Jy  sigma=0.001434
! Fit after  self-cal, rms=0.442032Jy  sigma=0.001434
! Inverting map 
! Added new window around map position (57, 32).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561504 Jy
! Component: 100  -  total flux cleaned = 0.00745747 Jy
! Component: 150  -  total flux cleaned = 0.00727487 Jy
! Component: 200  -  total flux cleaned = 0.00727875 Jy
! Total flux subtracted in 200 components = 0.00727875 Jy
! Clean residual min=-0.005947 max=0.004614 Jy/beam
! Clean residual mean=-0.000111 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.984392 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 0.984392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.441914Jy  sigma=0.001433
! Fit after  self-cal, rms=0.441900Jy  sigma=0.001433
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.441900Jy  sigma=0.001433
! Fit after  self-cal, rms=0.439755Jy  sigma=0.001433
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.849 mas, bmaj=29.48 mas, bpa=3.121 degrees
! Estimated noise=756.158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355455 Jy
! Component: 100  -  total flux cleaned = 0.00392639 Jy
! Component: 150  -  total flux cleaned = 0.00377493 Jy
! Component: 200  -  total flux cleaned = 0.0034323 Jy
! Total flux subtracted in 200 components = 0.0034323 Jy
! Clean residual min=-0.004707 max=0.005160 Jy/beam
! Clean residual mean=-0.000175 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.987825 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 119 components and 0.987825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439734Jy  sigma=0.001433
! Fit after  self-cal, rms=0.439718Jy  sigma=0.001432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636493 Jy
! Component: 100  -  total flux cleaned = 0.000425221 Jy
! Component: 150  -  total flux cleaned = -2.07551e-05 Jy
! Component: 200  -  total flux cleaned = -0.000249719 Jy
! Total flux subtracted in 200 components = -0.000249719 Jy
! Clean residual min=-0.004385 max=0.005001 Jy/beam
! Clean residual mean=-0.000177 rms=0.001341 Jy/beam
! Combined flux in latest and established models = 0.987575 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.987575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439704Jy  sigma=0.001432
! Fit after  self-cal, rms=0.439710Jy  sigma=0.001432
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=5.731 mas, bpa=1.223 degrees
! Estimated noise=659.293 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 5.731 at 1.223 degrees (North through East)
! Clean map  min=-0.0049166  max=0.7313 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439710Jy  sigma=0.001432
! Fit after  self-cal, rms=0.608871Jy  sigma=0.001213
! Inverting map and beam 
! Estimated beam: bmin=3.156 mas, bmaj=5.724 mas, bpa=1.222 degrees
! Estimated noise=659.153 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182654 Jy
! Component: 100  -  total flux cleaned = 0.00151456 Jy
! Component: 150  -  total flux cleaned = 0.00122356 Jy
! Component: 200  -  total flux cleaned = 0.00113127 Jy
! Total flux subtracted in 200 components = 0.00113127 Jy
! Clean residual min=-0.004839 max=0.004419 Jy/beam
! Clean residual mean=-0.000112 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.988706 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 137 components and 0.988706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.608810Jy  sigma=0.001212
! Fit after  self-cal, rms=0.608810Jy  sigma=0.001212
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000581271 Jy
! Component: 100  -  total flux cleaned = 0.00042007 Jy
! Component: 150  -  total flux cleaned = 0.000108906 Jy
! Component: 200  -  total flux cleaned = -0.000184684 Jy
! Total flux subtracted in 200 components = -0.000184684 Jy
! Clean residual min=-0.004756 max=0.004219 Jy/beam
! Clean residual mean=-0.000111 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.988522 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 142 components and 0.988522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.608776Jy  sigma=0.001212
! Fit after  self-cal, rms=0.608790Jy  sigma=0.001212
