! Started logfile: 0133+476_S.log on Thu Jul 12 22:46:40 2007 observe 0133+476_S.edt ! Reading UV FITS file: 0133+476_S.edt ! AN table 1: 42 integrations on 171 of 171 possible baselines. ! AN table 2: 60 integrations on 171 of 171 possible baselines. ! AN table 3: 13 integrations on 171 of 171 possible baselines. ! AN table 4: 56 integrations on 171 of 171 possible baselines. ! AN table 5: 20 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.183858 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0133+476 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1336 lines of history. ! ! Reading 24020 visibilities. ![@gonzo5-0.4 0133+476_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 718 telescope corrections were flagged in sub-array 1. ! A total of 961 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 732 telescope corrections were flagged in sub-array 4. ! A total of 200 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 715 telescope corrections were flagged in sub-array 1. ! A total of 958 telescope corrections were flagged in sub-array 2. ! A total of 154 telescope corrections were flagged in sub-array 3. ! A total of 935 telescope corrections were flagged in sub-array 4. ! A total of 199 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 719 telescope corrections were flagged in sub-array 1. ! A total of 973 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 725 telescope corrections were flagged in sub-array 4. ! A total of 206 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! A total of 1020 telescope corrections were flagged in sub-array 2. ! A total of 163 telescope corrections were flagged in sub-array 3. ! A total of 767 telescope corrections were flagged in sub-array 4. ! A total of 199 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.407091Jy sigma=0.007893 ! Fit after self-cal, rms=0.407321Jy sigma=0.007902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.015 mas, bmaj=3.279 mas, bpa=-0.4274 degrees ! Estimated noise=801.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.923985 Jy ! Total flux subtracted in 50 components = 0.923985 Jy ! Clean residual min=-0.036026 max=0.257761 Jy/beam ! Clean residual mean=-0.000139 rms=0.011983 Jy/beam ! Combined flux in latest and established models = 0.923985 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.923985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462987Jy sigma=0.008974 ! Fit after self-cal, rms=0.462988Jy sigma=0.008974 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.25741 Jy ! Total flux subtracted in 50 components = 0.25741 Jy ! Clean residual min=-0.019757 max=0.113806 Jy/beam ! Clean residual mean=-0.000090 rms=0.006926 Jy/beam ! Combined flux in latest and established models = 1.1814 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.1814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283911Jy sigma=0.005470 ! Fit after self-cal, rms=0.283453Jy sigma=0.005465 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133984 Jy ! Total flux subtracted in 50 components = 0.133984 Jy ! Clean residual min=-0.014552 max=0.069618 Jy/beam ! Clean residual mean=-0.000065 rms=0.004745 Jy/beam ! Combined flux in latest and established models = 1.31538 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 1.31538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202489Jy sigma=0.003817 ! Fit after self-cal, rms=0.202156Jy sigma=0.003813 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862425 Jy ! Total flux subtracted in 50 components = 0.0862425 Jy ! Clean residual min=-0.011670 max=0.046106 Jy/beam ! Clean residual mean=-0.000048 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 1.40162 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 1.40162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156078Jy sigma=0.002835 ! Fit after self-cal, rms=0.155868Jy sigma=0.002834 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579316 Jy ! Total flux subtracted in 50 components = 0.0579316 Jy ! Clean residual min=-0.009639 max=0.031195 Jy/beam ! Clean residual mean=-0.000037 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 1.45955 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 1.45955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129354Jy sigma=0.002241 ! Fit after self-cal, rms=0.129198Jy sigma=0.002240 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395466 Jy ! Total flux subtracted in 50 components = 0.0395466 Jy ! Clean residual min=-0.008087 max=0.022038 Jy/beam ! Clean residual mean=-0.000030 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 1.4991 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 1.4991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114384Jy sigma=0.001889 ! Fit after self-cal, rms=0.114248Jy sigma=0.001888 ! Inverting map ! Added new window around map position (-2, 1.