! Started logfile: J1302+5748_S_2003_07_09_pus_uvs.log on Sun Apr  7 22:23:20 2013
obs J1302+5748_S_2003_07_09_pus_uva.fits
! Reading UV FITS file: J1302+5748_S_2003_07_09_pus_uva.fits
! AN table 1: 156 integrations on 171 of 171 possible baselines.
! AN table 2: 120 integrations on 171 of 171 possible baselines.
! AN table 3: 120 integrations on 171 of 171 possible baselines.
! AN table 4: 90 integrations on 171 of 171 possible baselines.
! AN table 5: 50 integrations on 171 of 171 possible baselines.
! AN table 6: 21 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.181108 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1302+5748
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1520 lines of history.
! 
! Reading 69000 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1302+5748_S_2003_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1844 telescope corrections were flagged in sub-array 1.
!  A total of 1664 telescope corrections were flagged in sub-array 2.
!  A total of 1419 telescope corrections were flagged in sub-array 3.
!  A total of 831 telescope corrections were flagged in sub-array 4.
!  A total of 881 telescope corrections were flagged in sub-array 5.
!  A total of 247 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 1947 telescope corrections were flagged in sub-array 1.
!  A total of 1651 telescope corrections were flagged in sub-array 2.
!  A total of 1413 telescope corrections were flagged in sub-array 3.
!  A total of 904 telescope corrections were flagged in sub-array 4.
!  A total of 950 telescope corrections were flagged in sub-array 5.
!  A total of 247 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 1843 telescope corrections were flagged in sub-array 1.
!  A total of 1662 telescope corrections were flagged in sub-array 2.
!  A total of 1413 telescope corrections were flagged in sub-array 3.
!  A total of 828 telescope corrections were flagged in sub-array 4.
!  A total of 881 telescope corrections were flagged in sub-array 5.
!  A total of 247 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 1843 telescope corrections were flagged in sub-array 1.
!  A total of 1665 telescope corrections were flagged in sub-array 2.
!  A total of 1414 telescope corrections were flagged in sub-array 3.
!  A total of 828 telescope corrections were flagged in sub-array 4.
!  A total of 890 telescope corrections were flagged in sub-array 5.
!  A total of 247 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=0.829882Jy  sigma=0.005522
! Fit after  self-cal, rms=0.468257Jy  sigma=0.003090
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.898 mas, bmaj=2.709 mas, bpa=-3.79 degrees
! Estimated noise=790.915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.492827 Jy
! Component: 100  -  total flux cleaned = 0.600447 Jy
! Total flux subtracted in 100 components = 0.600447 Jy
! Clean residual min=-0.016157 max=0.031804 Jy/beam
! Clean residual mean=0.000000 rms=0.004126 Jy/beam
! Combined flux in latest and established models = 0.600447 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.600447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.330453Jy  sigma=0.001941
! Fit after  self-cal, rms=0.330450Jy  sigma=0.001941
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0350214 Jy
! Component: 100  -  total flux cleaned = 0.0560758 Jy
! Total flux subtracted in 100 components = 0.0560758 Jy
! Clean residual min=-0.016286 max=0.017498 Jy/beam
! Clean residual mean=0.000004 rms=0.003841 Jy/beam
! Combined flux in latest and established models = 0.656523 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 21 components and 0.656523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.323821Jy  sigma=0.001878
! Fit after  self-cal, rms=0.323784Jy  sigma=0.001878
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.433 mas, bmaj=3.27 mas, bpa=-2.471 degrees
! Estimated noise=412.156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273425 Jy
! Component: 100  -  total flux cleaned = 0.0377582 Jy
! Component: 150  -  total flux cleaned = 0.0422305 Jy
! Component: 200  -  total flux cleaned = 0.0426783 Jy
! Total flux subtracted in 200 components = 0.0426783 Jy
! Clean residual min=-0.011304 max=0.012305 Jy/beam
! Clean residual mean=0.000349 rms=0.003122 Jy/beam
! Combined flux in latest and established models = 0.699201 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.699201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.321957Jy  sigma=0.001860
! Fit after  self-cal, rms=0.321926Jy  sigma=0.001860
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.15     GC        0.98     GG        1.00*    
!   HN        0.94     KP        0.93     LA        1.16     MA        2.07     
!   MK        1.00*    NL        0.96     NY        1.04     ON        1.15     
!   OV        1.05     PT        1.04     SC        0.86     TC        1.00*    
!   TS        1.08     WF        0.96     WZ        1.00*    
! 
