! Started logfile: J1230+1223_X_2003_06_18_pus_uvs.log on Thu Jan 18 21:33:23 2007 obs J1230+1223_X_2003_06_18_pus_uva.fits ! Reading UV FITS file: J1230+1223_X_2003_06_18_pus_uva.fits ! AN table 1: 141 integrations on 153 of 153 possible baselines. ! AN table 2: 27 integrations on 153 of 153 possible baselines. ! AN table 3: 45 integrations on 153 of 153 possible baselines. ! AN table 4: 93 integrations on 153 of 153 possible baselines. ! AN table 5: 47 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0720991 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2235 lines of history. ! ! Reading 15576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 1024 float field_cell field_cell = 0.1 float taper_size taper_size = 120. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1883 telescope corrections were flagged in sub-array 1. ! A total of 415 telescope corrections were flagged in sub-array 2. ! A total of 810 telescope corrections were flagged in sub-array 3. ! A total of 1155 telescope corrections were flagged in sub-array 4. ! A total of 800 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1883 telescope corrections were flagged in sub-array 1. ! A total of 415 telescope corrections were flagged in sub-array 2. ! A total of 810 telescope corrections were flagged in sub-array 3. ! A total of 1155 telescope corrections were flagged in sub-array 4. ! A total of 800 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1883 telescope corrections were flagged in sub-array 1. ! A total of 415 telescope corrections were flagged in sub-array 2. ! A total of 810 telescope corrections were flagged in sub-array 3. ! A total of 1155 telescope corrections were flagged in sub-array 4. ! A total of 800 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1883 telescope corrections were flagged in sub-array 1. ! A total of 415 telescope corrections were flagged in sub-array 2. ! A total of 810 telescope corrections were flagged in sub-array 3. ! A total of 1155 telescope corrections were flagged in sub-array 4. ! A total of 800 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.842649Jy sigma=0.010756 ! Fit after self-cal, rms=0.553066Jy sigma=0.007125 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6098 mas, bmaj=1.706 mas, bpa=-1.457 degrees ! Estimated noise=640.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.592706 Jy ! Component: 100 - total flux cleaned = 0.832357 Jy ! Total flux subtracted in 100 components = 0.832357 Jy ! Clean residual min=-0.038161 max=0.136619 Jy/beam ! Clean residual mean=0.000253 rms=0.014091 Jy/beam ! Combined flux in latest and established models = 0.832357 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.832357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.436454Jy sigma=0.005650 ! Fit after self-cal, rms=0.434840Jy sigma=0.005639 ! Inverting map ! Added new window around map position (-0.9, 0.3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140722 Jy ! Component: 100 - total flux cleaned = 0.228255 Jy ! Total flux subtracted in 100 components = 0.228255 Jy ! Clean residual min=-0.029883 max=0.089179 Jy/beam ! Clean residual mean=0.000105 rms=0.010373 Jy/beam ! Combined flux in latest and established models = 1.06061 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 1.06061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359024Jy sigma=0.004317 ! Fit after self-cal, rms=0.356622Jy sigma=0.004291 ! Inverting map ! Added new window around map position (-2.2, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924301 Jy ! Component: 100 - total flux cleaned = 0.154924 Jy ! Total flux subtracted in 100 components = 0.154924 Jy ! Clean residual min=-0.024240 max=0.061930 Jy/beam ! Clean residual mean=0.000036 rms=0.007978 Jy/beam ! Combined flux in latest and established models = 1.21554 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 84 