! Started logfile: 1741-038_S.log on Thu Jul 19 21:35:48 2007 observe 1741-038_S.edt ! Reading UV FITS file: 1741-038_S.edt ! AN table 1: 73 integrations on 171 of 171 possible baselines. ! AN table 2: 6 integrations on 171 of 171 possible baselines. ! AN table 3: 34 integrations on 171 of 171 possible baselines. ! AN table 4: 57 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0940832 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1741-038 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1340 lines of history. ! ! Reading 10940 visibilities. ![@gonzo6-0.4 1741-038_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1181 telescope corrections were flagged in sub-array 1. ! A total of 83 telescope corrections were flagged in sub-array 2. ! A total of 612 telescope corrections were flagged in sub-array 3. ! A total of 976 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1165 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 611 telescope corrections were flagged in sub-array 3. ! A total of 964 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1177 telescope corrections were flagged in sub-array 1. ! A total of 85 telescope corrections were flagged in sub-array 2. ! A total of 613 telescope corrections were flagged in sub-array 3. ! A total of 972 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1196 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 616 telescope corrections were flagged in sub-array 3. ! A total of 1017 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.977109Jy sigma=0.029165 ! Fit after self-cal, rms=1.977778Jy sigma=0.029197 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.728 mas, bpa=3.226 degrees ! Estimated noise=1259.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.24821 Jy ! Total flux subtracted in 50 components = 2.24821 Jy ! Clean residual min=-0.116246 max=0.627036 Jy/beam ! Clean residual mean=-0.001177 rms=0.034538 Jy/beam ! Combined flux in latest and established models = 2.24821 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 2.24821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.782700Jy sigma=0.011696 ! Fit after self-cal, rms=0.782700Jy sigma=0.011696 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.525335 Jy ! Total flux subtracted in 50 components = 0.525335 Jy ! Clean residual min=-0.045614 max=0.194482 Jy/beam ! Clean residual mean=-0.000537 rms=0.013826 Jy/beam ! Combined flux in latest and established models = 2.77354 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.77354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359132Jy sigma=0.005219 ! Fit after self-cal, rms=0.359132Jy sigma=0.005219 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195643 Jy ! Total flux subtracted in 50 components = 0.195643 Jy ! Clean residual min=-0.023027 max=0.081385 Jy/beam ! Clean residual mean=-0.000296 rms=0.007914 Jy/beam ! Combined flux in latest and established models = 2.96918 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 2.96919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226357Jy sigma=0.003240 ! Fit after self-cal, rms=0.226361Jy sigma=0.003240 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855453 Jy ! Total flux subtracted in 50 components = 0.0855453 Jy ! Clean residual min=-0.021517 max=0.058961 Jy/beam ! Clean residual mean=-0.000194 rms=0.006243 Jy/beam ! Combined flux in latest and established models = 3.05473 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 3.05473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182331Jy sigma=0.002588 ! Fit after self-cal, rms=0.182326Jy sigma=0.002588 ! Inverting map ! Added new window around map position (-2.4, 10). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579334 Jy ! Total flux subtracted in 50 components = 0.0579334 Jy ! Clean residual min=-0.019027 max=0.051711 Jy/beam ! Clean residual mean=-0.000153 rms=0.005306 Jy/beam ! Combined flux in latest and established models = 3.11266 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 3.11266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160436Jy sigma=0.002246 ! Fit after self-cal, rms=0.159955Jy sigma=0.002238 ! Inverting map ! Added new window around map position (2.4, -10.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473315 Jy ! Total flux subtracted in 50 components = 0.0473315 Jy ! Clean residual min=-0.016290 max=0.029817 Jy/beam ! Clean residual mean=-0.000123 rms=0.004522 Jy/beam ! Combined flux in latest and established models = 3.15999 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 3.15999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144570Jy sigma=0.001985 ! Fit after self-cal, rms=0.144393Jy sigma=0.001982 ! Inverting map ! Added new window around map position (-12.8, -62.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345496 Jy ! Total flux subtracted in 50 components = 0.0345496 Jy ! Clean residual min=-0.014690 max=0.025421 Jy/beam ! Clean residual mean=-0.000103 rms=0.004073 Jy/beam ! Combined flux in latest and established models = 3.19454 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 3.19454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135553Jy sigma=0.001841 ! Fit after self-cal, rms=0.135399Jy sigma=0.001838 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=8.669 mas, bpa=-0.9199 degrees ! Estimated noise=785.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423611 Jy ! Component: 100 - total flux cleaned = 0.0693604 Jy ! Total flux subtracted in 100 components = 0.0693604 Jy ! Clean residual min=-0.014122 max=0.024417 Jy/beam ! Clean residual mean=-0.000131 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 3.2639 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 84 components and 3.2639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122977Jy sigma=0.001627 ! Fit after self-cal, rms=0.122834Jy sigma=0.001624 ! Inverting map ! Added new window around map position (12.4, 63.