! Started logfile: J0136+4751_S_2003_07_09_pus_uvs.log on Sun Apr 7 18:12:17 2013 obs J0136+4751_S_2003_07_09_pus_uva.fits ! Reading UV FITS file: J0136+4751_S_2003_07_09_pus_uva.fits ! AN table 1: 75 integrations on 171 of 171 possible baselines. ! AN table 2: 196 integrations on 171 of 171 possible baselines. ! AN table 3: 10 integrations on 171 of 171 possible baselines. ! AN table 4: 50 integrations on 171 of 171 possible baselines. ! AN table 5: 166 integrations on 171 of 171 possible baselines. ! AN table 6: 66 integrations on 171 of 171 possible baselines. ! AN table 7: 63 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.159941 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0136+4751 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1520 lines of history. ! ! Reading 68484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0136+4751_S_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1053 telescope corrections were flagged in sub-array 1. ! A total of 2500 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 573 telescope corrections were flagged in sub-array 4. ! A total of 1780 telescope corrections were flagged in sub-array 5. ! A total of 1114 telescope corrections were flagged in sub-array 6. ! A total of 522 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 1083 telescope corrections were flagged in sub-array 1. ! A total of 2581 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 573 telescope corrections were flagged in sub-array 4. ! A total of 1832 telescope corrections were flagged in sub-array 5. ! A total of 1129 telescope corrections were flagged in sub-array 6. ! A total of 522 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 1083 telescope corrections were flagged in sub-array 1. ! A total of 2500 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 573 telescope corrections were flagged in sub-array 4. ! A total of 1779 telescope corrections were flagged in sub-array 5. ! A total of 1114 telescope corrections were flagged in sub-array 6. ! A total of 515 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 1083 telescope corrections were flagged in sub-array 1. ! A total of 2501 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 573 telescope corrections were flagged in sub-array 4. ! A total of 1779 telescope corrections were flagged in sub-array 5. ! A total of 1115 telescope corrections were flagged in sub-array 6. ! A total of 516 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.220219Jy sigma=0.009522 ! Fit after self-cal, rms=0.658779Jy sigma=0.005685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2 mas, bmaj=2.772 mas, bpa=5.525 degrees ! Estimated noise=884.313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.943414 Jy ! Component: 100 - total flux cleaned = 1.2414 Jy ! Total flux subtracted in 100 components = 1.2414 Jy ! Clean residual min=-0.031771 max=0.137399 Jy/beam ! Clean residual mean=0.000241 rms=0.010543 Jy/beam ! Combined flux in latest and established models = 1.2414 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.2414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536399Jy sigma=0.004497 ! Fit after self-cal, rms=0.535825Jy sigma=0.004494 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161172 Jy ! Component: 100 - total flux cleaned = 0.265922 Jy ! Total flux subtracted in 100 components = 0.265922 Jy ! Clean residual min=-0.025810 max=0.057842 Jy/beam ! Clean residual mean=0.000090 rms=0.007666 Jy/beam ! Combined flux in latest and established models = 1.50732 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 1.50732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443809Jy sigma=0.003530 ! Fit after self-cal, rms=0.443043Jy sigma=0.003526 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0741952 Jy ! Component: 100 - total flux cleaned = 0.125929 Jy ! Total flux subtracted in 100 components = 0.125929 Jy ! Clean residual min=-0.024281 max=0.032225 Jy/beam ! Clean residual mean=0.000018 rms=0.006793 Jy/beam ! Combined flux in latest and established models = 1.63325 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 1.63325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418832Jy sigma=0.003245 ! Fit after self-cal, rms=0.418552Jy sigma=0.003244 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=3.725 mas, bpa=15.88 degrees ! Estimated noise=359.