! Started logfile: 1451-375_S.log on Thu Jul 19 20:18:06 2007 observe 1451-375_S.edt ! Reading UV FITS file: 1451-375_S.edt ! AN table 1: 77 integrations on 171 of 171 possible baselines. ! AN table 2: 28 integrations on 171 of 171 possible baselines. ! AN table 3: 44 integrations on 171 of 171 possible baselines. ! AN table 4: 13 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0927731 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1451-375 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1340 lines of history. ! ! Reading 10280 visibilities. ![@gonzo5-0.4 1451-375_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1060 telescope corrections were flagged in sub-array 1. ! A total of 532 telescope corrections were flagged in sub-array 2. ! A total of 579 telescope corrections were flagged in sub-array 3. ! A total of 218 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1048 telescope corrections were flagged in sub-array 1. ! A total of 532 telescope corrections were flagged in sub-array 2. ! A total of 581 telescope corrections were flagged in sub-array 3. ! A total of 220 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1045 telescope corrections were flagged in sub-array 1. ! A total of 532 telescope corrections were flagged in sub-array 2. ! A total of 584 telescope corrections were flagged in sub-array 3. ! A total of 218 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1096 telescope corrections were flagged in sub-array 1. ! A total of 532 telescope corrections were flagged in sub-array 2. ! A total of 597 telescope corrections were flagged in sub-array 3. ! A total of 226 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.274805Jy sigma=0.003209 ! Fit after self-cal, rms=0.272378Jy sigma=0.003182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.336 mas, bmaj=6.52 mas, bpa=-2.664 degrees ! Estimated noise=2128.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.553768 Jy ! Total flux subtracted in 50 components = 0.553768 Jy ! Clean residual min=-0.040233 max=0.154745 Jy/beam ! Clean residual mean=-0.000121 rms=0.013321 Jy/beam ! Combined flux in latest and established models = 0.553768 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.553768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301379Jy sigma=0.003968 ! Fit after self-cal, rms=0.301379Jy sigma=0.003968 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147562 Jy ! Total flux subtracted in 50 components = 0.147562 Jy ! Clean residual min=-0.024294 max=0.064034 Jy/beam ! Clean residual mean=-0.000063 rms=0.007747 Jy/beam ! Combined flux in latest and established models = 0.70133 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.70133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194462Jy sigma=0.002571 ! Fit after self-cal, rms=0.194370Jy sigma=0.002571 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0740548 Jy ! Total flux subtracted in 50 components = 0.0740548 Jy ! Clean residual min=-0.016739 max=0.041160 Jy/beam ! Clean residual mean=-0.000034 rms=0.005565 Jy/beam ! Combined flux in latest and established models = 0.775385 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.775385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150248Jy sigma=0.001963 ! Fit after self-cal, rms=0.150124Jy sigma=0.001962 ! Inverting map ! Added new window around map position (-6, -6.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463337 Jy ! Total flux subtracted in 50 components = 0.0463337 Jy ! Clean residual min=-0.013463 max=0.028899 Jy/beam ! Clean residual mean=-0.000019 rms=0.004374 Jy/beam ! Combined flux in latest and established models = 0.821718 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.821718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127461Jy sigma=0.001635 ! Fit after self-cal, rms=0.127023Jy sigma=0.001632 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313322 Jy ! Total flux subtracted in 50 components = 0.0313322 Jy ! Clean residual min=-0.011718 max=0.024443 Jy/beam ! Clean residual mean=-0.000011 rms=0.003609 Jy/beam ! Combined flux in latest and established models = 0.85305 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.85305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114203Jy sigma=0.001441 ! Fit after self-cal, rms=0.113935Jy sigma=0.001440 ! Inverting map ! Added new window around map position (3.6, 6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252705 Jy ! Total flux subtracted in 50 components = 0.0252705 Jy ! Clean residual min=-0.010012 max=0.017163 Jy/beam ! Clean residual mean=-0.000005 rms=0.003028 Jy/beam ! Combined flux in latest and established models = 0.878321 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.878321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105474Jy sigma=0.001312 ! Fit after self-cal, rms=0.105445Jy sigma=0.001311 ! Inverting map ! Added new window around map position (-3.2, 1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020013 Jy ! Total flux subtracted in 50 components = 0.020013 Jy ! Clean residual min=-0.009013 max=0.014249 Jy/beam ! Clean residual mean=0.000000 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.898334 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.898334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099844Jy sigma=0.001224 ! Fit after self-cal, rms=0.099814Jy sigma=0.001224 ! Inverting map ! Added new window around map position (6.4, 0.