! Started logfile: J1550+0527_S_2003_06_18_pus_uvs.log on Thu Jan 25 00:21:45 2007 obs J1550+0527_S_2003_06_18_pus_uva.fits ! Reading UV FITS file: J1550+0527_S_2003_06_18_pus_uva.fits ! AN table 1: 36 integrations on 153 of 153 possible baselines. ! AN table 2: 38 integrations on 153 of 153 possible baselines. ! AN table 3: 83 integrations on 153 of 153 possible baselines. ! AN table 4: 210 integrations on 153 of 153 possible baselines. ! AN table 5: 87 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0670007 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1550+0527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2429 lines of history. ! ! Reading 18616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 648 telescope corrections were flagged in sub-array 1. ! A total of 551 telescope corrections were flagged in sub-array 2. ! A total of 1257 telescope corrections were flagged in sub-array 3. ! A total of 2929 telescope corrections were flagged in sub-array 4. ! A total of 1226 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 648 telescope corrections were flagged in sub-array 1. ! A total of 551 telescope corrections were flagged in sub-array 2. ! A total of 1257 telescope corrections were flagged in sub-array 3. ! A total of 2929 telescope corrections were flagged in sub-array 4. ! A total of 1226 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 648 telescope corrections were flagged in sub-array 1. ! A total of 551 telescope corrections were flagged in sub-array 2. ! A total of 1257 telescope corrections were flagged in sub-array 3. ! A total of 2945 telescope corrections were flagged in sub-array 4. ! A total of 1226 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 648 telescope corrections were flagged in sub-array 1. ! A total of 551 telescope corrections were flagged in sub-array 2. ! A total of 1257 telescope corrections were flagged in sub-array 3. ! A total of 2947 telescope corrections were flagged in sub-array 4. ! A total of 1229 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.948246Jy sigma=0.019011 ! Fit after self-cal, rms=1.554709Jy sigma=0.015298 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=3.802 mas, bpa=8.663 degrees ! Estimated noise=964.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93902 Jy ! Component: 100 - total flux cleaned = 2.41729 Jy ! Total flux subtracted in 100 components = 2.41729 Jy ! Clean residual min=-0.058061 max=0.176977 Jy/beam ! Clean residual mean=-0.000323 rms=0.017069 Jy/beam ! Combined flux in latest and established models = 2.41729 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.41729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.625765Jy sigma=0.004396 ! Fit after self-cal, rms=0.625990Jy sigma=0.004396 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190015 Jy ! Component: 100 - total flux cleaned = 0.29562 Jy ! Total flux subtracted in 100 components = 0.29562 Jy ! Clean residual min=-0.052973 max=0.077819 Jy/beam ! Clean residual mean=-0.000271 rms=0.012562 Jy/beam ! Combined flux in latest and established models = 2.71291 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 2.71291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.583161Jy sigma=0.003528 ! Fit after self-cal, rms=0.583019Jy sigma=0.003527 ! Inverting map ! Added new window around map position (0.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0813907 Jy ! Component: 100 - total flux cleaned = 0.135811 Jy ! Total flux subtracted in 100 components = 0.135811 Jy ! Clean residual min=-0.049614 max=0.050346 Jy/beam ! Clean residual mean=-0.000248 rms=0.011403 Jy/beam ! Combined flux in latest and established models = 2.84872 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 2.84872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577636Jy sigma=0.003364 ! Fit after self-cal, rms=0.577086Jy sigma=0.003357 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=4.353 mas, bpa=5.39 degrees ! Estimated noise=651.927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339674 Jy ! Component: 100 - total flux cleaned = 0.0350395 Jy ! Component: 150 - total flux cleaned = 0.0335411 Jy ! Component: 200 - total flux cleaned = 0.0340784 Jy ! Total flux subtracted in 200 components = 0.0340784 Jy ! Clean residual min=-0.051995 max=0.048263 Jy/beam ! Clean residual mean=-0.000253 rms=0.012686 Jy/beam ! Combined flux in latest and established models = 2.8828 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 2.8828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572079Jy sigma=0.003305 ! Fit after self-cal, rms=0.571894Jy sigma=0.003299 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.03 KP 1.00* LA 1.00* MA 1.00* ! MK 1.07 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 0.88 TC 1.26 TS 1.14 ! WF 1.00* WZ 1.00* ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 0.90 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.15 ON 1.15 OV 1.00* ! PT 1.00* SC 0.95 TC 1.09 TS 1.00* ! WF 1.03 WZ 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 FD 0.98 GG 1.00* HN 0.99 ! KK 1.00* KP 1.03 LA 1.03 MA 1.00* ! MK 1.00* NL 1.02 ON 1.32 OV 1.38 ! PT 0.95 SC 0.88 TC 1.18 TS 1.00* ! WF 1.06 WZ 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 0.93 GG 1.00* HN 0.92 ! KK 1.08 KP 0.92 LA 0.95 MA 1.00* ! MK 0.98 NL 1.00 ON 1.00* OV 0.92 ! PT 0.95 SC 0.90 TC 1.08 TS 1.00* ! WF 1.17 WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.03 KP 1.00* LA 1.00* MA 1.00* ! MK 1.05 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 0.89 TC 1.11 TS 1.15 ! WF 1.00* WZ 1.00* ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.04 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.10 ON 1.05 OV 1.00* ! PT 1.00* SC 1.01 TC 1.06 TS 1.00* ! WF 0.99 WZ 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.99 GG 1.00* HN 1.02 ! KK 1.00* KP 1.10 LA 1.04 MA 1.00* ! MK 1.00* NL 0.99 ON 1.26 OV 1.04 ! PT 0.95 SC 0.92 TC 0.96 TS 1.00* ! WF 1.01 WZ 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.93 GG 1.00* HN 1.00 ! KK 1.09 KP 0.98 LA 0.95 MA 1.00* ! MK 1.07 NL 0.94 ON 1.00* OV 0.91 ! PT 0.95 SC 0.92 TC 1.02 TS 1.00* ! WF 1.07 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.03 KP 1.00* LA 1.00* MA 1.00* ! MK 1.01 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.05 TC 1.15 TS 1.19 ! WF 1.00* WZ 1.00* ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.06 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.08 ON 1.09 OV 1.00* ! PT 1.00* SC 1.13 TC 0.98 TS 1.00* ! WF 0.98 WZ 1.00* ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.99 GG 1.00* HN 1.02 ! KK 1.00* KP 1.08 LA 0.99 MA 1.00* ! MK 1.00* NL 0.98 ON 1.00* OV 0.95 ! PT 0.96 SC 1.03 TC 0.95 TS 1.00* ! WF 1.00 WZ 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.94 GG 1.00* HN 1.01 ! KK 1.08 KP 0.97 LA 0.92 MA 1.00* ! MK 1.03 NL 0.95 ON 1.00* OV 1.05 ! PT 0.96 SC 1.07 TC 0.96 TS 1.00* ! WF 1.12 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.02 KP 1.00* LA 1.00* MA 1.00* ! MK 0.94 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.08 TC 1.09 TS 1.17 ! WF 1.00* WZ 1.00* ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 0.89 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.13 ON 1.12 OV 1.00* ! PT 1.00* SC 1.14 TC 1.14 TS 1.00* ! WF 0.97 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.99 GG 1.00* HN 1.01 ! KK 1.00* KP 1.09 LA 1.04 MA 1.00* ! MK 1.00* NL 1.03 ON 1.00* OV 1.00 ! PT 0.99 SC 1.03 TC 0.97 TS 1.00* ! WF 1.01 WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.93 GG 1.00* HN 0.74 ! KK 1.09 KP 0.98 LA 0.95 MA 1.00* ! MK 0.98 NL 1.01 ON 1.00* OV 1.02 ! PT 0.99 SC 1.11 TC 1.03 TS 1.00* ! WF 1.12 WZ 1.00* ! ! ! Fit before self-cal, rms=0.571894Jy sigma=0.003299 ! Fit after self-cal, rms=0.531048Jy sigma=0.002459 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=4.478 mas, bpa=3.739 degrees ! Estimated noise=658.826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691063 Jy ! Component: 100 - total flux cleaned = 0.00723105 Jy ! Component: 150 - total flux cleaned = 0.00786806 Jy ! Component: 200 - total flux cleaned = 0.00869484 Jy ! Total flux subtracted in 200 components = 0.00869484 Jy ! Clean residual min=-0.029954 max=0.036982 Jy/beam ! Clean residual mean=0.000588 rms=0.008062 Jy/beam ! Combined flux in latest and established models = 2.8915 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 2.8915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.530216Jy sigma=0.002451 ! Fit after self-cal, rms=0.530562Jy sigma=0.002450 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.530562Jy sigma=0.002450 ! Fit after self-cal, rms=0.527182Jy sigma=0.002372 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=4.486 mas, bpa=3.728 degrees ! Estimated noise=658.