! Started logfile: J1159+2914_S_2003_07_09_pus_uvs.log on Sun Apr 7 22:12:16 2013 obs J1159+2914_S_2003_07_09_pus_uva.fits ! Reading UV FITS file: J1159+2914_S_2003_07_09_pus_uva.fits ! AN table 1: 112 integrations on 171 of 171 possible baselines. ! AN table 2: 172 integrations on 171 of 171 possible baselines. ! AN table 3: 129 integrations on 171 of 171 possible baselines. ! AN table 4: 221 integrations on 171 of 171 possible baselines. ! AN table 5: 33 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0583129 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1159+2914 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1520 lines of history. ! ! Reading 26604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1159+2914_S_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1990 telescope corrections were flagged in sub-array 1. ! A total of 2547 telescope corrections were flagged in sub-array 2. ! A total of 1988 telescope corrections were flagged in sub-array 3. ! A total of 3429 telescope corrections were flagged in sub-array 4. ! A total of 597 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 2001 telescope corrections were flagged in sub-array 1. ! A total of 2594 telescope corrections were flagged in sub-array 2. ! A total of 1994 telescope corrections were flagged in sub-array 3. ! A total of 3622 telescope corrections were flagged in sub-array 4. ! A total of 597 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1993 telescope corrections were flagged in sub-array 1. ! A total of 2550 telescope corrections were flagged in sub-array 2. ! A total of 1983 telescope corrections were flagged in sub-array 3. ! A total of 3426 telescope corrections were flagged in sub-array 4. ! A total of 597 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1996 telescope corrections were flagged in sub-array 1. ! A total of 2515 telescope corrections were flagged in sub-array 2. ! A total of 1984 telescope corrections were flagged in sub-array 3. ! A total of 3466 telescope corrections were flagged in sub-array 4. ! A total of 597 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.926060Jy sigma=0.006237 ! Fit after self-cal, rms=0.420018Jy sigma=0.002871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.945 mas, bmaj=3.666 mas, bpa=4.42 degrees ! Estimated noise=1234.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.837903 Jy ! Component: 100 - total flux cleaned = 1.02867 Jy ! Total flux subtracted in 100 components = 1.02867 Jy ! Clean residual min=-0.028957 max=0.072215 Jy/beam ! Clean residual mean=0.000115 rms=0.008926 Jy/beam ! Combined flux in latest and established models = 1.02867 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.02867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411121Jy sigma=0.002786 ! Fit after self-cal, rms=0.411014Jy sigma=0.002786 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835636 Jy ! Component: 100 - total flux cleaned = 0.137817 Jy ! Total flux subtracted in 100 components = 0.137817 Jy ! Clean residual min=-0.030259 max=0.053964 Jy/beam ! Clean residual mean=0.000134 rms=0.007545 Jy/beam ! Combined flux in latest and established models = 1.16649 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 1.16649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379991Jy sigma=0.002468 ! Fit after self-cal, rms=0.379600Jy sigma=0.002467 ! Inverting map ! Added new window around map position (4.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555062 Jy ! Component: 100 - total flux cleaned = 0.093206 Jy ! Total flux subtracted in 100 components = 0.093206 Jy ! Clean residual min=-0.028358 max=0.039055 Jy/beam ! Clean residual mean=0.000136 rms=0.006819 Jy/beam ! Combined flux in latest and established models = 1.2597 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 1.2597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364971Jy sigma=0.002302 ! Fit after self-cal, rms=0.364011Jy sigma=0.002297 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=4.355 mas, bpa=1.047 degrees ! Estimated noise=681.