! Started logfile: J0423+4150_X_2003_07_09_pus_uvs.log on Sun Apr  7 11:43:49 2013
obs J0423+4150_X_2003_07_09_pus_uva.fits
! Reading UV FITS file: J0423+4150_X_2003_07_09_pus_uva.fits
! AN table 1: 387 integrations on 171 of 171 possible baselines.
! AN table 2: 222 integrations on 171 of 171 possible baselines.
! AN table 3: 136 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.17215 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0423+4150
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! Warning: Unknown AN-table MNTSTA value (3).
!          Will assume that it is ground-based.
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1874 lines of history.
! 
! Reading 87724 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0423+4150_X_2003_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5027 telescope corrections were flagged in sub-array 1.
!  A total of 2040 telescope corrections were flagged in sub-array 2.
!  A total of 1895 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 5027 telescope corrections were flagged in sub-array 1.
!  A total of 2040 telescope corrections were flagged in sub-array 2.
!  A total of 1895 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 5027 telescope corrections were flagged in sub-array 1.
!  A total of 2041 telescope corrections were flagged in sub-array 2.
!  A total of 1895 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 5028 telescope corrections were flagged in sub-array 1.
!  A total of 2041 telescope corrections were flagged in sub-array 2.
!  A total of 1895 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=0.592056Jy  sigma=0.005311
! Fit after  self-cal, rms=0.269780Jy  sigma=0.002395
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.608 mas, bmaj=0.8151 mas, bpa=4.231 degrees
! Estimated noise=678.422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.744929 Jy
! Component: 100  -  total flux cleaned = 0.913649 Jy
! Total flux subtracted in 100 components = 0.913649 Jy
! Clean residual min=-0.023020 max=0.072009 Jy/beam
! Clean residual mean=0.000535 rms=0.006054 Jy/beam
! Combined flux in latest and established models = 0.913649 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.913649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284280Jy  sigma=0.002626
! Fit after  self-cal, rms=0.284295Jy  sigma=0.002626
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0790574 Jy
! Component: 100  -  total flux cleaned = 0.128377 Jy
! Total flux subtracted in 100 components = 0.128377 Jy
! Clean residual min=-0.023527 max=0.038605 Jy/beam
! Clean residual mean=0.000363 rms=0.004646 Jy/beam
! Combined flux in latest and established models = 1.04203 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 1.04203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243615Jy  sigma=0.002163
! Fit after  self-cal, rms=0.242047Jy  sigma=0.002153
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037137 Jy
! Component: 100  -  total flux cleaned = 0.0625814 Jy
! Total flux subtracted in 100 components = 0.0625814 Jy
! Clean residual min=-0.021807 max=0.032257 Jy/beam
! Clean residual mean=0.000279 rms=0.004101 Jy/beam
! Combined flux in latest and established models = 1.10461 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 1.10461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229180Jy  sigma=0.001996
! Fit after  self-cal, rms=0.228585Jy  sigma=0.001992
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326355 Jy
! Component: 100  -  total flux cleaned = 0.0553739 Jy
! Total flux subtracted in 100 components = 0.0553739 Jy
! Clean residual min=-0.020370 max=0.022841 Jy/beam
! Clean residual mean=0.000205 rms=0.003685 Jy/beam
! Combined flux in latest and established models = 1.15998 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 1.15998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216313Jy  sigma=0.001843
! Fit after  self-cal, rms=0.215939Jy  sigma=0.001841
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-3.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236608 Jy
! Component: 100  -  total flux cleaned = 0.0420122 Jy
! Total flux subtracted in 100 components = 0.0420122 Jy
! Clean residual min=-0.019253 max=0.019585 Jy/beam
! Clean residual mean=0.000150 rms=0.003421 Jy/beam
! Combined flux in latest and established models = 1.20199 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 1.20199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.208324Jy  sigma=0.001746
! Fit after  self-cal, rms=0.208009Jy  sigma=0.001744
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8187 mas, bmaj=1.081 mas, bpa=-4.73 degrees
! Estimated noise=272.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534846 Jy
! Component: 100  -  total flux cleaned = 0.0925093 Jy
! Component: 150  -  total flux cleaned = 0.122551 Jy
! Component: 200  -  total flux cleaned = 0.145879 Jy
! Total flux subtracted in 200 components = 0.145879 Jy
! Clean residual min=-0.019915 max=0.026780 Jy/beam
! Clean residual mean=-0.000330 rms=0.005424 Jy/beam
! Combined flux in latest and established models = 1.34787 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 75 components and 1.34787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191823Jy  sigma=0.001524
! Fit after  self-cal, rms=0.190771Jy  sigma=0.001514
! Inverting map 
! Your choice of large map pixels excluded 1.12% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     GC        1.01     GG        1.00*    
!   HN        0.95     KP        1.02     LA        0.94     MA        1.00*    
!   MK        1.00     NL        0.99     NY        1.01     ON        1.00*    
!   OV        0.99     PT        0.96     SC        1.00*    TC        1.00*    
!   TS        1.00     WF        1.00*    WZ        1.00*    
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.98     GC        1.04     GG        1.00*    
!   HN        1.07     KP        0.94     LA        0.95     MA        1.00*    
!   MK        0.98     NL        1.10     NY        0.97     ON        0.95     
!   OV        1.00     PT        0.96     SC        1.01     TC        1.00*    
!   TS        1.00     WF        1.00*    WZ        1.00*    
! 