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.608790Jy  sigma=0.001212
! Fit after  self-cal, rms=0.594627Jy  sigma=0.001212
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=4.227 mas, bpa=7.904 degrees
! Estimated noise=1631.95 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.533729 Jy
! Component: 100  -  total flux cleaned = 0.684071 Jy
! Component: 150  -  total flux cleaned = 0.760669 Jy
! Component: 200  -  total flux cleaned = 0.808147 Jy
! Total flux subtracted in 200 components = 0.808147 Jy
! Clean residual min=-0.011309 max=0.028866 Jy/beam
! Clean residual mean=0.000995 rms=0.004435 Jy/beam
! Combined flux in latest and established models = 0.808148 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.808148 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=5.718 mas, bpa=1.229 degrees
! Estimated noise=659.857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0698027 Jy
! Component: 100  -  total flux cleaned = 0.104836 Jy
! Component: 150  -  total flux cleaned = 0.125784 Jy
! Component: 200  -  total flux cleaned = 0.140137 Jy
! Total flux subtracted in 200 components = 0.140137 Jy
! Clean residual min=-0.005738 max=0.012646 Jy/beam
! Clean residual mean=0.000479 rms=0.002615 Jy/beam
! Combined flux in latest and established models = 0.948285 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 81 components and 0.948284 Jy
! Inverting map 
! Added new window around map position (-9, -17.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115661 Jy
! Component: 100  -  total flux cleaned = 0.0188637 Jy
! Component: 150  -  total flux cleaned = 0.0245414 Jy
! Component: 200  -  total flux cleaned = 0.0290163 Jy
! Total flux subtracted in 200 components = 0.0290163 Jy
! Clean residual min=-0.004536 max=0.005752 Jy/beam
! Clean residual mean=0.000047 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.977301 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 105 components and 0.977301 Jy
! Inverting map 
! Added new window around map position (4, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440661 Jy
! Component: 100  -  total flux cleaned = 0.00564091 Jy
! Component: 150  -  total flux cleaned = 0.00623537 Jy
! Component: 200  -  total flux cleaned = 0.00677813 Jy
! Total flux subtracted in 200 components = 0.00677813 Jy
! Clean residual min=-0.004091 max=0.004515 Jy/beam
! Clean residual mean=-0.000039 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.984079 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 123 components and 0.984079 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.837 mas, bmaj=29.46 mas, bpa=3.086 degrees
! Estimated noise=756.649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016376 Jy
! Component: 100  -  total flux cleaned = 0.00205316 Jy
! Component: 150  -  total flux cleaned = 0.00199335 Jy
! Component: 200  -  total flux cleaned = 0.0019931 Jy
! Total flux subtracted in 200 components = 0.0019931 Jy
! Clean residual min=-0.003985 max=0.004650 Jy/beam
! Clean residual mean=-0.000121 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.986072 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.20987e-06 Jy
! Component: 100  -  total flux cleaned = 4.52994e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129983 Jy
! Component: 200  -  total flux cleaned = 0.000129899 Jy
! Total flux subtracted in 200 components = 0.000129899 Jy
! Clean residual min=-0.003807 max=0.004555 Jy/beam
! Clean residual mean=-0.000129 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.986202 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 0.986202 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=5.718 mas, bpa=1.229 degrees
! Estimated noise=659.857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000444929 Jy
! Component: 100  -  total flux cleaned = -0.000443545 Jy
! Component: 150  -  total flux cleaned = -0.00052529 Jy
! Component: 200  -  total flux cleaned = -0.000526289 Jy
! Total flux subtracted in 200 components = -0.000526289 Jy
! Clean residual min=-0.003656 max=0.004161 Jy/beam
