! Started logfile: 1705+456_X.log on Mon Sep 10 19:35:45 2007 observe 1705+456_X.edt ! Reading UV FITS file: 1705+456_X.edt ! AN table 1: 53 integrations on 171 of 171 possible baselines. ! AN table 2: 22 integrations on 171 of 171 possible baselines. ! AN table 3: 57 integrations on 171 of 171 possible baselines. ! AN table 4: 148 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0988095 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1705+456 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2132 lines of history. ! ! Reading 18924 visibilities. ![@gonzo6-0.1 1705+456_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 414 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2348 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 646 telescope corrections were flagged in sub-array 1. ! A total of 410 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2352 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 412 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2352 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! A total of 411 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2368 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.650063Jy sigma=0.010251 ! Fit after self-cal, rms=0.649094Jy sigma=0.010237 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6378 mas, bmaj=0.8005 mas, bpa=14.35 degrees ! Estimated noise=879.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243693 Jy ! Total flux subtracted in 50 components = 0.243693 Jy ! Clean residual min=-0.010518 max=0.074139 Jy/beam ! Clean residual mean=-0.000000 rms=0.003741 Jy/beam ! Combined flux in latest and established models = 0.243693 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.243693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140145Jy sigma=0.002281 ! Fit after self-cal, rms=0.140144Jy sigma=0.002280 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731404 Jy ! Total flux subtracted in 50 components = 0.0731404 Jy ! Clean residual min=-0.006562 max=0.029514 Jy/beam ! Clean residual mean=0.000003 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.316833 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.316833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088803Jy sigma=0.001443 ! Fit after self-cal, rms=0.088800Jy sigma=0.001443 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327786 Jy ! Total flux subtracted in 50 components = 0.0327786 Jy ! Clean residual min=-0.005790 max=0.016668 Jy/beam ! Clean residual mean=0.000004 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.349612 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.349612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072693Jy sigma=0.001169 ! Fit after self-cal, rms=0.072679Jy sigma=0.001169 ! Inverting map ! Added new window around map position (-0.7, -0.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195722 Jy ! Total flux subtracted in 50 components = 0.0195722 Jy ! Clean residual min=-0.005321 max=0.013252 Jy/beam ! Clean residual mean=0.000004 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.369184 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.369184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065743Jy sigma=0.001046 ! Fit after self-cal, rms=0.065671Jy sigma=0.001046 ! Inverting map ! Added new window around map position (-3, -1.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145263 Jy ! Total flux subtracted in 50 components = 0.0145263 Jy ! Clean residual min=-0.004807 max=0.008322 Jy/beam ! Clean residual mean=0.000004 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.383711 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.383711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061662Jy sigma=0.000973 ! Fit after self-cal, rms=0.061505Jy sigma=0.000972 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108652 Jy ! Total flux subtracted in 50 components = 0.0108652 Jy ! Clean residual min=-0.004420 max=0.007756 Jy/beam ! Clean residual mean=0.000003 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.394576 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.394576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059019Jy sigma=0.000926 ! Fit after self-cal, rms=0.058933Jy sigma=0.000926 ! Inverting map ! Added new window around map position (-1.5, 0.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907081 Jy ! Total flux subtracted in 50 components = 0.00907081 Jy ! Clean residual min=-0.003976 max=0.006127 Jy/beam ! Clean residual mean=0.000003 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.403647 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.403647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057150Jy sigma=0.000892 ! Fit after self-cal, rms=0.057059Jy sigma=0.000891 ! Inverting map ! Added new window around map position (-2.3, -1.7). