! Started logfile: J0433+0521_X_2003_06_18_pus_uvs.log on Thu Jan 18 15:58:22 2007 obs J0433+0521_X_2003_06_18_pus_uva.fits ! Reading UV FITS file: J0433+0521_X_2003_06_18_pus_uva.fits ! AN table 1: 84 integrations on 153 of 153 possible baselines. ! AN table 2: 201 integrations on 153 of 153 possible baselines. ! AN table 3: 240 integrations on 153 of 153 possible baselines. ! AN table 4: 160 integrations on 153 of 153 possible baselines. ! AN table 5: 138 integrations on 153 of 153 possible baselines. ! AN table 6: 36 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0715226 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0433+0521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2235 lines of history. ! ! Reading 37600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.160x0.160 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1413 telescope corrections were flagged in sub-array 1. ! A total of 2955 telescope corrections were flagged in sub-array 2. ! A total of 3831 telescope corrections were flagged in sub-array 3. ! A total of 2273 telescope corrections were flagged in sub-array 4. ! A total of 1926 telescope corrections were flagged in sub-array 5. ! A total of 648 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 1338 telescope corrections were flagged in sub-array 1. ! A total of 2928 telescope corrections were flagged in sub-array 2. ! A total of 3703 telescope corrections were flagged in sub-array 3. ! A total of 2228 telescope corrections were flagged in sub-array 4. ! A total of 1749 telescope corrections were flagged in sub-array 5. ! A total of 648 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 1338 telescope corrections were flagged in sub-array 1. ! A total of 2928 telescope corrections were flagged in sub-array 2. ! A total of 3703 telescope corrections were flagged in sub-array 3. ! A total of 2243 telescope corrections were flagged in sub-array 4. ! A total of 1749 telescope corrections were flagged in sub-array 5. ! A total of 648 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 1413 telescope corrections were flagged in sub-array 1. ! A total of 2928 telescope corrections were flagged in sub-array 2. ! A total of 3706 telescope corrections were flagged in sub-array 3. ! A total of 2243 telescope corrections were flagged in sub-array 4. ! A total of 1761 telescope corrections were flagged in sub-array 5. ! A total of 648 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.087611Jy sigma=0.012095 ! Fit after self-cal, rms=0.691623Jy sigma=0.006673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5891 mas, bmaj=0.9766 mas, bpa=-1.713 degrees ! Estimated noise=716.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.513029 Jy ! Component: 100 - total flux cleaned = 0.711148 Jy ! Total flux subtracted in 100 components = 0.711148 Jy ! Clean residual min=-0.052000 max=0.186081 Jy/beam ! Clean residual mean=0.000621 rms=0.017876 Jy/beam ! Combined flux in latest and established models = 0.711148 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.711148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.576382Jy sigma=0.005803 ! Fit after self-cal, rms=0.573918Jy sigma=0.005794 ! Inverting map ! Added new window around map position (-6.56, -3.68). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174696 Jy ! Component: 100 - total flux cleaned = 0.281228 Jy ! Total flux subtracted in 100 components = 0.281228 Jy ! Clean residual min=-0.043890 max=0.083719 Jy/beam ! Clean residual mean=0.000526 rms=0.012543 Jy/beam ! Combined flux in latest and established models = 0.992376 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.992376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505851Jy sigma=0.004473 ! Fit after self-cal, rms=0.499255Jy sigma=0.004401 ! Inverting map ! Added new window around map position (-1.6, -0.96). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977854 Jy ! Component: 100 - total flux cleaned = 0.170798 Jy ! Total flux subtracted in 100 components = 0.170798 Jy ! Clean residual min=-0.037560 max=0.068500 Jy/beam ! Clean residual mean=0.000457 rms=0.010073 Jy/beam ! Combined flux in latest and established models = 1.16317 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 1.16317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469267Jy sigma=0.003750 ! Fit after self-cal, rms=0.467581Jy sigma=0.003732 ! Inverting map ! Added new window around map position (-4.64, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734741 Jy ! Component: 100 - total flux cleaned = 0.130947 Jy ! Total flux subtracted in 100 components = 0.130947 Jy ! Clean residual min=-0.033844 max=0.048255 Jy/beam ! Clean residual mean=0.000403 rms=0.008457 Jy/beam ! Combined flux in latest and established models = 1.29412 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 1.29412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448434Jy sigma=0.003288 ! Fit after self-cal, rms=0.447285Jy sigma=0.003276 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7285 mas, bmaj=1.273 mas, bpa=-3.017 degrees ! Estimated noise=356.