components and 1.21554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316492Jy sigma=0.003538 ! Fit after self-cal, rms=0.313799Jy sigma=0.003501 ! Inverting map ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602518 Jy ! Component: 100 - total flux cleaned = 0.105828 Jy ! Total flux subtracted in 100 components = 0.105828 Jy ! Clean residual min=-0.018319 max=0.043638 Jy/beam ! Clean residual mean=-0.000016 rms=0.006487 Jy/beam ! Combined flux in latest and established models = 1.32136 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 127 components and 1.32136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292628Jy sigma=0.003073 ! Fit after self-cal, rms=0.292374Jy sigma=0.003070 ! Inverting map ! Added new window around map position (-3.3, 0.3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463089 Jy ! Component: 100 - total flux cleaned = 0.0817178 Jy ! Total flux subtracted in 100 components = 0.0817178 Jy ! Clean residual min=-0.016152 max=0.024585 Jy/beam ! Clean residual mean=-0.000051 rms=0.005520 Jy/beam ! Combined flux in latest and established models = 1.40308 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 168 components and 1.40308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279547Jy sigma=0.002796 ! Fit after self-cal, rms=0.279123Jy sigma=0.002790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.923 mas, bpa=-1.799 degrees ! Estimated noise=442.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572552 Jy ! Component: 100 - total flux cleaned = 0.0990823 Jy ! Component: 150 - total flux cleaned = 0.131696 Jy ! Component: 200 - total flux cleaned = 0.157727 Jy ! Total flux subtracted in 200 components = 0.157727 Jy ! Clean residual min=-0.020243 max=0.037799 Jy/beam ! Clean residual mean=0.000318 rms=0.009006 Jy/beam ! Combined flux in latest and established models = 1.56081 Jy ! Performing phase self-cal ! Adding 131 model components to the UV plane model. ! The established model now contains 274 components and 1.56081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264943Jy sigma=0.002449 ! Fit after self-cal, rms=0.264491Jy sigma=0.002439 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 GG 1.00* HN 0.95 ! KK 1.06 KP 1.05 LA 0.96 MA 1.00* ! MK 1.01 NL 1.09 ON 1.00* OV 0.99 ! PT 1.00 SC 0.99 TC 1.00* TS 1.05 ! WF 1.03 WZ 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00* GG 1.00* HN 1.00* ! KK 1.15 KP 1.00* LA 1.00* MA 1.00* ! MK 0.98 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* TC 1.00* TS 1.08 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.08 GG 1.00* HN 0.96 ! KK 1.10 KP 1.01 LA 0.87 MA 1.00* ! MK 1.00 NL 1.09 ON 1.00* OV 1.01 ! PT 0.88 SC 1.00* TC 1.00* TS 1.07 ! WF 1.03 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 1.10 GG 1.00* HN 1.00* ! KK 1.00* KP 0.92 LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 0.88 ! PT 1.00* SC 1.00* TC 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 GG 1.00* HN 0.96 ! KK 1.13 KP 1.01 LA 0.96 MA 1.00* ! MK 1.02 NL 1.05 ON 1.00* OV 0.97 ! PT 1.04 SC 0.96 TC 1.00* TS 1.04 ! WF 1.08 WZ 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00* GG 1.00* HN 1.00* ! KK 1.07 KP 1.00* LA 1.00* MA 1.00* ! MK 1.05 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* TC 1.00* TS 1.10 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 GG 1.00* HN 0.94 ! KK 1.14 KP 0.95 LA 0.88 MA 1.00* ! MK 1.01 NL 1.04 ON 1.00* OV 1.01 ! PT 0.92 SC 1.00* TC 1.00* TS 1.06 ! WF 1.06 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 1.05 GG 1.00* HN 1.00* ! KK 1.00* KP 0.88 LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 0.88 ! PT 1.00* SC 1.00* TC 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 GG 1.00* HN 0.97 ! KK 1.18 KP 1.05 LA 0.97 MA 1.00* ! MK 1.02 NL 1.01 ON 1.00* OV 1.01 ! PT 1.06 SC 0.94 TC 1.00* TS 0.98 ! WF 0.96 WZ 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00* GG 