! Started logfile: 0420+417_S.log on Thu Jul 26 21:25:21 2007 observe 0420+417_S.edt ! Reading UV FITS file: 0420+417_S.edt ! AN table 1: 99 integrations on 171 of 171 possible baselines. ! AN table 2: 133 integrations on 171 of 171 possible baselines. ! AN table 3: 59 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.171701 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0420+417 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1344 lines of history. ! ! Reading 34176 visibilities. ![@gonzo5-0.4 0420+417_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1184 telescope corrections were flagged in sub-array 1. ! A total of 1773 telescope corrections were flagged in sub-array 2. ! A total of 952 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1184 telescope corrections were flagged in sub-array 1. ! A total of 1763 telescope corrections were flagged in sub-array 2. ! A total of 949 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1172 telescope corrections were flagged in sub-array 1. ! A total of 1764 telescope corrections were flagged in sub-array 2. ! A total of 953 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1185 telescope corrections were flagged in sub-array 1. ! A total of 1803 telescope corrections were flagged in sub-array 2. ! A total of 1005 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.405692Jy sigma=0.006817 ! Fit after self-cal, rms=0.391987Jy sigma=0.006539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=3.147 mas, bpa=9.29 degrees ! Estimated noise=804.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.52923 Jy ! Total flux subtracted in 50 components = 0.52923 Jy ! Clean residual min=-0.046011 max=0.181456 Jy/beam ! Clean residual mean=0.000593 rms=0.012342 Jy/beam ! Combined flux in latest and established models = 0.52923 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.52923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441378Jy sigma=0.008357 ! Fit after self-cal, rms=0.441157Jy sigma=0.008353 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195221 Jy ! Total flux subtracted in 50 components = 0.195221 Jy ! Clean residual min=-0.035724 max=0.125531 Jy/beam ! Clean residual mean=0.000449 rms=0.008794 Jy/beam ! Combined flux in latest and established models = 0.724451 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.724451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316814Jy sigma=0.005959 ! Fit after self-cal, rms=0.316516Jy sigma=0.005952 ! Inverting map ! Added new window around map position (-3.6, -0.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122923 Jy ! Total flux subtracted in 50 components = 0.122923 Jy ! Clean residual min=-0.030155 max=0.108588 Jy/beam ! Clean residual mean=0.000356 rms=0.006814 Jy/beam ! Combined flux in latest and established models = 0.847374 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.847374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249711Jy sigma=0.004642 ! Fit after self-cal, rms=0.246469Jy sigma=0.004592 ! Inverting map ! Added new window around map position (4, 1.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0943829 Jy ! Total flux subtracted in 50 components = 0.0943829 Jy ! Clean residual min=-0.021913 max=0.049596 Jy/beam ! Clean residual mean=0.000284 rms=0.005073 Jy/beam ! Combined flux in latest and established models = 0.941757 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.941757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199752Jy sigma=0.003659 ! Fit after self-cal, rms=0.199564Jy sigma=0.003657 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0648682 Jy ! Total flux subtracted in 50 components = 0.0648682 Jy ! Clean residual min=-0.019134 max=0.037452 Jy/beam ! Clean residual mean=0.000234 rms=0.004178 Jy/beam ! Combined flux in latest and established models = 1.00663 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 1.00663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169768Jy sigma=0.003038 ! Fit after self-cal, rms=0.169616Jy sigma=0.003037 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0505991 Jy ! Total flux subtracted in 50 components = 0.0505991 Jy ! Clean residual min=-0.017087 max=0.029744 Jy/beam ! Clean residual mean=0.000196 rms=0.003536 Jy/beam ! Combined flux in latest and established models = 1.05722 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 1.05722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148288Jy sigma=0.002584 ! Fit after self-cal, rms=0.148143Jy sigma=0.002583 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400621 Jy ! Total flux subtracted in 50 components = 0.0400621 Jy ! Clean residual min=-0.015635 max=0.023682 Jy/beam ! Clean residual mean=0.000165 rms=0.003065 Jy/beam ! Combined flux in latest and established models = 1.09729 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 1.09729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132847Jy sigma=0.002250 ! Fit after self-cal, rms=0.132756Jy sigma=0.002249 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321117 Jy ! Total flux subtracted in 50 components = 0.0321117 Jy ! Clean residual min=-0.014594 max=0.018959 Jy/beam ! Clean residual mean=0.000140 rms=0.002724 Jy/beam ! Combined flux in latest and established models = 1.1294 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 1.1294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122002Jy sigma=0.002008 ! Fit after self-cal, rms=0.121943Jy sigma=0.002008 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259861 Jy ! Total flux subtracted in 50 components = 0.0259861 Jy ! Clean residual min=-0.014283 max=0.015720 Jy/beam ! Clean residual mean=0.000120 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 1.15538 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 1.15538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114396Jy sigma=0.001835 ! Fit after self-cal, rms=0.114353Jy sigma=0.001835 ! Inverting map ! Added new window around map position (-3.6, -4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213263 Jy ! Total flux subtracted in 50 components = 0.0213263 Jy ! Clean residual min=-0.014028 max=0.012701 Jy/beam ! Clean residual mean=0.000103 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 1.17671 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 1.17671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109099Jy sigma=0.001713 ! Fit after self-cal, rms=0.109051Jy sigma=0.001713 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=4.617 mas, bpa=1.458 degrees ! Estimated noise=290.