! Started logfile: J0854+2006_X_2003_07_09_pus_uvs.log on Sun Apr 7 12:31:39 2013 obs J0854+2006_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J0854+2006_X_2003_07_09_pus_uva.fits ! AN table 1: 31 integrations on 171 of 171 possible baselines. ! AN table 2: 99 integrations on 171 of 171 possible baselines. ! AN table 3: 7 integrations on 171 of 171 possible baselines. ! AN table 4: 9 integrations on 171 of 171 possible baselines. ! AN table 5: 60 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0758815 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0854+2006 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 10692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0854+2006_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 565 telescope corrections were flagged in sub-array 1. ! A total of 1408 telescope corrections were flagged in sub-array 2. ! A total of 133 telescope corrections were flagged in sub-array 3. ! A total of 171 telescope corrections were flagged in sub-array 4. ! A total of 894 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 565 telescope corrections were flagged in sub-array 1. ! A total of 1408 telescope corrections were flagged in sub-array 2. ! A total of 133 telescope corrections were flagged in sub-array 3. ! A total of 171 telescope corrections were flagged in sub-array 4. ! A total of 898 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 565 telescope corrections were flagged in sub-array 1. ! A total of 1408 telescope corrections were flagged in sub-array 2. ! A total of 133 telescope corrections were flagged in sub-array 3. ! A total of 171 telescope corrections were flagged in sub-array 4. ! A total of 917 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 565 telescope corrections were flagged in sub-array 1. ! A total of 1408 telescope corrections were flagged in sub-array 2. ! A total of 133 telescope corrections were flagged in sub-array 3. ! A total of 171 telescope corrections were flagged in sub-array 4. ! A total of 918 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.098824Jy sigma=0.009636 ! Fit after self-cal, rms=0.936853Jy sigma=0.008339 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.5659 mas, bmaj=1.035 mas, bpa=6.763 degrees ! Estimated noise=1477.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24797 Jy ! Component: 100 - total flux cleaned = 1.54182 Jy ! Total flux subtracted in 100 components = 1.54182 Jy ! Clean residual min=-0.076212 max=0.181201 Jy/beam ! Clean residual mean=-0.000176 rms=0.019951 Jy/beam ! Combined flux in latest and established models = 1.54182 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.54182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577363Jy sigma=0.005064 ! Fit after self-cal, rms=0.577062Jy sigma=0.005062 ! Inverting map ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Added new window around map position (-1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192285 Jy ! Component: 100 - total flux cleaned = 0.321917 Jy ! Total flux subtracted in 100 components = 0.321917 Jy ! Clean residual min=-0.063052 max=0.095325 Jy/beam ! Clean residual mean=-0.000077 rms=0.014219 Jy/beam ! Combined flux in latest and established models = 1.86374 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 1.86374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437405Jy sigma=0.003776 ! Fit after self-cal, rms=0.431095Jy sigma=0.003723 ! Inverting map ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106729 Jy ! Component: 100 - total flux cleaned = 0.18366 Jy ! Total flux subtracted in 100 components = 0.18366 Jy ! Clean residual min=-0.050213 max=0.072144 Jy/beam ! Clean residual mean=-0.000022 rms=0.011424 Jy/beam ! Combined flux in latest and established models = 2.0474 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 2.0474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363471Jy sigma=0.003105 ! Fit after self-cal, rms=0.361812Jy sigma=0.003091 ! Inverting map ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.696 mas, bmaj=1.25 mas, bpa=1.19 degrees ! Estimated noise=832.