! Started logfile: J0259+0747_X_2003_07_09_pus_uvs.log on Sun Apr 7 11:38:18 2013 obs J0259+0747_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J0259+0747_X_2003_07_09_pus_uva.fits ! AN table 1: 42 integrations on 171 of 171 possible baselines. ! AN table 2: 51 integrations on 171 of 171 possible baselines. ! AN table 3: 53 integrations on 171 of 171 possible baselines. ! AN table 4: 109 integrations on 171 of 171 possible baselines. ! AN table 5: 292 integrations on 171 of 171 possible baselines. ! AN table 6: 531 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.165929 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0259+0747 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 122348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0259+0747_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 610 telescope corrections were flagged in sub-array 1. ! A total of 723 telescope corrections were flagged in sub-array 2. ! A total of 737 telescope corrections were flagged in sub-array 3. ! A total of 2071 telescope corrections were flagged in sub-array 4. ! A total of 2332 telescope corrections were flagged in sub-array 5. ! A total of 7527 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 610 telescope corrections were flagged in sub-array 1. ! A total of 723 telescope corrections were flagged in sub-array 2. ! A total of 737 telescope corrections were flagged in sub-array 3. ! A total of 2071 telescope corrections were flagged in sub-array 4. ! A total of 2233 telescope corrections were flagged in sub-array 5. ! A total of 7527 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 610 telescope corrections were flagged in sub-array 1. ! A total of 723 telescope corrections were flagged in sub-array 2. ! A total of 737 telescope corrections were flagged in sub-array 3. ! A total of 2071 telescope corrections were flagged in sub-array 4. ! A total of 2331 telescope corrections were flagged in sub-array 5. ! A total of 7587 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 610 telescope corrections were flagged in sub-array 1. ! A total of 723 telescope corrections were flagged in sub-array 2. ! A total of 737 telescope corrections were flagged in sub-array 3. ! A total of 2071 telescope corrections were flagged in sub-array 4. ! A total of 2331 telescope corrections were flagged in sub-array 5. ! A total of 7587 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.868465Jy sigma=0.005216 ! Fit after self-cal, rms=0.762289Jy sigma=0.004524 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.5668 mas, bmaj=1.231 mas, bpa=-12.34 degrees ! Estimated noise=735.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253358 Jy ! Component: 100 - total flux cleaned = 0.320635 Jy ! Total flux subtracted in 100 components = 0.320635 Jy ! Clean residual min=-0.012302 max=0.035026 Jy/beam ! Clean residual mean=0.000007 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 0.320635 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.320635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363775Jy sigma=0.001378 ! Fit after self-cal, rms=0.363492Jy sigma=0.001377 ! Inverting map ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Added new window around map position (-0.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398855 Jy ! Component: 100 - total flux cleaned = 0.0643686 Jy ! Total flux subtracted in 100 components = 0.0643686 Jy ! Clean residual min=-0.008912 max=0.013435 Jy/beam ! Clean residual mean=0.000012 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.385004 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.385004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358784Jy sigma=0.001295 ! Fit after self-cal, rms=0.358189Jy sigma=0.001293 ! Inverting map ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195521 Jy ! Component: 100 - total flux cleaned = 0.0326036 Jy ! Total flux subtracted in 100 components = 0.0326036 Jy ! Clean residual min=-0.007421 max=0.011263 Jy/beam ! Clean residual mean=0.000015 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.417607 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.417607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357171Jy sigma=0.001273 ! Fit after self-cal, rms=0.357000Jy sigma=0.001272 ! Inverting map ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6213 mas, bmaj=1.597 mas, bpa=-12.98 degrees ! Estimated noise=340.841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122628 Jy ! Component: 100 - total flux cleaned = 0.0186563 