1.00* HN 1.00* ! KK 1.14 KP 1.00* LA 1.00* MA 1.00* ! MK 1.05 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* TC 1.00* TS 1.06 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.04 GG 1.00* HN 0.93 ! KK 1.20 KP 1.00 LA 0.89 MA 1.00* ! MK 0.99 NL 1.02 ON 1.00* OV 1.03 ! PT 0.95 SC 1.00* TC 1.00* TS 1.05 ! WF 0.96 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.11 FD 1.08 GG 1.00* HN 1.00* ! KK 1.00* KP 0.94 LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 0.90 ! PT 1.00* SC 1.00* TC 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 GG 1.00* HN 0.98 ! KK 1.13 KP 0.99 LA 0.96 MA 1.00* ! MK 1.05 NL 1.02 ON 1.00* OV 1.01 ! PT 1.06 SC 0.98 TC 1.00* TS 0.95 ! WF 1.03 WZ 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00* GG 1.00* HN 1.00* ! KK 1.10 KP 1.00* LA 1.00* MA 1.00* ! MK 1.06 NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* TC 1.00* TS 1.09 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.01 GG 1.00* HN 0.96 ! KK 1.11 KP 0.96 LA 0.87 MA 1.00* ! MK 1.04 NL 1.02 ON 1.00* OV 1.02 ! PT 0.95 SC 1.00* TC 1.00* TS 1.00 ! WF 0.95 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 1.05 GG 1.00* HN 1.00* ! KK 1.00* KP 0.89 LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 0.90 ! PT 1.00* SC 1.00* TC 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.264491Jy sigma=0.002439 ! Fit after self-cal, rms=0.256313Jy sigma=0.002178 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7103 mas, bmaj=1.988 mas, bpa=-2.109 degrees ! Estimated noise=447.813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112511 Jy ! Component: 100 - total flux cleaned = 0.0133705 Jy ! Component: 150 - total flux cleaned = 0.0135726 Jy ! Component: 200 - total flux cleaned = 0.0132146 Jy ! Total flux subtracted in 200 components = 0.0132146 Jy ! Clean residual min=-0.017970 max=0.030723 Jy/beam ! Clean residual mean=0.000456 rms=0.006212 Jy/beam ! Combined flux in latest and established models = 1.57402 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 293 components and 1.57402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255710Jy sigma=0.002162 ! Fit after self-cal, rms=0.255821Jy sigma=0.002159 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255821Jy sigma=0.002159 ! Fit after self-cal, rms=0.252266Jy sigma=0.002092 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7111 mas, bmaj=1.993 mas, bpa=-2.153 degrees ! Estimated noise=446.958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331972 Jy ! Component: 100 - total flux cleaned = -0.00466588 Jy ! Component: 150 - total flux cleaned = -0.00575548 Jy ! Component: 200 - total flux cleaned = -0.0063865 Jy ! Total flux subtracted in 200 components = -0.0063865 Jy ! Clean residual min=-0.014669 max=0.027504 Jy/beam ! Clean residual mean=0.000526 rms=0.005680 Jy/beam ! Combined flux in latest and established models = 1.56764 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 310 components and 1.56764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251899Jy sigma=0.002086 ! Fit after self-cal, rms=0.251905Jy sigma=0.002085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 7.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283222 Jy ! Component: 100 - total flux cleaned = 0.0432549 Jy ! Component: 150 - total flux cleaned = 0.0525297 Jy ! Component: 200 - total flux cleaned = 0.0592807 Jy ! Total flux subtracted in 200 components = 0.0592807 Jy ! Clean residual min=-0.014022 max=0.022678 Jy/beam ! Clean residual mean=0.000454 rms=0.004675 Jy/beam ! Combined flux in latest and established models = 1.62692 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 396 components and 1.62692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249088Jy sigma=0.002002 ! Fit after self-cal, rms=0.248897Jy sigma=0.001994 ! Inverting map ! Added new window around map position (-7.5, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237747 