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00580855 Jy ! Component: 100 - total flux cleaned = -0.00673182 Jy ! Component: 150 - total flux cleaned = -0.00673072 Jy ! Component: 200 - total flux cleaned = -0.00672954 Jy ! Total flux subtracted in 200 components = -0.00672954 Jy ! Clean residual min=-0.029430 max=0.033580 Jy/beam ! Clean residual mean=0.001332 rms=0.007632 Jy/beam ! Combined flux in latest and established models = 2.88477 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 2.88477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526806Jy sigma=0.002366 ! Fit after self-cal, rms=0.526776Jy sigma=0.002366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182407 Jy ! Component: 100 - total flux cleaned = 0.019555 Jy ! Component: 150 - total flux cleaned = 0.0177134 Jy ! Component: 200 - total flux cleaned = 0.0173068 Jy ! Total flux subtracted in 200 components = 0.0173068 Jy ! Clean residual min=-0.026269 max=0.030030 Jy/beam ! Clean residual mean=0.001124 rms=0.007120 Jy/beam ! Combined flux in latest and established models = 2.90207 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 2.90207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525084Jy sigma=0.002334 ! Fit after self-cal, rms=0.524857Jy sigma=0.002332 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524857Jy sigma=0.002332 ! Fit after self-cal, rms=0.515014Jy sigma=0.002103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=4.492 mas, bpa=3.794 degrees ! Estimated noise=657.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271355 Jy ! Component: 100 - total flux cleaned = 0.00243414 Jy ! Component: 150 - total flux cleaned = 0.00241307 Jy ! Component: 200 - total flux cleaned = 0.00206058 Jy ! Total flux subtracted in 200 components = 0.00206058 Jy ! Clean residual min=-0.010638 max=0.020091 Jy/beam ! Clean residual mean=0.001194 rms=0.003113 Jy/beam ! Combined flux in latest and established models = 2.90413 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 2.90413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514599Jy sigma=0.002098 ! Fit after self-cal, rms=0.514642Jy sigma=0.002097 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190433 Jy ! Component: 100 - total flux cleaned = 0.0200278 Jy ! Component: 150 - total flux cleaned = 0.019716 Jy ! Component: 200 - total flux cleaned = 0.0196975 Jy ! Total flux subtracted in 200 components = 0.0196975 Jy ! Clean residual min=-0.010229 max=0.012051 Jy/beam ! Clean residual mean=0.000967 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 2.92383 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 2.92383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513630Jy sigma=0.002085 ! Fit after self-cal, rms=0.513531Jy sigma=0.002083 ! Inverting map ! Added new window around map position (-29.5, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011222 Jy ! Component: 100 - total flux cleaned = 0.0125869 Jy ! Component: 150 - total flux cleaned = 0.0123784 Jy ! Component: 200 - total flux cleaned = 0.0123805 Jy ! Total flux subtracted in 200 components = 0.0123805 Jy ! Clean residual min=-0.011502 max=0.011156 Jy/beam ! Clean residual mean=0.000833 rms=0.002699 Jy/beam ! Combined flux in latest and established models = 2.93621 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 2.93621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513038Jy sigma=0.002079 ! Fit after self-cal, rms=0.512964Jy sigma=0.002079 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512964Jy sigma=0.002079 ! Fit after self-cal, rms=0.513153Jy sigma=0.002075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.102 mas, bmaj=11.44 mas, bpa=-13.12 degrees ! Estimated noise=751.