! Clean residual mean=-0.000063 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.985675 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 167 components and 0.985675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.594488Jy  sigma=0.001211
! Fit after  self-cal, rms=0.594471Jy  sigma=0.001210
wmodel J1454-3747_S_2003_07_09_pus_map.mod
! Writing 167 model components to file: J1454-3747_S_2003_07_09_pus_map.mod
wobs J1454-3747_S_2003_07_09_pus_uvs.fits
! Writing UV FITS file: J1454-3747_S_2003_07_09_pus_uvs.fits
wwins J1454-3747_S_2003_07_09_pus_map.win
! wwins: Wrote 7 windows to J1454-3747_S_2003_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000773033 Jy
! Component: 100  -  total flux cleaned = -0.00121086 Jy
! Component: 150  -  total flux cleaned = -0.00162431 Jy
! Component: 200  -  total flux cleaned = -0.00190419 Jy
! Component: 250  -  total flux cleaned = -0.00222828 Jy
! Component: 300  -  total flux cleaned = -0.00233284 Jy
! Component: 350  -  total flux cleaned = -0.00258902 Jy
! Component: 400  -  total flux cleaned = -0.00268908 Jy
! Component: 450  -  total flux cleaned = -0.00283528 Jy
! Component: 500  -  total flux cleaned = -0.00302353 Jy
! Component: 550  -  total flux cleaned = -0.00302209 Jy
! Component: 600  -  total flux cleaned = -0.00306701 Jy
! Component: 650  -  total flux cleaned = -0.00319941 Jy
! Component: 700  -  total flux cleaned = -0.00324271 Jy
! Component: 750  -  total flux cleaned = -0.00337045 Jy
! Component: 800  -  total flux cleaned = -0.00341201 Jy
! Component: 850  -  total flux cleaned = -0.0034125 Jy
! Component: 900  -  total flux cleaned = -0.00357591 Jy
! Component: 950  -  total flux cleaned = -0.00365638 Jy
! Component: 1000  -  total flux cleaned = -0.00365634 Jy
! Component: 1050  -  total flux cleaned = -0.00369582 Jy
! Component: 1100  -  total flux cleaned = -0.00377317 Jy
! Component: 1150  -  total flux cleaned = -0.00384976 Jy
! Component: 1200  -  total flux cleaned = -0.00388754 Jy
! Component: 1250  -  total flux cleaned = -0.00396184 Jy
! Component: 1300  -  total flux cleaned = -0.00403551 Jy
! Component: 1350  -  total flux cleaned = -0.00403483 Jy
! Component: 1400  -  total flux cleaned = -0.00407078 Jy
! Component: 1450  -  total flux cleaned = -0.00407086 Jy
! Component: 1500  -  total flux cleaned = -0.0041411 Jy
! Component: 1550  -  total flux cleaned = -0.00410617 Jy
! Component: 1600  -  total flux cleaned = -0.00414091 Jy
! Component: 1650  -  total flux cleaned = -0.00414113 Jy
! Component: 1700  -  total flux cleaned = -0.00414124 Jy
! Component: 1750  -  total flux cleaned = -0.00420878 Jy
! Component: 1800  -  total flux cleaned = -0.00424175 Jy
! Component: 1850  -  total flux cleaned = -0.00424153 Jy
! Component: 1900  -  total flux cleaned = -0.00424164 Jy
! Component: 1950  -  total flux cleaned = -0.00433885 Jy
! Component: 2000  -  total flux cleaned = -0.00437066 Jy
! Total flux subtracted in 2048 components = -0.00443452 Jy
! Clean residual min=-0.002202 max=0.001985 Jy/beam
! Clean residual mean=-0.000021 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.981241 Jy
keep
! Adding 104 model components to the UV plane model.
! The established model now contains 271 components and 0.981241 Jy
![Exited script file: muppet]
wmap "J1454-3747_S_2003_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 5.718 at 1.229 degrees (North through East)
! Clean map  min=-0.0047112  max=0.73004 Jy/beam
! Writing clean map to FITS file: J1454-3747_S_2003_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.730041 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000591291 
device "J1454-3747_S_2003_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1454-3747_S_2003_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.242983 0.242983 0.485965 0.97193 1.94386 3.88772 7.77544 15.5509 31.1018 62.2035
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.73 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 5.718 at 1.229 degrees (North through East)
! Clean map  min=-0.0047112  max=0.73004 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
quit
! Quitting program
! Log file J1454-3747_S_2003_07_09_pus_uvs.log closed on Mon Apr  8 11:14:22 2013