Jy ! Component: 150 - total flux cleaned = 0.0224671 Jy ! Component: 200 - total flux cleaned = 0.0248889 Jy ! Total flux subtracted in 200 components = 0.0248889 Jy ! Clean residual min=-0.005453 max=0.007248 Jy/beam ! Clean residual mean=0.000289 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.442496 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.442496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356701Jy sigma=0.001265 ! Fit after self-cal, rms=0.356600Jy sigma=0.001265 ! Inverting map ! Your choice of large map pixels excluded 3.5% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 GC 1.00* GG 1.00* ! HN 0.93 KP 0.87 LA 1.01 MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.10 TC 1.00* ! TS 1.32 WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 GC 1.00* GG 1.00* ! HN 1.13 KP 0.92 LA 0.96 MA 1.00* ! MK 0.97 NL 1.06 NY 1.00* ON 1.00* ! OV 0.97 PT 0.93 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00* GC 1.04 GG 1.00* ! HN 1.00* KP 0.96 LA 1.01 MA 1.00* ! MK 0.91 NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.02 SC 1.00* TC 1.00* ! TS 0.81 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 0.99 GC 1.16 GG 1.00* ! HN 0.96 KP 1.00 LA 0.98 MA 1.07 ! MK 1.08 NL 1.00 NY 1.11 ON 0.98 ! OV 1.00 PT 0.97 SC 0.90 TC 1.09 ! TS 1.00* WF 1.09 WZ 1.03 ! ! A total of 207 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.91 KP 1.00* LA 1.00* MA 0.97 ! MK 1.00* NL 1.46 NY 1.06 ON 0.94 ! OV 1.00* PT 1.00* SC 0.91 TC 0.87 ! TS 1.00* WF 0.98 WZ 0.92 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 GC 1.00* GG 1.00* ! HN 1.03 KP 0.90 LA 0.94 MA 1.00* ! MK 1.00* NL 1.11 NY 1.00* ON 1.00* ! OV 1.00* PT 1.01 SC 0.92 TC 1.00* ! TS 1.56 WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.95 GC 1.00* GG 1.00* ! HN 1.19 KP 0.87 LA 0.96 MA 1.00* ! MK 0.94 NL 1.03 NY 1.00* ON 1.00* ! OV 0.95 PT 0.98 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00* GC 1.02 GG 1.00* ! HN 1.00* KP 0.91 LA 1.03 MA 1.00* ! MK 0.95 NL 1.00* NY 1.00* ON 1.00* ! OV 0.96 PT 1.08 SC 1.00* TC 1.00* ! TS 0.80 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.99 GC 1.21 GG 1.00* ! HN 0.98 KP 1.01 LA 0.97 MA 1.13 ! MK 1.04 NL 0.98 NY 1.15 ON 1.01 ! OV 0.99 PT 1.02 SC 0.92 TC 1.00 ! TS 1.00* WF 1.11 WZ 1.05 ! ! A total of 207 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.93 KP 1.00* LA 1.00* MA 0.95 ! MK 1.00* NL 1.46 NY 1.11 ON 0.92 ! OV 1.00* PT 1.00* SC 0.93 TC 0.86 ! TS 1.00* WF 1.01 WZ 0.95 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 GC 1.00* GG 1.00* ! HN 0.95 KP 0.86 LA 1.00 MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 1.07 SC 0.97 TC 1.00* ! TS 1.48 WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 GC 1.00* GG 1.00* ! HN 1.21 KP 0.84 LA 0.95 MA 1.00* ! MK 0.96 NL 1.05 NY 1.00* ON 1.00* ! OV 0.97 PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* GC 1.18 GG 1.00* ! HN 1.00* KP 0.91 LA 1.01 MA 1.00* ! MK 0.96 NL 1.00* NY 1.00* ON 1.00* ! OV 1.02 PT 1.07 SC 1.00* TC 1.00* ! TS 0.79 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 0.98 GC 1.16 GG 1.00* ! HN 0.96 KP 1.01 LA 0.98 MA 1.12 ! MK 0.97 NL 1.02 NY 1.15 ON 0.93 ! OV 1.03 PT 0.99 SC 0.88 TC 0.97 ! TS 1.00* WF 1.12 WZ 1.03 ! ! A total of 147 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.91 KP 1.00* LA 1.00* MA 0.88 ! MK 1.00* NL 1.51 NY 1.12 ON 0.91 ! OV 1.00* PT 1.00* SC 0.92 TC 0.84 ! TS 1.00* WF 0.92 WZ 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 GC 1.00* GG 1.00* ! HN 1.02 KP 0.87 LA 0.95 MA 1.00* ! MK 1.00* NL 1.01 NY 1.00* ON 1.00* ! OV 1.00* PT 1.05 SC 1.02 TC 1.00* ! TS 1.47 WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.93 GC 1.00* GG 1.00* ! HN 1.20 KP 0.84 LA 0.98 MA 1.00* ! MK 0.98 NL 1.04 NY 1.00* ON 1.00* ! OV 0.97 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00* GC 1.14 GG 1.00* ! HN 1.00* KP 0.90 LA 0.98 MA 1.00* ! MK 0.93 NL 1.00* NY 1.00* ON 1.00* ! OV 0.98 PT 1.11 SC 1.00* TC 1.00* ! TS 0.82 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.96 GC 1.06 GG 1.00* ! HN 0.98 KP 1.00 LA 0.98 MA 1.05 ! MK 1.05 NL 0.98 NY 1.15 ON 0.86 ! OV 1.01 PT 1.01 SC 0.94 TC 0.93 ! TS 1.00* WF 1.11 WZ 1.00 ! ! A total of 147 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.95 KP 1.00* LA 1.00* MA 0.86 ! MK 1.00* NL 1.43 NY 1.11 ON 0.94 ! OV 1.00* PT 1.00* SC 0.90 TC 0.76 ! TS 1.00* WF 0.95 WZ 0.91 ! ! ! Fit before self-cal, rms=0.356600Jy sigma=0.001265 ! Fit after self-cal, rms=0.350519Jy sigma=0.001248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6233 mas, bmaj=1.586 mas, bpa=-13.03 degrees ! Estimated noise=340.