! Started logfile: 1705+456_S.log on Thu Jul 19 21:25:02 2007 observe 1705+456_S.edt ! Reading UV FITS file: 1705+456_S.edt ! AN table 1: 53 integrations on 171 of 171 possible baselines. ! AN table 2: 22 integrations on 171 of 171 possible baselines. ! AN table 3: 57 integrations on 171 of 171 possible baselines. ! AN table 4: 148 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0986007 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1705+456 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1332 lines of history. ! ! Reading 18884 visibilities. ![@gonzo6-0.4 1705+456_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 670 telescope corrections were flagged in sub-array 1. ! A total of 412 telescope corrections were flagged in sub-array 2. ! A total of 1077 telescope corrections were flagged in sub-array 3. ! A total of 2363 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 645 telescope corrections were flagged in sub-array 1. ! A total of 412 telescope corrections were flagged in sub-array 2. ! A total of 1071 telescope corrections were flagged in sub-array 3. ! A total of 2332 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 636 telescope corrections were flagged in sub-array 1. ! A total of 414 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2344 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 683 telescope corrections were flagged in sub-array 1. ! A total of 418 telescope corrections were flagged in sub-array 2. ! A total of 1083 telescope corrections were flagged in sub-array 3. ! A total of 2375 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.687425Jy sigma=0.010652 ! Fit after self-cal, rms=0.685571Jy sigma=0.010667 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=3.019 mas, bpa=18.09 degrees ! Estimated noise=1092.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208342 Jy ! Total flux subtracted in 50 components = 0.208342 Jy ! Clean residual min=-0.013783 max=0.063355 Jy/beam ! Clean residual mean=0.000106 rms=0.003854 Jy/beam ! Combined flux in latest and established models = 0.208342 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.208342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165396Jy sigma=0.002572 ! Fit after self-cal, rms=0.165397Jy sigma=0.002572 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658906 Jy ! Total flux subtracted in 50 components = 0.0658906 Jy ! Clean residual min=-0.010151 max=0.031529 Jy/beam ! Clean residual mean=0.000077 rms=0.002649 Jy/beam ! Combined flux in latest and established models = 0.274233 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.274233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125035Jy sigma=0.001933 ! Fit after self-cal, rms=0.125036Jy sigma=0.001933 ! Inverting map ! Added new window around map position (2.4, 0.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363048 Jy ! Total flux subtracted in 50 components = 0.0363048 Jy ! Clean residual min=-0.008501 max=0.022349 Jy/beam ! Clean residual mean=0.000061 rms=0.002197 Jy/beam ! Combined flux in latest and established models = 0.310537 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.310537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108171Jy sigma=0.001664 ! Fit after self-cal, rms=0.108164Jy sigma=0.001663 ! Inverting map ! Added new window around map position (-3.2, -2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242006 Jy ! Total flux subtracted in 50 components = 0.0242006 Jy ! Clean residual min=-0.007730 max=0.016630 Jy/beam ! Clean residual mean=0.000051 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.334738 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.334738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099262Jy sigma=0.001521 ! Fit after self-cal, rms=0.099253Jy sigma=0.001521 ! Inverting map ! Added new window around map position (-8.4, -4.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190221 Jy ! Total flux subtracted in 50 components = 0.0190221 Jy ! Clean residual min=-0.007607 max=0.010627 Jy/beam ! Clean residual mean=0.000043 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.35376 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.35376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093286Jy sigma=0.001419 ! Fit after self-cal, rms=0.093123Jy sigma=0.001417 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150088 Jy ! Total flux subtracted in 50 components = 0.0150088 Jy ! Clean residual min=-0.007346 max=0.009014 Jy/beam ! Clean residual mean=0.000037 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.368769 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.368769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089048Jy sigma=0.001348 ! Fit after self-cal, rms=0.088977Jy sigma=0.001347 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=4.48 mas, bpa=26.32 degrees ! Estimated noise=534.