Jy ! Component: 100 - total flux cleaned = 0.0372018 Jy ! Component: 150 - total flux cleaned = 0.0459654 Jy ! Component: 200 - total flux cleaned = 0.0524605 Jy ! Total flux subtracted in 200 components = 0.0524605 Jy ! Clean residual min=-0.011593 max=0.018700 Jy/beam ! Clean residual mean=0.000240 rms=0.003842 Jy/beam ! Combined flux in latest and established models = 1.67938 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 457 components and 1.67938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246817Jy sigma=0.001932 ! Fit after self-cal, rms=0.246589Jy sigma=0.001926 ! Inverting map ! Added new window around map position (-10.7, 1.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174212 Jy ! Component: 100 - total flux cleaned = 0.0270297 Jy ! Component: 150 - total flux cleaned = 0.0343489 Jy ! Component: 200 - total flux cleaned = 0.0404557 Jy ! Total flux subtracted in 200 components = 0.0404557 Jy ! Clean residual min=-0.011970 max=0.013822 Jy/beam ! Clean residual mean=0.000094 rms=0.003459 Jy/beam ! Combined flux in latest and established models = 1.71983 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 523 components and 1.71983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245250Jy sigma=0.001892 ! Fit after self-cal, rms=0.245158Jy sigma=0.001888 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245158Jy sigma=0.001888 ! Fit after self-cal, rms=0.242490Jy sigma=0.001831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7136 mas, bmaj=1.993 mas, bpa=-2.302 degrees ! Estimated noise=445.674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123192 Jy ! Component: 100 - total flux cleaned = 0.0212139 Jy ! Component: 150 - total flux cleaned = 0.0282617 Jy ! Component: 200 - total flux cleaned = 0.0340929 Jy ! Total flux subtracted in 200 components = 0.0340929 Jy ! Clean residual min=-0.008825 max=0.011532 Jy/beam ! Clean residual mean=0.000038 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 1.75393 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 585 components and 1.75393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241729Jy sigma=0.001806 ! Fit after self-cal, rms=0.241644Jy sigma=0.001805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.4, 5.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107662 Jy ! Component: 100 - total flux cleaned = 0.0169089 Jy ! Component: 150 - total flux cleaned = 0.0220542 Jy ! Component: 200 - total flux cleaned = 0.0251816 Jy ! Total flux subtracted in 200 components = 0.0251816 Jy ! Clean residual min=-0.008457 max=0.008953 Jy/beam ! Clean residual mean=-0.000070 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 1.77911 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 641 components and 1.77911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241069Jy sigma=0.001789 ! Fit after self-cal, rms=0.241052Jy sigma=0.001788 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241052Jy sigma=0.001788 ! Fit after self-cal, rms=0.241195Jy sigma=0.001784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.433 mas, bmaj=2.456 mas, bpa=-9.793 degrees ! Estimated noise=497.718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100118 Jy ! Component: 100 - total flux cleaned = 0.0174394 Jy ! Component: 150 - total flux cleaned = 0.0232718 Jy ! Component: 200 - total flux cleaned = 0.0263902 Jy ! Total flux subtracted in 200 components = 0.0263902 Jy ! Clean residual min=-0.009688 max=0.009619 Jy/beam ! Clean residual mean=-0.000101 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 1.8055 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 680 components and 1.8055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240954Jy sigma=0.001774 ! Fit after self-cal, rms=0.240921Jy sigma=0.001774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317595 Jy ! Component: 100 - total