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0781726 Jy ! Component: 100 - total flux cleaned = 0.117111 Jy ! Component: 150 - total flux cleaned = 0.137823 Jy ! Component: 200 - total flux cleaned = 0.148923 Jy ! Total flux subtracted in 200 components = 0.148923 Jy ! Clean residual min=-0.025638 max=0.030175 Jy/beam ! Clean residual mean=0.000813 rms=0.007493 Jy/beam ! Combined flux in latest and established models = 1.78218 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 1.78218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408144Jy sigma=0.003099 ! Fit after self-cal, rms=0.407943Jy sigma=0.003098 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.19 GC 1.08 GG 1.00* ! HN 0.99 KP 0.92 LA 1.21 MA 1.00* ! MK 1.00 NL 1.02 NY 1.13 ON 1.00* ! OV 0.94 PT 1.04 SC 1.00* TC 1.00* ! TS 1.04 WF 0.94 WZ 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.23 GC 1.05 GG 1.00* ! HN 0.95 KP 1.21 LA 1.25 MA 1.36 ! MK 1.00* NL 1.05 NY 1.18 ON 1.30 ! OV 1.00* PT 1.15 SC 0.90 TC 1.00* ! TS 1.08 WF 0.96 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.17 GC 1.02 GG 1.00* ! HN 1.05 KP 0.89 LA 1.19 MA 1.00* ! MK 0.97 NL 1.04 NY 1.11 ON 1.20 ! OV 1.18 PT 1.05 SC 1.00* TC 1.00* ! TS 1.05 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.16 GC 1.03 GG 1.00* ! HN 0.97 KP 0.91 LA 1.16 MA 1.18 ! MK 1.03 NL 0.94 NY 1.17 ON 1.27 ! OV 1.00 PT 1.01 SC 0.91 TC 1.00* ! TS 1.07 WF 1.00 WZ 0.92 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.92 KP 1.00* LA 1.00* MA 1.10 ! MK 1.00* NL 1.00* NY 1.38 ON 1.25 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.57 WZ 1.25 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 1.17 GC 1.06 GG 1.00* ! HN 0.92 KP 1.00* LA 1.18 MA 1.00* ! MK 1.00* NL 0.98 NY 1.35 ON 1.34 ! OV 1.02 PT 1.04 SC 0.96 TC 1.00* ! TS 1.03 WF 0.94 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.11 GC 0.97 GG 1.00* ! HN 1.04 KP 1.02 LA 1.16 MA 1.00* ! MK 1.05 NL 1.06 NY 0.87 ON 1.00* ! OV 1.10 PT 1.05 SC 1.00* TC 1.00* ! TS 1.04 WF 0.91 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.15 GC 0.95 GG 1.00* ! HN 1.00 KP 1.32 LA 1.19 MA 1.00* ! MK 1.00* NL 1.09 NY 0.91 ON 1.07 ! OV 1.00* PT 1.14 SC 0.93 TC 1.00* ! TS 1.07 WF 0.95 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 1.10 GC 0.92 GG 1.00* ! HN 1.13 KP 0.98 LA 1.16 MA 1.00* ! MK 1.06 NL 1.09 NY 0.85 ON 1.01 ! OV 1.15 PT 1.04 SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.06 GC 0.91 GG 1.00* ! HN 1.01 KP 0.97 LA 1.09 MA 1.00* ! MK 1.00 NL 0.99 NY 0.91 ON 1.08 ! OV 0.92 PT 0.99 SC 0.93 TC 1.00* ! TS 1.07 WF 0.96 WZ 0.92 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.99 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 0.87 ON 1.08 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.89 WZ 1.17 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.13 FD 1.08 GC 0.96 GG 1.00* ! HN 0.99 KP 1.00* LA 1.13 MA 1.00* ! MK 1.00* NL 1.02 NY 0.84 ON 1.11 ! OV 1.02 PT 1.03 SC 0.93 TC 1.00* ! TS 1.02 WF 0.92 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 GC 1.17 GG 1.00* ! HN 1.04 KP 1.01 LA 0.92 MA 1.00* ! MK 0.98 NL 1.08 NY 0.83 ON 1.00* ! OV 1.02 PT 1.10 SC 1.00* TC 1.00* ! TS 1.02 WF 0.90 WZ 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.23 FD 1.08 GC 1.25 GG 1.00* ! HN 0.98 KP 1.27 LA 0.95 MA 1.02 ! MK 1.00* NL 1.09 NY 0.93 ON 1.35 ! OV 1.00* PT 1.16 SC 1.04 TC 1.00* ! TS 1.09 WF 0.93 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 1.02 GC 1.18 GG 1.00* ! HN 1.10 KP 0.97 LA 0.92 MA 1.00* ! MK 0.97 NL 1.10 NY 0.79 ON 1.20 ! OV 1.16 PT 1.06 SC 1.00* TC 1.00* ! TS 1.04 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.58 FD 1.00 GC 1.12 GG 1.00* ! HN 1.01 KP 0.94 LA 0.89 MA 1.04 ! MK 0.94 NL 1.01 NY 0.87 ON 1.32 ! OV 0.93 PT 1.02 SC 1.03 TC 1.00* ! TS 1.03 WF 0.99 WZ 0.93 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.97 KP 1.00* LA 1.00* MA 1.08 ! MK 1.00* NL 1.00* NY 0.85 ON 1.38 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.91 WZ 1.12 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.65 FD 1.01 GC 1.15 GG 1.00* ! HN 0.99 KP 