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088467 Jy ! Component: 100 - total flux cleaned = 0.155629 Jy ! Component: 150 - total flux cleaned = 0.207653 Jy ! Component: 200 - total flux cleaned = 0.248542 Jy ! Total flux subtracted in 200 components = 0.248542 Jy ! Clean residual min=-0.028413 max=0.052011 Jy/beam ! Clean residual mean=0.002915 rms=0.009913 Jy/beam ! Combined flux in latest and established models = 1.54266 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 80 components and 1.54266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425792Jy sigma=0.002699 ! Fit after self-cal, rms=0.424700Jy sigma=0.002679 ! Inverting map ! Added new window around map position (-3.2, -1.92). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499945 Jy ! Component: 100 - total flux cleaned = 0.0791542 Jy ! Component: 150 - total flux cleaned = 0.10141 Jy ! Component: 200 - total flux cleaned = 0.118779 Jy ! Total flux subtracted in 200 components = 0.118779 Jy ! Clean residual min=-0.025478 max=0.048280 Jy/beam ! Clean residual mean=0.002146 rms=0.008637 Jy/beam ! Combined flux in latest and established models = 1.66144 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 110 components and 1.66144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419097Jy sigma=0.002506 ! Fit after self-cal, rms=0.418604Jy sigma=0.002496 ! Inverting map ! Added new window around map position (-10.56, -3.04). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520713 Jy ! Component: 100 - total flux cleaned = 0.0823099 Jy ! Component: 150 - total flux cleaned = 0.103499 Jy ! Component: 200 - total flux cleaned = 0.120512 Jy ! Total flux subtracted in 200 components = 0.120512 Jy ! Clean residual min=-0.022681 max=0.034625 Jy/beam ! Clean residual mean=0.001447 rms=0.006221 Jy/beam ! Combined flux in latest and established models = 1.78195 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 163 components and 1.78195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413144Jy sigma=0.002297 ! Fit after self-cal, rms=0.412479Jy sigma=0.002285 ! Inverting map ! Added new window around map position (-7.68, -3.52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331677 Jy ! Component: 100 - total flux cleaned = 0.0508366 Jy ! Component: 150 - total flux cleaned = 0.0649969 Jy ! Component: 200 - total flux cleaned = 0.0760307 Jy ! Total flux subtracted in 200 components = 0.0760307 Jy ! Clean residual min=-0.020716 max=0.027255 Jy/beam ! Clean residual mean=0.001018 rms=0.005320 Jy/beam ! Combined flux in latest and established models = 1.85798 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 196 components and 1.85798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410166Jy sigma=0.002200 ! Fit after self-cal, rms=0.409931Jy sigma=0.002193 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.94 GG 1.00* HN 1.03 ! KK 1.00* KP 0.99 LA 0.98 MA 1.00* ! MK 1.00* NL 1.09 ON 1.00* OV 0.96 ! PT 0.98 SC 1.02 TC 1.02 TS 1.00* ! WF 1.00 WZ 1.00* ! ! A total of 240 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 0.97 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* ON 0.98 OV 1.00* ! PT 1.00* SC 0.98 TC 0.91 TS 1.00* ! WF 0.92 WZ 1.04 ! ! A total of 207 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 FD 0.93 GG 1.00* HN 0.99 ! KK 1.00* KP 0.98 LA 0.90 MA 1.00* ! MK 1.15 NL 1.02 ON 1.00* OV 0.95 ! PT 0.96 SC 1.04 TC 0.96 TS 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.03 GG 1.00* HN 0.96 ! KK 1.00* KP 1.11 LA 1.13 MA 1.00* ! MK 1.00* NL 1.13 ON 1.03 OV 1.00* ! PT 1.09 SC 0.98 TC 1.11 TS 1.00* ! WF 0.93 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.94 GG 1.00* HN 1.02 ! KK 1.00* KP 0.95 LA 0.98 MA 1.00* ! MK 1.00* NL 1.05 ON 1.00* OV 0.95 ! PT 1.02 SC 0.98 TC 1.13 TS 1.00* ! WF 1.00 WZ 1.00* ! ! A total of 300 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00 ! KK 1.00* KP 1.00* LA 1.00* MA 1.04 ! MK 1.00* NL 1.00* ON 0.95 OV 1.00* ! PT 1.00* SC 0.89 TC 1.02 TS 1.00* ! WF 0.97 WZ 0.99 ! ! A total of 252 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.92 GG 1.00* HN 0.99 ! KK 1.00* KP 0.93 LA 0.89 MA 1.00* ! MK 1.13 NL 0.98 ON 1.00* OV 0.95 ! PT 1.01 SC 0.99 TC 1.06 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 108 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.01 GG 1.00* HN 0.97 ! KK 1.00* KP 1.07 LA 1.14 MA 1.00 ! MK 1.00* NL 1.08 ON 0.99 OV 1.00* ! PT 1.13 SC 0.94 TC 1.23 TS 1.00* ! WF 0.96 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.93 GG 1.00* HN 0.99 ! KK 1.00* KP 0.99 LA 1.00 MA 1.00* ! MK 1.00* NL 1.01 ON 1.00* OV 0.99 ! PT 1.03 SC 0.98 TC 1.16 TS 1.00* ! WF 0.97 WZ 1.00* ! ! A total of 300 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 0.95 ! KK 1.00* KP 1.00* LA 1.00* MA 1.10 ! MK 1.00* NL 1.00* ON 1.01 OV 1.00* ! PT 1.00* SC 0.93 TC 0.87 TS 1.00* ! WF 0.93 WZ 1.00 ! ! A total of 237 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.92 GG 1.00* HN 0.99 ! KK 1.00* KP 0.97 LA 0.90 MA 1.00* ! MK 1.10 NL 0.97 ON 1.00* OV 0.97 ! PT 1.04 SC 0.99 TC 0.99 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 108 