flux cleaned = 0.00479868 Jy ! Component: 150 - total flux cleaned = 0.00627214 Jy ! Component: 200 - total flux cleaned = 0.00732021 Jy ! Total flux subtracted in 200 components = 0.00732021 Jy ! Clean residual min=-0.009164 max=0.009431 Jy/beam ! Clean residual mean=-0.000137 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 1.81282 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 704 components and 1.81282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240859Jy sigma=0.001771 ! Fit after self-cal, rms=0.240847Jy sigma=0.001771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.714 mas, bmaj=1.993 mas, bpa=-2.325 degrees ! Estimated noise=445.424 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.714 x 1.993 at -2.325 degrees (North through East) ! Clean map min=-0.0071838 max=0.70854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240847Jy sigma=0.001771 ! Fit after self-cal, rms=0.404925Jy sigma=0.001602 ! Inverting map and beam ! Estimated beam: bmin=0.714 mas, bmaj=1.993 mas, bpa=-2.31 degrees ! Estimated noise=446.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047185 Jy ! Component: 100 - total flux cleaned = 0.00807576 Jy ! Component: 150 - total flux cleaned = 0.00996642 Jy ! Component: 200 - total flux cleaned = 0.010968 Jy ! Total flux subtracted in 200 components = 0.010968 Jy ! Clean residual min=-0.007476 max=0.007819 Jy/beam ! Clean residual mean=-0.000045 rms=0.001851 Jy/beam ! Combined flux in latest and established models = 1.82378 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 728 components and 1.82378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404827Jy sigma=0.001597 ! Fit after self-cal, rms=0.404837Jy sigma=0.001597 ! Inverting map ! Added new window around map position (-14.5, 3.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756726 Jy ! Component: 100 - total flux cleaned = 0.0115176 Jy ! Component: 150 - total flux cleaned = 0.0130468 Jy ! Component: 200 - total flux cleaned = 0.0144292 Jy ! Total flux subtracted in 200 components = 0.0144292 Jy ! Clean residual min=-0.007017 max=0.006693 Jy/beam ! Clean residual mean=-0.000083 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 1.83821 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 768 components and 1.83821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404679Jy sigma=0.001589 ! Fit after self-cal, rms=0.404657Jy sigma=0.001588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404657Jy sigma=0.001588 ! Fit after self-cal, rms=0.403990Jy sigma=0.001587 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6182 mas, bmaj=1.719 mas, bpa=-1.557 degrees ! Estimated noise=656.166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.590869 Jy ! Component: 100 - total flux cleaned = 0.833215 Jy ! Component: 150 - total flux cleaned = 0.979479 Jy ! Component: 200 - total flux cleaned = 1.08554 Jy ! Total flux subtracted in 200 components = 1.08554 Jy ! Clean residual min=-0.021343 max=0.060950 Jy/beam ! Clean residual mean=0.000186 rms=0.008526 Jy/beam ! Combined flux in latest and established models = 1.08554 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 1.08554 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7143 mas, bmaj=1.992 mas, bpa=-2.328 degrees ! Estimated noise=446.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134868 Jy ! Component: 100 - total flux cleaned = 0.224726 Jy ! Component: 150 - total flux cleaned = 0.288287 Jy ! Component: 200 - total flux cleaned = 0.338567 Jy ! Total flux subtracted in 200 components = 0.338567 Jy ! Clean residual min=-0.016407 max=0.034009 Jy/beam ! Clean residual mean=0.001271 rms=0.008204 Jy/beam ! Combined flux in latest and established models = 1.42411 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 143 components and 1.42411 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.434 mas, bmaj=2.455 mas, bpa=-9.818 degrees ! Estimated noise=498.