! Started logfile: J0121+1149_X_2003_07_09_pus_uvs.log on Sat Apr 6 23:21:07 2013 obs J0121+1149_X_2003_07_09_pus_uva.fits ! Reading UV FITS file: J0121+1149_X_2003_07_09_pus_uva.fits ! AN table 1: 140 integrations on 171 of 171 possible baselines. ! AN table 2: 140 integrations on 171 of 171 possible baselines. ! AN table 3: 56 integrations on 171 of 171 possible baselines. ! AN table 4: 134 integrations on 171 of 171 possible baselines. ! AN table 5: 60 integrations on 171 of 171 possible baselines. ! AN table 6: 257 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.049481 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0121+1149 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1874 lines of history. ! ! Reading 26636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0121+1149_X_2003_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2461 telescope corrections were flagged in sub-array 1. ! A total of 2457 telescope corrections were flagged in sub-array 2. ! A total of 1016 telescope corrections were flagged in sub-array 3. ! A total of 2440 telescope corrections were flagged in sub-array 4. ! A total of 685 telescope corrections were flagged in sub-array 5. ! A total of 3663 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 2462 telescope corrections were flagged in sub-array 1. ! A total of 2456 telescope corrections were flagged in sub-array 2. ! A total of 1016 telescope corrections were flagged in sub-array 3. ! A total of 2439 telescope corrections were flagged in sub-array 4. ! A total of 685 telescope corrections were flagged in sub-array 5. ! A total of 3666 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 2461 telescope corrections were flagged in sub-array 1. ! A total of 2453 telescope corrections were flagged in sub-array 2. ! A total of 1016 telescope corrections were flagged in sub-array 3. ! A total of 2444 telescope corrections were flagged in sub-array 4. ! A total of 685 telescope corrections were flagged in sub-array 5. ! A total of 3660 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 2467 telescope corrections were flagged in sub-array 1. ! A total of 2454 telescope corrections were flagged in sub-array 2. ! A total of 1016 telescope corrections were flagged in sub-array 3. ! A total of 2443 telescope corrections were flagged in sub-array 4. ! A total of 685 telescope corrections were flagged in sub-array 5. ! A total of 3667 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.151232Jy sigma=0.009937 ! Fit after self-cal, rms=0.378734Jy sigma=0.003230 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.5889 mas, bmaj=1.611 mas, bpa=1.278 degrees ! Estimated noise=963.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.774337 Jy ! Component: 100 - total flux cleaned = 0.987767 Jy ! Total flux subtracted in 100 components = 0.987767 Jy ! Clean residual min=-0.031720 max=0.102478 Jy/beam ! Clean residual mean=-0.000348 rms=0.010015 Jy/beam ! Combined flux in latest and established models = 0.987767 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.987767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372416Jy sigma=0.003234 ! Fit after self-cal, rms=0.369354Jy sigma=0.003220 ! Inverting map ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Added new window around map position (0, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128733 Jy ! Component: 100 - total flux cleaned = 0.212604 Jy ! Total flux subtracted in 100 components = 0.212604 Jy ! Clean residual min=-0.025731 max=0.048966 Jy/beam ! Clean residual mean=-0.000181 rms=0.007101 Jy/beam ! Combined flux in latest and established models = 1.20037 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 1.20037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286421Jy sigma=0.002345 ! Fit after self-cal, rms=0.283838Jy sigma=0.002331 ! Inverting map ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062059 Jy ! Component: 100 - total flux cleaned = 0.106057 Jy ! Total flux subtracted in 100 components = 0.106057 Jy ! Clean residual min=-0.023453 max=0.040133 Jy/beam ! Clean residual mean=-0.000104 rms=0.006058 Jy/beam ! Combined flux in latest and established models = 1.30643 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 1.30643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255815Jy sigma=0.002022 ! Fit after self-cal, rms=0.254901Jy sigma=0.002017 ! Inverting map ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Added new window around map position (-0.