! Started logfile: J1613+3412_X_2003_06_18_pus_uvs.log on Thu Jan 18 14:04:23 2007 obs J1613+3412_X_2003_06_18_pus_uva.fits ! Reading UV FITS file: J1613+3412_X_2003_06_18_pus_uva.fits ! AN table 1: 41 integrations on 153 of 153 possible baselines. ! AN table 2: 90 integrations on 153 of 153 possible baselines. ! AN table 3: 101 integrations on 153 of 153 possible baselines. ! AN table 4: 34 integrations on 153 of 153 possible baselines. ! AN table 5: 41 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.138617 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2235 lines of history. ! ! Reading 26044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 474 telescope corrections were flagged in sub-array 1. ! A total of 992 telescope corrections were flagged in sub-array 2. ! A total of 1237 telescope corrections were flagged in sub-array 3. ! A total of 511 telescope corrections were flagged in sub-array 4. ! A total of 515 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 474 telescope corrections were flagged in sub-array 1. ! A total of 992 telescope corrections were flagged in sub-array 2. ! A total of 1228 telescope corrections were flagged in sub-array 3. ! A total of 486 telescope corrections were flagged in sub-array 4. ! A total of 515 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 474 telescope corrections were flagged in sub-array 1. ! A total of 992 telescope corrections were flagged in sub-array 2. ! A total of 1228 telescope corrections were flagged in sub-array 3. ! A total of 486 telescope corrections were flagged in sub-array 4. ! A total of 515 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 474 telescope corrections were flagged in sub-array 1. ! A total of 992 telescope corrections were flagged in sub-array 2. ! A total of 1228 telescope corrections were flagged in sub-array 3. ! A total of 486 telescope corrections were flagged in sub-array 4. ! A total of 515 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=2.257969Jy sigma=0.030232 ! Fit after self-cal, rms=1.845934Jy sigma=0.025047 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.6288 mas, bmaj=1.047 mas, bpa=-12.29 degrees ! Estimated noise=776.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93632 Jy ! Component: 100 - total flux cleaned = 2.44421 Jy ! Total flux subtracted in 100 components = 2.44421 Jy ! Clean residual min=-0.082508 max=0.221857 Jy/beam ! Clean residual mean=0.003699 rms=0.028398 Jy/beam ! Combined flux in latest and established models = 2.44421 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.44421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.797022Jy sigma=0.010638 ! Fit after self-cal, rms=0.796620Jy sigma=0.010631 ! Inverting map ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224389 Jy ! Component: 100 - total flux cleaned = 0.342514 Jy ! Total flux subtracted in 100 components = 0.342514 Jy ! Clean residual min=-0.076281 max=0.227562 Jy/beam ! Clean residual mean=0.002849 rms=0.024425 Jy/beam ! Combined flux in latest and established models = 2.78672 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 2.78672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.672661Jy sigma=0.008727 ! Fit after self-cal, rms=0.671616Jy sigma=0.008718 ! Inverting map ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Added new window around map position (0.4, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215341 Jy ! Component: 100 - total flux cleaned = 0.331619 Jy ! Total flux subtracted in 100 components = 0.331619 Jy ! Clean residual min=-0.068101 max=0.099342 Jy/beam ! Clean residual mean=0.002133 rms=0.019336 Jy/beam ! Combined flux in latest and established models = 3.11834 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 3.11834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544823Jy sigma=0.006754 ! Fit after self-cal, rms=0.529970Jy