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651411 Jy ! Component: 100 - total flux cleaned = 0.116793 Jy ! Component: 150 - total flux cleaned = 0.158767 Jy ! Component: 200 - total flux cleaned = 0.193513 Jy ! Total flux subtracted in 200 components = 0.193513 Jy ! Clean residual min=-0.015263 max=0.027236 Jy/beam ! Clean residual mean=0.001084 rms=0.006998 Jy/beam ! Combined flux in latest and established models = 1.61762 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293765 Jy ! Component: 100 - total flux cleaned = 0.054573 Jy ! Component: 150 - total flux cleaned = 0.0765617 Jy ! Component: 200 - total flux cleaned = 0.095926 Jy ! Total flux subtracted in 200 components = 0.095926 Jy ! Clean residual min=-0.012082 max=0.018329 Jy/beam ! Clean residual mean=0.000607 rms=0.004523 Jy/beam ! Combined flux in latest and established models = 1.71355 Jy ! Adding 234 model components to the UV plane model. ! The established model now contains 361 components and 1.71355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7143 mas, bmaj=1.992 mas, bpa=-2.328 degrees ! Estimated noise=446.162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142203 Jy ! Component: 100 - total flux cleaned = 0.0265646 Jy ! Component: 150 - total flux cleaned = 0.0376527 Jy ! Component: 200 - total flux cleaned = 0.0476975 Jy ! Total flux subtracted in 200 components = 0.0476975 Jy ! Clean residual min=-0.008678 max=0.011019 Jy/beam ! Clean residual mean=0.000208 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 1.76124 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 407 components and 1.76124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404827Jy sigma=0.001631 ! Fit after self-cal, rms=0.404681Jy sigma=0.001627 wmodel J1230+1223_X_2003_06_18_pus_map.mod ! Writing 407 model components to file: J1230+1223_X_2003_06_18_pus_map.mod wobs J1230+1223_X_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J1230+1223_X_2003_06_18_pus_uvs.fits wwins J1230+1223_X_2003_06_18_pus_map.win ! wwins: Wrote 10 windows to J1230+1223_X_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449784 Jy ! Component: 100 - total flux cleaned = 0.00718168 Jy ! Component: 150 - total flux cleaned = 0.00921904 Jy ! Component: 200 - total flux cleaned = 0.0112644 Jy ! Component: 250 - total flux cleaned = 0.0132056 Jy ! Component: 300 - total flux cleaned = 0.0148235 Jy ! Component: 350 - total flux cleaned = 0.0165067 Jy ! Component: 400 - total flux cleaned = 0.0181391 Jy ! Component: 450 - total flux cleaned = 0.0194988 Jy ! Component: 500 - total flux cleaned = 0.0210453 Jy ! Component: 550 - total flux cleaned = 0.0223367 Jy ! Component: 600 - total flux cleaned = 0.0239136 Jy ! Component: 650 - total flux cleaned = 0.0253513 Jy ! Component: 700 - total flux cleaned = 0.0267569 Jy ! Component: 750 - total flux cleaned = 0.0281344 Jy ! Component: 800 - total flux cleaned = 0.0294863 Jy ! Component: 850 - total flux cleaned = 0.0304362 Jy ! Component: 900 - total flux cleaned = 0.0317421 Jy ! Component: 950 - total flux cleaned = 0.0326584 Jy ! Component: 1000 - total flux cleaned = 0.0335607 Jy ! Component: 1050 - total flux cleaned = 0.034713 Jy ! Component: 1100 - total flux cleaned = 0.0355858 Jy ! Component: 1150 - total flux cleaned = 0.0367025 Jy ! Component: 1200 - total flux cleaned = 0.0377181 Jy ! Component: 1250 - total flux cleaned = 0.0386338 Jy ! Component: 1300 - total flux cleaned = 0.0393719 Jy ! Component: 1350 - total flux cleaned = 0.0402637 Jy ! Component: 1400 - total flux cleaned = 0.0412211 Jy ! Component: 1450 - total flux cleaned = 0.0420092 Jy ! Component: 1500 - total flux cleaned = 0.0427871 Jy ! Component: 1550 - total flux cleaned = 0.0436333 Jy ! Component: 1600 - total flux cleaned = 0.044619 Jy ! Component: 1650 - total flux cleaned = 0.045368 Jy ! Component: 