1.00* LA 0.91 MA 1.00* ! MK 1.00* NL 1.05 NY 0.77 ON 1.34 ! OV 1.03 PT 1.06 SC 1.37 TC 1.00* ! TS 1.01 WF 0.92 WZ 1.15 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.94 GC 1.21 GG 1.00* ! HN 1.04 KP 1.00 LA 0.76 MA 1.00* ! MK 0.93 NL 0.98 NY 0.76 ON 1.00* ! OV 0.77 PT 1.02 SC 1.00* TC 1.00* ! TS 1.02 WF 0.88 WZ 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 0.96 GC 1.32 GG 1.00* ! HN 0.98 KP 1.27 LA 0.74 MA 1.00 ! MK 1.00* NL 1.05 NY 0.86 ON 1.42 ! OV 1.00* PT 1.09 SC 1.02 TC 1.00* ! TS 1.10 WF 0.92 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.20 FD 0.92 GC 1.13 GG 1.00* ! HN 1.10 KP 0.97 LA 0.75 MA 1.00* ! MK 0.91 NL 1.02 NY 0.73 ON 1.13 ! OV 1.08 PT 1.03 SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.23 FD 0.90 GC 1.15 GG 1.00* ! HN 1.00 KP 0.95 LA 0.72 MA 1.09 ! MK 0.89 NL 0.93 NY 0.80 ON 1.21 ! OV 0.83 PT 0.98 SC 1.02 TC 1.00* ! TS 0.99 WF 0.92 WZ 0.90 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.86 KP 1.00* LA 1.00* MA 1.39 ! MK 1.00* NL 1.00* NY 0.84 ON 1.37 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.85 WZ 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 0.91 GC 1.21 GG 1.00* ! HN 0.86 KP 1.00* LA 0.73 MA 1.00* ! MK 1.00* NL 0.98 NY 0.73 ON 1.28 ! OV 0.90 PT 1.01 SC 1.10 TC 1.00* ! TS 0.99 WF 0.88 WZ 1.04 ! ! ! Fit before self-cal, rms=0.407943Jy sigma=0.003098 ! Fit after self-cal, rms=0.304359Jy sigma=0.001851 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=3.756 mas, bpa=15.55 degrees ! Estimated noise=361.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136233 Jy ! Component: 100 - total flux cleaned = 0.0162151 Jy ! Component: 150 - total flux cleaned = 0.0172075 Jy ! Component: 200 - total flux cleaned = 0.0177839 Jy ! Total flux subtracted in 200 components = 0.0177839 Jy ! Clean residual min=-0.009793 max=0.008937 Jy/beam ! Clean residual mean=0.000281 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 1.79996 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 1.79996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303151Jy sigma=0.001839 ! Fit after self-cal, rms=0.303215Jy sigma=0.001836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303215Jy sigma=0.001836 ! Fit after self-cal, rms=0.291013Jy sigma=0.001762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=3.758 mas, bpa=15.37 degrees ! Estimated noise=361.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552468 Jy ! Component: 100 - total flux cleaned = 0.0072948 Jy ! Component: 150 - total flux cleaned = 0.00852578 Jy ! Component: 200 - total flux cleaned = 0.00999149 Jy ! Total flux subtracted in 200 components = 0.00999149 Jy ! Clean residual min=-0.004532 max=0.006644 Jy/beam ! Clean residual mean=0.000502 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 1.80995 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.80995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290364Jy sigma=0.001757 ! Fit after self-cal, rms=0.290227Jy sigma=0.001756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685675 Jy ! Component: 100 - total flux cleaned = 0.00977042 Jy ! Component: 150 - total flux cleaned = 0.0117436 Jy ! Component: 200 - total flux cleaned = 0.0128025 Jy ! Total flux subtracted in 200 components = 0.0128025 Jy ! Clean residual min=-0.004591 max=0.005695 Jy/beam ! Clean residual mean=0.000358 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 1.82275 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 95 components and 1.82275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289882Jy sigma=0.001754 ! Fit after self-cal, rms=0.289827Jy sigma=0.001753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289827Jy sigma=0.001753 ! Fit after self-cal, rms=0.287934Jy sigma=0.001740 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=3.758 mas, bpa=15.21 degrees ! Estimated noise=363.051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563026 Jy ! Component: 100 - total flux cleaned = 0.00768403 Jy ! Component: 150 - total flux cleaned = 0.00888542 Jy ! Component: 200 - total flux cleaned = 0.010056 Jy ! Total flux subtracted in 200 components = 0.010056 Jy ! Clean residual min=-0.003882 max=0.005224 Jy/beam ! Clean residual mean=0.000335 