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0786989 Jy ! Component: 100 - total flux cleaned = 0.132858 Jy ! Component: 150 - total flux cleaned = 0.173719 Jy ! Component: 200 - total flux cleaned = 0.205433 Jy ! Total flux subtracted in 200 components = 0.205433 Jy ! Clean residual min=-0.020131 max=0.034227 Jy/beam ! Clean residual mean=0.004283 rms=0.006590 Jy/beam ! Combined flux in latest and established models = 1.46513 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 98 components and 1.46513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344002Jy sigma=0.002071 ! Fit after self-cal, rms=0.342720Jy sigma=0.002060 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 0.98 GG 1.00* ! HN 0.90 KP 1.00* LA 1.00* MA 1.10 ! MK 1.00* NL 1.02 NY 1.26 ON 1.30 ! OV 1.00* PT 1.00* SC 0.73 TC 1.00* ! TS 1.00* WF 0.78 WZ 1.01 ! ! A total of 150 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.11 GC 0.99 GG 1.00* ! HN 1.15 KP 0.93 LA 1.06 MA 2.92 ! MK 0.99 NL 0.99 NY 1.22 ON 1.39 ! OV 0.86 PT 0.94 SC 1.00* TC 1.00* ! TS 0.98 WF 0.98 WZ 1.08 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* GC 1.03 GG 1.00* ! HN 0.86 KP 0.90 LA 1.17 MA 0.96 ! MK 1.00* NL 0.89 NY 1.16 ON 1.24 ! OV 1.13 PT 1.00 SC 0.85 TC 1.00* ! TS 1.13 WF 0.79 WZ 1.17 ! ! A total of 174 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.10 GC 1.03 GG 1.00* ! HN 0.97 KP 0.82 LA 1.14 MA 1.03 ! MK 0.93 NL 0.97 NY 1.25 ON 1.24 ! OV 1.15 PT 0.99 SC 0.87 TC 1.00* ! TS 1.07 WF 0.90 WZ 0.99 ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 0.84 GG 1.00* ! HN 0.95 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.04 NY 0.85 ON 1.10 ! OV 1.00* PT 1.00* SC 0.81 TC 1.00* ! TS 1.00* WF 0.81 WZ 1.13 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 GC 0.89 GG 1.00* ! HN 1.21 KP 0.95 LA 1.02 MA 1.00* ! MK 1.01 NL 1.03 NY 0.94 ON 1.03 ! OV 0.94 PT 0.94 SC 1.00* TC 1.00* ! TS 0.99 WF 1.01 WZ 1.13 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.00* GC 0.95 GG 1.00* ! HN 0.94 KP 0.98 LA 1.10 MA 1.00* ! MK 1.00* NL 0.95 NY 0.89 ON 1.05 ! OV 1.10 PT 1.01 SC 0.88 TC 1.00* ! TS 1.12 WF 0.88 WZ 1.14 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.03 GC 0.94 GG 1.00* ! HN 1.03 KP 0.93 LA 1.09 MA 1.00* ! MK 0.97 NL 1.00 NY 0.92 ON 0.99 ! OV 1.06 PT 0.97 SC 0.91 TC 1.00* ! TS 1.04 WF 0.89 WZ 1.00 ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.01 GG 1.00* ! HN 0.99 KP 1.00* LA 1.00* MA 1.12 ! MK 1.00* NL 1.09 NY 0.86 ON 1.20 ! OV 1.00* PT 1.00* SC 0.79 TC 1.00* ! TS 1.00* WF 0.82 WZ 1.14 ! ! A total of 69 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.96 GC 1.11 GG 1.00* ! HN 1.94 KP 0.92 LA 0.85 MA 1.15 ! MK 0.97 NL 1.05 NY 0.92 ON 1.55 ! OV 0.93 PT 0.97 SC 1.00* TC 1.00* ! TS 1.02 WF 1.00 WZ 1.07 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.20 FD 1.00* GC 1.18 GG 1.00* ! HN 0.92 KP 1.00 LA 0.90 MA 0.91 ! MK 1.00* NL 0.96 NY 0.86 ON 1.34 ! OV 1.11 PT 1.04 SC 0.99 TC 1.00* ! TS 1.15 WF 0.85 WZ 1.17 ! ! A total of 168 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.19 FD 0.97 GC 1.15 GG 1.00* ! HN 1.03 KP 0.92 LA 0.90 MA 1.07 ! MK 0.93 NL 1.02 NY 0.91 ON 1.34 ! OV 1.06 PT 1.01 SC 1.06 TC 1.00* ! TS 1.09 WF 0.90 WZ 1.03 ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.11 GG 1.00* ! HN 0.86 KP 1.00* LA 1.00* MA 0.94 ! MK 1.00* NL 1.02 NY 0.80 ON 1.23 ! OV 1.00* PT 1.00* SC 0.88 TC 1.00* ! TS 1.00* WF 0.84 WZ 1.10 ! ! A total of 84 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 0.86 GC 1.15 GG 1.00* ! HN 1.15 KP 0.92 LA 0.69 MA 1.31 ! MK 0.91 NL 0.97 NY 0.88 ON 1.40 ! OV 0.80 PT 0.95 SC 1.00* TC 1.00* ! TS 1.01 WF 1.01 WZ 1.07 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.25 FD 1.00* GC 1.19 GG 1.00* ! HN 0.92 KP 0.99 LA 0.73 MA 0.66 ! MK 1.00* NL 0.90 NY 0.80 ON 1.27 ! OV 0.92 PT 0.99 SC 1.00 TC 1.00* ! TS 1.14 WF 0.83 WZ 1.18 ! ! A total of 201 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.19 FD 0.87 GC 1.21 GG 1.00* ! HN 1.02 KP 0.92 LA 0.74 MA 1.13 ! MK 0.88 NL 0.95 NY 0.88 ON 1.24 ! OV 0.97 PT 0.97 SC 1.04 TC 1.00* ! TS 1.06 WF 0.88 WZ 1.00 ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.342720Jy sigma=0.002060 ! Fit after self-cal, rms=0.273232Jy sigma=0.001466 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=4.289 mas, bpa=1.216 degrees ! Estimated noise=681.