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155992 Jy ! Component: 100 - total flux cleaned = 0.254431 Jy ! Component: 150 - total flux cleaned = 0.318774 Jy ! Component: 200 - total flux cleaned = 0.36119 Jy ! Total flux subtracted in 200 components = 0.36119 Jy ! Clean residual min=-0.054896 max=0.069173 Jy/beam ! Clean residual mean=0.000426 rms=0.016619 Jy/beam ! Combined flux in latest and established models = 2.40859 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 2.40859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278354Jy sigma=0.002397 ! Fit after self-cal, rms=0.276125Jy sigma=0.002377 ! Inverting map ! Your choice of large map pixels excluded 3.59% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 GC 1.01 GG 1.00* ! HN 1.00 KP 0.97 LA 1.04 MA 1.00* ! MK 0.97 NL 1.15 NY 0.94 ON 1.00* ! OV 1.05 PT 1.04 SC 1.03 TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HN 1.00* KP 0.92 LA 0.87 MA 1.00* ! MK 0.99 NL 1.00* NY 1.00* ON 1.00* ! OV 0.96 PT 0.88 SC 1.00* TC 1.03 ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 GC 1.05 GG 1.00* ! HN 1.02 KP 0.92 LA 1.04 MA 1.00* ! MK 0.98 NL 1.10 NY 0.97 ON 1.00* ! OV 1.05 PT 1.08 SC 1.00 TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HN 1.00* KP 0.92 LA 0.86 MA 1.00* ! MK 1.00 NL 1.00* NY 1.00* ON 1.00* ! OV 0.95 PT 0.91 SC 1.00* TC 1.04 ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 GC 1.13 GG 1.00* ! HN 1.02 KP 0.85 LA 1.04 MA 1.00* ! MK 0.97 NL 1.08 NY 1.00 ON 1.00* ! OV 1.09 PT 1.10 SC 1.03 TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.97 GC 1.00* GG 1.00* ! HN 1.00* KP 0.91 LA 0.87 MA 1.00* ! MK 1.01 NL 1.00* NY 1.00* ON 1.00* ! OV 0.98 PT 0.88 SC 1.00* TC 1.33 ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 GC 1.17 GG 1.00* ! HN 1.04 KP 0.92 LA 1.03 MA 1.00* ! MK 1.00 NL 1.08 NY 0.98 ON 1.00* ! OV 1.07 PT 1.11 SC 1.08 TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.95 GC 1.00* GG 1.00* ! HN 1.00* KP 0.92 LA 0.85 MA 1.00* ! MK 1.04 NL 1.00* NY 1.00* ON 1.00* ! OV 0.97 PT 0.88 SC 1.00* TC 1.51 ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.276125Jy sigma=0.002377 ! Fit after self-cal, rms=0.169242Jy sigma=0.001404 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7183 mas, bmaj=1.294 mas, bpa=3.369 degrees ! Estimated noise=858.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0211198 Jy ! Component: 100 - total flux cleaned = -0.0225153 Jy ! Component: 150 - total flux cleaned = -0.0241797 Jy ! Component: 200 - total flux cleaned = -0.025478 Jy ! Total flux subtracted in 200 components = -0.025478 Jy ! Clean residual min=-0.016800 max=0.020534 Jy/beam ! Clean residual mean=-0.000021 rms=0.003717 Jy/beam ! Combined flux in latest and established models = 2.38311 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 2.38311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164114Jy sigma=0.001354 ! Fit after self-cal, rms=0.163977Jy sigma=0.001352 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Added new window around map position (-3.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165012 Jy ! Component: 100 - total flux cleaned = 0.0206084 Jy ! Component: 150 - total flux cleaned = 0.0230979 Jy ! Component: 200 - total flux cleaned = 0.0249136 Jy ! Total flux subtracted in 200 components = 0.0249136 Jy ! Clean residual min=-0.014760 max=0.013863 Jy/beam ! Clean residual mean=0.000007 rms=0.003193 Jy/beam ! Combined flux in latest and established models = 2.40802 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 2.40802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161377Jy sigma=0.001325 ! Fit after self-cal, rms=0.161185Jy sigma=0.001323 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161185Jy sigma=0.001323 ! Fit after self-cal, rms=0.160055Jy sigma=0.001307 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7215 mas, bmaj=1.301 mas, bpa=3.108 degrees ! Estimated noise=859.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.011937 Jy ! Component: 100 - total flux cleaned = -0.010952 Jy ! Component: 150 - total flux cleaned = -0.0101482 Jy ! Component: 200 - total flux cleaned = -0.00876938 Jy ! Total flux subtracted in 200 components = -0.00876938 Jy ! Clean residual min=-0.012247 max=0.011872 Jy/beam ! Clean residual mean=0.000011 rms=0.002740 Jy/beam ! Combined flux in latest and established models = 2.39925 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 2.39925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157657Jy sigma=0.001284 ! Fit after self-cal, rms=0.157618Jy sigma=0.001284 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219393 Jy ! Component: 100 - total flux cleaned = 0.00358019 Jy ! Component: 150 - total flux cleaned = 0.00430255 Jy ! Component: 200 - total flux cleaned = 0.00429224 Jy ! Total flux subtracted in 200 components = 0.00429224 Jy ! Clean residual min=-0.011816 max=0.011178 Jy/beam ! Clean residual mean=0.000016 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 2.40355 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 2.40355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156923Jy sigma=0.001277 ! Fit after self-cal, rms=0.156901Jy sigma=0.001277 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156901Jy sigma=0.001277 ! Fit after self-cal, rms=0.156402Jy sigma=0.001268 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7239 mas, bmaj=1.306 mas, bpa=2.907 degrees ! Estimated noise=860.