sigma=0.006591 ! Inverting map ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.9472 mas, bmaj=1.363 mas, bpa=-20.08 degrees ! Estimated noise=375.787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237079 Jy ! Component: 100 - total flux cleaned = 0.381577 Jy ! Component: 150 - total flux cleaned = 0.473959 Jy ! Component: 200 - total flux cleaned = 0.534139 Jy ! Total flux subtracted in 200 components = 0.534139 Jy ! Clean residual min=-0.050013 max=0.097269 Jy/beam ! Clean residual mean=0.007801 rms=0.020971 Jy/beam ! Combined flux in latest and established models = 3.65248 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 3.65248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425232Jy sigma=0.004757 ! Fit after self-cal, rms=0.411295Jy sigma=0.004584 ! Inverting map ! Your choice of large map pixels excluded 2.61% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 GG 1.00* HN 1.02 ! KK 1.00* KP 0.94 LA 1.00* MA 1.00* ! MK 0.97 NL 1.12 ON 1.00* OV 0.91 ! PT 0.92 SC 1.11 TC 1.00* TS 0.99 ! WF 0.99 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 GG 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 0.94 MA 1.00* ! MK 1.00 NL 1.07 ON 1.00* OV 1.03 ! PT 0.94 SC 1.05 TC 1.21 TS 1.00* ! WF 1.03 WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00 GG 1.00* HN 1.02 ! KK 1.00* KP 0.96 LA 0.93 MA 1.00* ! MK 1.00* NL 0.99 ON 1.10 OV 1.10 ! PT 0.85 SC 0.94 TC 1.08 TS 1.00* ! WF 1.17 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.34 ON 1.07 OV 1.00* ! PT 1.00* SC 1.12 TC 1.00* TS 1.00* ! WF 1.13 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.09 FD 1.04 GG 1.00* HN 1.00* ! KK 0.97 KP 1.06 LA 1.07 MA 1.00* ! MK 0.99 NL 1.23 ON 1.00* OV 0.98 ! PT 1.03 SC 1.00* TC 1.00* TS 1.02 ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 GG 1.00* HN 1.03 ! KK 1.00* KP 0.89 LA 1.00* MA 1.00* ! MK 0.98 NL 1.08 ON 1.00* OV 0.90 ! PT 0.95 SC 1.07 TC 1.00* TS 0.98 ! WF 1.02 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 GG 1.00* HN 1.00 ! KK 1.00* KP 0.95 LA 0.95 MA 1.00* ! MK 1.01 NL 1.04 ON 1.00* OV 1.02 ! PT 0.98 SC 1.01 TC 1.30 TS 1.00* ! WF 1.05 WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 GG 1.00* HN 1.03 ! KK 1.00* KP 0.91 LA 0.93 MA 1.09 ! MK 1.00* NL 0.95 ON 1.09 OV 1.10 ! PT 0.89 SC 0.91 TC 1.11 TS 1.00* ! WF 1.21 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HN 1.03 ! KK 1.00* KP 1.00* LA 1.00* MA 0.97 ! MK 1.00* NL 1.28 ON 1.05 OV 1.00* ! PT 1.00* SC 1.10 TC 1.00* TS 1.00* ! WF 1.16 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.10 FD 1.02 GG 1.00* HN 1.00* ! KK 0.96 KP 1.01 LA 1.09 MA 1.00* ! MK 1.00 NL 1.18 ON 1.00* OV 0.96 ! PT 1.08 SC 1.00* TC 1.00* TS 1.01 ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 GG 1.00* HN 1.01 ! KK 1.00* KP 0.93 LA 1.00* MA 1.00* ! MK 0.99 NL 1.06 ON 1.00* OV 0.94 ! PT 0.99 SC 1.09 TC 1.00* TS 0.96 ! WF 0.95 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 GG 1.00* HN 1.00 ! KK 1.00* KP 0.99 LA 0.95 MA 1.00* ! MK 1.00 NL 1.01 ON 1.00* OV 1.05 ! PT 1.00 SC 1.03 TC 1.24 TS 1.00* ! WF 1.00 WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 GG 1.00* HN 1.01 ! KK 1.00* KP 0.95 LA 0.94 MA 1.08 ! MK 1.00* NL 0.94 ON 1.06 OV 1.13 ! PT 0.91 SC 0.93 TC 1.05 TS 1.00* ! WF 1.12 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HN 1.01 ! KK 1.00* KP 1.00* LA 1.00* MA 0.94 ! MK 1.00* NL 1.24 ON 1.04 OV 1.00* ! PT 1.00* SC 1.11 TC 1.00* TS 1.00* ! WF 1.08 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.13 FD 1.02 GG 1.00* HN 1.00* ! KK 1.00 KP 1.05 LA 1.10 MA 1.00* ! MK 1.00 NL 1.14 ON 1.00* OV 1.01 ! PT 1.11 SC 1.00* TC 1.00* TS 1.00 ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 GG 1.00* HN 1.04 ! KK 1.00* KP 0.89 LA 1.00* MA 1.00* ! MK 1.01 NL 1.06 ON 1.00* OV 0.93 ! PT 0.99 SC 1.15 TC 1.00* TS 0.97 ! WF 0.94 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 GG 