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274198 Jy ! Total flux subtracted in 50 components = 0.0274198 Jy ! Clean residual min=-0.007394 max=0.015167 Jy/beam ! Clean residual mean=-0.000025 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 1.52652 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 1.52652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106159Jy sigma=0.001686 ! Fit after self-cal, rms=0.106027Jy sigma=0.001685 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195786 Jy ! Total flux subtracted in 50 components = 0.0195786 Jy ! Clean residual min=-0.006889 max=0.012635 Jy/beam ! Clean residual mean=-0.000021 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 1.5461 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 1.5461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101534Jy sigma=0.001568 ! Fit after self-cal, rms=0.101436Jy sigma=0.001567 ! Inverting map ! Added new window around map position (-4.8, 4.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148868 Jy ! Total flux subtracted in 50 components = 0.0148868 Jy ! Clean residual min=-0.006486 max=0.009139 Jy/beam ! Clean residual mean=-0.000019 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 1.56099 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 1.56099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098755Jy sigma=0.001496 ! Fit after self-cal, rms=0.098662Jy sigma=0.001495 ! Inverting map ! Added new window around map position (-2.4, 8.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116116 Jy ! Total flux subtracted in 50 components = 0.0116116 Jy ! Clean residual min=-0.006153 max=0.007960 Jy/beam ! Clean residual mean=-0.000016 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 1.5726 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 1.5726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096941Jy sigma=0.001448 ! Fit after self-cal, rms=0.096881Jy sigma=0.001448 ! Inverting map ! Added new window around map position (0.8, 7.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00960003 Jy ! Total flux subtracted in 50 components = 0.00960003 Jy ! Clean residual min=-0.005809 max=0.007216 Jy/beam ! Clean residual mean=-0.000014 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 1.5822 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 1.5822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095689Jy sigma=0.001415 ! Fit after self-cal, rms=0.095643Jy sigma=0.001415 ! Inverting map ! Added new window around map position (-5.2, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00816053 Jy ! Total flux subtracted in 50 components = 0.00816053 Jy ! Clean residual min=-0.005582 max=0.006927 Jy/beam ! Clean residual mean=-0.000013 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 1.59036 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 1.59036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094762Jy sigma=0.001391 ! Fit after self-cal, rms=0.094724Jy sigma=0.001390 ! Inverting map ! Added new window around map position (-8.8, 20.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733549 Jy ! Total flux subtracted in 50 components = 0.00733549 Jy ! Clean residual min=-0.005441 max=0.006237 Jy/beam ! Clean residual mean=-0.000012 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 1.59769 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 1.59769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094116Jy sigma=0.001375 ! Fit after self-cal, rms=0.094099Jy sigma=0.001375 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=3.905 mas, bpa=6.654 degrees ! Estimated noise=413.313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129359 Jy ! Component: 100 - total flux cleaned = 0.0215129 Jy ! Total flux subtracted in 100 components = 0.0215129 Jy ! Clean residual min=-0.004436 max=0.006831 Jy/beam ! Clean residual mean=0.000495 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 1.61921 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 117 components and 1.61921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092519Jy sigma=0.001333 ! Fit after self-cal, rms=0.092384Jy sigma=0.001329 ! Inverting map ! Added new window around map position (3.2, 12.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786746 Jy ! Component: 100 - total flux cleaned = 0.0134325 Jy ! Total flux subtracted in 100 components = 0.0134325 Jy ! Clean residual min=-0.003853 max=0.005022 Jy/beam ! Clean residual mean=0.000419 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 1.63264 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 142 components and 1.63264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091738Jy sigma=0.001314 ! Fit after self-cal, rms=0.091670Jy sigma=0.001312 ! Inverting map ! Added new window around map position (-8.4, 11.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556669 Jy ! Component: 100 - total flux cleaned = 0.00978401 Jy ! Total flux subtracted in 100 components = 0.00978401 Jy ! Clean residual min=-0.003557 max=0.004127 Jy/beam ! Clean residual mean=0.000363 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 1.64242 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 1.64242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091319Jy sigma=0.001304 ! Fit after self-cal, rms=0.091288Jy sigma=0.001304 ! Inverting map ! Added new window around map position (-1.2, 24.