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703833 Jy ! Component: 100 - total flux cleaned = 0.00808634 Jy ! Component: 150 - total flux cleaned = 0.00910035 Jy ! Component: 200 - total flux cleaned = 0.00961774 Jy ! Total flux subtracted in 200 components = 0.00961774 Jy ! Clean residual min=-0.014327 max=0.013989 Jy/beam ! Clean residual mean=0.001878 rms=0.003630 Jy/beam ! Combined flux in latest and established models = 2.94583 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 143 components and 2.94583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513047Jy sigma=0.002073 ! Fit after self-cal, rms=0.513033Jy sigma=0.002072 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182106 Jy ! Component: 100 - total flux cleaned = 0.00212874 Jy ! Component: 150 - total flux cleaned = 0.00238969 Jy ! Component: 200 - total flux cleaned = 0.00262526 Jy ! Total flux subtracted in 200 components = 0.00262526 Jy ! Clean residual min=-0.014569 max=0.013803 Jy/beam ! Clean residual mean=0.001818 rms=0.003605 Jy/beam ! Combined flux in latest and established models = 2.94845 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 2.94845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513003Jy sigma=0.002072 ! Fit after self-cal, rms=0.513007Jy sigma=0.002071 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=4.494 mas, bpa=3.797 degrees ! Estimated noise=657.772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.218 x 4.494 at 3.797 degrees (North through East) ! Clean map min=-0.010764 max=2.4728 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513007Jy sigma=0.002071 ! Fit after self-cal, rms=0.507702Jy sigma=0.001711 ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=4.497 mas, bpa=3.808 degrees ! Estimated noise=657.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00375879 Jy ! Component: 100 - total flux cleaned = -0.0035565 Jy ! Component: 150 - total flux cleaned = -0.00407362 Jy ! Component: 200 - total flux cleaned = -0.00422998 Jy ! Total flux subtracted in 200 components = -0.00422998 Jy ! Clean residual min=-0.006167 max=0.008885 Jy/beam ! Clean residual mean=0.000941 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 2.94422 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 181 components and 2.94423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507490Jy sigma=0.001707 ! Fit after self-cal, rms=0.507470Jy sigma=0.001707 ! Inverting map ! Added new window around map position (-17, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800095 Jy ! Component: 100 - total flux cleaned = 0.00990733 Jy ! Component: 150 - total flux cleaned = 0.0108299 Jy ! Component: 200 - total flux cleaned = 0.0112502 Jy ! Total flux subtracted in 200 components = 0.0112502 Jy ! Clean residual min=-0.006034 max=0.007881 Jy/beam ! Clean residual mean=0.000872 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 2.95548 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 197 components and 2.95548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507168Jy sigma=0.001704 ! Fit after self-cal, rms=0.507154Jy sigma=0.001704 ! Inverting map ! Added new window around map position (13, 68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815216 Jy ! Component: 100 - total flux cleaned = 0.012644 Jy ! Component: 150 - total flux cleaned = 0.0149085 Jy ! Component: 200 - total flux cleaned = 0.01559 Jy ! Total flux subtracted in 200 components = 0.01559 Jy ! Clean residual min=-0.005797 max=0.006511 Jy/beam ! Clean residual mean=0.000699 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 2.97107 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 215 components and 2.97107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506869Jy sigma=0.001700 ! Fit after self-cal, rms=0.506820Jy sigma=0.001700 ! Inverting map ! Added new window around map position (-13, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564338 Jy ! Component: 100 - total flux cleaned = 0.00812849 Jy ! Component: 150 - total flux cleaned = 0.0094503 Jy ! Component: 200 - total flux cleaned = 0.0103249 Jy ! Total flux subtracted