1.00* HN 1.02 ! KK 1.00* KP 0.95 LA 0.93 MA 1.00* ! MK 1.04 NL 1.02 ON 1.00* OV 1.04 ! PT 1.01 SC 1.08 TC 1.24 TS 1.00* ! WF 1.00 WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 GG 1.00* HN 1.04 ! KK 1.00* KP 0.92 LA 0.92 MA 1.08 ! MK 1.00* NL 0.95 ON 1.12 OV 1.11 ! PT 0.92 SC 0.97 TC 1.02 TS 1.00* ! WF 1.10 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HN 1.05 ! KK 1.00* KP 1.00* LA 1.00* MA 0.96 ! MK 1.00* NL 1.26 ON 1.02 OV 1.00* ! PT 1.00* SC 1.16 TC 1.00* TS 1.00* ! WF 1.05 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.10 FD 1.00 GG 1.00* HN 1.00* ! KK 0.98 KP 1.01 LA 1.07 MA 1.00* ! MK 1.03 NL 1.15 ON 1.00* OV 1.00 ! PT 1.11 SC 1.00* TC 1.00* TS 1.00 ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.411295Jy sigma=0.004584 ! Fit after self-cal, rms=0.348883Jy sigma=0.003235 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.9539 mas, bmaj=1.386 mas, bpa=-19.79 degrees ! Estimated noise=374.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0872166 Jy ! Component: 100 - total flux cleaned = 0.133228 Jy ! Component: 150 - total flux cleaned = 0.151053 Jy ! Component: 200 - total flux cleaned = 0.154428 Jy ! Total flux subtracted in 200 components = 0.154428 Jy ! Clean residual min=-0.027050 max=0.051727 Jy/beam ! Clean residual mean=0.004308 rms=0.008885 Jy/beam ! Combined flux in latest and established models = 3.80691 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 3.80691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326221Jy sigma=0.002871 ! Fit after self-cal, rms=0.322883Jy sigma=0.002817 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Added new window around map position (-1.2, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479419 Jy ! Component: 100 - total flux cleaned = 0.0612296 Jy ! Component: 150 - total flux cleaned = 0.0638687 Jy ! Component: 200 - total flux cleaned = 0.0638628 Jy ! Total flux subtracted in 200 components = 0.0638628 Jy ! Clean residual min=-0.031063 max=0.026368 Jy/beam ! Clean residual mean=0.003169 rms=0.007876 Jy/beam ! Combined flux in latest and established models = 3.87077 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 3.87077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314072Jy sigma=0.002672 ! Fit after self-cal, rms=0.312454Jy sigma=0.002654 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312454Jy sigma=0.002654 ! Fit after self-cal, rms=0.299943Jy sigma=0.002434 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.952 mas, bmaj=1.387 mas, bpa=-19.74 degrees ! Estimated noise=374.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041026 Jy ! Component: 100 - total flux cleaned = 0.0669509 Jy ! Component: 150 - total flux cleaned = 0.0739876 Jy ! Component: 200 - total flux cleaned = 0.0759901 Jy ! Total flux subtracted in 200 components = 0.0759901 Jy ! Clean residual min=-0.015878 max=0.020727 Jy/beam ! Clean residual mean=0.002503 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 3.94676 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 98 components and 3.94676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293285Jy sigma=0.002308 ! Fit after self-cal, rms=0.291999Jy sigma=0.002290 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149677 Jy ! Component: 100 - total flux cleaned = 0.0168467 Jy ! Component: 150 - total flux cleaned = 0.0185153 Jy ! Component: 200 - total flux cleaned = 0.019022 Jy ! Total flux subtracted in 200 components = 0.019022 Jy ! Clean residual min=-0.017914 max=0.018293 Jy/beam ! Clean residual mean=0.002182 rms=0.004426 Jy/beam ! Combined flux in latest and established models = 3.96578 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 107 components and 3.96578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289374Jy sigma=0.002242 ! Fit after self-cal, rms=0.288962Jy sigma=0.002238 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288962Jy