! Started logfile: J2225-0457_X_2003_06_18_pus_uvs.log on Wed Jan 17 18:27:45 2007 obs J2225-0457_X_2003_06_18_pus_uva.fits ! Reading UV FITS file: J2225-0457_X_2003_06_18_pus_uva.fits ! AN table 1: 343 integrations on 153 of 153 possible baselines. ! AN table 2: 47 integrations on 153 of 153 possible baselines. ! AN table 3: 154 integrations on 153 of 153 possible baselines. ! AN table 4: 78 integrations on 153 of 153 possible baselines. ! AN table 5: 254 integrations on 153 of 153 possible baselines. ! AN table 6: Unused. ! AN table 7: Unused. ! AN table 8: 11 integrations on 153 of 153 possible baselines. ! AN table 9: Unused. ! Apparent sampling: 0.137122 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2225-0457 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2231 lines of history. ! ! Reading 74436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 256 float field_cell field_cell = 0.2 float taper_size taper_size = 70. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5561 telescope corrections were flagged in sub-array 1. ! A total of 846 telescope corrections were flagged in sub-array 2. ! A total of 2264 telescope corrections were flagged in sub-array 3. ! A total of 1239 telescope corrections were flagged in sub-array 4. ! A total of 3414 telescope corrections were flagged in sub-array 5. ! A total of 198 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 5311 telescope corrections were flagged in sub-array 1. ! A total of 846 telescope corrections were flagged in sub-array 2. ! A total of 2188 telescope corrections were flagged in sub-array 3. ! A total of 1146 telescope corrections were flagged in sub-array 4. ! A total of 3367 telescope corrections were flagged in sub-array 5. ! A total of 198 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 5311 telescope corrections were flagged in sub-array 1. ! A total of 846 telescope corrections were flagged in sub-array 2. ! A total of 2188 telescope corrections were flagged in sub-array 3. ! A total of 1152 telescope corrections were flagged in sub-array 4. ! A total of 3361 telescope corrections were flagged in sub-array 5. ! A total of 198 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 5311 telescope corrections were flagged in sub-array 1. ! A total of 846 telescope corrections were flagged in sub-array 2. ! A total of 2188 telescope corrections were flagged in sub-array 3. ! A total of 1146 telescope corrections were flagged in sub-array 4. ! A total of 3366 telescope corrections were flagged in sub-array 5. ! A total of 198 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=2.099190Jy sigma=0.021069 ! Fit after self-cal, rms=1.692447Jy sigma=0.017411 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! Estimated beam: bmin=0.5464 mas, bmaj=0.988 mas, bpa=-4.447 degrees ! Estimated noise=927.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.55688 Jy ! Component: 100 - total flux cleaned = 2.14583 Jy ! Total flux subtracted in 100 components = 2.14583 Jy ! Clean residual min=-0.091616 max=0.300487 Jy/beam ! Clean residual mean=0.002611 rms=0.035847 Jy/beam ! Combined flux in latest and established models = 2.14583 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.14583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.223993Jy sigma=0.008937 ! Fit after self-cal, rms=1.221097Jy sigma=0.008913 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! Added new window around map position (0.