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397635 Jy ! Component: 100 - total flux cleaned = 0.0657698 Jy ! Total flux subtracted in 100 components = 0.0657698 Jy ! Clean residual min=-0.023001 max=0.030436 Jy/beam ! Clean residual mean=-0.000061 rms=0.005555 Jy/beam ! Combined flux in latest and established models = 1.3722 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 1.3722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244117Jy sigma=0.001893 ! Fit after self-cal, rms=0.243903Jy sigma=0.001892 ! Inverting map ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.7858 mas, bmaj=1.748 mas, bpa=0.8813 degrees ! Estimated noise=541.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584509 Jy ! Component: 100 - total flux cleaned = 0.0905968 Jy ! Component: 150 - total flux cleaned = 0.11042 Jy ! Component: 200 - total flux cleaned = 0.122438 Jy ! Total flux subtracted in 200 components = 0.122438 Jy ! Clean residual min=-0.021972 max=0.021501 Jy/beam ! Clean residual mean=-0.000243 rms=0.005660 Jy/beam ! Combined flux in latest and established models = 1.49464 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 1.49464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231137Jy sigma=0.001753 ! Fit after self-cal, rms=0.230744Jy sigma=0.001750 ! Inverting map ! Your choice of large map pixels excluded 1.45% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.98 KP 1.00* LA 1.00* MA 1.08 ! MK 1.00* NL 1.22 NY 1.09 ON 1.02 ! OV 1.00* PT 1.00* SC 0.98 TC 1.00* ! TS 0.93 WF 1.00* WZ 1.07 ! ! A total of 78 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.29 LA 1.37 MA 1.07 ! MK 0.91 NL 1.00* NY 0.92 ON 1.15 ! OV 1.15 PT 1.32 SC 1.00* TC 1.00* ! TS 1.25 WF 1.00* WZ 1.18 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00* GC 1.00* GG 1.00* ! HN 1.01 KP 1.00* LA 1.00* MA 1.00* ! MK 0.95 NL 1.10 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.01 ! MK 1.00* NL 1.00* NY 1.01 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.91 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.99 GC 0.91 GG 1.00* ! HN 1.04 KP 0.97 LA 0.98 MA 1.00* ! MK 1.01 NL 1.07 NY 1.00* ON 1.00* ! OV 0.98 PT 0.99 SC 1.00* TC 1.00* ! TS 1.03 WF 1.08 WZ 1.00* ! ! A total of 345 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 0.97 GC 1.06 GG 1.00* ! HN 0.98 KP 0.95 LA 1.00 MA 1.00* ! MK 1.01 NL 1.01 NY 1.00* ON 1.00* ! OV 0.96 PT 0.98 SC 0.95 TC 1.00* ! TS 1.00* WF 1.05 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.01 KP 1.00* LA 1.00* MA 1.06 ! MK 1.00* NL 1.20 NY 1.10 ON 1.04 ! OV 1.00* PT 1.00* SC 0.95 TC 1.00* ! TS 0.89 WF 1.00* WZ 1.06 ! ! A total of 75 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.28 LA 1.34 MA 1.09 ! MK 0.90 NL 1.00* NY 0.98 ON 1.22 ! OV 1.14 PT 1.41 SC 1.00* TC 1.00* ! TS 1.25 WF 1.00* WZ 1.20 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 1.00* GG 1.00* ! HN 0.98 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00 NL 1.01 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.21 ! MK 1.00* NL 1.00* NY 0.98 ON 1.06 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.91 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.99 GC 0.96 GG 1.00* ! HN 1.05 KP 0.94 LA 0.98 MA 1.00* ! MK 1.03 NL 1.05 NY 1.00* ON 1.00* ! OV 0.97 PT 1.02 SC 1.00* TC 1.00* ! TS 1.05 WF 1.13 WZ 1.00* ! ! A total of 342 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 0.97 GC 1.09 GG 1.00* ! HN 0.98 KP 0.94 LA 0.99 MA 1.00* ! MK 1.03 NL 1.00 NY 1.00* ON 1.00* ! OV 0.96 PT 1.02 SC 0.97 TC 1.00* ! TS 1.00* WF 1.05 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 0.99 KP 1.00* LA 1.00* MA 0.95 ! MK 1.00* NL 1.26 NY 1.08 ON 1.04 ! OV 1.00* PT 1.00* SC 0.92 TC 1.00* ! TS 0.96 WF 1.00* WZ 1.04 ! ! A total of 78 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.27 LA 1.33 MA 0.98 ! MK 0.90 NL 1.00* NY 0.99 ON 1.14 ! OV 1.19 PT 1.36 SC 1.00* TC 1.00* ! TS 1.35 WF 1.00* WZ 1.10 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00* GC 1.00* GG 1.00* ! HN 1.02 KP 1.00* LA 1.00* MA 1.00* ! MK 0.94 NL 1.01 