!  A total of 120 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.98     FD        1.09     GC        1.00*    GG        1.00*    
!   HN        0.94     KP        1.07     LA        0.99     MA        1.00*    
!   MK        1.00*    NL        1.03     NY        0.99     ON        1.00*    
!   OV        1.02     PT        1.01     SC        0.87     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     GC        1.04     GG        1.00*    
!   HN        0.96     KP        1.02     LA        0.94     MA        1.00*    
!   MK        1.02     NL        0.99     NY        1.07     ON        1.00*    
!   OV        0.98     PT        1.00     SC        1.00*    TC        1.00*    
!   TS        1.01     WF        1.00*    WZ        1.00*    
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.98     GC        1.10     GG        1.00*    
!   HN        1.11     KP        0.90     LA        0.95     MA        1.00*    
!   MK        0.99     NL        1.06     NY        1.00     ON        0.96     
!   OV        1.00     PT        1.00     SC        0.98     TC        1.00*    
!   TS        1.01     WF        1.00*    WZ        1.00*    
! 
!  A total of 120 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        1.07     GC        1.00*    GG        1.00*    
!   HN        0.95     KP        1.04     LA        1.00     MA        1.00*    
!   MK        1.00*    NL        1.03     NY        1.04     ON        1.00*    
!   OV        1.02     PT        1.05     SC        0.89     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     GC        0.99     GG        1.00*    
!   HN        0.96     KP        1.02     LA        0.94     MA        1.00*    
!   MK        1.02     NL        1.02     NY        1.12     ON        1.00*    
!   OV        1.02     PT        0.97     SC        1.00*    TC        1.00*    
!   TS        1.01     WF        1.00*    WZ        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     GC        1.20     GG        1.00*    
!   HN        1.10     KP        0.85     LA        0.95     MA        1.00*    
!   MK        0.99     NL        1.05     NY        1.04     ON        1.25     
!   OV        1.03     PT        1.01     SC        1.01     TC        1.00*    
!   TS        1.01     WF        1.00*    WZ        1.00*    
! 
!  A total of 120 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.04     FD        1.06     GC        1.00*    GG        1.00*    
!   HN        0.94     KP        0.98     LA        1.00     MA        1.00*    
!   MK        1.00*    NL        1.05     NY        1.07     ON        1.00*    
!   OV        1.05     PT        1.02     SC        0.87     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     GC        0.97     GG        1.00*    
!   HN        0.99     KP        1.02     LA        0.93     MA        1.00*    
!   MK        1.05     NL        0.98     NY        1.10     ON        1.00*    
!   OV        1.01     PT        0.98     SC        1.00*    TC        1.00*    
!   TS        1.00     WF        1.00*    WZ        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.97     GC        1.24     GG        1.00*    
!   HN        1.15     KP        0.91     LA        0.94     MA        1.00*    
!   MK        1.01     NL        1.04     NY        1.03     ON        1.32     
!   OV        1.02     PT        1.02     SC        1.06     TC        1.00*    
!   TS        1.04     WF        1.00*    WZ        1.00*    
! 