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.00*    GC        1.00     GG        1.00*    
!   HN        1.05     KP        0.95     LA        1.24     MA        1.00*    
!   MK        1.00*    NL        1.02     NY        1.19     ON        1.00*    
!   OV        2.90     PT        1.02     SC        1.00*    TC        1.00*    
!   TS        1.05     WF        0.95     WZ        1.00*    
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.13     FD        1.29     GC        1.02     GG        1.00*    
!   HN        0.95     KP        1.13     LA        1.31     MA        1.00*    
!   MK        1.00*    NL        1.03     NY        1.42     ON        1.00*    
!   OV        0.94     PT        1.12     SC        0.94     TC        1.00*    
!   TS        0.99     WF        0.84     WZ        1.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.95     FD        1.10     GC        0.96     GG        1.00*    
!   HN        0.84     KP        0.90     LA        1.12     MA        0.92     
!   MK        0.95     NL        0.96     NY        1.10     ON        1.25     
!   OV        0.92     PT        0.98     SC        1.00*    TC        1.00*    
!   TS        1.02     WF        1.00*    WZ        0.97     
! 
!  A total of 69 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.99     FD        1.12     GC        0.98     GG        1.00*    
!   HN        1.00*    KP        0.91     LA        1.07     MA        1.00*    
!   MK        0.99     NL        0.97     NY        1.00*    ON        1.00*    
!   OV        1.10     PT        0.95     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.08     GC        0.88     GG        1.00*    
!   HN        1.02     KP        1.00     LA        1.13     MA        1.00*    
!   MK        1.00*    NL        0.99     NY        0.84     ON        1.04     
!   OV        1.09     PT        1.02     SC        0.90     TC        1.00*    
!   TS        1.07     WF        0.87     WZ        1.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.00*    GC        0.87     GG        1.00*    
!   HN        1.09     KP        1.05     LA        1.19     MA        1.00*    
!   MK        1.00*    NL        1.04     NY        0.84     ON        1.00*    
!   OV        1.63     PT        1.02     SC        1.00*    TC        1.00*    
!   TS        1.10     WF        0.91     WZ        1.00*    
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.22     FD        1.22     GC        0.91     GG        1.00*    
!   HN        1.01     KP        1.15     LA        1.24     MA        1.00*    
!   MK        1.00*    NL        1.09     NY        0.89     ON        1.00*    
!   OV        1.06     PT        1.10     SC        0.93     TC        1.00*    
!   TS        1.00     WF        0.92     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00     FD        1.02     GC        0.86     GG        1.00*    
!   HN        0.98     KP        0.96     LA        1.06     MA        1.00*    
!   MK        1.04     NL        1.01     NY        0.85     ON        1.04     
!   OV        0.98     PT        0.96     SC        1.00*    TC        1.00*    
!   TS        1.02     WF        1.00*    WZ        0.97     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.03     FD        1.04     GC        0.91     GG        1.00*    
!   HN        1.00*    KP        0.94     LA        1.05     MA        1.00*    
!   MK        0.95     NL        0.99     NY        1.00*    ON        1.00*    
!   OV        1.14     PT        0.96     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.55     FD        1.02     GC        1.14     GG        1.00*    
!   HN        1.03     KP        1.01     LA        0.91     MA        0.99     
!   MK        1.00*    NL        1.03     NY        0.82     ON        1.29     
!   OV        1.13     PT        1.06     SC        0.98     TC        1.00*    
!   TS        1.10     WF        0.90     WZ        1.00*    
! 