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.359002 Jy ! Component: 100 - total flux cleaned = 0.590675 Jy ! Total flux subtracted in 100 components = 0.590675 Jy ! Clean residual min=-0.066162 max=0.173980 Jy/beam ! Clean residual mean=0.001483 rms=0.020749 Jy/beam ! Combined flux in latest and established models = 2.73651 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 2.73651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.096806Jy sigma=0.005319 ! Fit after self-cal, rms=1.092670Jy sigma=0.005250 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177433 Jy ! Component: 100 - total flux cleaned = 0.290852 Jy ! Total flux subtracted in 100 components = 0.290852 Jy ! Clean residual min=-0.044607 max=0.101743 Jy/beam ! Clean residual mean=0.000924 rms=0.014036 Jy/beam ! Combined flux in latest and established models = 3.02736 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 3.02736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062557Jy sigma=0.003826 ! Fit after self-cal, rms=1.060603Jy sigma=0.003780 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0938435 Jy ! Component: 100 - total flux cleaned = 0.152113 Jy ! Total flux subtracted in 100 components = 0.152113 Jy ! Clean residual min=-0.037272 max=0.064784 Jy/beam ! Clean residual mean=0.000631 rms=0.011211 Jy/beam ! Combined flux in latest and established models = 3.17947 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 3.17947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.053516Jy sigma=0.003252 ! Fit after self-cal, rms=1.052674Jy sigma=0.003230 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! Estimated beam: bmin=0.6802 mas, bmaj=1.289 mas, bpa=-8.682 degrees ! Estimated noise=444.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769061 Jy ! Component: 100 - total flux cleaned = 0.112843 Jy ! Component: 150 - total flux cleaned = 0.132199 Jy ! Component: 200 - total flux cleaned = 0.142408 Jy ! Total flux subtracted in 200 components = 0.142408 Jy ! Clean residual min=-0.031087 max=0.061034 Jy/beam ! Clean residual mean=0.005636 rms=0.011323 Jy/beam ! Combined flux in latest and established models = 3.32188 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 3.32188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.050923Jy sigma=0.002984 ! Fit after self-cal, rms=1.050167Jy sigma=0.002963 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec ! Added new window around map position (2.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562615 Jy ! Component: 100 - total flux cleaned = 0.0805318 Jy ! Component: 150 - total flux cleaned = 0.0861606 Jy ! Component: 200 - total flux cleaned = 0.0884904 Jy ! Total flux subtracted in 200 components = 0.0884904 Jy ! Clean residual min=-0.029950 max=0.031624 Jy/beam ! Clean residual mean=0.002977 rms=0.008704 Jy/beam ! Combined flux in latest and established models = 3.41037 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 3.41037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.047491Jy sigma=0.002850 ! Fit after self-cal, rms=1.047022Jy sigma=0.002833 ! Inverting map ! Your choice of large map pixels excluded 5.5% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.18 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 GG 1.00* HN 0.98 ! KK 1.00* KP 1.12 LA 1.11 MA 1.00* ! MK 1.00* NL 1.11 ON 1.01 OV 1.00* ! PT 1.08 SC 0.95 TC 1.09 TS 1.00* ! WF 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.98 GG 1.00* HN 0.97 ! KK 1.00* KP 1.05 LA 0.98 MA 1.00* ! MK 1.00* NL 0.88 ON 1.11 OV 1.03 ! PT 0.99 SC 0.97 TC 1.02 TS 1.00* ! WF 1.00 WZ 0.97 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.02 GG 1.00* HN 1.00* ! KK 1.00 KP 1.00* LA 0.99 MA 1.00* ! MK 1.02 NL 1.09 ON 1.00* OV 1.00* ! PT 0.97 SC 1.00* TC 1.15 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 171 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.97 GG 1.00* HN 0.97 ! KK 1.00 KP 1.00 LA 0.96 MA 1.00* ! MK 0.98 NL 1.06 ON 1.03 OV 0.99 ! PT 0.96 SC 0.95 TC 1.07 TS 1.17 ! WF 1.02 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 GG 1.00* HN 0.99 ! KK 1.00* KP 1.07 LA 1.11 MA 1.09 ! MK 1.00* NL 1.07 ON 1.05 OV 1.00* ! PT 1.12 SC 0.92 TC 1.15 TS 1.00* ! WF 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.98 GG 1.00* HN 0.98 ! KK 1.00* KP 1.00 LA 0.98 MA 1.21 ! MK 1.00* NL 0.84 ON 1.09 OV 1.02 ! PT 1.03 SC 0.94 TC 1.04 TS 1.00* ! WF 1.01 WZ 0.93 ! ! A total of 114 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00 GG 1.00* HN 1.00* ! KK 1.01 KP 1.00* LA 0.98 MA 1.00* ! MK 1.02 NL 1.05 ON 1.00* OV 