!  A total of 120 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        1.07     GC        1.00*    GG        1.00*    
!   HN        0.97     KP        1.01     LA        1.00     MA        1.00*    
!   MK        1.00*    NL        1.03     NY        1.04     ON        1.00*    
!   OV        1.04     PT        1.03     SC        0.91     TC        1.00*    
!   TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.190771Jy  sigma=0.001514
! Fit after  self-cal, rms=0.178365Jy  sigma=0.001352
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8249 mas, bmaj=1.096 mas, bpa=-4.215 degrees
! Estimated noise=271.962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251679 Jy
! Component: 100  -  total flux cleaned = 0.0402308 Jy
! Component: 150  -  total flux cleaned = 0.0506311 Jy
! Component: 200  -  total flux cleaned = 0.0580928 Jy
! Total flux subtracted in 200 components = 0.0580928 Jy
! Clean residual min=-0.007379 max=0.013838 Jy/beam
! Clean residual mean=-0.000045 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 1.40597 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 114 components and 1.40597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175199Jy  sigma=0.001301
! Fit after  self-cal, rms=0.175026Jy  sigma=0.001298
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-2.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125744 Jy
! Component: 100  -  total flux cleaned = 0.017004 Jy
! Component: 150  -  total flux cleaned = 0.0179653 Jy
! Component: 200  -  total flux cleaned = 0.018799 Jy
! Total flux subtracted in 200 components = 0.018799 Jy
! Clean residual min=-0.007044 max=0.007308 Jy/beam
! Clean residual mean=-0.000066 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 1.42477 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 1.42477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173996Jy  sigma=0.001286
! Fit after  self-cal, rms=0.173888Jy  sigma=0.001285
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173888Jy  sigma=0.001285
! Fit after  self-cal, rms=0.172454Jy  sigma=0.001271
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8243 mas, bmaj=1.095 mas, bpa=-4.363 degrees
! Estimated noise=271.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00814305 Jy
! Component: 100  -  total flux cleaned = 0.0124458 Jy
! Component: 150  -  total flux cleaned = 0.0147519 Jy
! Component: 200  -  total flux cleaned = 0.016213 Jy
! Total flux subtracted in 200 components = 0.016213 Jy
! Clean residual min=-0.004793 max=0.006477 Jy/beam
! Clean residual mean=0.000006 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 1.44098 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 1.44098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171941Jy  sigma=0.001265
! Fit after  self-cal, rms=0.171879Jy  sigma=0.001264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00684259 Jy
! Component: 100  -  total flux cleaned = 0.00941954 Jy
! Component: 150  -  total flux cleaned = 0.0102792 Jy
! Component: 200  -  total flux cleaned = 0.0109161 Jy
! Total flux subtracted in 200 components = 0.0109161 Jy
! Clean residual min=-0.004588 max=0.005109 Jy/beam
! Clean residual mean=-0.000012 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 1.45189 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 153 components and 1.45189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171532Jy  sigma=0.001260
! Fit after  self-cal, rms=0.171499Jy  sigma=0.001260
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-4.4, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00538958 Jy
! Component: 100  -  total flux cleaned = 0.006731 Jy
! Component: 150  -  total flux cleaned = 0.00751844 Jy
! Component: 200  -  total flux cleaned = 0.00802248 Jy
! Total flux subtracted in 200 components = 0.00802248 Jy
! Clean residual min=-0.004551 max=0.004007 Jy/beam
! Clean residual mean=-0.000030 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 1.45992 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 1.45992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171302Jy  sigma=0.001257
! Fit after  self-cal, rms=0.171294Jy  sigma=0.001257
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171294Jy  sigma=0.001257