sigma=0.002238 ! Fit after self-cal, rms=0.286608Jy sigma=0.002199 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.9514 mas, bmaj=1.387 mas, bpa=-19.79 degrees ! Estimated noise=375.087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236387 Jy ! Component: 100 - total flux cleaned = 0.0369014 Jy ! Component: 150 - total flux cleaned = 0.0398703 Jy ! Component: 200 - total flux cleaned = 0.0407527 Jy ! Total flux subtracted in 200 components = 0.0407527 Jy ! Clean residual min=-0.013043 max=0.016463 Jy/beam ! Clean residual mean=0.001657 rms=0.003446 Jy/beam ! Combined flux in latest and established models = 4.00653 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 4.00653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284009Jy sigma=0.002150 ! Fit after self-cal, rms=0.283501Jy sigma=0.002144 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491075 Jy ! Component: 100 - total flux cleaned = 0.005962 Jy ! Component: 150 - total flux cleaned = 0.00781565 Jy ! Component: 200 - total flux cleaned = 0.00865498 Jy ! Total flux subtracted in 200 components = 0.00865498 Jy ! Clean residual min=-0.013382 max=0.012997 Jy/beam ! Clean residual mean=0.001509 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 4.01519 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 4.01519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280926Jy sigma=0.002109 ! Fit after self-cal, rms=0.280365Jy sigma=0.002104 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280365Jy sigma=0.002104 ! Fit after self-cal, rms=0.278954Jy sigma=0.002091 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=2.533 mas, bmaj=2.828 mas, bpa=-68.04 degrees ! Estimated noise=442.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198721 Jy ! Component: 100 - total flux cleaned = 0.0238148 Jy ! Component: 150 - total flux cleaned = 0.026533 Jy ! Component: 200 - total flux cleaned = 0.0274605 Jy ! Total flux subtracted in 200 components = 0.0274605 Jy ! Clean residual min=-0.004761 max=0.010854 Jy/beam ! Clean residual mean=0.002244 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 4.04265 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 140 components and 4.04265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277808Jy sigma=0.002073 ! Fit after self-cal, rms=0.277369Jy sigma=0.002068 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248889 Jy ! Component: 100 - total flux cleaned = 0.00480628 Jy ! Component: 150 - total flux cleaned = 0.00591528 Jy ! Component: 200 - total flux cleaned = 0.0062921 Jy ! Total flux subtracted in 200 components = 0.0062921 Jy ! Clean residual min=-0.005811 max=0.009866 Jy/beam ! Clean residual mean=0.002025 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 4.04894 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 4.04894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276838Jy sigma=0.002061 ! Fit after self-cal, rms=0.276585Jy sigma=0.002058 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.9513 mas, bmaj=1.386 mas, bpa=-19.79 degrees ! Estimated noise=375.102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9513 x 1.386 at -19.79 degrees (North through East) ! Clean map min=-0.0093648 max=2.6224 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276585Jy sigma=0.002058 ! Fit after self-cal, rms=0.269069Jy sigma=0.001812 ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.952 mas, bmaj=1.384 mas, bpa=-19.8 degrees ! Estimated noise=374.