1.00* ! PT 1.03 SC 1.00* TC 1.26 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 135 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.96 GG 1.00* HN 0.99 ! KK 1.00 KP 0.95 LA 0.96 MA 1.08 ! MK 0.99 NL 1.03 ON 1.12 OV 0.98 ! PT 1.01 SC 0.92 TC 1.13 TS 1.18 ! WF 1.05 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 GG 1.00* HN 0.98 ! KK 1.00* KP 1.12 LA 1.12 MA 1.15 ! MK 1.00* NL 1.05 ON 1.05 OV 1.00* ! PT 1.15 SC 0.93 TC 1.05 TS 1.00* ! WF 0.94 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.97 GG 1.00* HN 0.96 ! KK 1.00* KP 1.05 LA 0.99 MA 1.31 ! MK 1.00* NL 0.84 ON 1.13 OV 1.08 ! PT 1.06 SC 0.97 TC 1.01 TS 1.00* ! WF 0.95 WZ 0.94 ! ! A total of 108 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00 GG 1.00* HN 1.00* ! KK 1.07 KP 1.00* LA 0.99 MA 1.00* ! MK 1.02 NL 1.03 ON 1.00* OV 1.00* ! PT 1.05 SC 1.00* TC 0.96 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 141 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.95 GG 1.00* HN 0.98 ! KK 1.05 KP 0.99 LA 0.97 MA 1.11 ! MK 0.99 NL 1.00 ON 1.09 OV 1.02 ! PT 1.03 SC 0.94 TC 1.11 TS 1.21 ! WF 1.00 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 GG 1.00* HN 1.00 ! KK 1.00* KP 1.07 LA 1.10 MA 1.13 ! MK 1.00* NL 1.06 ON 1.07 OV 1.00* ! PT 1.16 SC 0.99 TC 1.01 TS 1.00* ! WF 0.93 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.95 GG 1.00* HN 1.01 ! KK 1.00* KP 1.01 LA 0.98 MA 1.30 ! MK 1.00* NL 0.86 ON 1.25 OV 1.06 ! PT 1.07 SC 1.02 TC 0.95 TS 1.00* ! WF 0.95 WZ 0.95 ! ! A total of 114 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.98 GG 1.00* HN 1.00* ! KK 1.05 KP 1.00* LA 0.97 MA 1.00* ! MK 1.03 NL 1.03 ON 1.00* OV 1.00* ! PT 1.06 SC 1.00* TC 1.08 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 135 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.94 GG 1.00* HN 1.00 ! KK 1.01 KP 0.95 LA 0.95 MA 1.12 ! MK 1.01 NL 1.01 ON 0.91 OV 1.01 ! PT 1.04 SC 0.99 TC 1.05 TS 1.21 ! WF 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=1.047022Jy sigma=0.002833 ! Fit after self-cal, rms=1.062018Jy sigma=0.002135 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6931 mas, bmaj=1.342 mas, bpa=-8.974 degrees ! Estimated noise=448.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391975 Jy ! Component: 100 - total flux cleaned = 0.00627373 Jy ! Component: 150 - total flux cleaned = 0.00872943 Jy ! Component: 200 - total flux cleaned = 0.0112739 Jy ! Total flux subtracted in 200 components = 0.0112739 Jy ! Clean residual min=-0.015431 max=0.023005 Jy/beam ! Clean residual mean=0.001648 rms=0.004881 Jy/beam ! Combined flux in latest and established models = 3.42165 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 3.42165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.060574Jy sigma=0.002091 ! Fit after self-cal, rms=1.061375Jy sigma=0.002084 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.061375Jy sigma=0.002084 ! Fit after self-cal, rms=0.938823Jy sigma=0.002019 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6948 mas, bmaj=1.348 mas, bpa=-8.995 degrees ! Estimated noise=448.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614355 Jy ! Component: 100 - total flux cleaned = 0.00400408 Jy ! Component: 150 - total flux cleaned = 0.00669531 Jy ! Component: 200 - total flux cleaned = 0.00819565 Jy ! Total flux subtracted in 200 components = 0.00819565 Jy ! Clean residual min=-0.011483 max=0.018762 Jy/beam ! Clean residual mean=0.001483 rms=0.004147 Jy/beam ! Combined flux in latest and established models = 3.42984 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 3.42984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.938039Jy sigma=0.001998 ! Fit after self-cal, rms=0.937962Jy sigma=0.001993 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129755 Jy ! Component: 100 - total flux cleaned = 0.0180645 Jy ! Component: 150 - total flux cleaned = 0.0198573 Jy ! Component: 200 - total flux cleaned = 0.0207904 Jy ! Total flux subtracted in 200 components = 0.0207904 Jy ! Clean residual min=-0.010979 max=0.015372 Jy/beam ! Clean residual mean=0.000868 rms=0.003592 Jy/beam ! Combined flux in latest and established models = 3.45063 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 3.45063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.937451Jy sigma=0.001975 ! Fit after self-cal, rms=0.937274Jy sigma=0.001972 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Added new window around map position (6.