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127343 Jy ! Component: 100 - total flux cleaned = 0.0153725 Jy ! Component: 150 - total flux cleaned = 0.0179513 Jy ! Component: 200 - total flux cleaned = 0.0204308 Jy ! Total flux subtracted in 200 components = 0.0204308 Jy ! Clean residual min=-0.007139 max=0.011448 Jy/beam ! Clean residual mean=0.001044 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 1.48556 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 1.48556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271127Jy sigma=0.001446 ! Fit after self-cal, rms=0.271183Jy sigma=0.001443 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271183Jy sigma=0.001443 ! Fit after self-cal, rms=0.256841Jy sigma=0.001397 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=4.299 mas, bpa=1.287 degrees ! Estimated noise=681.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715519 Jy ! Component: 100 - total flux cleaned = 0.00773846 Jy ! Component: 150 - total flux cleaned = 0.00847722 Jy ! Component: 200 - total flux cleaned = 0.0087001 Jy ! Total flux subtracted in 200 components = 0.0087001 Jy ! Clean residual min=-0.005121 max=0.009018 Jy/beam ! Clean residual mean=0.000617 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 1.49426 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 141 components and 1.49426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256228Jy sigma=0.001391 ! Fit after self-cal, rms=0.256072Jy sigma=0.001390 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080777 Jy ! Component: 100 - total flux cleaned = 0.00906086 Jy ! Component: 150 - total flux cleaned = 0.00905079 Jy ! Component: 200 - total flux cleaned = 0.00943271 Jy ! Total flux subtracted in 200 components = 0.00943271 Jy ! Clean residual min=-0.004879 max=0.007556 Jy/beam ! Clean residual mean=0.000522 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 1.50369 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 158 components and 1.50369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255594Jy sigma=0.001386 ! Fit after self-cal, rms=0.255568Jy sigma=0.001385 ! Inverting map ! Added new window around map position (-1.5, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678324 Jy ! Component: 100 - total flux cleaned = 0.00875115 Jy ! Component: 150 - total flux cleaned = 0.00981518 Jy ! Component: 200 - total flux cleaned = 0.0106341 Jy ! Total flux subtracted in 200 components = 0.0106341 Jy ! Clean residual min=-0.004992 max=0.005958 Jy/beam ! Clean residual mean=0.000414 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 1.51433 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 175 components and 1.51433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255304Jy sigma=0.001382 ! Fit after self-cal, rms=0.255287Jy sigma=0.001382 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255287Jy sigma=0.001382 ! Fit after self-cal, rms=0.253714Jy sigma=0.001380 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.305 mas, bmaj=4.295 mas, bpa=1.286 degrees ! Estimated noise=680.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246602 Jy ! Component: 100 - total flux cleaned = 0.00431399 Jy ! Component: 150 - total flux cleaned = 0.00564345 Jy ! Component: 200 - total flux cleaned = 0.0065622 Jy ! Total flux subtracted in 200 components = 0.0065622 Jy ! Clean residual min=-0.004478 max=0.005477 Jy/beam ! Clean residual mean=0.000371 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 1.52089 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 190 components and 1.52089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253491Jy sigma=0.001377 ! Fit after self-cal, rms=0.253452Jy sigma=0.001377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193578 Jy ! Component: 100 - total flux cleaned = 0.00264519 Jy ! Component: 150 - total flux cleaned = 0.00331635 Jy ! Component: 200 - total flux cleaned = 0.00407715 Jy ! Total flux subtracted in 200 components = 0.00407715 Jy ! Clean residual min=-0.004389 max=0.005249 Jy/beam ! Clean residual mean=0.000329 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 1.52497 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 199 components and 1.52497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253307Jy sigma=0.001376 ! Fit after self-cal, rms=0.253300Jy sigma=0.001376 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253300Jy sigma=0.001376 ! Fit after self-cal, rms=0.252768Jy sigma=0.001376 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.848 mas, bmaj=9.054 mas, bpa=-5.917 degrees ! Estimated noise=964.