! Fit after  self-cal, rms=0.171231Jy  sigma=0.001255
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8245 mas, bmaj=1.095 mas, bpa=-4.496 degrees
! Estimated noise=271.612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338875 Jy
! Component: 100  -  total flux cleaned = 0.00487671 Jy
! Component: 150  -  total flux cleaned = 0.00551943 Jy
! Component: 200  -  total flux cleaned = 0.00609975 Jy
! Total flux subtracted in 200 components = 0.00609975 Jy
! Clean residual min=-0.003350 max=0.003339 Jy/beam
! Clean residual mean=0.000020 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 1.46602 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 175 components and 1.46602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171082Jy  sigma=0.001253
! Fit after  self-cal, rms=0.171073Jy  sigma=0.001253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145841 Jy
! Component: 100  -  total flux cleaned = 0.00208246 Jy
! Component: 150  -  total flux cleaned = 0.00249003 Jy
! Component: 200  -  total flux cleaned = 0.00279695 Jy
! Total flux subtracted in 200 components = 0.00279695 Jy
! Clean residual min=-0.003292 max=0.003108 Jy/beam
! Clean residual mean=0.000016 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 1.46881 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 183 components and 1.46881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170995Jy  sigma=0.001253
! Fit after  self-cal, rms=0.170989Jy  sigma=0.001253
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170989Jy  sigma=0.001253
! Fit after  self-cal, rms=0.171098Jy  sigma=0.001252
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=2.403 mas, bmaj=2.685 mas, bpa=-10.36 degrees
! Estimated noise=346.34 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340555 Jy
! Component: 100  -  total flux cleaned = 0.00499757 Jy
! Component: 150  -  total flux cleaned = 0.00610868 Jy
! Component: 200  -  total flux cleaned = 0.00700197 Jy
! Total flux subtracted in 200 components = 0.00700197 Jy
! Clean residual min=-0.003723 max=0.003026 Jy/beam
! Clean residual mean=0.000037 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 1.47582 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 203 components and 1.47582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171054Jy  sigma=0.001251
! Fit after  self-cal, rms=0.171046Jy  sigma=0.001251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104234 Jy
! Component: 100  -  total flux cleaned = 0.00172448 Jy
! Component: 150  -  total flux cleaned = 0.00220593 Jy
! Component: 200  -  total flux cleaned = 0.00233624 Jy
! Total flux subtracted in 200 components = 0.00233624 Jy
! Clean residual min=-0.003509 max=0.003077 Jy/beam
! Clean residual mean=0.000028 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 1.47815 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 206 components and 1.47815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171044Jy  sigma=0.001251
! Fit after  self-cal, rms=0.171042Jy  sigma=0.001251
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8248 mas, bmaj=1.096 mas, bpa=-4.571 degrees
! Estimated noise=271.591 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8248 x 1.096 at -4.571 degrees (North through East)
! Clean map  min=-0.0025565  max=0.98178 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171042Jy  sigma=0.001251
! Fit after  self-cal, rms=0.160104Jy  sigma=0.001141
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8255 mas, bmaj=1.096 mas, bpa=-4.751 degrees
! Estimated noise=271.46 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029397 Jy
! Component: 100  -  total flux cleaned = -0.000298282 Jy
! Component: 150  -  total flux cleaned = -0.000229028 Jy
! Component: 200  -  total flux cleaned = -0.000164926 Jy
! Total flux subtracted in 200 components = -0.000164926 Jy
! Clean residual min=-0.002471 max=0.002232 Jy/beam
! Clean residual mean=0.000017 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 1.47799 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 211 components and 1.47799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160041Jy  sigma=0.001141
! Fit after  self-cal, rms=0.160038Jy  sigma=0.001141
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184257 Jy