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.86     FD        1.00*    GC        1.07     GG        1.00*    
!   HN        1.13     KP        1.07     LA        0.99     MA        1.00*    
!   MK        1.00*    NL        1.07     NY        0.82     ON        1.00*    
!   OV        2.16     PT        1.10     SC        1.00*    TC        1.00*    
!   TS        1.15     WF        0.92     WZ        1.00*    
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     FD        1.12     GC        1.15     GG        1.00*    
!   HN        1.03     KP        1.11     LA        1.01     MA        1.00*    
!   MK        1.00*    NL        1.10     NY        0.89     ON        1.00*    
!   OV        1.01     PT        1.11     SC        1.25     TC        1.00*    
!   TS        1.02     WF        0.92     WZ        1.00*    
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.25     FD        0.97     GC        1.10     GG        1.00*    
!   HN        0.96     KP        0.94     LA        0.88     MA        1.03     
!   MK        1.01     NL        1.03     NY        0.83     ON        1.18     
!   OV        1.00     PT        1.01     SC        1.00*    TC        1.00*    
!   TS        1.04     WF        1.00*    WZ        0.98     
! 
!  A total of 69 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.99     FD        0.96     GC        1.08     GG        1.00*    
!   HN        1.00*    KP        0.93     LA        0.87     MA        1.00*    
!   MK        0.96     NL        1.05     NY        1.00*    ON        1.00*    
!   OV        1.27     PT        1.01     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.57     FD        0.92     GC        1.16     GG        1.00*    
!   HN        0.96     KP        0.99     LA        0.74     MA        1.47     
!   MK        1.00*    NL        0.95     NY        0.72     ON        1.22     
!   OV        0.99     PT        1.02     SC        1.06     TC        1.00*    
!   TS        1.10     WF        0.87     WZ        1.00*    
! 
!  A total of 57 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        1.00*    GC        1.18     GG        1.00*    
!   HN        1.12     KP        1.05     LA        0.75     MA        1.00*    
!   MK        1.00*    NL        1.12     NY        0.77     ON        1.00*    
!   OV        2.64     PT        0.95     SC        1.00*    TC        1.00*    
!   TS        1.04     WF        0.89     WZ        1.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.22     FD        1.03     GC        1.20     GG        1.00*    
!   HN        1.01     KP        1.03     LA        0.82     MA        1.00*    
!   MK        1.00*    NL        1.04     NY        0.83     ON        1.00*    
!   OV        0.92     PT        1.09     SC        1.27     TC        1.00*    
!   TS        1.00     WF        0.88     WZ        1.00*    
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.68     FD        0.87     GC        1.14     GG        1.00*    
!   HN        1.01     KP        0.95     LA        0.69     MA        1.84     
!   MK        0.96     NL        0.96     NY        0.77     ON        1.39     
!   OV        0.85     PT        0.96     SC        1.00*    TC        1.00*    
!   TS        1.02     WF        1.00*    WZ        0.98     
! 
!  A total of 60 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.00*    FD        0.00*    GC        0.00*    GG        0.00*    
!   HN        0.00*    KP        0.00*    LA        0.00*    MA        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TC        0.00*    
!   TS        0.00*    WF        0.00*    WZ        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.82     FD        0.89     GC        1.15     GG        1.00*    
!   HN        1.00*    KP        0.93     LA        0.72     MA        1.00*    
!   MK        0.88     NL        0.96     NY        1.00*    ON        1.00*    
!   OV        1.17     PT        0.93     SC        1.00*    TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.321926Jy  sigma=0.001860
! Fit after  self-cal, rms=0.300990Jy  sigma=0.001489
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=3.276 mas, bpa=-3.02 degrees
! Estimated noise=415.317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526071 Jy
! Component: 100  -  total flux cleaned = 0.00560282 Jy
! Component: 150  -  total flux cleaned = 0.00653863 Jy
! Component: 200  -  total flux cleaned = 0.00710888 Jy
! Total flux subtracted in 200 components = 0.00710888 Jy
! Clean residual min=-0.003757 max=0.004816 Jy/beam