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 1.83281 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 108 components and 1.83281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287621Jy sigma=0.001738 ! Fit after self-cal, rms=0.287578Jy sigma=0.001738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053749 Jy ! Component: 100 - total flux cleaned = 0.00788445 Jy ! Component: 150 - total flux cleaned = 0.00933901 Jy ! Component: 200 - total flux cleaned = 0.0103931 Jy ! Total flux subtracted in 200 components = 0.0103931 Jy ! Clean residual min=-0.004008 max=0.004188 Jy/beam ! Clean residual mean=0.000218 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 1.8432 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 1.8432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287417Jy sigma=0.001736 ! Fit after self-cal, rms=0.287401Jy sigma=0.001736 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287401Jy sigma=0.001736 ! Fit after self-cal, rms=0.288139Jy sigma=0.001735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.821 mas, bmaj=9.696 mas, bpa=-68.73 degrees ! Estimated noise=481.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806944 Jy ! Component: 100 - total flux cleaned = 0.011897 Jy ! Component: 150 - total flux cleaned = 0.0141413 Jy ! Component: 200 - total flux cleaned = 0.0150396 Jy ! Total flux subtracted in 200 components = 0.0150396 Jy ! Clean residual min=-0.005804 max=0.005020 Jy/beam ! Clean residual mean=0.000383 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 1.85824 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 148 components and 1.85824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288071Jy sigma=0.001735 ! Fit after self-cal, rms=0.288035Jy sigma=0.001735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128058 Jy ! Component: 100 - total flux cleaned = 0.00180662 Jy ! Component: 150 - total flux cleaned = 0.00223558 Jy ! Component: 200 - total flux cleaned = 0.00261198 Jy ! Total flux subtracted in 200 components = 0.00261198 Jy ! Clean residual min=-0.005990 max=0.004632 Jy/beam ! Clean residual mean=0.000305 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 1.86085 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 154 components and 1.86085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288006Jy sigma=0.001735 ! Fit after self-cal, rms=0.287996Jy sigma=0.001735 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=3.759 mas, bpa=15.11 degrees ! Estimated noise=364.055 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.488 x 3.759 at 15.11 degrees (North through East) ! Clean map min=-0.0041446 max=1.3655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287996Jy sigma=0.001735 ! Fit after self-cal, rms=0.254753Jy sigma=0.001284 ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=3.761 mas, bpa=15.07 degrees ! Estimated noise=363.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024253 Jy ! Component: 100 - total flux cleaned = -0.00229201 Jy ! Component: 150 - total flux cleaned = -0.00217825 Jy ! Component: 200 - total flux cleaned = -0.00198344 Jy ! Total flux subtracted in 200 components = -0.00198344 Jy ! Clean residual min=-0.002793 max=0.003421 Jy/beam ! Clean residual mean=0.000243 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 1.85887 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 1.85887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254590Jy sigma=0.001282 ! Fit after self-cal, rms=0.254588Jy sigma=0.001282 ! Inverting map ! Added new window around map position (-9, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308012 Jy ! Component: 100 - total flux cleaned = 0.00370985 Jy ! Component: 150 - total flux cleaned = 0.00380434 Jy ! Component: 200 - total flux cleaned = 0.00372289 Jy ! Total flux subtracted in 200 components = 0.00372289 Jy ! Clean residual min=-0.002706 max=0.003049 Jy/beam ! Clean residual mean=0.000196 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 1.86259 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 176 components and 1.86259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254490Jy sigma=0.001281 ! Fit after self-cal, rms=0.254487Jy sigma=0.001281 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254487Jy sigma=0.001281 ! Fit after self-cal, rms=0.254687Jy sigma=0.001280 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=2.813 mas, bpa=4.83 degrees ! Estimated noise=919.