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00779695 Jy ! Component: 100 - total flux cleaned = -0.00885915 Jy ! Component: 150 - total flux cleaned = -0.00883755 Jy ! Component: 200 - total flux cleaned = -0.00907982 Jy ! Total flux subtracted in 200 components = -0.00907982 Jy ! Clean residual min=-0.010798 max=0.010360 Jy/beam ! Clean residual mean=0.000017 rms=0.002387 Jy/beam ! Combined flux in latest and established models = 2.39447 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 2.39447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155263Jy sigma=0.001257 ! Fit after self-cal, rms=0.155246Jy sigma=0.001257 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164425 Jy ! Component: 100 - total flux cleaned = 0.00036237 Jy ! Component: 150 - total flux cleaned = 0.000358813 Jy ! Component: 200 - total flux cleaned = 0.000188063 Jy ! Total flux subtracted in 200 components = 0.000188063 Jy ! Clean residual min=-0.010740 max=0.009915 Jy/beam ! Clean residual mean=0.000017 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 2.39465 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 2.39465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154888Jy sigma=0.001254 ! Fit after self-cal, rms=0.154871Jy sigma=0.001254 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154871Jy sigma=0.001254 ! Fit after self-cal, rms=0.154714Jy sigma=0.001248 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=2.387 mas, bmaj=3.105 mas, bpa=5.934 degrees ! Estimated noise=1160.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335191 Jy ! Component: 100 - total flux cleaned = -0.00347138 Jy ! Component: 150 - total flux cleaned = -0.00358545 Jy ! Component: 200 - total flux cleaned = -0.00378391 Jy ! Total flux subtracted in 200 components = -0.00378391 Jy ! Clean residual min=-0.007461 max=0.006860 Jy/beam ! Clean residual mean=0.000058 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 2.39087 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 2.39087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154443Jy sigma=0.001246 ! Fit after self-cal, rms=0.154434Jy sigma=0.001245 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.73945e-05 Jy ! Component: 100 - total flux cleaned = 0.000175312 Jy ! Component: 150 - total flux cleaned = 0.000263705 Jy ! Component: 200 - total flux cleaned = 0.00011061 Jy ! Total flux subtracted in 200 components = 0.00011061 Jy ! Clean residual min=-0.007409 max=0.006731 Jy/beam ! Clean residual mean=0.000058 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 2.39098 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 2.39098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154552Jy sigma=0.001247 ! Fit after self-cal, rms=0.154553Jy sigma=0.001247 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7258 mas, bmaj=1.311 mas, bpa=2.763 degrees ! Estimated noise=861.879 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7258 x 1.311 at 2.763 degrees (North through East) ! Clean map min=-0.0085711 max=1.6762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154553Jy sigma=0.001247 ! Fit after self-cal, rms=0.142430Jy sigma=0.001151 ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7258 mas, bmaj=1.313 mas, bpa=2.714 degrees ! Estimated noise=860.748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00613338 Jy ! Component: 100 - total flux cleaned = -0.00744501 Jy ! Component: 150 - total flux cleaned = -0.00832037 Jy ! Component: 200 - total flux cleaned = -0.00888656 Jy ! Total flux subtracted in 200 components = -0.00888656 Jy ! Clean residual min=-0.009155 max=0.009041 Jy/beam ! Clean residual mean=0.000020 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 2.38209 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 2.38209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141761Jy