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777082 Jy ! Component: 100 - total flux cleaned = 0.0128158 Jy ! Component: 150 - total flux cleaned = 0.0148915 Jy ! Component: 200 - total flux cleaned = 0.0162987 Jy ! Total flux subtracted in 200 components = 0.0162987 Jy ! Clean residual min=-0.004843 max=0.006514 Jy/beam ! Clean residual mean=0.000564 rms=0.001924 Jy/beam ! Combined flux in latest and established models = 1.54127 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 223 components and 1.54127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252739Jy sigma=0.001375 ! Fit after self-cal, rms=0.252711Jy sigma=0.001375 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167541 Jy ! Component: 100 - total flux cleaned = 0.00297917 Jy ! Component: 150 - total flux cleaned = 0.00403132 Jy ! Component: 200 - total flux cleaned = 0.00482815 Jy ! Total flux subtracted in 200 components = 0.00482815 Jy ! Clean residual min=-0.004686 max=0.006139 Jy/beam ! Clean residual mean=0.000403 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 1.54609 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 239 components and 1.54609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252724Jy sigma=0.001375 ! Fit after self-cal, rms=0.252720Jy sigma=0.001374 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=4.292 mas, bpa=1.311 degrees ! Estimated noise=680.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.308 x 4.292 at 1.311 degrees (North through East) ! Clean map min=-0.0046103 max=1.1067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252720Jy sigma=0.001374 ! Fit after self-cal, rms=0.220061Jy sigma=0.001154 ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=4.294 mas, bpa=1.362 degrees ! Estimated noise=680.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100093 Jy ! Component: 100 - total flux cleaned = -0.00112707 Jy ! Component: 150 - total flux cleaned = -0.000891357 Jy ! Component: 200 - total flux cleaned = -0.000782787 Jy ! Total flux subtracted in 200 components = -0.000782787 Jy ! Clean residual min=-0.003993 max=0.005110 Jy/beam ! Clean residual mean=0.000194 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 1.54531 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 255 components and 1.54531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219913Jy sigma=0.001152 ! Fit after self-cal, rms=0.219914Jy sigma=0.001152 ! Inverting map ! Added new window around map position (2, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350114 Jy ! Component: 100 - total flux cleaned = 0.00404724 Jy ! Component: 150 - total flux cleaned = 0.00434813 Jy ! Component: 200 - total flux cleaned = 0.00453843 Jy ! Total flux subtracted in 200 components = 0.00453843 Jy ! Clean residual min=-0.003915 max=0.004597 Jy/beam ! Clean residual mean=0.000148 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 1.54985 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 265 components and 1.54985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219754Jy sigma=0.001151 ! Fit after self-cal, rms=0.219742Jy sigma=0.001151 ! Inverting map ! Added new window around map position (-14, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356992 Jy ! Component: 100 - total flux cleaned = 0.00376667 Jy ! Component: 150 - total flux cleaned = 0.00403838 Jy ! Component: 200 - total flux cleaned = 0.00421284 Jy ! Total flux subtracted in 200 components = 0.00421284 Jy ! Clean residual min=-0.003927 max=0.004305 Jy/beam ! Clean residual mean=0.000101 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 1.55406 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 278 components and 1.55406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219625Jy sigma=0.001150 ! Fit after self-cal, rms=0.219620Jy sigma=0.001150 ! Inverting map ! Added new window around map position (5.5, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267291 Jy ! Component: 100 - total flux cleaned = 0.00276753 Jy ! Component: 150 - total flux cleaned = 0.00293782 Jy ! Component: 200 - total flux cleaned = 0.00318099 Jy ! Total flux subtracted in 200 components = 0.00318099 Jy ! Clean residual min=-0.003811 max=0.003831 Jy/beam ! Clean residual mean=0.000070 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.55724 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 295 components and 1.55724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219532Jy sigma=0.001149 ! Fit after self-cal, rms=0.219518Jy sigma=0.001149 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219518Jy sigma=0.001149 ! Fit after self-cal, rms=0.219215Jy sigma=0.001149 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.977 mas, bmaj=3.635 mas, bpa=4.661 degrees ! Estimated noise=1284.