! Component: 100  -  total flux cleaned = 0.000370292 Jy
! Component: 150  -  total flux cleaned = 0.000427558 Jy
! Component: 200  -  total flux cleaned = 0.000485541 Jy
! Total flux subtracted in 200 components = 0.000485541 Jy
! Clean residual min=-0.002445 max=0.002190 Jy/beam
! Clean residual mean=0.000017 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 1.47847 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 214 components and 1.47847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159996Jy  sigma=0.001140
! Fit after  self-cal, rms=0.159995Jy  sigma=0.001140
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159995Jy  sigma=0.001140
! Fit after  self-cal, rms=0.160139Jy  sigma=0.001140
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.609 mas, bmaj=0.8195 mas, bpa=4.467 degrees
! Estimated noise=688.696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.748937 Jy
! Component: 100  -  total flux cleaned = 0.920262 Jy
! Component: 150  -  total flux cleaned = 0.998518 Jy
! Component: 200  -  total flux cleaned = 1.04814 Jy
! Total flux subtracted in 200 components = 1.04814 Jy
! Clean residual min=-0.010790 max=0.028489 Jy/beam
! Clean residual mean=0.000520 rms=0.003443 Jy/beam
! Combined flux in latest and established models = 1.04814 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.04814 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8259 mas, bmaj=1.097 mas, bpa=-4.794 degrees
! Estimated noise=271.463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0900313 Jy
! Component: 100  -  total flux cleaned = 0.153399 Jy
! Component: 150  -  total flux cleaned = 0.201861 Jy
! Component: 200  -  total flux cleaned = 0.239935 Jy
! Total flux subtracted in 200 components = 0.239935 Jy
! Clean residual min=-0.010477 max=0.023060 Jy/beam
! Clean residual mean=0.000219 rms=0.004993 Jy/beam
! Combined flux in latest and established models = 1.28808 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 90 components and 1.28808 Jy
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-0.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306089 Jy
! Component: 100  -  total flux cleaned = 0.0554354 Jy
! Component: 150  -  total flux cleaned = 0.0757796 Jy
! Component: 200  -  total flux cleaned = 0.0925432 Jy
! Total flux subtracted in 200 components = 0.0925432 Jy
! Clean residual min=-0.005756 max=0.010574 Jy/beam
! Clean residual mean=0.000129 rms=0.002479 Jy/beam
! Combined flux in latest and established models = 1.38062 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 144 components and 1.38062 Jy
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Added new window around map position (-3.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140113 Jy
! Component: 100  -  total flux cleaned = 0.0257263 Jy
! Component: 150  -  total flux cleaned = 0.0356075 Jy
! Component: 200  -  total flux cleaned = 0.0439818 Jy
! Total flux subtracted in 200 components = 0.0439818 Jy
! Clean residual min=-0.003653 max=0.005383 Jy/beam
! Clean residual mean=0.000081 rms=0.001386 Jy/beam
! Combined flux in latest and established models = 1.4246 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 187 components and 1.4246 Jy
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=2.403 mas, bmaj=2.686 mas, bpa=-10.51 degrees
! Estimated noise=345.626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146065 Jy
! Component: 100  -  total flux cleaned = 0.0242832 Jy
! Component: 150  -  total flux cleaned = 0.0311228 Jy
! Component: 200  -  total flux cleaned = 0.0362036 Jy
! Total flux subtracted in 200 components = 0.0362036 Jy
! Clean residual min=-0.003333 max=0.003878 Jy/beam
! Clean residual mean=0.000097 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 1.46081 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389492 Jy
! Component: 100  -  total flux cleaned = 0.00692268 Jy
! Component: 150  -  total flux cleaned = 0.00929716 Jy
! Component: 200  -  total flux cleaned = 0.011174 Jy
! Total flux subtracted in 200 components = 0.011174 Jy
! Clean residual min=-0.002570 max=0.002688 Jy/beam
! Clean residual mean=0.000057 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 1.47198 Jy
! Adding 136 model components to the UV plane model.