1700 - total flux cleaned = 0.046108 Jy ! Component: 1750 - total flux cleaned = 0.0468404 Jy ! Component: 1800 - total flux cleaned = 0.0475643 Jy ! Component: 1850 - total flux cleaned = 0.0483505 Jy ! Component: 1900 - total flux cleaned = 0.048916 Jy ! Component: 1950 - total flux cleaned = 0.0495453 Jy ! Component: 2000 - total flux cleaned = 0.0499603 Jy ! Component: 2050 - total flux cleaned = 0.0506474 Jy ! Component: 2100 - total flux cleaned = 0.0513258 Jy ! Component: 2150 - total flux cleaned = 0.051863 Jy ! Component: 2200 - total flux cleaned = 0.052329 Jy ! Component: 2250 - total flux cleaned = 0.0528561 Jy ! Component: 2300 - total flux cleaned = 0.0534431 Jy ! Component: 2350 - total flux cleaned = 0.0538953 Jy ! Component: 2400 - total flux cleaned = 0.0544074 Jy ! Component: 2450 - total flux cleaned = 0.0547873 Jy ! Component: 2500 - total flux cleaned = 0.0552269 Jy ! Component: 2550 - total flux cleaned = 0.0554763 Jy ! Component: 2600 - total flux cleaned = 0.0559702 Jy ! Component: 2650 - total flux cleaned = 0.0563368 Jy ! Component: 2700 - total flux cleaned = 0.0566999 Jy ! Component: 2750 - total flux cleaned = 0.0571214 Jy ! Component: 2800 - total flux cleaned = 0.0574194 Jy ! Component: 2850 - total flux cleaned = 0.057774 Jy ! Component: 2900 - total flux cleaned = 0.0581255 Jy ! Component: 2950 - total flux cleaned = 0.0584747 Jy ! Component: 3000 - total flux cleaned = 0.0587636 Jy ! Component: 3050 - total flux cleaned = 0.059164 Jy ! Component: 3100 - total flux cleaned = 0.0595606 Jy ! Component: 3150 - total flux cleaned = 0.0596731 Jy ! Component: 3200 - total flux cleaned = 0.0600086 Jy ! Component: 3250 - total flux cleaned = 0.0602306 Jy ! Component: 3300 - total flux cleaned = 0.06067 Jy ! Component: 3350 - total flux cleaned = 0.0609971 Jy ! Component: 3400 - total flux cleaned = 0.0612675 Jy ! Component: 3450 - total flux cleaned = 0.0614817 Jy ! Component: 3500 - total flux cleaned = 0.061748 Jy ! Component: 3550 - total flux cleaned = 0.062065 Jy ! Component: 3600 - total flux cleaned = 0.0623796 Jy ! Component: 3650 - total flux cleaned = 0.0623796 Jy ! Component: 3700 - total flux cleaned = 0.062794 Jy ! Component: 3750 - total flux cleaned = 0.0630507 Jy ! Component: 3800 - total flux cleaned = 0.0632035 Jy ! Component: 3850 - total flux cleaned = 0.0635066 Jy ! Component: 3900 - total flux cleaned = 0.0636066 Jy ! Component: 3950 - total flux cleaned = 0.0638062 Jy ! Component: 4000 - total flux cleaned = 0.0638059 Jy ! Component: 4050 - total flux cleaned = 0.0641498 Jy ! Total flux subtracted in 4096 components = 0.0641497 Jy ! Clean residual min=-0.002525 max=0.003432 Jy/beam ! Clean residual mean=0.000062 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 1.82539 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 765 components and 1.82539 Jy wmap "J1230+1223_X_2003_06_18_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7143 x 1.992 at -2.328 degrees (North through East) ! Clean map min=-0.0049562 max=0.71216 Jy/beam ! Writing clean map to FITS file: J1230+1223_X_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.712164 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00101239 device "J1230+1223_X_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J1230+1223_X_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.426471 0.426471 0.852942 1.70588 3.41177 6.82354 13.6471 27.2941 54.5883 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.712 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7143 x 1.992 at -2.328 degrees (North through East) ! Clean map min=-0.0049562 max=0.71216 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1230+1223_X_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J1230+1223_X_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1230+1223_X_2003_06_18_pus_uvs.log closed on Thu Jan 18 21:38:32 2007