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283612 Jy ! Component: 100 - total flux cleaned = 0.0454989 Jy ! Total flux subtracted in 100 components = 0.0454989 Jy ! Clean residual min=-0.006416 max=0.012190 Jy/beam ! Clean residual mean=0.000354 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 0.414268 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 64 model components to the UV plane model. ! The established model now contains 124 components and 0.414268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080631Jy sigma=0.001199 ! Fit after self-cal, rms=0.080143Jy sigma=0.001192 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129393 Jy ! Component: 100 - total flux cleaned = 0.0209735 Jy ! Total flux subtracted in 100 components = 0.0209735 Jy ! Clean residual min=-0.005609 max=0.007667 Jy/beam ! Clean residual mean=0.000249 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.435241 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 151 components and 0.435241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078350Jy sigma=0.001157 ! Fit after self-cal, rms=0.078166Jy sigma=0.001155 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 GC 0.95 GG 1.00* ! HN 0.88 KP 0.88 LA 1.01 MA 1.00* ! MK 0.92 NL 1.01 NY 1.07 ON 1.00* ! OV 0.98 PT 0.98 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00* WZ 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 GC 1.09 GG 1.00* ! HN 1.00* KP 1.00* LA 0.82 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00* PT 0.86 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.12 GC 0.93 GG 1.00* ! HN 0.96 KP 0.90 LA 1.01 MA 1.00* ! MK 0.98 NL 0.97 NY 1.00* ON 1.00* ! OV 0.94 PT 0.99 SC 0.88 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 GC 0.96 GG 1.00* ! HN 1.00 KP 0.97 LA 0.96 MA 1.00* ! MK 1.26 NL 1.06 NY 1.09 ON 1.00* ! OV 1.01 PT 0.98 SC 1.00* TC 1.00* ! TS 0.99 WF 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.71 GC 0.68 GG 1.00* ! HN 0.73 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 0.51 NY 1.00* ON 1.00* ! OV 1.00* PT 1.13 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.65 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 FD 1.03 GC 0.93 GG 1.00* ! HN 0.99 KP 0.99 LA 0.96 MA 1.00* ! MK 1.03 NL 1.04 NY 1.00* ON 1.00* ! OV 1.06 PT 0.96 SC 0.93 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 GC 1.07 GG 1.00* ! HN 1.00 KP 0.96 LA 0.82 MA 1.00* ! MK 1.21 NL 1.08 NY 1.01 ON 1.00* ! OV 1.01 PT 1.01 SC 1.00* TC 1.00* ! TS 1.06 WF 1.00* WZ 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.89 GC 1.00* GG 1.00* ! HN 1.13 KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.44 NY 1.00* ON 1.00* ! OV 1.00* PT 0.87 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.00 GC 1.07 GG 1.00* ! HN 0.99 KP 0.98 LA 0.84 MA 1.00* ! MK 1.02 NL 1.05 NY 1.00* ON 1.00* ! OV 0.98 PT 1.00 SC 1.09 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.92 GC 1.10 GG 1.00* ! HN 1.00 KP 0.95 LA 0.79 MA 1.00* ! MK 1.01 NL 1.00 NY 1.07 ON 1.00* ! OV 0.88 PT 0.97 SC 1.00* TC 1.00* ! TS 1.04 WF 1.00* WZ 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.15 FD 0.92 GC 1.05 GG 1.00* ! HN 0.97 KP 0.98 LA 0.80 MA 1.00* ! MK 1.00 NL 1.03 NY 1.00* ON 1.00* ! OV 0.99 PT 0.99 SC 1.08 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.078166Jy sigma=0.001155 ! Fit after self-cal, rms=0.071862Jy sigma=0.001043 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=4.559 mas, bpa=26.34 degrees ! Estimated noise=534.843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.8, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761472 Jy ! Component: 100 - total flux cleaned = 0.0119453 Jy ! Total flux subtracted in 100 components = 0.0119453 Jy ! Clean residual min=-0.002970 max=0.003856 Jy/beam ! Clean residual mean=0.000084 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.447187 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 177 components and 0.447187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071234Jy sigma=0.001028 ! Fit after self-cal, rms=0.071161Jy sigma=0.001027 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.6, -21.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392571 Jy ! Component: 100 - total flux cleaned = 0.00628175 Jy ! Total flux subtracted in 100 components = 0.00628175 Jy ! Clean residual min=-0.002844 max=0.002862 Jy/beam ! Clean residual mean=0.000054 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.453468 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 192 components and 0.453468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070971Jy sigma=0.001024 ! Fit after self-cal, rms=0.066909Jy sigma=0.000959 ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=4.547 mas, bpa=25.87 degrees ! Estimated noise=535.43 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.4, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280772 Jy ! Component: 100 - total flux cleaned = 0.00456685 Jy ! Total flux subtracted in 100 components = 0.00456685 Jy ! Clean residual min=-0.002241 max=0.002414 Jy/beam ! Clean residual mean=0.000029 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.458035 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 208 components and 0.458035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066821Jy sigma=0.000957 ! Fit after self-cal, rms=0.066801Jy sigma=0.000957 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1705+456_S ! Writing UV FITS file: 1705+456_S.uvf ! Writing 208 model components to file: 1705+456_S.mod ! wwins: Wrote 7 windows to 1705+456_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.836 x 4.547 at 25.87 degrees (North through East) ! Clean map min=-0.0021933 max=0.29199 Jy/beam ! Writing clean map to FITS file: 1705+456_S.fits ! Writing difmap environment to: 1705+456_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1705+456_S] device 1705+456_Suv.ps/vps,1,2 ! Attempting to open device: '1705+456_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1705+456_Sim.ps/vps ! Attempting to open device: '1705+456_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=4.547 mas, bpa=25.87 degrees ! Estimated noise=535.43 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.836 x 4.547 at 25.87 degrees (North through East) ! Clean map min=-0.0021933 max=0.29199 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 1705+456_S.log closed on Thu Jul 19 21:25:18 2007