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.13 ! MK 1.00* NL 1.00* NY 1.16 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.90 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.98 GC 0.91 GG 1.00* ! HN 1.02 KP 0.91 LA 1.00 MA 1.00* ! MK 1.03 NL 1.07 NY 1.00* ON 1.00* ! OV 1.02 PT 1.01 SC 1.00* TC 1.00* ! TS 1.10 WF 1.05 WZ 1.00* ! ! A total of 348 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.97 GC 1.04 GG 1.00* ! HN 0.97 KP 0.92 LA 1.00 MA 1.00* ! MK 1.03 NL 1.02 NY 1.00* ON 1.00* ! OV 0.99 PT 1.01 SC 0.91 TC 1.00* ! TS 1.00* WF 1.11 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.01 KP 1.00* LA 1.00* MA 1.02 ! MK 1.00* NL 1.29 NY 1.14 ON 1.16 ! OV 1.00* PT 1.00* SC 0.95 TC 1.00* ! TS 0.90 WF 1.00* WZ 0.99 ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.28 LA 1.35 MA 1.17 ! MK 0.87 NL 1.00* NY 0.99 ON 1.19 ! OV 1.17 PT 1.39 SC 1.00* TC 1.00* ! TS 1.26 WF 1.00* WZ 1.07 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 1.00* GG 1.00* ! HN 0.98 KP 1.00* LA 1.00* MA 1.00* ! MK 1.03 NL 1.01 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 75 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HN 1.00* KP 1.00* LA 1.00* MA 1.01 ! MK 1.00* NL 1.00* NY 0.90 ON 0.97 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.90 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.97 GC 0.88 GG 1.00* ! HN 1.05 KP 0.94 LA 0.98 MA 1.00* ! MK 1.03 NL 1.05 NY 1.00* ON 1.00* ! OV 1.01 PT 1.00 SC 1.00* TC 1.00* ! TS 1.04 WF 1.05 WZ 1.00* ! ! A total of 342 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 0.95 GC 1.05 GG 1.00* ! HN 1.00 KP 0.93 LA 0.99 MA 1.00* ! MK 1.05 NL 0.99 NY 1.00* ON 1.00* ! OV 0.99 PT 1.01 SC 0.96 TC 1.00* ! TS 1.00* WF 1.11 WZ 1.00* ! ! ! Fit before self-cal, rms=0.230744Jy sigma=0.001750 ! Fit after self-cal, rms=0.197764Jy sigma=0.001523 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8509 mas, bmaj=2.032 mas, bpa=-1.055 degrees ! Estimated noise=554.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749716 Jy ! Component: 100 - total flux cleaned = 0.00101529 Jy ! Component: 150 - total flux cleaned = 0.00213192 Jy ! Component: 200 - total flux cleaned = 0.00260694 Jy ! Total flux subtracted in 200 components = 0.00260694 Jy ! Clean residual min=-0.017971 max=0.014247 Jy/beam ! Clean residual mean=0.000057 rms=0.003665 Jy/beam ! Combined flux in latest and established models = 1.49724 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 1.49724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196501Jy sigma=0.001510 ! Fit after self-cal, rms=0.196326Jy sigma=0.001508 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196326Jy sigma=0.001508 ! Fit after self-cal, rms=0.190727Jy sigma=0.001405 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8528 mas, bmaj=2.04 mas, bpa=-1.231 degrees ! Estimated noise=557.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266143 Jy ! Component: 100 - total flux cleaned = 0.00438671 Jy ! Component: 150 - total flux cleaned = 0.00544334 Jy ! Component: 200 - total flux cleaned = 0.00561393 Jy ! Total flux subtracted in 200 components = 0.00561393 Jy ! Clean residual min=-0.013664 max=0.012897 Jy/beam ! Clean residual mean=0.000179 rms=0.002653 Jy/beam ! Combined flux in latest and established models = 1.50286 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 1.50286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189998Jy sigma=0.001398 ! Fit after self-cal, rms=0.189898Jy sigma=0.001398 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217315 Jy ! Component: 100 - total flux cleaned = -0.000207656 Jy ! Component: 150 - total flux cleaned = -0.000336039 Jy ! Component: 200 - total flux cleaned = -0.00033627 Jy ! Total flux subtracted in 200 components = -0.00033627 Jy ! Clean residual min=-0.013526 max=0.012719 Jy/beam ! Clean residual mean=0.000179 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 1.50252 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 1.50252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189698Jy sigma=0.001395 ! Fit after self-cal, rms=0.189656Jy sigma=0.001395 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189656Jy sigma=0.001395 ! Fit after self-cal, rms=0.179657Jy sigma=0.001264 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8516 mas, bmaj=2.043 mas, bpa=-1.41 degrees ! Estimated noise=558.