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987314 Jy ! Component: 100 - total flux cleaned = 0.0106307 Jy ! Component: 150 - total flux cleaned = 0.0102675 Jy ! Component: 200 - total flux cleaned = 0.0102718 Jy ! Total flux subtracted in 200 components = 0.0102718 Jy ! Clean residual min=-0.007352 max=0.010216 Jy/beam ! Clean residual mean=0.000689 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 4.05921 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 4.05922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267457Jy sigma=0.001790 ! Fit after self-cal, rms=0.267203Jy sigma=0.001788 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Added new window around map position (8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395558 Jy ! Component: 100 - total flux cleaned = 0.00523984 Jy ! Component: 150 - total flux cleaned = 0.00582942 Jy ! Component: 200 - total flux cleaned = 0.00610381 Jy ! Total flux subtracted in 200 components = 0.00610381 Jy ! Clean residual min=-0.007385 max=0.007837 Jy/beam ! Clean residual mean=0.000585 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 4.06532 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 4.06532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266213Jy sigma=0.001773 ! Fit after self-cal, rms=0.266063Jy sigma=0.001772 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266063Jy sigma=0.001772 ! Fit after self-cal, rms=0.265295Jy sigma=0.001769 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.6299 mas, bmaj=1.064 mas, bpa=-11.77 degrees ! Estimated noise=789.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95569 Jy ! Component: 100 - total flux cleaned = 2.47528 Jy ! Component: 150 - total flux cleaned = 2.74653 Jy ! Component: 200 - total flux cleaned = 2.93199 Jy ! Total flux subtracted in 200 components = 2.93199 Jy ! Clean residual min=-0.033841 max=0.105166 Jy/beam ! Clean residual mean=0.002514 rms=0.015933 Jy/beam ! Combined flux in latest and established models = 2.93199 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 2.93199 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.952 mas, bmaj=1.382 mas, bpa=-19.78 degrees ! Estimated noise=374.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333341 Jy ! Component: 100 - total flux cleaned = 0.545065 Jy ! Component: 150 - total flux cleaned = 0.694429 Jy ! Component: 200 - total flux cleaned = 0.802565 Jy ! Total flux subtracted in 200 components = 0.802565 Jy ! Clean residual min=-0.014323 max=0.062114 Jy/beam ! Clean residual mean=0.006779 rms=0.013734 Jy/beam ! Combined flux in latest and established models = 3.73455 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 104 components and 3.73455 Jy ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Added new window around map position (0.6, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796917 Jy ! Component: 100 - total flux cleaned = 0.138993 Jy ! Component: 150 - total flux cleaned = 0.183699 Jy ! Component: 200 - total flux cleaned = 0.217805 Jy ! Total flux subtracted in 200 components = 0.217805 Jy ! Clean residual min=-0.007574 max=0.019879 Jy/beam ! Clean residual mean=0.002778 rms=0.004794 Jy/beam ! Combined flux in latest and established models = 3.95236 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 153 components and 3.95236 Jy ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=2.53 mas, bmaj=2.824 mas, bpa=-68.39 degrees ! Estimated noise=442.762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423651 Jy ! Component: 100 - total flux cleaned = 0.0681037 Jy ! Component: 150 - total flux cleaned = 0.0851301 Jy ! Component: 200 - total flux cleaned = 0.0969705 Jy ! Total flux subtracted in 200 components = 0.0969705 Jy ! Clean residual min=-0.004021 max=0.008039 Jy/beam ! Clean residual mean=0.002071 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 4.04933 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086452 Jy ! Component: 100 - total flux cleaned = 0.0149958 Jy ! Component: 150 - total flux cleaned = 0.0197231 Jy ! Component: 200 - total flux cleaned = 0.022075 Jy ! Total flux subtracted in 200 components = 0.022075 Jy ! Clean residual min=-0.003513 max=0.006612 Jy/beam ! Clean residual mean=0.001238 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 4.0714 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 237 components and 4.0714 Jy ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! Estimated beam: bmin=0.952 mas, bmaj=1.382 mas, bpa=-19.78 degrees ! Estimated noise=374.