sigma=0.001145 ! Fit after self-cal, rms=0.141719Jy sigma=0.001145 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00070948 Jy ! Component: 100 - total flux cleaned = -0.00149281 Jy ! Component: 150 - total flux cleaned = -0.0020486 Jy ! Component: 200 - total flux cleaned = -0.00217862 Jy ! Total flux subtracted in 200 components = -0.00217862 Jy ! Clean residual min=-0.009113 max=0.008741 Jy/beam ! Clean residual mean=0.000018 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 2.37991 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 2.37992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141504Jy sigma=0.001143 ! Fit after self-cal, rms=0.141488Jy sigma=0.001143 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141488Jy sigma=0.001143 ! Fit after self-cal, rms=0.141517Jy sigma=0.001139 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.5863 mas, bmaj=1.054 mas, bpa=5.374 degrees ! Estimated noise=1633.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.30835 Jy ! Component: 100 - total flux cleaned = 1.64991 Jy ! Component: 150 - total flux cleaned = 1.83378 Jy ! Component: 200 - total flux cleaned = 1.95503 Jy ! Total flux subtracted in 200 components = 1.95503 Jy ! Clean residual min=-0.024501 max=0.067010 Jy/beam ! Clean residual mean=-0.000127 rms=0.008846 Jy/beam ! Combined flux in latest and established models = 1.95503 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.95503 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7274 mas, bmaj=1.316 mas, bpa=2.644 degrees ! Estimated noise=861.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149523 Jy ! Component: 100 - total flux cleaned = 0.235184 Jy ! Component: 150 - total flux cleaned = 0.286689 Jy ! Component: 200 - total flux cleaned = 0.320428 Jy ! Total flux subtracted in 200 components = 0.320428 Jy ! Clean residual min=-0.012749 max=0.031822 Jy/beam ! Clean residual mean=-0.000075 rms=0.004299 Jy/beam ! Combined flux in latest and established models = 2.27546 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 2.27546 Jy ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Added new window around map position (-2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301062 Jy ! Component: 100 - total flux cleaned = 0.0463281 Jy ! Component: 150 - total flux cleaned = 0.0582334 Jy ! Component: 200 - total flux cleaned = 0.0673344 Jy ! Total flux subtracted in 200 components = 0.0673344 Jy ! Clean residual min=-0.009617 max=0.012881 Jy/beam ! Clean residual mean=-0.000011 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 2.34279 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 66 components and 2.34279 Jy ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Added new window around map position (0.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111036 Jy ! Component: 100 - total flux cleaned = 0.0178837 Jy ! Component: 150 - total flux cleaned = 0.023127 Jy ! Component: 200 - total flux cleaned = 0.026542 Jy ! Total flux subtracted in 200 components = 0.026542 Jy ! Clean residual min=-0.008030 max=0.007963 Jy/beam ! Clean residual mean=0.000015 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 2.36933 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 2.36933 Jy ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=2.39 mas, bmaj=3.111 mas, bpa=5.828 degrees ! Estimated noise=1154.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036871 Jy ! Component: 100 - total flux cleaned = 0.00463101 Jy ! Component: 150 - total flux cleaned = 0.0051043 Jy ! Component: 200 - total flux cleaned = 0.00524662 Jy ! Total flux subtracted in 200 components = 0.00524662 Jy ! Clean residual min=-0.006061 max=0.005923 Jy/beam ! Clean residual mean=0.000051 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 2.37458 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.52835e-05 Jy ! Component: 100 - total flux cleaned = 0.000125881 Jy ! Component: 150 - total flux cleaned = 6.94081e-05 Jy ! Component: 200 - total flux cleaned = 6.9889e-05 Jy ! Total flux subtracted in 200 components = 6.9889e-05 Jy ! Clean residual min=-0.005983 max=0.006085 Jy/beam ! Clean residual mean=0.000052 rms=0.001851 Jy/beam ! Combined flux in latest and established models = 2.37465 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 2.37465 Jy ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! Estimated beam: bmin=0.7274 mas, bmaj=1.316 mas, bpa=2.644 degrees ! Estimated noise=861.