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074185 Jy ! Total flux subtracted in 50 components = 0.0074185 Jy ! Clean residual min=-0.003686 max=0.005485 Jy/beam ! Clean residual mean=0.000003 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.411065 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.411065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055827Jy sigma=0.000868 ! Fit after self-cal, rms=0.055768Jy sigma=0.000868 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.022 mas, bpa=-4.097 degrees ! Estimated noise=486.598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011905 Jy ! Component: 100 - total flux cleaned = 0.0192958 Jy ! Total flux subtracted in 100 components = 0.0192958 Jy ! Clean residual min=-0.003053 max=0.005548 Jy/beam ! Clean residual mean=0.000162 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.430361 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 101 components and 0.430361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053564Jy sigma=0.000825 ! Fit after self-cal, rms=0.053390Jy sigma=0.000823 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585125 Jy ! Component: 100 - total flux cleaned = 0.0096494 Jy ! Total flux subtracted in 100 components = 0.0096494 Jy ! Clean residual min=-0.002684 max=0.003496 Jy/beam ! Clean residual mean=0.000115 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.44001 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 122 components and 0.44001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052844Jy sigma=0.000812 ! Fit after self-cal, rms=0.052774Jy sigma=0.000811 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 GG 1.00* ! HN 1.01 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00 NL 1.02 NY 0.98 ON 1.00* ! OV 1.01 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 1.00* MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.01 GG 1.00* ! HN 1.00 KP 0.98 LA 0.99 MA 1.00* ! MK 1.01 NL 1.01 NY 1.00* ON 1.00* ! OV 0.99 PT 0.98 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.01 GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.00* ! MK 0.99 NL 1.01 NY 0.99 ON 1.00* ! OV 1.00 PT 0.99 SC 1.00* TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 GC 1.00 GG 1.00* ! HN 1.02 KP 1.00 LA 0.98 MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 0.99 LA 0.98 MA 1.00* ! MK 1.02 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 GC 1.01 GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.00* ! MK 1.01 NL 1.01 NY 0.98 ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 1.05 WF 1.00* WZ 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.01 GC 0.91 GG 1.00* ! HN 1.03 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 0.98 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.01 GG 1.00* ! HN 1.01 KP 0.99 LA 0.98 MA 1.00* ! MK 1.02 NL 1.01 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.01 GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00 NL 1.01 NY 0.99 ON 1.00* ! OV 1.01 PT 0.99 SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 GC 0.99 GG 1.00* ! HN 1.00* KP 1.01 LA 0.98 MA 1.00* ! MK 1.00* NL 1.01 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.01 GG 1.00* ! HN 1.00 KP 0.98 LA 0.99 MA 1.00* ! MK 1.02 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.98 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.052774Jy sigma=0.000811 ! Fit after self-cal, rms=0.052339Jy sigma=0.000807 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=1.025 mas, bpa=-51.03 degrees ! Estimated noise=484.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, -5.7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332651 Jy ! Component: 100 - total flux cleaned = 0.00545037 Jy ! Total flux subtracted in 100 components = 0.00545037 Jy ! Clean residual min=-0.002057 max=0.002305 Jy/beam ! Clean residual mean=0.000027 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.445461 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 0.445461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052158Jy sigma=0.000803 ! Fit after self-cal, rms=0.052146Jy sigma=0.000803 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232946 Jy ! Component: 100 - total flux cleaned = 0.0039057 Jy ! Total flux subtracted in 100 components = 0.0039057 Jy ! Clean residual min=-0.002044 max=0.001988 Jy/beam ! Clean residual mean=0.000006 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.449367 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.449366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052056Jy sigma=0.000801 ! Fit after self-cal, rms=0.051687Jy sigma=0.000795 ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.026 mas, bpa=-54.32 degrees ! Estimated noise=484.547 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154834 Jy ! Component: 100 - total flux cleaned = 0.00274624 Jy ! Total flux subtracted in 100 components = 0.00274624 Jy ! Clean residual min=-0.002005 max=0.001865 Jy/beam ! Clean residual mean=0.000007 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.452113 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.452113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051645Jy sigma=0.000794 ! Fit after self-cal, rms=0.051640Jy sigma=0.000794 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1705+456_X ! Writing UV FITS file: 1705+456_X.uvf ! Writing 173 model components to file: 1705+456_X.mod ! wwins: Wrote 7 windows to 1705+456_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.026 at -54.32 degrees (North through East) ! Clean map min=-0.0019725 max=0.33961 Jy/beam ! Writing clean map to FITS file: 1705+456_X.fits ! Writing difmap environment to: 1705+456_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1705+456_X] device 1705+456_Xuv.ps/vps,1,2 ! Attempting to open device: '1705+456_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1705+456_Xim.ps/vps ! Attempting to open device: '1705+456_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.026 mas, bpa=-54.32 degrees ! Estimated noise=484.547 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.026 at -54.32 degrees (North through East) ! Clean map min=-0.0019725 max=0.33961 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.1] quit ! Quitting program ! Log file 1705+456_X.log closed on Mon Sep 10 19:35:59 2007