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.852208 Jy ! Component: 100 - total flux cleaned = 1.04104 Jy ! Component: 150 - total flux cleaned = 1.12218 Jy ! Component: 200 - total flux cleaned = 1.18165 Jy ! Total flux subtracted in 200 components = 1.18165 Jy ! Clean residual min=-0.011210 max=0.034717 Jy/beam ! Clean residual mean=0.000099 rms=0.004339 Jy/beam ! Combined flux in latest and established models = 1.18165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.18165 Jy ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=4.293 mas, bpa=1.356 degrees ! Estimated noise=680.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.078976 Jy ! Component: 100 - total flux cleaned = 0.134412 Jy ! Component: 150 - total flux cleaned = 0.175875 Jy ! Component: 200 - total flux cleaned = 0.207573 Jy ! Total flux subtracted in 200 components = 0.207573 Jy ! Clean residual min=-0.005333 max=0.018411 Jy/beam ! Clean residual mean=0.001797 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 1.38923 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 96 components and 1.38923 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245252 Jy ! Component: 100 - total flux cleaned = 0.044076 Jy ! Component: 150 - total flux cleaned = 0.060083 Jy ! Component: 200 - total flux cleaned = 0.0734365 Jy ! Total flux subtracted in 200 components = 0.0734365 Jy ! Clean residual min=-0.004019 max=0.008584 Jy/beam ! Clean residual mean=0.001068 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 1.46266 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 163 components and 1.46266 Jy ! Inverting map ! Added new window around map position (0, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114196 Jy ! Component: 100 - total flux cleaned = 0.0212601 Jy ! Component: 150 - total flux cleaned = 0.0298363 Jy ! Component: 200 - total flux cleaned = 0.0373787 Jy ! Total flux subtracted in 200 components = 0.0373787 Jy ! Clean residual min=-0.003585 max=0.005641 Jy/beam ! Clean residual mean=0.000693 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 1.50004 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 207 components and 1.50004 Jy ! Inverting map ! Added new window around map position (15.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685633 Jy ! Component: 100 - total flux cleaned = 0.012896 Jy ! Component: 150 - total flux cleaned = 0.0183116 Jy ! Component: 200 - total flux cleaned = 0.0231924 Jy ! Total flux subtracted in 200 components = 0.0231924 Jy ! Clean residual min=-0.003227 max=0.004164 Jy/beam ! Clean residual mean=0.000458 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 1.52323 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 243 components and 1.52323 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=9.054 mas, bpa=-5.747 degrees ! Estimated noise=963.705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107225 Jy ! Component: 100 - total flux cleaned = 0.0182921 Jy ! Component: 150 - total flux cleaned = 0.0241163 Jy ! Component: 200 - total flux cleaned = 0.0286847 Jy ! Total flux subtracted in 200 components = 0.0286847 Jy ! Clean residual min=-0.003150 max=0.003962 Jy/beam ! Clean residual mean=0.000531 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 1.55192 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361159 Jy ! Component: 100 - total flux cleaned = 0.0065024 Jy ! Component: 150 - total flux cleaned = 0.00882197 Jy ! Component: 200 - total flux cleaned = 0.0106934 Jy ! Total flux subtracted in 200 components = 0.0106934 Jy ! Clean residual min=-0.003324 max=0.003423 Jy/beam ! Clean residual mean=0.000174 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 1.56261 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 358 components and 1.56261 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=4.293 mas, bpa=1.356 degrees ! Estimated noise=680.