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680387 Jy ! Component: 100 - total flux cleaned = -0.0011097 Jy ! Component: 150 - total flux cleaned = -0.000980437 Jy ! Component: 200 - total flux cleaned = -0.000858612 Jy ! Total flux subtracted in 200 components = -0.000858612 Jy ! Clean residual min=-0.007680 max=0.006539 Jy/beam ! Clean residual mean=0.000019 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 2.37379 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 2.37379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145595Jy sigma=0.001175 ! Fit after self-cal, rms=0.143618Jy sigma=0.001160 wmodel J0854+2006_X_2003_07_09_pus_map.mod ! Writing 112 model components to file: J0854+2006_X_2003_07_09_pus_map.mod wobs J0854+2006_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J0854+2006_X_2003_07_09_pus_uvs.fits wwins J0854+2006_X_2003_07_09_pus_map.win ! wwins: Wrote 5 windows to J0854+2006_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00378563 Jy ! Component: 100 - total flux cleaned = -0.00564761 Jy ! Component: 150 - total flux cleaned = -0.00589319 Jy ! Component: 200 - total flux cleaned = -0.00648646 Jy ! Component: 250 - total flux cleaned = -0.00694315 Jy ! Component: 300 - total flux cleaned = -0.00771195 Jy ! Component: 350 - total flux cleaned = -0.00845446 Jy ! Component: 400 - total flux cleaned = -0.00937926 Jy ! Component: 450 - total flux cleaned = -0.00998026 Jy ! Component: 500 - total flux cleaned = -0.0102734 Jy ! Component: 550 - total flux cleaned = -0.0108455 Jy ! Component: 600 - total flux cleaned = -0.0114975 Jy ! Component: 650 - total flux cleaned = -0.0122291 Jy ! Component: 700 - total flux cleaned = -0.013035 Jy ! Component: 750 - total flux cleaned = -0.0138262 Jy ! Component: 800 - total flux cleaned = -0.0146881 Jy ! Component: 850 - total flux cleaned = -0.0153646 Jy ! Component: 900 - total flux cleaned = -0.0160312 Jy ! Component: 950 - total flux cleaned = -0.0166045 Jy ! Component: 1000 - total flux cleaned = -0.0172494 Jy ! Component: 1050 - total flux cleaned = -0.0176453 Jy ! Component: 1100 - total flux cleaned = -0.0178801 Jy ! Component: 1150 - total flux cleaned = -0.0181117 Jy ! Component: 1200 - total flux cleaned = -0.018567 Jy ! Component: 1250 - total flux cleaned = -0.0187902 Jy ! Component: 1300 - total flux cleaned = -0.0192322 Jy ! Component: 1350 - total flux cleaned = -0.0193053 Jy ! Component: 1400 - total flux cleaned = -0.019737 Jy ! Component: 1450 - total flux cleaned = -0.0199499 Jy ! Component: 1500 - total flux cleaned = -0.0203 Jy ! Component: 1550 - total flux cleaned = -0.0207151 Jy ! Component: 1600 - total flux cleaned = -0.0207831 Jy ! Component: 1650 - total flux cleaned = -0.0211209 Jy ! Component: 1700 - total flux cleaned = -0.0213213 Jy ! Component: 1750 - total flux cleaned = -0.0215854 Jy ! Component: 1800 - total flux cleaned = -0.0217808 Jy ! Component: 1850 - total flux cleaned = -0.0219741 Jy ! Component: 1900 - total flux cleaned = -0.0221649 Jy ! Component: 1950 - total flux cleaned = -0.0223536 Jy ! Component: 2000 - total flux cleaned = -0.0222295 Jy ! Total flux subtracted in 2048 components = -0.0227233 Jy ! Clean residual min=-0.003613 max=0.003460 Jy/beam ! Clean residual mean=0.000017 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 2.35107 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 244 components and 2.35107 Jy ![Exited script file: muppet] wmap "J0854+2006_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7274 x 1.316 at 2.644 degrees (North through East) ! Clean map min=-0.007837 max=1.6815 Jy/beam ! Writing clean map to FITS file: J0854+2006_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.68151 invert ! Inverting map ! Your choice of large map pixels excluded 3.51% of the data. ! The x-axis pixel size should ideally be below 0.1559 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110088 device "J0854+2006_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0854+2006_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196409 0.196409 0.392818 0.785635 1.57127 3.14254 6.28508 12.5702 25.1403 50.2807 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.681 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7274 x 1.316 at 2.644 degrees (North through East) ! Clean map min=-0.007837 max=1.6815 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0854+2006_X_2003_07_09_pus_uvs.log closed on Sun Apr 7 12:31:46 2013