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145153 Jy ! Component: 100 - total flux cleaned = 0.00144087 Jy ! Component: 150 - total flux cleaned = 0.00148937 Jy ! Component: 200 - total flux cleaned = 0.00153455 Jy ! Total flux subtracted in 200 components = 0.00153455 Jy ! Clean residual min=-0.002522 max=0.003143 Jy/beam ! Clean residual mean=0.000057 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.444031 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.444031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350486Jy sigma=0.001248 ! Fit after self-cal, rms=0.350811Jy sigma=0.001247 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Added new window around map position (-0.8, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260211 Jy ! Component: 100 - total flux cleaned = 0.00349514 Jy ! Component: 150 - total flux cleaned = 0.00419655 Jy ! Component: 200 - total flux cleaned = 0.00449076 Jy ! Total flux subtracted in 200 components = 0.00449076 Jy ! Clean residual min=-0.002206 max=0.002289 Jy/beam ! Clean residual mean=0.000011 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.448521 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.448521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350786Jy sigma=0.001247 ! Fit after self-cal, rms=0.350779Jy sigma=0.001247 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350779Jy sigma=0.001247 ! Fit after self-cal, rms=0.350178Jy sigma=0.001246 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6242 mas, bmaj=1.583 mas, bpa=-13.01 degrees ! Estimated noise=341.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880923 Jy ! Component: 100 - total flux cleaned = 0.00149647 Jy ! Component: 150 - total flux cleaned = 0.00187901 Jy ! Component: 200 - total flux cleaned = 0.00201422 Jy ! Total flux subtracted in 200 components = 0.00201422 Jy ! Clean residual min=-0.001964 max=0.002044 Jy/beam ! Clean residual mean=0.000039 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.450536 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.450536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350165Jy sigma=0.001246 ! Fit after self-cal, rms=0.350141Jy sigma=0.001246 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304049 Jy ! Component: 100 - total flux cleaned = 0.00053565 Jy ! Component: 150 - total flux cleaned = 0.000706419 Jy ! Component: 200 - total flux cleaned = 0.000810682 Jy ! Total flux subtracted in 200 components = 0.000810682 Jy ! Clean residual min=-0.001948 max=0.002015 Jy/beam ! Clean residual mean=0.000028 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.451346 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.451346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350132Jy sigma=0.001246 ! Fit after self-cal, rms=0.350129Jy sigma=0.001246 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350129Jy sigma=0.001246 ! Fit after self-cal, rms=0.349871Jy sigma=0.001245 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6248 mas, bmaj=1.581 mas, bpa=-13.02 degrees ! Estimated noise=340.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656553 Jy ! Component: 100 - total flux cleaned = 0.000821992 Jy ! Component: 150 - total flux cleaned = 0.000959733 Jy ! Component: 200 - total flux cleaned = 0.0010591 Jy ! Total flux subtracted in 200 components = 0.0010591 Jy ! Clean residual min=-0.001879 max=0.001667 Jy/beam ! Clean residual mean=-0.000009 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.452405 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.452405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349861Jy sigma=0.001245 ! Fit after self-cal, rms=0.349858Jy sigma=0.001245 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211963 Jy ! Component: 100 - total flux cleaned = 0.000361005 Jy ! Component: 150 - total flux cleaned = 0.000467149 Jy ! Component: 200 - total flux cleaned = 0.000506619 Jy ! Total flux subtracted in 200 components = 0.000506619 Jy ! Clean residual min=-0.001854 max=0.001676 Jy/beam ! Clean residual mean=-0.000012 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.452912 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.452912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349854Jy sigma=0.001245 ! Fit after self-cal, rms=0.349852Jy sigma=0.001245 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349852Jy sigma=0.001245 ! Fit after self-cal, rms=0.349731Jy sigma=0.001244 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=2.398 mas, bmaj=3.051 mas, bpa=-17.72 degrees ! Estimated noise=426.