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178641 Jy ! Component: 100 - total flux cleaned = 0.000337989 Jy ! Component: 150 - total flux cleaned = 0.000488923 Jy ! Component: 200 - total flux cleaned = 0.00075779 Jy ! Total flux subtracted in 200 components = 0.00075779 Jy ! Clean residual min=-0.006186 max=0.007320 Jy/beam ! Clean residual mean=0.000307 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 1.50328 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 1.50328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179352Jy sigma=0.001262 ! Fit after self-cal, rms=0.179296Jy sigma=0.001261 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459673 Jy ! Component: 100 - total flux cleaned = 0.00330903 Jy ! Component: 150 - total flux cleaned = 0.00237847 Jy ! Component: 200 - total flux cleaned = 0.00190458 Jy ! Total flux subtracted in 200 components = 0.00190458 Jy ! Clean residual min=-0.005951 max=0.007163 Jy/beam ! Clean residual mean=0.000303 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 1.50518 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 1.50518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178937Jy sigma=0.001258 ! Fit after self-cal, rms=0.178879Jy sigma=0.001258 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Added new window around map position (1.2, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710924 Jy ! Component: 100 - total flux cleaned = 0.00975488 Jy ! Component: 150 - total flux cleaned = 0.0113609 Jy ! Component: 200 - total flux cleaned = 0.0122763 Jy ! Total flux subtracted in 200 components = 0.0122763 Jy ! Clean residual min=-0.005510 max=0.004182 Jy/beam ! Clean residual mean=0.000257 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 1.51746 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 1.51746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178545Jy sigma=0.001254 ! Fit after self-cal, rms=0.178512Jy sigma=0.001254 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178512Jy sigma=0.001254 ! Fit after self-cal, rms=0.178593Jy sigma=0.001253 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=2.285 mas, bmaj=2.974 mas, bpa=-6.286 degrees ! Estimated noise=669.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305253 Jy ! Component: 100 - total flux cleaned = 0.00370828 Jy ! Component: 150 - total flux cleaned = 0.0041468 Jy ! Component: 200 - total flux cleaned = 0.00457044 Jy ! Total flux subtracted in 200 components = 0.00457044 Jy ! Clean residual min=-0.004082 max=0.004255 Jy/beam ! Clean residual mean=0.000438 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 1.52203 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 1.52203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178497Jy sigma=0.001252 ! Fit after self-cal, rms=0.178481Jy sigma=0.001252 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739649 Jy ! Component: 100 - total flux cleaned = 0.00116355 Jy ! Component: 150 - total flux cleaned = 0.00120976 Jy ! Component: 200 - total flux cleaned = 0.00120668 Jy ! Total flux subtracted in 200 components = 0.00120668 Jy ! Clean residual min=-0.004091 max=0.004202 Jy/beam ! Clean residual mean=0.000421 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 1.52324 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 146 components and 1.52324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178456Jy sigma=0.001252 ! Fit after self-cal, rms=0.178450Jy sigma=0.001251 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.852 mas, bmaj=2.048 mas, bpa=-1.493 degrees ! Estimated noise=558.443 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.852 x 2.048 at -1.493 degrees (North through East) ! Clean map min=-0.006206 max=1.116 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178450Jy sigma=0.001251 ! Fit after self-cal, rms=0.160326Jy sigma=0.001103 ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8525 mas, bmaj=2.048 mas, bpa=-1.525 degrees ! Estimated noise=558.