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773206 Jy ! Component: 100 - total flux cleaned = 0.001449 Jy ! Component: 150 - total flux cleaned = 0.00228296 Jy ! Component: 200 - total flux cleaned = 0.00286221 Jy ! Total flux subtracted in 200 components = 0.00286221 Jy ! Clean residual min=-0.005474 max=0.008182 Jy/beam ! Clean residual mean=0.000556 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 4.07426 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 256 components and 4.07426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260048Jy sigma=0.001736 ! Fit after self-cal, rms=0.258502Jy sigma=0.001715 wmodel J1613+3412_X_2003_06_18_pus_map.mod ! Writing 256 model components to file: J1613+3412_X_2003_06_18_pus_map.mod wobs J1613+3412_X_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J1613+3412_X_2003_06_18_pus_uvs.fits wwins J1613+3412_X_2003_06_18_pus_map.win ! wwins: Wrote 7 windows to J1613+3412_X_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776211 Jy ! Component: 100 - total flux cleaned = 0.000336626 Jy ! Component: 150 - total flux cleaned = 0.00132667 Jy ! Component: 200 - total flux cleaned = 0.00254165 Jy ! Component: 250 - total flux cleaned = 0.00398655 Jy ! Component: 300 - total flux cleaned = 0.00518435 Jy ! Component: 350 - total flux cleaned = 0.00633268 Jy ! Component: 400 - total flux cleaned = 0.0072699 Jy ! Component: 450 - total flux cleaned = 0.00842836 Jy ! Component: 500 - total flux cleaned = 0.00947407 Jy ! Component: 550 - total flux cleaned = 0.0104144 Jy ! Component: 600 - total flux cleaned = 0.0110279 Jy ! Component: 650 - total flux cleaned = 0.0117051 Jy ! Component: 700 - total flux cleaned = 0.0122217 Jy ! Component: 750 - total flux cleaned = 0.0126575 Jy ! Component: 800 - total flux cleaned = 0.0132298 Jy ! Component: 850 - total flux cleaned = 0.0136521 Jy ! Component: 900 - total flux cleaned = 0.0142069 Jy ! Component: 950 - total flux cleaned = 0.0146848 Jy ! Component: 1000 - total flux cleaned = 0.0150896 Jy ! Total flux subtracted in 1024 components = 0.0154233 Jy ! Clean residual min=-0.003327 max=0.003326 Jy/beam ! Clean residual mean=0.000289 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 4.08969 Jy keep ! Adding 62 model components to the UV plane model. ! The established model now contains 315 components and 4.08969 Jy wmap "J1613+3412_X_2003_06_18_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.952 x 1.382 at -19.78 degrees (North through East) ! Clean map min=-0.0044294 max=2.6164 Jy/beam ! Writing clean map to FITS file: J1613+3412_X_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.6164 invert ! Inverting map ! Your choice of large map pixels excluded 2.55% of the data. ! The x-axis pixel size should ideally be below 0.156 milli-arcsec ! The y-axis pixel size should ideally be below 0.187 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124789 device "J1613+3412_X_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_X_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143085 0.143085 0.28617 0.572341 1.14468 2.28936 4.57873 9.15745 18.3149 36.6298 73.2596 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.616 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.952 x 1.382 at -19.78 degrees (North through East) ! Clean map min=-0.0044294 max=2.6164 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_X_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J1613+3412_X_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1613+3412_X_2003_06_18_pus_uvs.log closed on Thu Jan 18 14:05:46 2007