! Clean residual mean=0.000357 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.70631 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.70631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.300659Jy  sigma=0.001487
! Fit after  self-cal, rms=0.301564Jy  sigma=0.001484
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.301564Jy  sigma=0.001484
! Fit after  self-cal, rms=0.296320Jy  sigma=0.001459
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.459 mas, bmaj=3.273 mas, bpa=-3.036 degrees
! Estimated noise=416.379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038655 Jy
! Component: 100  -  total flux cleaned = 0.00448664 Jy
! Component: 150  -  total flux cleaned = 0.00490289 Jy
! Component: 200  -  total flux cleaned = 0.00533303 Jy
! Total flux subtracted in 200 components = 0.00533303 Jy
! Clean residual min=-0.002961 max=0.003905 Jy/beam
! Clean residual mean=0.000249 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.711643 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 56 components and 0.711643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296188Jy  sigma=0.001459
! Fit after  self-cal, rms=0.296199Jy  sigma=0.001458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24, -50).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035739 Jy
! Component: 100  -  total flux cleaned = 0.00449958 Jy
! Component: 150  -  total flux cleaned = 0.00480872 Jy
! Component: 200  -  total flux cleaned = 0.00515257 Jy
! Total flux subtracted in 200 components = 0.00515257 Jy
! Clean residual min=-0.002943 max=0.003507 Jy/beam
! Clean residual mean=0.000206 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.716796 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 73 components and 0.716796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296120Jy  sigma=0.001458
! Fit after  self-cal, rms=0.296117Jy  sigma=0.001458
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296117Jy  sigma=0.001458
! Fit after  self-cal, rms=0.296681Jy  sigma=0.001442
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.464 mas, bmaj=3.271 mas, bpa=-3.109 degrees
! Estimated noise=416.927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169703 Jy
! Component: 100  -  total flux cleaned = 0.00223068 Jy
! Component: 150  -  total flux cleaned = 0.00253155 Jy
! Component: 200  -  total flux cleaned = 0.00272876 Jy
! Total flux subtracted in 200 components = 0.00272876 Jy
! Clean residual min=-0.002451 max=0.002461 Jy/beam
! Clean residual mean=0.000141 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.719524 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.719524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296620Jy  sigma=0.001441
! Fit after  self-cal, rms=0.296698Jy  sigma=0.001441
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445078 Jy
! Component: 100  -  total flux cleaned = 0.000449443 Jy
! Component: 150  -  total flux cleaned = 0.000402213 Jy
! Component: 200  -  total flux cleaned = 0.000403152 Jy
! Total flux subtracted in 200 components = 0.000403152 Jy
! Clean residual min=-0.002374 max=0.002463 Jy/beam
! Clean residual mean=0.000138 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.719927 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 0.719927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296674Jy  sigma=0.001441
! Fit after  self-cal, rms=0.296674Jy  sigma=0.001441
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296674Jy  sigma=0.001441
! Fit after  self-cal, rms=0.297380Jy  sigma=0.001441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.167 mas, bmaj=9.73 mas, bpa=-72.26 degrees
! Estimated noise=574.74 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191857 Jy
! Component: 100  -  total flux cleaned = 0.0021402 Jy
! Component: 150  -  total flux cleaned = 0.00224688 Jy
! Component: 200  -  total flux cleaned = 0.00224683 Jy
! Total flux subtracted in 200 components = 0.00224683 Jy
! Clean residual min=-0.002616 max=0.003296 Jy/beam
! Clean residual mean=0.000305 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.722174 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 101 components and 0.722174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.297376Jy  sigma=0.001441
! Fit after  self-cal, rms=0.297376Jy  sigma=0.001441
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110765 Jy
! Component: 100  -  total flux cleaned = 0.000177836 Jy
! Component: 150  -  total flux cleaned = 0.000178468 Jy
! Component: 200  -  total flux cleaned = 0.000179003 Jy
! Total flux subtracted in 200 components = 0.000179003 Jy
! Clean residual min=-0.002680 max=0.003257 Jy/beam