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113867 Jy ! Component: 100 - total flux cleaned = 0.0158767 Jy ! Component: 150 - total flux cleaned = 0.0176805 Jy ! Component: 200 - total flux cleaned = 0.0195254 Jy ! Total flux subtracted in 200 components = 0.0195254 Jy ! Clean residual min=-0.010424 max=0.012752 Jy/beam ! Clean residual mean=0.000358 rms=0.003089 Jy/beam ! Combined flux in latest and established models = 3.47016 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 3.47016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.936957Jy sigma=0.001959 ! Fit after self-cal, rms=0.936797Jy sigma=0.001958 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.936797Jy sigma=0.001958 ! Fit after self-cal, rms=0.992848Jy sigma=0.001919 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6968 mas, bmaj=1.357 mas, bpa=-9.043 degrees ! Estimated noise=449.282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020636 Jy ! Component: 100 - total flux cleaned = 0.00622872 Jy ! Component: 150 - total flux cleaned = 0.00899468 Jy ! Component: 200 - total flux cleaned = 0.0106411 Jy ! Total flux subtracted in 200 components = 0.0106411 Jy ! Clean residual min=-0.008527 max=0.013574 Jy/beam ! Clean residual mean=0.000495 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 3.4808 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 3.4808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.992590Jy sigma=0.001910 ! Fit after self-cal, rms=0.992880Jy sigma=0.001908 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783174 Jy ! Component: 100 - total flux cleaned = 0.0030626 Jy ! Component: 150 - total flux cleaned = 0.00476299 Jy ! Component: 200 - total flux cleaned = 0.00533674 Jy ! Total flux subtracted in 200 components = 0.00533674 Jy ! Clean residual min=-0.008613 max=0.011569 Jy/beam ! Clean residual mean=0.000329 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 3.48613 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 124 components and 3.48613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.992740Jy sigma=0.001904 ! Fit after self-cal, rms=0.992651Jy sigma=0.001903 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.992651Jy sigma=0.001903 ! Fit after self-cal, rms=0.996254Jy sigma=0.001901 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=2.419 mas, bmaj=4.227 mas, bpa=-9.764 degrees ! Estimated noise=516.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855537 Jy ! Component: 100 - total flux cleaned = 0.00996495 Jy ! Component: 150 - total flux cleaned = 0.0104135 Jy ! Component: 200 - total flux cleaned = 0.0107869 Jy ! Total flux subtracted in 200 components = 0.0107869 Jy ! Clean residual min=-0.009163 max=0.010542 Jy/beam ! Clean residual mean=0.000437 rms=0.003255 Jy/beam ! Combined flux in latest and established models = 3.49692 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 134 components and 3.49692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.996269Jy sigma=0.001898 ! Fit after self-cal, rms=0.996198Jy sigma=0.001897 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174124 Jy ! Component: 100 - total flux cleaned = 0.00276386 Jy ! Component: 150 - total flux cleaned = 0.00292209 Jy ! Component: 200 - total flux cleaned = 0.00307295 Jy ! Total flux subtracted in 200 components = 0.00307295 Jy ! Clean residual min=-0.009124 max=0.010691 Jy/beam ! Clean residual mean=0.000224 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 3.49999 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 135 components and 