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.973651 Jy ! Component: 100 - total flux cleaned = 1.27253 Jy ! Component: 150 - total flux cleaned = 1.43118 Jy ! Component: 200 - total flux cleaned = 1.53027 Jy ! Total flux subtracted in 200 components = 1.53027 Jy ! Clean residual min=-0.010731 max=0.053487 Jy/beam ! Clean residual mean=0.000196 rms=0.004017 Jy/beam ! Combined flux in latest and established models = 1.53027 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.53027 Jy ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=3.764 mas, bpa=15.02 degrees ! Estimated noise=363.843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123015 Jy ! Component: 100 - total flux cleaned = 0.186733 Jy ! Component: 150 - total flux cleaned = 0.224128 Jy ! Component: 200 - total flux cleaned = 0.248931 Jy ! Total flux subtracted in 200 components = 0.248931 Jy ! Clean residual min=-0.004980 max=0.013766 Jy/beam ! Clean residual mean=0.001119 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 1.7792 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 78 components and 1.7792 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177017 Jy ! Component: 100 - total flux cleaned = 0.0309278 Jy ! Component: 150 - total flux cleaned = 0.0411393 Jy ! Component: 200 - total flux cleaned = 0.0492499 Jy ! Total flux subtracted in 200 components = 0.0492499 Jy ! Clean residual min=-0.003064 max=0.006054 Jy/beam ! Clean residual mean=0.000584 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 1.82845 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 126 components and 1.82845 Jy ! Inverting map ! Added new window around map position (1.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686554 Jy ! Component: 100 - total flux cleaned = 0.0123507 Jy ! Component: 150 - total flux cleaned = 0.0169098 Jy ! Component: 200 - total flux cleaned = 0.0207327 Jy ! Total flux subtracted in 200 components = 0.0207327 Jy ! Clean residual min=-0.002497 max=0.003675 Jy/beam ! Clean residual mean=0.000356 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 1.84919 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 164 components and 1.84919 Jy ! Inverting map ! Added new window around map position (8, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341031 Jy ! Component: 100 - total flux cleaned = 0.00508364 Jy ! Component: 150 - total flux cleaned = 0.00661225 Jy ! Component: 200 - total flux cleaned = 0.0078189 Jy ! Total flux subtracted in 200 components = 0.0078189 Jy ! Clean residual min=-0.002331 max=0.002767 Jy/beam ! Clean residual mean=0.000271 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 1.857 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 184 components and 1.857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.828 mas, bmaj=9.678 mas, bpa=-68.76 degrees ! Estimated noise=479.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403505 Jy ! Component: 100 - total flux cleaned = 0.0063929 Jy ! Component: 150 - total flux cleaned = 0.00796351 Jy ! Component: 200 - total flux cleaned = 0.00907054 Jy ! Total flux subtracted in 200 components = 0.00907054 Jy ! Clean residual min=-0.002020 max=0.003180 Jy/beam ! Clean residual mean=0.000473 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 1.86608 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538649 Jy ! Component: 100 - total flux cleaned = 0.000708067 Jy ! Component: 150 - total flux cleaned = 0.000860021 Jy ! Component: 200 - total flux cleaned = 0.000975333 Jy ! Total flux subtracted in 200 components = 0.000975333 Jy ! Clean residual min=-0.001937 max=0.003142 Jy/beam ! Clean residual mean=0.000443 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 1.86705 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 239 components and 1.86705 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=3.764 mas, bpa=15.02 degrees ! Estimated noise=363.