in 200 components = 0.0103249 Jy ! Clean residual min=-0.005539 max=0.006049 Jy/beam ! Clean residual mean=0.000583 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 2.98139 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 226 components and 2.98139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506641Jy sigma=0.001699 ! Fit after self-cal, rms=0.506595Jy sigma=0.001698 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506595Jy sigma=0.001698 ! Fit after self-cal, rms=0.507656Jy sigma=0.001697 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.533 mas, bmaj=3.831 mas, bpa=7.54 degrees ! Estimated noise=979.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92683 Jy ! Component: 100 - total flux cleaned = 2.38352 Jy ! Component: 150 - total flux cleaned = 2.55086 Jy ! Component: 200 - total flux cleaned = 2.6483 Jy ! Total flux subtracted in 200 components = 2.6483 Jy ! Clean residual min=-0.020497 max=0.052065 Jy/beam ! Clean residual mean=0.000084 rms=0.005618 Jy/beam ! Combined flux in latest and established models = 2.6483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 2.6483 Jy ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=4.499 mas, bpa=3.819 degrees ! Estimated noise=657.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0963902 Jy ! Component: 100 - total flux cleaned = 0.154419 Jy ! Component: 150 - total flux cleaned = 0.192763 Jy ! Component: 200 - total flux cleaned = 0.218592 Jy ! Total flux subtracted in 200 components = 0.218592 Jy ! Clean residual min=-0.007427 max=0.018532 Jy/beam ! Clean residual mean=0.001889 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 2.86689 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 62 components and 2.86689 Jy ! Inverting map ! Added new window around map position (4.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194307 Jy ! Component: 100 - total flux cleaned = 0.0340068 Jy ! Component: 150 - total flux cleaned = 0.0463049 Jy ! Component: 200 - total flux cleaned = 0.0569276 Jy ! Total flux subtracted in 200 components = 0.0569276 Jy ! Clean residual min=-0.006147 max=0.008894 Jy/beam ! Clean residual mean=0.001263 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 2.92382 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 86 components and 2.92382 Jy ! Inverting map ! Added new window around map position (107.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00980339 Jy ! Component: 100 - total flux cleaned = 0.0181699 Jy ! Component: 150 - total flux cleaned = 0.0256814 Jy ! Component: 200 - total flux cleaned = 0.0324434 Jy ! Total flux subtracted in 200 components = 0.0324434 Jy ! Clean residual min=-0.005644 max=0.007009 Jy/beam ! Clean residual mean=0.000928 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 2.95626 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 105 components and 2.95626 Jy ! Inverting map ! Added new window around map position (9, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699443 Jy ! Component: 100 - total flux cleaned = 0.0126759 Jy ! Component: 150 - total flux cleaned = 0.0178288 Jy ! Component: 200 - total flux cleaned = 0.0212438 Jy ! Total flux subtracted in 200 components = 0.0212438 Jy ! Clean residual min=-0.005541 max=0.006263 Jy/beam ! Clean residual mean=0.000704 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 2.9775 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 120 components and 2.9775 Jy ! Inverting map ! Added new window around map position (21.5, 79). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580772 Jy ! Component: 100 - total flux cleaned = 0.00869726 Jy ! Component: 150 - total flux cleaned = 0.0104431 Jy ! Component: 200 - total flux cleaned = 0.0119588 Jy ! Total flux subtracted in 200 components = 0.0119588 Jy ! Clean residual min=-0.005452 max=0.005975 Jy/beam ! Clean residual mean=0.000577 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 2.98946 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 139 components and 2.98946 Jy ! Inverting map ! Added new window around map position (58, 85). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551306 Jy ! Component: 100 - total flux cleaned = 0.00685528 Jy ! Component: 150 - total flux cleaned = 0.00826387 Jy ! Component: 200 - total flux cleaned = 0.00947952 Jy ! Total flux subtracted in 200 components = 0.00947952 Jy ! Clean residual min=-0.005391 max=0.005482 Jy/beam ! Clean residual mean=0.000476 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 2.99894 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 155 components and 2.99894 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.101 mas, bmaj=11.43 mas, bpa=-13.17 degrees ! Estimated noise=751.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399879 Jy ! Component: 100 - total flux cleaned = 0.00694147 Jy ! Component: 150 - total flux cleaned = 0.00939619 Jy ! Component: 200 - total flux cleaned = 0.0110284 Jy ! Total flux subtracted in 200 components = 0.0110284 Jy ! Clean residual min=-0.004604 max=0.006177 Jy/beam ! Clean residual mean=0.000743 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 3.00997 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140092 Jy ! Component: 100 - total flux cleaned = 0.00267533 Jy ! Component: 150 - total flux cleaned = 0.00358827 Jy ! Component: 200 - total flux cleaned = 0.00432116 Jy ! Total flux subtracted in 200 components = 0.00432116 Jy ! Clean residual min=-0.004534 max=0.006159 Jy/beam ! Clean residual mean=0.000652 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 3.01429 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 193 components and 3.01429 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=4.499 mas, bpa=3.819 degrees ! Estimated noise=657.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259625 Jy ! Component: 100 - total flux cleaned = -0.00259805 Jy ! Component: 150 - total flux cleaned = -0.0024789 Jy ! Component: 200 - total flux cleaned = -0.00236063 Jy ! Total flux subtracted in 200 components = -0.00236063 Jy ! Clean residual min=-0.005506 max=0.005571 Jy/beam ! Clean residual mean=0.000336 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 3.01193 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 210 components and 3.01193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507551Jy sigma=0.001694 ! Fit after self-cal, rms=0.507519Jy sigma=0.001692 wmodel J1550+0527_S_2003_06_18_pus_map.mod ! Writing 210 model components to file: J1550+0527_S_2003_06_18_pus_map.mod wobs J1550+0527_S_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J1550+0527_S_2003_06_18_pus_uvs.fits wwins J1550+0527_S_2003_06_18_pus_map.win ! wwins: Wrote 13 windows to J1550+0527_S_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940081 Jy ! Component: 100 - total flux cleaned = 0.00221422 Jy ! Component: 150 - total flux cleaned = 0.00335484 Jy ! Component: 200 - total flux cleaned = 0.00412049 Jy ! Component: 250 - total flux cleaned = 0.00470163 Jy ! Component: 300 - total flux cleaned = 0.00551241 Jy ! Component: 350 - total flux cleaned = 0.00614837 Jy ! Component: 400 - total flux cleaned = 0.00669538 Jy ! Component: 450 - total flux cleaned = 0.00715719 Jy ! Component: 500 - total flux cleaned = 0.00776363 Jy ! Component: 550 - total flux cleaned = 0.00813675 Jy ! Component: 600 - total flux cleaned = 0.00857852 Jy ! Component: 650 - total flux cleaned = 0.00894164 Jy ! Component: 700 - total flux cleaned = 0.00937323 Jy ! Component: 750 - total flux cleaned = 0.00986893 Jy ! Component: 800 - total flux cleaned = 0.0102193 Jy ! Component: 850 - total flux cleaned = 0.0106345 Jy ! Component: 900 - total flux cleaned = 0.0108401 Jy ! Component: 950 - total flux cleaned = 0.011044 Jy ! Component: 1000 - total flux cleaned = 0.0114475 Jy ! Component: 1050 - total flux cleaned = 0.0116471 Jy ! Component: 1100 - total flux cleaned = 0.0119104 Jy ! Component: 1150 - total flux cleaned = 0.0121716 Jy ! Component: 1200 - total flux cleaned = 0.0123655 Jy ! Component: 1250 - total flux cleaned = 0.0126855 Jy ! Component: 1300 - total flux cleaned = 0.0128121 Jy ! Component: 1350 - total flux cleaned = 0.0130014 Jy ! Component: 1400 - total flux cleaned = 0.0133761 Jy ! Component: 1450 - total flux cleaned = 