! Clean residual mean=0.000302 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.722353 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 106 components and 0.722353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.297380Jy  sigma=0.001441
! Fit after  self-cal, rms=0.297380Jy  sigma=0.001441
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.468 mas, bmaj=3.27 mas, bpa=-3.149 degrees
! Estimated noise=417.659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.468 x 3.27 at -3.149 degrees (North through East)
! Clean map  min=-0.0020852  max=0.66035 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.297380Jy  sigma=0.001441
! Fit after  self-cal, rms=0.334099Jy  sigma=0.001289
! Inverting map and beam 
! Estimated beam: bmin=2.471 mas, bmaj=3.274 mas, bpa=-2.82 degrees
! Estimated noise=416.945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178298 Jy
! Component: 100  -  total flux cleaned = -0.00212691 Jy
! Component: 150  -  total flux cleaned = -0.00242276 Jy
! Component: 200  -  total flux cleaned = -0.0025097 Jy
! Total flux subtracted in 200 components = -0.0025097 Jy
! Clean residual min=-0.001902 max=0.002227 Jy/beam
! Clean residual mean=0.000109 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.719843 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 112 components and 0.719843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334069Jy  sigma=0.001289
! Fit after  self-cal, rms=0.334089Jy  sigma=0.001289
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.33667e-06 Jy
! Component: 100  -  total flux cleaned = -4.96638e-06 Jy
! Component: 150  -  total flux cleaned = -5.05703e-06 Jy
! Component: 200  -  total flux cleaned = -5.77811e-06 Jy
! Total flux subtracted in 200 components = -5.77811e-06 Jy
! Clean residual min=-0.001906 max=0.002191 Jy/beam
! Clean residual mean=0.000109 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.719838 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.719838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334078Jy  sigma=0.001289
! Fit after  self-cal, rms=0.334080Jy  sigma=0.001289
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334080Jy  sigma=0.001289
! Fit after  self-cal, rms=0.333254Jy  sigma=0.001289
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.921 mas, bmaj=2.723 mas, bpa=-4.695 degrees
! Estimated noise=815.194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.506691 Jy
! Component: 100  -  total flux cleaned = 0.617362 Jy
! Component: 150  -  total flux cleaned = 0.649379 Jy
! Component: 200  -  total flux cleaned = 0.667048 Jy
! Total flux subtracted in 200 components = 0.667048 Jy
! Clean residual min=-0.004571 max=0.009713 Jy/beam
! Clean residual mean=0.000000 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.667047 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.667047 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.477 mas, bmaj=3.275 mas, bpa=-2.771 degrees
! Estimated noise=416.941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198167 Jy
! Component: 100  -  total flux cleaned = 0.030832 Jy
! Component: 150  -  total flux cleaned = 0.0374373 Jy
! Component: 200  -  total flux cleaned = 0.0417395 Jy
! Total flux subtracted in 200 components = 0.0417395 Jy
! Clean residual min=-0.001879 max=0.002604 Jy/beam
! Clean residual mean=0.000199 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.708787 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 48 components and 0.708787 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.164 mas, bmaj=9.729 mas, bpa=-72.39 degrees
! Estimated noise=572.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00447562 Jy
! Component: 100  -  total flux cleaned = 0.00698547 Jy
! Component: 150  -  total flux cleaned = 0.00859193 Jy
! Component: 200  -  total flux cleaned = 0.0096383 Jy
! Total flux subtracted in 200 components = 0.0096383 Jy
! Clean residual min=-0.002294 max=0.002847 Jy/beam
! Clean residual mean=0.000301 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.718425 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278203 Jy
! Component: 100  -  total flux cleaned = 0.000488238 Jy
! Component: 150  -  total flux cleaned = 0.000578642 Jy
! Component: 200  -  total flux cleaned = 0.00061951 Jy
! Total flux subtracted in 200 components = 0.00061951 Jy
! Clean residual min=-0.002323 max=0.002770 Jy/beam
! Clean residual mean=0.000285 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.719045 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 76 components and 0.719045 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.477 mas, bmaj=3.275 mas, bpa=-2.771 degrees