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130395 Jy ! Component: 100 - total flux cleaned = -0.00121723 Jy ! Component: 150 - total flux cleaned = -0.00114208 Jy ! Component: 200 - total flux cleaned = -0.0010781 Jy ! Total flux subtracted in 200 components = -0.0010781 Jy ! Clean residual min=-0.002298 max=0.002522 Jy/beam ! Clean residual mean=0.000172 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 1.86597 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 243 components and 1.86597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254398Jy sigma=0.001279 ! Fit after self-cal, rms=0.254407Jy sigma=0.001278 wmodel J0136+4751_S_2003_07_09_pus_map.mod ! Writing 243 model components to file: J0136+4751_S_2003_07_09_pus_map.mod wobs J0136+4751_S_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J0136+4751_S_2003_07_09_pus_uvs.fits wwins J0136+4751_S_2003_07_09_pus_map.win ! wwins: Wrote 7 windows to J0136+4751_S_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112807 Jy ! Component: 100 - total flux cleaned = 0.0018711 Jy ! Component: 150 - total flux cleaned = 0.00249675 Jy ! Component: 200 - total flux cleaned = 0.00306131 Jy ! Component: 250 - total flux cleaned = 0.00353113 Jy ! Component: 300 - total flux cleaned = 0.00399055 Jy ! Component: 350 - total flux cleaned = 0.00451507 Jy ! Component: 400 - total flux cleaned = 0.00499198 Jy ! Component: 450 - total flux cleaned = 0.005388 Jy ! Component: 500 - total flux cleaned = 0.00574255 Jy ! Component: 550 - total flux cleaned = 0.00605693 Jy ! Component: 600 - total flux cleaned = 0.0063667 Jy ! Component: 650 - total flux cleaned = 0.0065366 Jy ! Component: 700 - total flux cleaned = 0.00683947 Jy ! Component: 750 - total flux cleaned = 0.00703912 Jy ! Component: 800 - total flux cleaned = 0.00730284 Jy ! Component: 850 - total flux cleaned = 0.0074661 Jy ! Component: 900 - total flux cleaned = 0.00772465 Jy ! Component: 950 - total flux cleaned = 0.00794879 Jy ! Component: 1000 - total flux cleaned = 0.00820256 Jy ! Component: 1050 - total flux cleaned = 0.00842247 Jy ! Component: 1100 - total flux cleaned = 0.00857814 Jy ! Component: 1150 - total flux cleaned = 0.0087636 Jy ! Component: 1200 - total flux cleaned = 0.00891704 Jy ! Component: 1250 - total flux cleaned = 0.00900879 Jy ! Component: 1300 - total flux cleaned = 0.00919026 Jy ! Component: 1350 - total flux cleaned = 0.00928069 Jy ! Component: 1400 - total flux cleaned = 0.00942995 Jy ! Component: 1450 - total flux cleaned = 0.00954849 Jy ! Component: 1500 - total flux cleaned = 0.00966621 Jy ! Component: 1550 - total flux cleaned = 0.00978325 Jy ! Component: 1600 - total flux cleaned = 0.00984151 Jy ! Component: 1650 - total flux cleaned = 0.00992841 Jy ! Component: 1700 - total flux cleaned = 0.0100148 Jy ! Component: 1750 - total flux cleaned = 0.0101008 Jy ! Component: 1800 - total flux cleaned = 0.0102149 Jy ! Component: 1850 - total flux cleaned = 0.0102998 Jy ! Component: 1900 - total flux cleaned = 0.0104125 Jy ! Component: 1950 - total flux cleaned = 0.0104683 Jy ! Component: 2000 - total flux cleaned = 0.0104961 Jy ! Total flux subtracted in 2048 components = 0.0105793 Jy ! Clean residual min=-0.001613 max=0.001655 Jy/beam ! Clean residual mean=0.000070 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 1.87655 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 412 components and 1.87655 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2003_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 3.764 at 15.02 degrees (North through East) ! Clean map min=-0.0021186 max=1.3667 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.36669 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00052987 device "J0136+4751_S_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0136+4751_S_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.116311 0.116311 0.232622 0.465245 0.93049 1.86098 3.72196 7.44392 14.8878 29.7757 59.5513 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.366 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 3.764 at 15.02 degrees (North through East) ! Clean map min=-0.0021186 max=1.3667 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0136+4751_S_2003_07_09_pus_uvs.log closed on Sun Apr 7 18:12:41 2013