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346938 Jy ! Component: 100 - total flux cleaned = 0.0543867 Jy ! Total flux subtracted in 100 components = 0.0543867 Jy ! Clean residual min=-0.012597 max=0.015085 Jy/beam ! Clean residual mean=0.000036 rms=0.002519 Jy/beam ! Combined flux in latest and established models = 1.2311 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 108 components and 1.2311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099771Jy sigma=0.001490 ! Fit after self-cal, rms=0.099331Jy sigma=0.001485 ! Inverting map ! Added new window around map position (-13.6, -4.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169087 Jy ! Component: 100 - total flux cleaned = 0.0271692 Jy ! Total flux subtracted in 100 components = 0.0271692 Jy ! Clean residual min=-0.012777 max=0.009583 Jy/beam ! Clean residual mean=0.000026 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 1.25827 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 1.25827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096676Jy sigma=0.001424 ! Fit after self-cal, rms=0.096327Jy sigma=0.001420 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 GG 1.00* ! HN 0.99 KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.03 ON 1.03 ! OV 0.99 PT 0.99 SC 1.01 TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 GC 1.00* GG 1.00* ! HN 0.99 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.02 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 GG 1.00* ! HN 0.99 KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.03 ON 1.04 ! OV 0.99 PT 0.99 SC 1.01 TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.01 GG 1.00* ! HN 0.99 KP 1.00 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.04 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 GG 1.00* ! HN 0.99 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.03 ON 1.04 ! OV 1.00 PT 0.99 SC 1.02 TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 GC 1.01 GG 1.00* ! HN 1.00 KP 1.00 LA 0.99 MA 1.00* ! MK 0.99 NL 0.98 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 GC 1.00* GG 1.00* ! HN 1.00 KP 0.98 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.03 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 GG 1.00* ! HN 0.99 KP 1.00 LA 0.98 MA 1.00* ! MK 0.99 NL 0.98 NY 1.03 ON 1.04 ! OV 1.00 PT 0.99 SC 1.02 TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 GC 1.01 GG 1.00* ! HN 1.00 KP 1.00 LA 0.99 MA 1.00* ! MK 0.99 NL 0.98 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 GC 1.00* GG 1.00* ! HN 0.98 KP 0.99 LA 0.99 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.04 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.096327Jy sigma=0.001420 ! Fit after self-cal, rms=0.095636Jy sigma=0.001405 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=4.646 mas, bpa=1.07 degrees ! Estimated noise=288.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231883 Jy ! Component: 100 - total flux cleaned = 0.00549752 Jy ! Total flux subtracted in 100 components = 0.00549752 Jy ! Clean residual min=-0.011312 max=0.007855 Jy/beam ! Clean residual mean=0.000020 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 1.26376 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 133 components and 1.26376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094579Jy sigma=0.001383 ! Fit after self-cal, rms=0.094366Jy sigma=0.001381 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023261 Jy ! Component: 100 - total flux cleaned = 0.00340442 Jy ! Total flux subtracted in 100 components = 0.00340442 Jy ! Clean residual min=-0.010821 max=0.006762 Jy/beam ! Clean residual mean=0.000018 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 1.26717 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 1.26717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093742Jy sigma=0.001369 ! Fit after self-cal, rms=0.092943Jy sigma=0.001357 ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=4.646 mas, bpa=0.8265 degrees ! Estimated noise=288.518 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121045 Jy ! Component: 100 - total flux cleaned = 0.00234114 Jy ! Total flux subtracted in 100 components = 0.00234114 Jy ! Clean residual min=-0.009907 max=0.006264 Jy/beam ! Clean residual mean=0.000022 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 1.26951 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 143 components and 1.26951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092498Jy sigma=0.001348 ! Fit after self-cal, rms=0.092389Jy sigma=0.001347 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0420+417_S ! Writing UV FITS file: 0420+417_S.uvf ! Writing 143 model components to file: 0420+417_S.mod ! wwins: Wrote 5 windows to 0420+417_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.27 x 4.646 at 0.8265 degrees (North through East) ! Clean map min=-0.013337 max=0.70816 Jy/beam ! Writing clean map to FITS file: 0420+417_S.fits ! Writing difmap environment to: 0420+417_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0420+417_S] device 0420+417_Suv.ps/vps,1,2 ! Attempting to open device: '0420+417_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0420+417_Sim.ps/vps ! Attempting to open device: '0420+417_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=4.646 mas, bpa=0.8265 degrees ! Estimated noise=288.518 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.27 x 4.646 at 0.8265 degrees (North through East) ! Clean map min=-0.013337 max=0.70816 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file 0420+417_S.log closed on Thu Jul 26 21:26:07 2007