! Estimated noise=416.941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000272764 Jy
! Component: 100  -  total flux cleaned = -0.000267611 Jy
! Component: 150  -  total flux cleaned = -0.000264561 Jy
! Component: 200  -  total flux cleaned = -0.00021041 Jy
! Total flux subtracted in 200 components = -0.00021041 Jy
! Clean residual min=-0.001839 max=0.002176 Jy/beam
! Clean residual mean=0.000100 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.718834 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 88 components and 0.718834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333246Jy  sigma=0.001289
! Fit after  self-cal, rms=0.333291Jy  sigma=0.001289
wmodel J1302+5748_S_2003_07_09_pus_map.mod
! Writing 88 model components to file: J1302+5748_S_2003_07_09_pus_map.mod
wobs J1302+5748_S_2003_07_09_pus_uvs.fits
! Writing UV FITS file: J1302+5748_S_2003_07_09_pus_uvs.fits
wwins J1302+5748_S_2003_07_09_pus_map.win
! wwins: Wrote 3 windows to J1302+5748_S_2003_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985817 Jy
! Component: 100  -  total flux cleaned = 0.00168745 Jy
! Component: 150  -  total flux cleaned = 0.0022207 Jy
! Component: 200  -  total flux cleaned = 0.00259917 Jy
! Component: 250  -  total flux cleaned = 0.00290044 Jy
! Component: 300  -  total flux cleaned = 0.00326083 Jy
! Component: 350  -  total flux cleaned = 0.00361424 Jy
! Component: 400  -  total flux cleaned = 0.00392973 Jy
! Component: 450  -  total flux cleaned = 0.00420898 Jy
! Component: 500  -  total flux cleaned = 0.00448426 Jy
! Component: 550  -  total flux cleaned = 0.00475607 Jy
! Component: 600  -  total flux cleaned = 0.00499448 Jy
! Component: 650  -  total flux cleaned = 0.00525934 Jy
! Component: 700  -  total flux cleaned = 0.00543353 Jy
! Component: 750  -  total flux cleaned = 0.00560617 Jy
! Component: 800  -  total flux cleaned = 0.00580539 Jy
! Component: 850  -  total flux cleaned = 0.00594632 Jy
! Component: 900  -  total flux cleaned = 0.00605826 Jy
! Component: 950  -  total flux cleaned = 0.00625233 Jy
! Component: 1000  -  total flux cleaned = 0.00633456 Jy
! Component: 1050  -  total flux cleaned = 0.00644356 Jy
! Component: 1100  -  total flux cleaned = 0.00649772 Jy
! Component: 1150  -  total flux cleaned = 0.00657847 Jy
! Component: 1200  -  total flux cleaned = 0.00665873 Jy
! Component: 1250  -  total flux cleaned = 0.00673832 Jy
! Component: 1300  -  total flux cleaned = 0.00679093 Jy
! Component: 1350  -  total flux cleaned = 0.00694765 Jy
! Component: 1400  -  total flux cleaned = 0.00702518 Jy
! Component: 1450  -  total flux cleaned = 0.00710235 Jy
! Component: 1500  -  total flux cleaned = 0.00715347 Jy
! Component: 1550  -  total flux cleaned = 0.00722981 Jy
! Component: 1600  -  total flux cleaned = 0.00728055 Jy
! Component: 1650  -  total flux cleaned = 0.00735604 Jy
! Component: 1700  -  total flux cleaned = 0.00743104 Jy
! Component: 1750  -  total flux cleaned = 0.00748073 Jy
! Component: 1800  -  total flux cleaned = 0.00753019 Jy
! Component: 1850  -  total flux cleaned = 0.00755478 Jy
! Component: 1900  -  total flux cleaned = 0.00757919 Jy
! Component: 1950  -  total flux cleaned = 0.00762806 Jy
! Component: 2000  -  total flux cleaned = 0.007628 Jy
! Total flux subtracted in 2048 components = 0.00770035 Jy
! Clean residual min=-0.001361 max=0.001492 Jy/beam
! Clean residual mean=0.000020 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.726535 Jy
keep
! Adding 178 model components to the UV plane model.
! The established model now contains 266 components and 0.726535 Jy
![Exited script file: muppet]
wmap "J1302+5748_S_2003_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.477 x 3.275 at -2.771 degrees (North through East)
! Clean map  min=-0.0016407  max=0.66002 Jy/beam
! Writing clean map to FITS file: J1302+5748_S_2003_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.660023 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000459743 
device "J1302+5748_S_2003_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1302+5748_S_2003_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.208967 0.208967 0.417933 0.835866 1.67173 3.34347 6.68693 13.3739 26.7477 53.4954
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.66 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.477 x 3.275 at -2.771 degrees (North through East)
! Clean map  min=-0.0016407  max=0.66002 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
quit
! Quitting program
! Log file J1302+5748_S_2003_07_09_pus_uvs.log closed on Sun Apr  7 22:23:38 2013