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387196 Jy ! Component: 100 - total flux cleaned = 0.00032768 Jy ! Component: 150 - total flux cleaned = 0.000350831 Jy ! Component: 200 - total flux cleaned = 0.000389701 Jy ! Total flux subtracted in 200 components = 0.000389701 Jy ! Clean residual min=-0.001673 max=0.001706 Jy/beam ! Clean residual mean=-0.000027 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.453302 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.453302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349732Jy sigma=0.001244 ! Fit after self-cal, rms=0.349726Jy sigma=0.001244 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.03561e-05 Jy ! Component: 100 - total flux cleaned = 0.00010588 Jy ! Component: 150 - total flux cleaned = 0.000122093 Jy ! Component: 200 - total flux cleaned = 0.000137531 Jy ! Total flux subtracted in 200 components = 0.000137531 Jy ! Clean residual min=-0.001625 max=0.001700 Jy/beam ! Clean residual mean=-0.000031 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.453439 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 96 components and 0.453439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349729Jy sigma=0.001244 ! Fit after self-cal, rms=0.349722Jy sigma=0.001244 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=1.579 mas, bpa=-13.04 degrees ! Estimated noise=340.961 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6253 x 1.579 at -13.04 degrees (North through East) ! Clean map min=-0.0016764 max=0.32491 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.5692 mas, bmaj=1.22 mas, bpa=-12.81 degrees ! Estimated noise=726.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249124 Jy ! Component: 100 - total flux cleaned = 0.322134 Jy ! Component: 150 - total flux cleaned = 0.364092 Jy ! Component: 200 - total flux cleaned = 0.38999 Jy ! Total flux subtracted in 200 components = 0.38999 Jy ! Clean residual min=-0.005413 max=0.013836 Jy/beam ! Clean residual mean=0.000000 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.38999 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.38999 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=1.579 mas, bpa=-13.04 degrees ! Estimated noise=340.961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237708 Jy ! Component: 100 - total flux cleaned = 0.0370195 Jy ! Component: 150 - total flux cleaned = 0.0448783 Jy ! Component: 200 - total flux cleaned = 0.0500301 Jy ! Total flux subtracted in 200 components = 0.0500301 Jy ! Clean residual min=-0.001866 max=0.003647 Jy/beam ! Clean residual mean=0.000155 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.44002 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.44002 Jy ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Added new window around map position (0.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382908 Jy ! Component: 100 - total flux cleaned = 0.00652655 Jy ! Component: 150 - total flux cleaned = 0.00858728 Jy ! Component: 200 - total flux cleaned = 0.0101764 Jy ! Total flux subtracted in 200 components = 0.0101764 Jy ! Clean residual min=-0.001813 max=0.001748 Jy/beam ! Clean residual mean=0.000027 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.450197 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 63 components and 0.450197 Jy ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=2.398 mas, bmaj=3.051 mas, bpa=-17.72 degrees ! Estimated noise=426.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184117 Jy ! Component: 100 - total flux cleaned = 0.00286066 Jy ! Component: 150 - total flux cleaned = 0.00317261 Jy ! Component: 200 - total flux cleaned = 0.00330973 Jy ! Total flux subtracted in 200 components = 0.00330973 Jy ! Clean residual min=-0.001665 max=0.001593 Jy/beam ! Clean residual mean=-0.000034 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.453506 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.01529e-05 Jy ! Component: 100 - total flux cleaned = 9.65768e-05 Jy ! Component: 150 - total flux cleaned = 0.000146617 Jy ! Component: 200 - total flux cleaned = 0.000177153 Jy ! Total flux subtracted in 200 components = 0.000177153 Jy ! Clean residual min=-0.001676 max=0.001602 Jy/beam ! Clean residual mean=-0.000040 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.453683 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 95 components and 0.453683 Jy ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=1.579 mas, bpa=-13.04 degrees ! Estimated noise=340.961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381481 Jy ! Component: 100 - total flux cleaned = 0.000412239 Jy ! Component: 150 - total flux cleaned = 0.0004933 Jy ! Component: 200 - total flux cleaned = 0.000544369 Jy ! Total flux subtracted in 200 components = 0.000544369 Jy ! Clean residual min=-0.001772 max=0.001723 Jy/beam ! Clean residual mean=-0.000023 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.454228 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.454228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349721Jy sigma=0.001244 ! Fit after self-cal, rms=0.349812Jy sigma=0.001244 wmodel J0259+0747_X_2003_07_09_pus_map.mod ! Writing 109 model components to file: J0259+0747_X_2003_07_09_pus_map.mod wobs J0259+0747_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J0259+0747_X_2003_07_09_pus_uvs.fits wwins J0259+0747_X_2003_07_09_pus_map.win ! wwins: Wrote 4 windows to J0259+0747_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227892 Jy ! Component: 100 - total flux cleaned = -0.000435887 Jy ! Component: 150 - total flux cleaned = -0.000464428 Jy ! Component: 200 - total flux cleaned = -0.000491252 Jy ! Component: 250 - total flux cleaned = -0.000598032 Jy ! Component: 300 - total flux cleaned = -0.000780621 Jy ! Component: 350 - total flux cleaned = -0.000908402 Jy ! Component: 400 - total flux cleaned = -0.00100924 Jy ! Component: 450 - total flux cleaned = -0.00110827 Jy ! Component: 500 - total flux cleaned = -0.00115723 Jy ! Component: 550 - total flux cleaned = -0.00125378 Jy ! Component: 600 - total flux cleaned = -0.00132525 Jy ! Component: 650 - total flux cleaned = -0.0013723 Jy ! Component: 700 - total flux cleaned = -0.00141891 Jy ! Component: 750 - total flux cleaned = -0.00141917 Jy ! Component: 800 - total flux cleaned = -0.00151012 Jy ! Component: 850 - total flux cleaned = -0.00151001 Jy ! Component: 900 - total flux cleaned = -0.00157679 Jy ! Component: 950 - total flux cleaned = -0.00157664 Jy ! Component: 1000 - total flux cleaned = -0.00157669 Jy ! Component: 1050 - total flux cleaned = -0.00162011 Jy ! Component: 1100 - total flux cleaned = -0.00162004 Jy ! Component: 1150 - total flux cleaned = -0.00164125 Jy ! Component: 1200 - total flux cleaned = -0.00164117 Jy ! Component: 1250 - total flux cleaned = -0.00162016 Jy ! Component: 1300 - total flux cleaned = -0.0016409 Jy ! Component: 1350 - total flux cleaned = -0.00162015 Jy ! Component: 1400 - total flux cleaned = -0.00159979 Jy ! Component: 1450 - total flux cleaned = -0.0016404 Jy ! Component: 1500 - total flux cleaned = -0.00160005 Jy ! Component: 1550 - total flux cleaned = -0.00153999 Jy ! Component: 1600 - total flux cleaned = -0.00161965 Jy ! Component: 1650 - total flux cleaned = -0.00157994 Jy ! Component: 1700 - total flux cleaned = -0.00154066 Jy ! Component: 1750 - total flux cleaned = -0.00156013 Jy ! Component: 1800 - total flux cleaned = -0.00152123 Jy ! Component: 1850 - total flux cleaned = -0.00148261 Jy ! Component: 1900 - total flux cleaned = -0.00146341 Jy ! Component: 1950 - total flux cleaned = -0.00144431 Jy ! Component: 2000 - total flux cleaned = -0.00140643 Jy ! Total flux subtracted in 2048 components = -0.00142511 Jy ! Clean residual min=-0.000999 max=0.001020 Jy/beam ! Clean residual mean=-0.000003 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.452803 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 268 components and 0.452803 Jy ![Exited script file: muppet] wmap "J0259+0747_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6253 x 1.579 at -13.04 degrees (North through East) ! Clean map min=-0.0015986 max=0.32514 Jy/beam ! Writing clean map to FITS file: J0259+0747_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325145 invert ! Inverting map ! Your choice of large map pixels excluded 3.53% of the data. ! The x-axis pixel size should ideally be below 0.1851 milli-arcsec ! The y-axis pixel size should ideally be below 0.1634 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337742 device "J0259+0747_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0259+0747_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.311623 0.311623 0.623246 1.24649 2.49299 4.98597 9.97194 19.9439 39.8878 79.7755 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6253 x 1.579 at -13.04 degrees (North through East) ! Clean map min=-0.0015986 max=0.32514 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0259+0747_X_2003_07_09_pus_uvs.log closed on Sun Apr 7 11:38:47 2013