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156045 Jy ! Component: 100 - total flux cleaned = -0.00155924 Jy ! Component: 150 - total flux cleaned = -0.00156252 Jy ! Component: 200 - total flux cleaned = -0.00133574 Jy ! Total flux subtracted in 200 components = -0.00133574 Jy ! Clean residual min=-0.003057 max=0.003240 Jy/beam ! Clean residual mean=0.000069 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 1.56127 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 379 components and 1.56127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218922Jy sigma=0.001146 ! Fit after self-cal, rms=0.218897Jy sigma=0.001146 wmodel J1159+2914_S_2003_07_09_pus_map.mod ! Writing 379 model components to file: J1159+2914_S_2003_07_09_pus_map.mod wobs J1159+2914_S_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J1159+2914_S_2003_07_09_pus_uvs.fits wwins J1159+2914_S_2003_07_09_pus_map.win ! wwins: Wrote 11 windows to J1159+2914_S_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232582 Jy ! Component: 100 - total flux cleaned = -0.000234148 Jy ! Component: 150 - total flux cleaned = -0.000132598 Jy ! Component: 200 - total flux cleaned = -8.27744e-05 Jy ! Component: 250 - total flux cleaned = -0.000179727 Jy ! Component: 300 - total flux cleaned = -0.000132582 Jy ! Component: 350 - total flux cleaned = -0.000227103 Jy ! Component: 400 - total flux cleaned = -0.000273059 Jy ! Component: 450 - total flux cleaned = -0.000227307 Jy ! Component: 500 - total flux cleaned = -0.00022705 Jy ! Component: 550 - total flux cleaned = -0.000138418 Jy ! Component: 600 - total flux cleaned = -5.1452e-05 Jy ! Component: 650 - total flux cleaned = 3.46759e-05 Jy ! Component: 700 - total flux cleaned = 0.000161615 Jy ! Component: 750 - total flux cleaned = 0.000245003 Jy ! Component: 800 - total flux cleaned = 0.000327766 Jy ! Component: 850 - total flux cleaned = 0.000409215 Jy ! Component: 900 - total flux cleaned = 0.000530769 Jy ! Component: 950 - total flux cleaned = 0.000570645 Jy ! Component: 1000 - total flux cleaned = 0.000649976 Jy ! Component: 1050 - total flux cleaned = 0.000689228 Jy ! Component: 1100 - total flux cleaned = 0.000728401 Jy ! Component: 1150 - total flux cleaned = 0.000844178 Jy ! Component: 1200 - total flux cleaned = 0.000920222 Jy ! Component: 1250 - total flux cleaned = 0.000995828 Jy ! Component: 1300 - total flux cleaned = 0.000958542 Jy ! Component: 1350 - total flux cleaned = 0.00110791 Jy ! Component: 1400 - total flux cleaned = 0.00114474 Jy ! Component: 1450 - total flux cleaned = 0.00118161 Jy ! Component: 1500 - total flux cleaned = 0.00121781 Jy ! Component: 1550 - total flux cleaned = 0.00121779 Jy ! Component: 1600 - total flux cleaned = 0.00128938 Jy ! Component: 1650 - total flux cleaned = 0.00132501 Jy ! Component: 1700 - total flux cleaned = 0.00139577 Jy ! Component: 1750 - total flux cleaned = 0.00146601 Jy ! Component: 1800 - total flux cleaned = 0.00150092 Jy ! Component: 1850 - total flux cleaned = 0.00160465 Jy ! Component: 1900 - total flux cleaned = 0.00167316 Jy ! Component: 1950 - total flux cleaned = 0.0017411 Jy ! Component: 2000 - total flux cleaned = 0.00180879 Jy ! Total flux subtracted in 2048 components = 0.00184258 Jy ! Clean residual min=-0.001676 max=0.001974 Jy/beam ! Clean residual mean=0.000050 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 1.56312 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 529 components and 1.56312 Jy ![Exited script file: muppet] wmap "J1159+2914_S_2003_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.311 x 4.293 at 1.356 degrees (North through East) ! Clean map min=-0.0028307 max=1.1081 Jy/beam ! Writing clean map to FITS file: J1159+2914_S_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10805 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000651536 device "J1159+2914_S_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1159+2914_S_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1764 0.1764 0.352801 0.705601 1.4112 2.82241 5.64481 11.2896 22.5792 45.1585 90.317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.311 x 4.293 at 1.356 degrees (North through East) ! Clean map min=-0.0028307 max=1.1081 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1159+2914_S_2003_07_09_pus_uvs.log closed on Sun Apr 7 22:12:34 2013