! Started logfile: 0059+581_S.log on Thu Jul 12 22:10:20 2007 observe 0059+581_S.edt ! Reading UV FITS file: 0059+581_S.edt ! AN table 1: 6 integrations on 171 of 171 possible baselines. ! AN table 2: 13 integrations on 171 of 171 possible baselines. ! AN table 3: 33 integrations on 171 of 171 possible baselines. ! AN table 4: 24 integrations on 171 of 171 possible baselines. ! AN table 5: 72 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.306543 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0059+581 ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! Warning: Unknown AN-table MNTSTA value (3). ! Will assume that it is ground-based. ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1336 lines of history. ! ! Reading 31032 visibilities. ![@gonzo6-0.4 0059+581_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 510 telescope corrections were flagged in sub-array 3. ! A total of 364 telescope corrections were flagged in sub-array 4. ! A total of 1368 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 121 telescope corrections were flagged in sub-array 2. ! A total of 503 telescope corrections were flagged in sub-array 3. ! A total of 359 telescope corrections were flagged in sub-array 4. ! A total of 1368 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! A total of 509 telescope corrections were flagged in sub-array 3. ! A total of 348 telescope corrections were flagged in sub-array 4. ! A total of 1368 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 511 telescope corrections were flagged in sub-array 3. ! A total of 363 telescope corrections were flagged in sub-array 4. ! A total of 837 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.673066Jy sigma=0.012610 ! Fit after self-cal, rms=0.675176Jy sigma=0.012662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=2.984 mas, bpa=34.97 degrees ! Estimated noise=842.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21066 Jy ! Total flux subtracted in 50 components = 1.21066 Jy ! Clean residual min=-0.038512 max=0.337676 Jy/beam ! Clean residual mean=-0.000283 rms=0.013943 Jy/beam ! Combined flux in latest and established models = 1.21066 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.21066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484856Jy sigma=0.009086 ! Fit after self-cal, rms=0.484857Jy sigma=0.009086 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288774 Jy ! Total flux subtracted in 50 components = 0.288774 Jy ! Clean residual min=-0.022786 max=0.114654 Jy/beam ! Clean residual mean=-0.000172 rms=0.007133 Jy/beam ! Combined flux in latest and established models = 1.49944 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.49943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271629Jy sigma=0.004905 ! Fit after self-cal, rms=0.271604Jy sigma=0.004905 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126704 Jy ! Total flux subtracted in 50 components = 0.126704 Jy ! Clean residual min=-0.017746 max=0.061969 Jy/beam ! Clean residual mean=-0.000123 rms=0.004927 Jy/beam ! Combined flux in latest and established models = 1.62614 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 1.62614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202897Jy sigma=0.003457 ! Fit after self-cal, rms=0.202832Jy sigma=0.003456 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726887 Jy ! Total flux subtracted in 50 components = 0.0726887 Jy ! Clean residual min=-0.015205 max=0.036995 Jy/beam ! Clean residual mean=-0.000096 rms=0.003963 Jy/beam ! Combined flux in latest and established models = 1.69883 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 1.69883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171960Jy sigma=0.002812 ! Fit after self-cal, rms=0.171909Jy sigma=0.002811 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444771 Jy ! Total flux subtracted in 50 components = 0.0444771 Jy ! Clean residual min=-0.015017 max=0.022939 Jy/beam ! Clean residual mean=-0.000079 rms=0.003543 Jy/beam ! Combined flux in latest and established models = 1.7433 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 1.7433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157311Jy sigma=0.002525 ! Fit after self-cal, rms=0.157247Jy sigma=0.002524 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279205 Jy ! Total flux subtracted in 50 components = 0.0279205 Jy ! Clean residual min=-0.015300 max=0.018264 Jy/beam ! Clean residual mean=-0.000068 rms=0.003362 Jy/beam ! Combined flux in latest and established models = 1.77123 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 1.77123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150131Jy sigma=0.002399 ! Fit after self-cal, rms=0.150080Jy sigma=0.002399 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=3.662 mas, bpa=31.7 degrees ! Estimated noise=512.349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349016 Jy ! Component: 100 - total flux cleaned = 0.0532371 Jy ! Total flux subtracted in 100 components = 0.0532371 Jy ! Clean residual min=-0.015254 max=0.021808 Jy/beam ! Clean residual mean=-0.000115 rms=0.003881 Jy/beam ! Combined flux in latest and established models = 1.82446 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 1.82446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141189Jy sigma=0.002300 ! Fit after self-cal, rms=0.141099Jy sigma=0.002299 ! Inverting map ! Added new window around map position (-6.4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152497 Jy ! Component: 100 - total flux cleaned = 0.0186933 Jy ! Total flux subtracted in 100 components = 0.0186933 Jy ! Clean residual min=-0.015689 max=0.019117 Jy/beam ! Clean residual mean=-0.000105 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 1.84316 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 1.84316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138106Jy sigma=0.002262 ! Fit after self-cal, rms=0.137814Jy sigma=0.002257 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 GC 0.96 GG 1.00* ! HN 0.96 KP 0.96 LA 0.96 MA 1.00 ! MK 0.97 NL 0.96 NY 0.98 ON 0.97 ! OV 0.96 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 0.97 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 0.99 GG 1.00* ! HN 1.00 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 0.99 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 GG 1.00* ! HN 1.00 KP 1.00 LA 1.00 MA 1.00* ! MK 1.00* NL 0.98 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* TC 1.00* ! TS 0.98 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 GC 0.95 GG 1.00* ! HN 0.96 KP 0.96 LA 0.96 MA 1.01 ! MK 0.97 NL 0.96 NY 0.98 ON 0.98 ! OV 0.96 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 0.97 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 0.98 GG 1.00* ! HN 0.99 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.01 GC 1.01 GG 1.00* ! HN 1.01 KP 1.01 LA 1.01 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.01 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.96 GC 0.98 GG 1.00* ! HN 0.96 KP 0.96 LA 0.96 MA 0.99 ! MK 0.98 NL 0.96 NY 0.98 ON 0.98 ! OV 0.96 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 0.99 GG 1.00* ! HN 0.99 KP 1.00* LA 1.00 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 0.99 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.01 GC 1.01 GG 1.00* ! HN 1.02 KP 1.01 LA 1.01 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.01 SC 1.00* TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HN 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 GC 0.97 GG 1.00* ! HN 0.97 KP 0.96 LA 0.96 MA 1.00 ! MK 0.98 NL 0.97 NY 0.98 ON 0.99 ! OV 0.96 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GC 0.99 GG 1.00* ! HN 0.99 KP 1.00* LA 0.99 MA 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00* TC 1.00* ! TS 1.02 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.03 GC 1.03 GG 1.00* ! HN 1.05 KP 1.03 LA 1.00* MA 1.00* ! MK 1.00* NL 1.03 NY 1.00* ON 1.00* ! OV 1.01 PT 1.04 SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.03 GC 1.03 GG 1.00* ! HN 1.02 KP 1.04 LA 1.02 MA 1.03 ! MK 1.02 NL 1.03 NY 1.03 ON 1.03 ! OV 1.03 PT 1.04 SC 1.04 TC 1.00* ! TS 1.02 WF 1.03 WZ 1.03 ! ! ! Fit before self-cal, rms=0.137814Jy sigma=0.002257 ! Fit after self-cal, rms=0.099069Jy sigma=0.001413 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=3.699 mas, bpa=32.16 degrees ! Estimated noise=513.963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167694 Jy ! Component: 100 - total flux cleaned = -0.00219177 Jy ! Total flux subtracted in 100 components = -0.00219177 Jy ! Clean residual min=-0.004340 max=0.004154 Jy/beam ! Clean residual mean=-0.000006 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 1.84096 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 1.84096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098761Jy sigma=0.001405 ! Fit after self-cal, rms=0.098726Jy sigma=0.001405 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21961e-05 Jy ! Component: 100 - total flux cleaned = -8.91053e-06 Jy ! Total flux subtracted in 100 components = -8.91053e-06 Jy ! Clean residual min=-0.004252 max=0.003974 Jy/beam ! Clean residual mean=-0.000006 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.84095 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 1.84095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098518Jy sigma=0.001401 ! Fit after self-cal, rms=0.096354Jy sigma=0.001359 ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=3.7 mas, bpa=32.06 degrees ! Estimated noise=513.717 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146668 Jy ! Component: 100 - total flux cleaned = -0.0014728 Jy ! Total flux subtracted in 100 components = -0.0014728 Jy ! Clean residual min=-0.004000 max=0.003193 Jy/beam ! Clean residual mean=-0.000006 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 1.83948 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 1.83948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096151Jy sigma=0.001354 ! Fit after self-cal, rms=0.096127Jy sigma=0.001354 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0059+581_S ! Writing UV FITS file: 0059+581_S.uvf ! Writing 95 model components to file: 0059+581_S.mod ! wwins: Wrote 2 windows to 0059+581_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.44 x 3.7 at 32.06 degrees (North through East) ! Clean map min=-0.0037019 max=1.604 Jy/beam ! Writing clean map to FITS file: 0059+581_S.fits ! Writing difmap environment to: 0059+581_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0059+581_S] device 0059+581_Suv.ps/vps,1,2 ! Attempting to open device: '0059+581_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0059+581_Sim.ps/vps ! Attempting to open device: '0059+581_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=3.7 mas, bpa=32.06 degrees ! Estimated noise=513.717 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.44 x 3.7 at 32.06 degrees (North through East) ! Clean map min=-0.0037019 max=1.604 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 0059+581_S.log closed on Thu Jul 12 22:10:31 2007