! The established model now contains 287 components and 1.47198 Jy
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! Estimated beam: bmin=0.8259 mas, bmaj=1.097 mas, bpa=-4.794 degrees
! Estimated noise=271.463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000424442 Jy
! Component: 100  -  total flux cleaned = 0.000370902 Jy
! Component: 150  -  total flux cleaned = 0.00113945 Jy
! Component: 200  -  total flux cleaned = 0.00182312 Jy
! Total flux subtracted in 200 components = 0.00182312 Jy
! Clean residual min=-0.002052 max=0.002064 Jy/beam
! Clean residual mean=0.000021 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 1.4738 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 297 components and 1.4738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160152Jy  sigma=0.001141
! Fit after  self-cal, rms=0.160089Jy  sigma=0.001141
wmodel J0423+4150_X_2003_07_09_pus_map.mod
! Writing 297 model components to file: J0423+4150_X_2003_07_09_pus_map.mod
wobs J0423+4150_X_2003_07_09_pus_uvs.fits
! Writing UV FITS file: J0423+4150_X_2003_07_09_pus_uvs.fits
wwins J0423+4150_X_2003_07_09_pus_map.win
! wwins: Wrote 10 windows to J0423+4150_X_2003_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000576226 Jy
! Component: 100  -  total flux cleaned = -0.0011562 Jy
! Component: 150  -  total flux cleaned = -0.00164962 Jy
! Component: 200  -  total flux cleaned = -0.00190453 Jy
! Component: 250  -  total flux cleaned = -0.00215279 Jy
! Component: 300  -  total flux cleaned = -0.00245759 Jy
! Component: 350  -  total flux cleaned = -0.0026966 Jy
! Component: 400  -  total flux cleaned = -0.00296008 Jy
! Component: 450  -  total flux cleaned = -0.00319017 Jy
! Component: 500  -  total flux cleaned = -0.00333158 Jy
! Component: 550  -  total flux cleaned = -0.00355439 Jy
! Component: 600  -  total flux cleaned = -0.00369207 Jy
! Component: 650  -  total flux cleaned = -0.00393608 Jy
! Component: 700  -  total flux cleaned = -0.00404257 Jy
! Component: 750  -  total flux cleaned = -0.0041741 Jy
! Component: 800  -  total flux cleaned = -0.00422612 Jy
! Component: 850  -  total flux cleaned = -0.00435467 Jy
! Component: 900  -  total flux cleaned = -0.00448126 Jy
! Component: 950  -  total flux cleaned = -0.00460595 Jy
! Component: 1000  -  total flux cleaned = -0.0046306 Jy
! Component: 1050  -  total flux cleaned = -0.0046799 Jy
! Component: 1100  -  total flux cleaned = -0.00475272 Jy
! Component: 1150  -  total flux cleaned = -0.00480073 Jy
! Component: 1200  -  total flux cleaned = -0.00482444 Jy
! Component: 1250  -  total flux cleaned = -0.00477757 Jy
! Component: 1300  -  total flux cleaned = -0.0048245 Jy
! Component: 1350  -  total flux cleaned = -0.00487055 Jy
! Component: 1400  -  total flux cleaned = -0.00473369 Jy
! Component: 1450  -  total flux cleaned = -0.00486972 Jy
! Component: 1500  -  total flux cleaned = -0.00475721 Jy
! Component: 1550  -  total flux cleaned = -0.00473526 Jy
! Component: 1600  -  total flux cleaned = -0.00477935 Jy
! Component: 1650  -  total flux cleaned = -0.00480122 Jy
! Component: 1700  -  total flux cleaned = -0.0046923 Jy
! Component: 1750  -  total flux cleaned = -0.00471418 Jy
! Component: 1800  -  total flux cleaned = -0.00467119 Jy
! Component: 1850  -  total flux cleaned = -0.00473502 Jy
! Component: 1900  -  total flux cleaned = -0.00460793 Jy
! Component: 1950  -  total flux cleaned = -0.004587 Jy
! Component: 2000  -  total flux cleaned = -0.00456606 Jy
! Total flux subtracted in 2048 components = -0.00456595 Jy
! Clean residual min=-0.001208 max=0.001035 Jy/beam
! Clean residual mean=0.000033 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 1.46924 Jy
keep
! Adding 155 model components to the UV plane model.
! The established model now contains 450 components and 1.46924 Jy
![Exited script file: muppet]
wmap "J0423+4150_X_2003_07_09_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8259 x 1.097 at -4.794 degrees (North through East)
! Clean map  min=-0.0017193  max=0.9852 Jy/beam
! Writing clean map to FITS file: J0423+4150_X_2003_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.9852 
invert
! Inverting map 
! Your choice of large map pixels excluded 1.13% of the data.
!  The x-axis pixel size should ideally be below 0.1557 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000368141 
device "J0423+4150_X_2003_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0423+4150_X_2003_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.112101 0.112101 0.224203 0.448406 0.896811 1.79362 3.58725 7.17449 14.349 28.698 57.3959
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.985 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8259 x 1.097 at -4.794 degrees (North through East)
! Clean map  min=-0.0017193  max=0.9852 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
quit
! Quitting program
! Log file J0423+4150_X_2003_07_09_pus_uvs.log closed on Sun Apr  7 11:44:20 2013