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160767 Jy ! Component: 100 - total flux cleaned = -0.00136357 Jy ! Component: 150 - total flux cleaned = -0.00125788 Jy ! Component: 200 - total flux cleaned = -0.00105959 Jy ! Total flux subtracted in 200 components = -0.00105959 Jy ! Clean residual min=-0.004774 max=0.003746 Jy/beam ! Clean residual mean=0.000185 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 1.52218 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 1.52218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160130Jy sigma=0.001102 ! Fit after self-cal, rms=0.160097Jy sigma=0.001102 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306092 Jy ! Component: 100 - total flux cleaned = -0.000112897 Jy ! Component: 150 - total flux cleaned = 6.17979e-05 Jy ! Component: 200 - total flux cleaned = 0.00014734 Jy ! Total flux subtracted in 200 components = 0.00014734 Jy ! Clean residual min=-0.004563 max=0.003570 Jy/beam ! Clean residual mean=0.000184 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 1.52232 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 1.52232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159992Jy sigma=0.001101 ! Fit after self-cal, rms=0.159972Jy sigma=0.001101 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159972Jy sigma=0.001101 ! Fit after self-cal, rms=0.160253Jy sigma=0.001100 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.6 mas, bmaj=1.676 mas, bpa=-0.06411 degrees ! Estimated noise=1020.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.804644 Jy ! Component: 100 - total flux cleaned = 1.04336 Jy ! Component: 150 - total flux cleaned = 1.1697 Jy ! Component: 200 - total flux cleaned = 1.25196 Jy ! Total flux subtracted in 200 components = 1.25196 Jy ! Clean residual min=-0.013086 max=0.046122 Jy/beam ! Clean residual mean=-0.000130 rms=0.004440 Jy/beam ! Combined flux in latest and established models = 1.25196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 1.25196 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8531 mas, bmaj=2.053 mas, bpa=-1.594 degrees ! Estimated noise=558.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101851 Jy ! Component: 100 - total flux cleaned = 0.159746 Jy ! Component: 150 - total flux cleaned = 0.195086 Jy ! Component: 200 - total flux cleaned = 0.217069 Jy ! Total flux subtracted in 200 components = 0.217069 Jy ! Clean residual min=-0.005431 max=0.011536 Jy/beam ! Clean residual mean=0.000307 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 1.46903 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 61 components and 1.46903 Jy ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141723 Jy ! Component: 100 - total flux cleaned = 0.0242292 Jy ! Component: 150 - total flux cleaned = 0.0320129 Jy ! Component: 200 - total flux cleaned = 0.036094 Jy ! Total flux subtracted in 200 components = 0.036094 Jy ! Clean residual min=-0.004644 max=0.004713 Jy/beam ! Clean residual mean=0.000233 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 1.50512 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 92 components and 1.50512 Jy ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=2.285 mas, bmaj=2.98 mas, bpa=-6.408 degrees ! Estimated noise=668.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742066 Jy ! Component: 100 - total flux cleaned = 0.0103915 Jy ! Component: 150 - total flux cleaned = 0.0118277 Jy ! Component: 200 - total flux cleaned = 0.0129172 Jy ! Total flux subtracted in 200 components = 0.0129172 Jy ! Clean residual min=-0.004868 max=0.004308 Jy/beam ! Clean residual mean=0.000406 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 1.51804 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590774 Jy ! Component: 100 - total flux cleaned = 0.00110896 Jy ! Component: 150 - total flux cleaned = 0.00148009 Jy ! Component: 200 - total flux cleaned = 0.00189278 Jy ! Total flux subtracted in 200 components = 0.00189278 Jy ! Clean residual min=-0.004143 max=0.004030 Jy/beam ! Clean residual mean=0.000390 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 1.51993 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 129 components and 1.51993 Jy ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.8531 mas, bmaj=2.053 mas, bpa=-1.594 degrees ! Estimated noise=558.489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420827 Jy ! Component: 100 - total flux cleaned = 0.00029214 Jy ! Component: 150 - total flux