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043042 Jy ! Component: 100 - total flux cleaned = 0.00757436 Jy ! Total flux subtracted in 100 components = 0.00757436 Jy ! Clean residual min=-0.003372 max=0.003577 Jy/beam ! Clean residual mean=0.000319 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 1.65 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 173 components and 1.65 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091046Jy sigma=0.001299 ! Fit after self-cal, rms=0.091030Jy sigma=0.001299 ! Inverting map ! Added new window around map position (-3.2, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300078 Jy ! Component: 100 - total flux cleaned = 0.00504876 Jy ! Total flux subtracted in 100 components = 0.00504876 Jy ! Clean residual min=-0.003183 max=0.003054 Jy/beam ! Clean residual mean=0.000290 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 1.65505 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 1.65505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090875Jy sigma=0.001296 ! Fit after self-cal, rms=0.090869Jy sigma=0.001296 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 GC 1.00 GG 1.00* ! HN 1.01 KP 1.01 LA 0.99 MA 1.00* ! MK 1.00 NL 0.99 NY 1.00 ON 1.00* ! OV 1.01 PT 1.00 SC 1.00* TC 1.00* ! TS 1.01 WF 1.02 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00 LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 0.99 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 GC 1.00 GG 1.00* ! HN 1.01 KP 0.99 LA 1.00 MA 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.97 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 0.99 LA 1.00 MA 0.98 ! MK 1.01 NL 0.99 NY 0.99 ON 0.95 ! OV 1.00 PT 1.00 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.00 GC 1.01 GG 1.00* ! HN 1.00 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.01 ON 1.01 ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 GC 1.00 GG 1.00* ! HN 1.01 KP 1.01 LA 1.00 MA 1.00* ! MK 1.00 NL 0.99 NY 1.00 ON 1.00* ! OV 0.99 PT 1.01 SC 1.00* TC 1.00* ! TS 1.01 WF 1.01 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 0.99 LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00 LA 0.99 MA 1.00* ! MK 1.01 NL 1.00 NY 1.00* ON 1.00* ! OV 1.01 PT 1.00 SC 1.00* TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00* GG 1.00* ! HN 1.00 KP 0.99 LA 1.00 MA 1.00 ! MK 1.00* NL 1.00 NY 0.99 ON 0.90 ! OV 1.00 PT 1.00 SC 1.01 TC 1.00* ! TS 1.00* WF 0.99 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.01 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 1.01 WF 1.01 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 GC 1.00 GG 1.00* ! HN 1.01 KP 1.01 LA 0.98 MA 1.00* ! MK 1.00 NL 0.99 NY 0.99 ON 1.00* ! OV 0.96 PT 1.00 SC 1.00* TC 1.00* ! TS 1.02 WF 1.01 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 GC 1.02 GG 1.00* ! HN 1.00 KP 1.00 LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.01 TC 1.00* ! TS 1.00* WF 1.00 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 GC 1.00 GG 1.00* ! HN 1.01 KP 1.00 LA 0.99 MA 1.00* ! MK 0.99 NL 1.00 NY 1.00* ON 1.00* ! OV 1.01 PT 0.98 SC 1.00* TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00 LA 1.00 MA 1.01 ! MK 1.00 NL 0.99 NY 0.96 ON 0.99 ! OV 1.00 PT 1.00 SC 1.00 TC 1.00* ! TS 1.00* WF 1.00 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.01 NY 1.01 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 1.01 WF 1.00 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 GC 0.99 GG 1.00* ! HN 1.00 KP 1.01 LA 1.03 MA 1.00* ! MK 1.00 NL 0.96 NY 1.02 ON 1.00* ! OV 0.98 PT 1.01 SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.99 GC 1.02 GG 1.00* ! HN 1.00 KP 1.00 LA 1.00 MA 1.00* ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00 SC 1.01 TC 1.00* ! TS 1.00* WF 0.99 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 GC 1.00 GG 1.00* ! HN 0.99 KP 1.00 LA 1.00* MA 1.00* ! MK 0.99 NL 1.00 NY 1.00* ON 1.00* ! OV 0.98 PT 0.99 SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.00 GC 1.00 GG 1.00* ! HN 0.99 KP 1.00 LA 0.95 MA 1.00 ! MK 1.01 NL 0.99 NY 0.97 ON 1.01 ! OV 1.00 PT 1.00 SC 1.02 TC 1.00* ! TS 1.00* WF 1.01 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.01 GC 1.01 GG 1.00* ! HN 1.00 KP 1.00* LA 0.99 MA 1.00* ! MK 1.00* NL 1.01 NY 1.03 ON 1.02 ! OV 1.00 PT 1.01 SC 1.00* TC 1.00* ! TS 1.01 WF 1.02 WZ 1.00* ! ! ! Fit before self-cal, rms=0.090869Jy sigma=0.001296 ! Fit after self-cal, rms=0.090110Jy sigma=0.001276 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=3.91 mas, bpa=6.716 degrees ! Estimated noise=414.