3.49999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.996191Jy sigma=0.001896 ! Fit after self-cal, rms=0.996128Jy sigma=0.001895 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.698 mas, bmaj=1.361 mas, bpa=-9.07 degrees ! Estimated noise=449.676 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.698 x 1.361 at -9.07 degrees (North through East) ! Clean map min=-0.0077281 max=2.1138 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.996128Jy sigma=0.001895 ! Fit after self-cal, rms=8.352373Jy sigma=0.001642 ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6979 mas, bmaj=1.358 mas, bpa=-9.059 degrees ! Estimated noise=449.121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182669 Jy ! Component: 100 - total flux cleaned = -0.000482401 Jy ! Component: 150 - total flux cleaned = -0.00012045 Jy ! Component: 200 - total flux cleaned = 3.63462e-05 Jy ! Total flux subtracted in 200 components = 3.63462e-05 Jy ! Clean residual min=-0.008330 max=0.008911 Jy/beam ! Clean residual mean=0.000289 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 3.50003 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 143 components and 3.50003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.352376Jy sigma=0.001638 ! Fit after self-cal, rms=8.353044Jy sigma=0.001637 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43289e-05 Jy ! Component: 100 - total flux cleaned = 0.00114371 Jy ! Component: 150 - total flux cleaned = 0.00143679 Jy ! Component: 200 - total flux cleaned = 0.00130157 Jy ! Total flux subtracted in 200 components = 0.00130157 Jy ! Clean residual min=-0.008240 max=0.008172 Jy/beam ! Clean residual mean=0.000246 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 3.50133 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 148 components and 3.50133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.353016Jy sigma=0.001635 ! Fit after self-cal, rms=8.353185Jy sigma=0.001634 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.353185Jy sigma=0.001634 ! Fit after self-cal, rms=8.696348Jy sigma=0.001633 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.5588 mas, bmaj=1.025 mas, bpa=-5.421 degrees ! Estimated noise=946.066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57208 Jy ! Component: 100 - total flux cleaned = 2.20855 Jy ! Component: 150 - total flux cleaned = 2.57907 Jy ! Component: 200 - total flux cleaned = 2.812 Jy ! Total flux subtracted in 200 components = 2.812 Jy ! Clean residual min=-0.035775 max=0.125131 Jy/beam ! Clean residual mean=0.001311 rms=0.015599 Jy/beam ! Combined flux in latest and established models = 2.812 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.812 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6988 mas, bmaj=1.36 mas, bpa=-9.08 degrees ! Estimated noise=449.384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249377 Jy ! Component: 100 - total flux cleaned = 0.386054 Jy ! Component: 150 - total flux cleaned = 0.46969 Jy ! Component: 200 - total flux cleaned = 0.524443 Jy ! Total flux subtracted in 200 components = 0.524443 Jy ! Clean residual min=-0.010610 max=0.030621 Jy/beam ! Clean residual mean=0.005264 rms=0.007768 Jy/beam ! Combined flux in latest and established models = 3.33644 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 3.33644 Jy ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=2.418 mas, bmaj=4.226 mas, bpa=-9.768 degrees ! Estimated noise=516.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0682301 Jy ! Component: 100 - total flux cleaned = 0.10553 Jy ! Component: 150 - total flux cleaned = 0.127687 Jy ! Component: 200 - total flux cleaned = 0.14141 Jy ! Total flux subtracted in 200 components = 0.14141 Jy ! Clean residual min=-0.010449 max=0.008456 Jy/beam ! Clean residual mean=0.002305 rms=0.003269 Jy/beam ! Combined flux in latest and established models = 3.47785 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879607 Jy ! Component: 100 - total flux cleaned = 0.0145364 Jy ! Component: 150 - total flux cleaned = 0.018324 Jy ! Component: 200 - total flux cleaned = 0.020854 Jy ! Total flux subtracted in 200 components = 0.0208539 Jy ! Clean residual min=-0.010330 max=0.008946 Jy/beam ! Clean residual mean=0.000885 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 3.4987 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 119 components and 3.4987 Jy ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! Estimated beam: bmin=0.6988 mas, bmaj=1.36 mas, bpa=-9.08 degrees ! Estimated noise=449.