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222397 Jy ! Component: 100 - total flux cleaned = 0.0328193 Jy ! Total flux subtracted in 100 components = 0.0328193 Jy ! Clean residual min=-0.012653 max=0.014197 Jy/beam ! Clean residual mean=-0.000096 rms=0.003047 Jy/beam ! Combined flux in latest and established models = 3.29672 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 3.29672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118957Jy sigma=0.001558 ! Fit after self-cal, rms=0.118915Jy sigma=0.001558 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.07 ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 0.99 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 GC 1.00 GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00* GC 0.99 GG 1.00* ! HN 1.00* KP 1.00 LA 1.00* MA 1.00* ! MK 1.00 NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.01 GG 1.00* ! HN 1.01 KP 0.99 LA 1.00 MA 1.00* ! MK 1.01 NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00 WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.08 ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 0.99 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.01 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* GC 0.99 GG 1.00* ! HN 1.00* KP 1.00 LA 1.00* MA 1.00* ! MK 0.99 NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.01 GG 1.00* ! HN 1.00 KP 0.99 LA 1.00 MA 1.00* ! MK 1.01 NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.01 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.06 ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00 GC 1.01 GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.01 PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* GC 1.01 GG 1.00* ! HN 1.00* KP 1.01 LA 1.00* MA 1.00* ! MK 1.00 NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.00 GC 1.02 GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.00* ! MK 1.01 NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.01 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.08 ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 GC 1.01 GG 1.00* ! HN 1.00* KP 1.00 LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 0.98 PT 0.98 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00* GC 1.00 GG 1.00* ! HN 1.00* KP 1.01 LA 1.00* MA 1.00* ! MK 0.99 NL 1.00* NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.99 GC 1.03 GG 1.00* ! HN 0.99 KP 0.99 LA 1.00* MA 1.00* ! MK 1.00 NL 0.99 NY 1.00* ON 1.00* ! OV 0.99 PT 1.01 SC 1.01 TC 1.00* ! TS 1.00* WF 1.01 WZ 1.00* ! ! ! Fit before self-cal, rms=0.118915Jy sigma=0.001558 ! Fit after self-cal, rms=0.112217Jy sigma=0.001456 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.682 mas, bpa=-0.9095 degrees ! Estimated noise=786.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00890416 Jy ! Component: 100 - total flux cleaned = -0.0116171 Jy ! Total flux subtracted in 100 components = -0.0116171 Jy ! Clean residual min=-0.009840 max=0.006801 Jy/beam ! Clean residual mean=-0.000022 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 3.28511 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 114 components and 3.28511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111407Jy sigma=0.001446 ! Fit after self-cal, rms=0.111391Jy sigma=0.001446 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152701 Jy ! Component: 100 - total flux cleaned = -0.00265926 Jy ! Total flux subtracted in 100 components = -0.00265926 Jy ! Clean residual min=-0.009682 max=0.006763 Jy/beam ! Clean residual mean=-0.000024 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 3.28245 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 118 components and 3.28245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111033Jy sigma=0.001442 ! Fit after self-cal, rms=0.108557Jy sigma=0.001403 ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=8.679 mas, bpa=-0.8923 degrees ! Estimated noise=786.397 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00616221 Jy ! Component: 100 - total flux cleaned = -0.00745318 Jy ! Total flux subtracted in 100 components = -0.00745318 Jy ! Clean residual min=-0.008594 max=0.006372 Jy/beam ! Clean residual mean=-0.000012 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 3.27499 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 122 components and 3.27499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107923Jy sigma=0.001396 ! Fit after self-cal, rms=0.107919Jy sigma=0.001396 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1741-038_S ! Writing UV FITS file: 1741-038_S.uvf ! Writing 122 model components to file: 1741-038_S.mod ! wwins: Wrote 5 windows to 1741-038_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.989 x 8.679 at -0.8923 degrees (North through East) ! Clean map min=-0.0083581 max=2.9042 Jy/beam ! Writing clean map to FITS file: 1741-038_S.fits ! Writing difmap environment to: 1741-038_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1741-038_S] device 1741-038_Suv.ps/vps,1,2 ! Attempting to open device: '1741-038_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1741-038_Sim.ps/vps ! Attempting to open device: '1741-038_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=8.679 mas, bpa=-0.8923 degrees ! Estimated noise=786.397 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.989 x 8.679 at -0.8923 degrees (North through East) ! Clean map min=-0.0083581 max=2.9042 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 1741-038_S.log closed on Thu Jul 19 21:36:02 2007