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.4, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221039 Jy ! Component: 100 - total flux cleaned = 0.00341474 Jy ! Total flux subtracted in 100 components = 0.00341474 Jy ! Clean residual min=-0.002564 max=0.002795 Jy/beam ! Clean residual mean=0.000285 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.65846 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 208 components and 1.65846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089979Jy sigma=0.001274 ! Fit after self-cal, rms=0.089970Jy sigma=0.001273 ! Inverting map ! Added new window around map position (-100.4, 79.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212916 Jy ! Component: 100 - total flux cleaned = 0.00333468 Jy ! Total flux subtracted in 100 components = 0.00333468 Jy ! Clean residual min=-0.002546 max=0.002654 Jy/beam ! Clean residual mean=0.000270 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.6618 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 221 components and 1.6618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089876Jy sigma=0.001272 ! Fit after self-cal, rms=0.089871Jy sigma=0.001271 ! Inverting map ! Added new window around map position (18, 10.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022896 Jy ! Component: 100 - total flux cleaned = 0.00348669 Jy ! Total flux subtracted in 100 components = 0.00348669 Jy ! Clean residual min=-0.002582 max=0.002712 Jy/beam ! Clean residual mean=0.000251 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 1.66528 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 230 components and 1.66528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089772Jy sigma=0.001270 ! Fit after self-cal, rms=0.089774Jy sigma=0.001270 ! Inverting map ! Added new window around map position (-26.8, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245112 Jy ! Component: 100 - total flux cleaned = 0.00358799 Jy ! Total flux subtracted in 100 components = 0.00358799 Jy ! Clean residual min=-0.002544 max=0.002612 Jy/beam ! Clean residual mean=0.000230 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 1.66887 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 239 components and 1.66887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089683Jy sigma=0.001269 ! Fit after self-cal, rms=0.089682Jy sigma=0.001269 ! Inverting map ! Added new window around map position (100.4, 84). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206966 Jy ! Component: 100 - total flux cleaned = 0.00277968 Jy ! Total flux subtracted in 100 components = 0.00277968 Jy ! Clean residual min=-0.002481 max=0.002387 Jy/beam ! Clean residual mean=0.000216 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 1.67165 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 246 components and 1.67165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089608Jy sigma=0.001267 ! Fit after self-cal, rms=0.089608Jy sigma=0.001267 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569498 Jy ! Component: 100 - total flux cleaned = 0.000985986 Jy ! Total flux subtracted in 100 components = 0.000985986 Jy ! Clean residual min=-0.002460 max=0.002372 Jy/beam ! Clean residual mean=0.000211 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 1.67264 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 256 components and 1.67264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089566Jy sigma=0.001267 ! Fit after self-cal, rms=0.088285Jy sigma=0.001234 ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=3.912 mas, bpa=6.704 degrees ! Estimated noise=414.521 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130112 Jy ! Component: 100 - total flux cleaned = 0.00200432 Jy ! Total flux subtracted in 100 components = 0.00200432 Jy ! Clean residual min=-0.002324 max=0.002238 Jy/beam ! Clean residual mean=0.000222 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 1.67464 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 272 components and 1.67464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088228Jy sigma=0.001233 ! Fit after self-cal, rms=0.088216Jy sigma=0.001233 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0133+476_S ! Writing UV FITS file: 0133+476_S.uvf ! Writing 272 model components to file: 0133+476_S.mod ! wwins: Wrote 16 windows to 0133+476_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.638 x 3.912 at 6.704 degrees (North through East) ! Clean map min=-0.0022533 max=1.2604 Jy/beam ! Writing clean map to FITS file: 0133+476_S.fits ! Writing difmap environment to: 0133+476_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0133+476_S] device 0133+476_Suv.ps/vps,1,2 ! Attempting to open device: '0133+476_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0133+476_Sim.ps/vps ! Attempting to open device: '0133+476_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=3.912 mas, bpa=6.704 degrees ! Estimated noise=414.521 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.638 x 3.912 at 6.704 degrees (North through East) ! Clean map min=-0.0022533 max=1.2604 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file 0133+476_S.log closed on Thu Jul 12 22:47:04 2007