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163986 Jy ! Total flux subtracted in 50 components = 0.0163986 Jy ! Clean residual min=-0.008285 max=0.010441 Jy/beam ! Clean residual mean=0.000003 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.914733 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.914733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096249Jy sigma=0.001168 ! Fit after self-cal, rms=0.096261Jy sigma=0.001167 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=9.527 mas, bpa=-4.353 degrees ! Estimated noise=737.351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272354 Jy ! Component: 100 - total flux cleaned = 0.0418459 Jy ! Total flux subtracted in 100 components = 0.0418459 Jy ! Clean residual min=-0.005918 max=0.010513 Jy/beam ! Clean residual mean=0.000029 rms=0.002150 Jy/beam ! Combined flux in latest and established models = 0.956578 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 137 components and 0.956579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090122Jy sigma=0.001068 ! Fit after self-cal, rms=0.089907Jy sigma=0.001066 ! Inverting map ! Added new window around map position (-10.4, -12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115376 Jy ! Component: 100 - total flux cleaned = 0.0177486 Jy ! Total flux subtracted in 100 components = 0.0177486 Jy ! Clean residual min=-0.004886 max=0.005036 Jy/beam ! Clean residual mean=0.000007 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.974327 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 165 components and 0.974327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088628Jy sigma=0.001048 ! Fit after self-cal, rms=0.088464Jy sigma=0.001046 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 0.99 LA 0.99 MA 1.00* ! MK 1.01 NL 1.02 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 1.01 NY 1.00* ON 1.00* ! OV 0.99 PT 0.99 SC 1.00 TC 1.03 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HN 1.02 KP 0.99 LA 1.00 MA 1.00* ! MK 1.00* NL 1.04 NY 1.00* ON 1.00* ! OV 1.00* PT 1.02 SC 1.02 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 1.00 MA 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 0.99 LA 0.99 MA 1.00* ! MK 1.00 NL 1.02 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.01 TC 1.12 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.11 KP 0.99 LA 0.98 MA 1.00* ! MK 1.00* NL 1.06 NY 1.00* ON 1.00* ! OV 1.00* PT 1.01 SC 0.98 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 1.00 MA 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.02 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 1.02 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 0.86 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.01 GC 1.00* GG 1.00* ! HN 1.03 KP 0.98 LA 0.99 MA 1.00* ! MK 1.00* NL 1.02 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.03 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.01 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HN 1.00* KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 1.01 NY 1.00* ON 1.00* ! OV 0.99 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00 GC 1.00* GG 1.00* ! HN 1.03 KP 1.00 LA 1.00 MA 1.00* ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.088464Jy sigma=0.001046 ! Fit after self-cal, rms=0.088172Jy sigma=0.001043 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=9.55 mas, bpa=-4.33 degrees ! Estimated noise=736.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218921 Jy ! Component: 100 - total flux cleaned = 0.00252265 Jy ! Total flux subtracted in 100 components = 0.00252265 Jy ! Clean residual min=-0.003901 max=0.004363 Jy/beam ! Clean residual mean=0.000004 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.97685 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 183 components and 0.976849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087977Jy sigma=0.001041 ! Fit after self-cal, rms=0.087934Jy sigma=0.001041 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53.6, 57.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350951 Jy ! Component: 100 - total flux cleaned = 0.00455776 Jy ! Total flux subtracted in 100 components = 0.00455776 Jy ! Clean residual min=-0.003948 max=0.003136 Jy/beam ! Clean residual mean=-0.000011 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.981407 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 200 components and 0.981407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087762Jy sigma=0.001038 ! Fit after self-cal, rms=0.087017Jy sigma=0.001029 ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=9.551 mas, bpa=-4.343 degrees ! Estimated noise=735.71 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172673 Jy ! Component: 100 - total flux cleaned = 0.00263103 Jy ! Total flux subtracted in 100 components = 0.00263103 Jy ! Clean residual min=-0.003347 max=0.003074 Jy/beam ! Clean residual mean=-0.000016 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.984038 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 212 components and 0.984038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086946Jy sigma=0.001029 ! Fit after self-cal, rms=0.086933Jy sigma=0.001028 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1451-375_S ! Writing UV FITS file: 1451-375_S.uvf ! Writing 212 model components to file: 1451-375_S.mod ! wwins: Wrote 7 windows to 1451-375_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 9.551 at -4.343 degrees (North through East) ! Clean map min=-0.0032126 max=0.74167 Jy/beam ! Writing clean map to FITS file: 1451-375_S.fits ! Writing difmap environment to: 1451-375_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1451-375_S] device 1451-375_Suv.ps/vps,1,2 ! Attempting to open device: '1451-375_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1451-375_Sim.ps/vps ! Attempting to open device: '1451-375_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=9.551 mas, bpa=-4.343 degrees ! Estimated noise=735.71 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 9.551 at -4.343 degrees (North through East) ! Clean map min=-0.0032126 max=0.74167 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file 1451-375_S.log closed on Thu Jul 19 20:18:21 2007