cleaned = 0.000399892 Jy ! Component: 200 - total flux cleaned = 0.000397293 Jy ! Total flux subtracted in 200 components = 0.000397293 Jy ! Clean residual min=-0.004150 max=0.003644 Jy/beam ! Clean residual mean=0.000181 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 1.52033 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 1.52033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160240Jy sigma=0.001100 ! Fit after self-cal, rms=0.160123Jy sigma=0.001099 wmodel J0121+1149_X_2003_07_09_pus_map.mod ! Writing 141 model components to file: J0121+1149_X_2003_07_09_pus_map.mod wobs J0121+1149_X_2003_07_09_pus_uvs.fits ! Writing UV FITS file: J0121+1149_X_2003_07_09_pus_uvs.fits wwins J0121+1149_X_2003_07_09_pus_map.win ! wwins: Wrote 5 windows to J0121+1149_X_2003_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000614271 Jy ! Component: 100 - total flux cleaned = -5.04945e-05 Jy ! Component: 150 - total flux cleaned = 0.000659955 Jy ! Component: 200 - total flux cleaned = 0.0013415 Jy ! Component: 250 - total flux cleaned = 0.00205674 Jy ! Component: 300 - total flux cleaned = 0.00285993 Jy ! Component: 350 - total flux cleaned = 0.00374718 Jy ! Component: 400 - total flux cleaned = 0.00461324 Jy ! Component: 450 - total flux cleaned = 0.00536166 Jy ! Component: 500 - total flux cleaned = 0.00609719 Jy ! Component: 550 - total flux cleaned = 0.00691545 Jy ! Component: 600 - total flux cleaned = 0.0075778 Jy ! Component: 650 - total flux cleaned = 0.00827601 Jy ! Component: 700 - total flux cleaned = 0.00887307 Jy ! Component: 750 - total flux cleaned = 0.00959881 Jy ! Component: 800 - total flux cleaned = 0.0101358 Jy ! Component: 850 - total flux cleaned = 0.010623 Jy ! Component: 900 - total flux cleaned = 0.0112359 Jy ! Component: 950 - total flux cleaned = 0.0117987 Jy ! Component: 1000 - total flux cleaned = 0.0123133 Jy ! Component: 1050 - total flux cleaned = 0.0129075 Jy ! Component: 1100 - total flux cleaned = 0.0134537 Jy ! Component: 1150 - total flux cleaned = 0.0139112 Jy ! Component: 1200 - total flux cleaned = 0.0142416 Jy ! Component: 1250 - total flux cleaned = 0.0148556 Jy ! Component: 1300 - total flux cleaned = 0.0152208 Jy ! Component: 1350 - total flux cleaned = 0.0157435 Jy ! Component: 1400 - total flux cleaned = 0.0163016 Jy ! Component: 1450 - total flux cleaned = 0.0167763 Jy ! Component: 1500 - total flux cleaned = 0.0172471 Jy ! Component: 1550 - total flux cleaned = 0.0177147 Jy ! Component: 1600 - total flux cleaned = 0.0182936 Jy ! Component: 1650 - total flux cleaned = 0.0187533 Jy ! Component: 1700 - total flux cleaned = 0.0192856 Jy ! Component: 1750 - total flux cleaned = 0.019701 Jy ! Component: 1800 - total flux cleaned = 0.0202259 Jy ! Component: 1850 - total flux cleaned = 0.0207467 Jy ! Component: 1900 - total flux cleaned = 0.0212265 Jy ! Component: 1950 - total flux cleaned = 0.021557 Jy ! Component: 2000 - total flux cleaned = 0.0220672 Jy ! Total flux subtracted in 2048 components = 0.0225377 Jy ! Clean residual min=-0.001804 max=0.002041 Jy/beam ! Clean residual mean=0.000109 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 1.54287 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 290 components and 1.54287 Jy ![Exited script file: muppet] wmap "J0121+1149_X_2003_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8531 x 2.053 at -1.594 degrees (North through East) ! Clean map min=-0.00354 max=1.1208 Jy/beam ! Writing clean map to FITS file: J0121+1149_X_2003_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.1208 invert ! Inverting map ! Your choice of large map pixels excluded 1.49% of the data. ! The x-axis pixel size should ideally be below 0.1803 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000664487 device "J0121+1149_X_2003_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0121+1149_X_2003_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.177861 0.177861 0.355721 0.711442 1.42288 2.84577 5.69154 11.3831 22.7662 45.5323 91.0646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8531 x 2.053 at -1.594 degrees (North through East) ! Clean map min=-0.00354 max=1.1208 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0121+1149_X_2003_07_09_pus_uvs.log closed on Sat Apr 6 23:21:24 2013