0.0134387 Jy ! Component: 1500 - total flux cleaned = 0.0137461 Jy ! Component: 1550 - total flux cleaned = 0.0140507 Jy ! Component: 1600 - total flux cleaned = 0.0141712 Jy ! Component: 1650 - total flux cleaned = 0.0144114 Jy ! Component: 1700 - total flux cleaned = 0.0147692 Jy ! Component: 1750 - total flux cleaned = 0.0148284 Jy ! Component: 1800 - total flux cleaned = 0.0150638 Jy ! Component: 1850 - total flux cleaned = 0.0151806 Jy ! Component: 1900 - total flux cleaned = 0.0152969 Jy ! Component: 1950 - total flux cleaned = 0.0155277 Jy ! Component: 2000 - total flux cleaned = 0.0156426 Jy ! Component: 2050 - total flux cleaned = 0.0158709 Jy ! Component: 2100 - total flux cleaned = 0.0159279 Jy ! Component: 2150 - total flux cleaned = 0.0162097 Jy ! Component: 2200 - total flux cleaned = 0.016322 Jy ! Component: 2250 - total flux cleaned = 0.0164894 Jy ! Component: 2300 - total flux cleaned = 0.0166 Jy ! Component: 2350 - total flux cleaned = 0.0168753 Jy ! Component: 2400 - total flux cleaned = 0.0169298 Jy ! Component: 2450 - total flux cleaned = 0.0170389 Jy ! Component: 2500 - total flux cleaned = 0.0171473 Jy ! Component: 2550 - total flux cleaned = 0.0173629 Jy ! Component: 2600 - total flux cleaned = 0.0173632 Jy ! Component: 2650 - total flux cleaned = 0.0175768 Jy ! Component: 2700 - total flux cleaned = 0.0176831 Jy ! Component: 2750 - total flux cleaned = 0.0178943 Jy ! Component: 2800 - total flux cleaned = 0.0179468 Jy ! Component: 2850 - total flux cleaned = 0.0181033 Jy ! Component: 2900 - total flux cleaned = 0.0181553 Jy ! Component: 2950 - total flux cleaned = 0.0183103 Jy ! Component: 3000 - total flux cleaned = 0.0183615 Jy ! Component: 3050 - total flux cleaned = 0.0185149 Jy ! Component: 3100 - total flux cleaned = 0.0186167 Jy ! Component: 3150 - total flux cleaned = 0.0186169 Jy ! Component: 3200 - total flux cleaned = 0.0189195 Jy ! Component: 3250 - total flux cleaned = 0.0190199 Jy ! Component: 3300 - total flux cleaned = 0.0189697 Jy ! Component: 3350 - total flux cleaned = 0.0190695 Jy ! Component: 3400 - total flux cleaned = 0.0191687 Jy ! Component: 3450 - total flux cleaned = 0.0193167 Jy ! Component: 3500 - total flux cleaned = 0.0193657 Jy ! Component: 3550 - total flux cleaned = 0.0195123 Jy ! Component: 3600 - total flux cleaned = 0.0196098 Jy ! Component: 3650 - total flux cleaned = 0.0196581 Jy ! Component: 3700 - total flux cleaned = 0.0198514 Jy ! Component: 3750 - total flux cleaned = 0.0198997 Jy ! Component: 3800 - total flux cleaned = 0.0199952 Jy ! Component: 3850 - total flux cleaned = 0.0200427 Jy ! Component: 3900 - total flux cleaned = 0.0201378 Jy ! Component: 3950 - total flux cleaned = 0.0202324 Jy ! Component: 4000 - total flux cleaned = 0.0202795 Jy ! Component: 4050 - total flux cleaned = 0.0204672 Jy ! Total flux subtracted in 4096 components = 0.0204672 Jy ! Clean residual min=-0.002332 max=0.002862 Jy/beam ! Clean residual mean=0.000121 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 3.0324 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 500 components and 3.0324 Jy wmap "J1550+0527_S_2003_06_18_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 4.499 at 3.819 degrees (North through East) ! Clean map min=-0.0047158 max=2.482 Jy/beam ! Writing clean map to FITS file: J1550+0527_S_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.48196 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000784205 device "J1550+0527_S_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J1550+0527_S_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0947886 0.0947886 0.189577 0.379154 0.758309 1.51662 3.03324 6.06647 12.1329 24.2659 48.5318 97.0635 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.481 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 4.499 at 3.819 degrees (North through East) ! Clean map min=-0.0047158 max=2.482 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1550+0527_S_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J1550+0527_S_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1550+0527_S_2003_06_18_pus_uvs.log closed on Thu Jan 25 00:27:35 2007