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197229 Jy ! Component: 100 - total flux cleaned = -0.00177577 Jy ! Component: 150 - total flux cleaned = -0.00161404 Jy ! Component: 200 - total flux cleaned = -0.0016098 Jy ! Total flux subtracted in 200 components = -0.0016098 Jy ! Clean residual min=-0.007663 max=0.009080 Jy/beam ! Clean residual mean=0.000428 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 3.49709 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 3.49709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.696982Jy sigma=0.001626 ! Fit after self-cal, rms=8.697270Jy sigma=0.001619 wmodel J2225-0457_X_2003_06_18_pus_map.mod ! Writing 129 model components to file: J2225-0457_X_2003_06_18_pus_map.mod wobs J2225-0457_X_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J2225-0457_X_2003_06_18_pus_uvs.fits wwins J2225-0457_X_2003_06_18_pus_map.win ! wwins: Wrote 5 windows to J2225-0457_X_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105057 Jy ! Component: 100 - total flux cleaned = -0.000936273 Jy ! Component: 150 - total flux cleaned = -7.81551e-05 Jy ! Component: 200 - total flux cleaned = 0.000940193 Jy ! Component: 250 - total flux cleaned = 0.00162424 Jy ! Component: 300 - total flux cleaned = 0.00237841 Jy ! Component: 350 - total flux cleaned = 0.00319796 Jy ! Component: 400 - total flux cleaned = 0.00390545 Jy ! Component: 450 - total flux cleaned = 0.00468225 Jy ! Component: 500 - total flux cleaned = 0.00535471 Jy ! Component: 550 - total flux cleaned = 0.00601186 Jy ! Component: 600 - total flux cleaned = 0.00665354 Jy ! Component: 650 - total flux cleaned = 0.00728017 Jy ! Component: 700 - total flux cleaned = 0.00781656 Jy ! Component: 750 - total flux cleaned = 0.00826725 Jy ! Component: 800 - total flux cleaned = 0.00871008 Jy ! Component: 850 - total flux cleaned = 0.00914407 Jy ! Component: 900 - total flux cleaned = 0.00949888 Jy ! Component: 950 - total flux cleaned = 0.0097791 Jy ! Component: 1000 - total flux cleaned = 0.0103281 Jy ! Total flux subtracted in 1024 components = 0.0103956 Jy ! Clean residual min=-0.003835 max=0.004340 Jy/beam ! Clean residual mean=0.000143 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 3.50749 Jy keep ! Adding 56 model components to the UV plane model. ! The established model now contains 183 components and 3.50749 Jy wmap "J2225-0457_X_2003_06_18_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6988 x 1.36 at -9.08 degrees (North through East) ! Clean map min=-0.0069606 max=2.1176 Jy/beam ! Writing clean map to FITS file: J2225-0457_X_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.11758 invert ! Inverting map ! Your choice of large map pixels excluded 4.8% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! The y-axis pixel size should ideally be below 0.1814 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00123433 device "J2225-0457_X_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J2225-0457_X_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.17487 0.17487 0.349739 0.699478 1.39896 2.79791 5.59582 11.1916 22.3833 44.7666 89.5332 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6988 x 1.36 at -9.08 degrees (North through East) ! Clean map min=-0.0069606 max=2.1176 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2225-0457_X_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J2225-0457_X_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2225-0457_X_2003_06_18_pus_uvs.log closed on Wed Jan 17 18:31:04 2007