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.02 GG 1.00* HN 0.95 ! KK 1.00* KP 1.12 LA 1.14 MA 1.10 ! MK 1.00* NL 1.04 ON 1.10 OV 1.00* ! PT 1.15 SC 0.96 TC 1.07 TS 1.00* ! WF 0.93 WZ 0.85 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 99 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.92 GG 1.00* HN 1.00 ! KK 1.00* KP 0.95 LA 0.96 MA 1.00* ! MK 1.00* NL 1.01 ON 1.00* OV 0.97 ! PT 1.04 SC 1.04 TC 1.05 TS 1.00* ! WF 0.97 WZ 1.00* ! ! A total of 297 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 0.99 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00 ! MK 1.00* NL 1.00* ON 0.98 OV 1.00* ! PT 1.00* SC 0.97 TC 0.96 TS 1.00* ! WF 0.89 WZ 1.03 ! ! A total of 237 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.92 GG 1.00* HN 1.02 ! KK 1.00* KP 0.91 LA 0.88 MA 1.00* ! MK 1.10 NL 0.96 ON 1.00* OV 0.98 ! PT 1.06 SC 1.04 TC 1.00 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 108 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00 GG 1.00* HN 0.98 ! KK 1.00* KP 1.06 LA 1.11 MA 1.21 ! MK 1.00* NL 1.06 ON 1.16 OV 1.00* ! PT 1.18 SC 1.00 TC 1.03 TS 1.00* ! WF 0.91 WZ 0.79 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.409931Jy sigma=0.002193 ! Fit after self-cal, rms=0.420935Jy sigma=0.001941 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7625 mas, bmaj=1.337 mas, bpa=-4.644 degrees ! Estimated noise=355.537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.8, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207263 Jy ! Component: 100 - total flux cleaned = 0.0332894 Jy ! Component: 150 - total flux cleaned = 0.0416248 Jy ! Component: 200 - total flux cleaned = 0.0464422 Jy ! Total flux subtracted in 200 components = 0.0464422 Jy ! Clean residual min=-0.006646 max=0.013639 Jy/beam ! Clean residual mean=0.000428 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 1.90443 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 234 components and 1.90443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419839Jy sigma=0.001900 ! Fit after self-cal, rms=0.419914Jy sigma=0.001896 ! Inverting map ! Added new window around map position (-5.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122245 Jy ! Component: 100 - total flux cleaned = 0.0151329 Jy ! Component: 150 - total flux cleaned = 0.0168335 Jy ! Component: 200 - total flux cleaned = 0.0181172 Jy ! Total flux subtracted in 200 components = 0.0181172 Jy ! Clean residual min=-0.005742 max=0.007564 Jy/beam ! Clean residual mean=0.000331 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 1.92254 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 254 components and 1.92254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419344Jy sigma=0.001879 ! Fit after self-cal, rms=0.419317Jy sigma=0.001878 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419317Jy sigma=0.001878 ! Fit after self-cal, rms=0.418215Jy sigma=0.001874 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7621 mas, bmaj=1.338 mas, bpa=-4.688 degrees ! Estimated noise=355.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00878593 Jy ! Component: 100 - total flux cleaned = 0.014864 Jy ! Component: 150 - total flux cleaned = 0.0167016 Jy ! Component: 200 - total flux cleaned = 0.0181928 Jy ! Total flux subtracted in 200 components = 0.0181928 Jy ! Clean residual min=-0.005848 max=0.006947 Jy/beam ! Clean residual mean=0.000354 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 1.94074 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 268 components and 1.94074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417886Jy sigma=0.001864 ! Fit after self-cal, rms=0.417907Jy sigma=0.001864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298078 Jy ! Component: 100 - total flux cleaned = 0.00418339 Jy ! Component: 150 - total flux cleaned = 0.0053201 Jy ! Component: 200 - total flux cleaned = 0.00656443 Jy ! Total flux subtracted in 200 components = 0.00656443 Jy ! Clean residual min=-0.005838 max=0.006136 Jy/beam ! Clean residual mean=0.000319 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 1.9473 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 279 components and 1.9473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417710Jy sigma=0.001859 ! Fit after self-cal, rms=0.417735Jy sigma=0.001859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417735Jy sigma=0.001859 ! Fit after self-cal, rms=0.416612Jy sigma=0.001858 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7621 mas, bmaj=1.337 mas, bpa=-4.693 degrees ! Estimated noise=355.706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054088 Jy ! Component: 100 - total flux cleaned = 0.00819696 Jy ! Component: 150 - total flux cleaned = 0.00940172 Jy ! Component: 200 - total flux cleaned = 0.0102146 Jy ! Total flux subtracted in 200 components = 0.0102146 Jy ! Clean residual min=-0.005908 max=0.006034 Jy/beam ! Clean residual mean=0.000312 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 1.95752 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 287 components and 1.95752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416435Jy sigma=0.001853 ! Fit after self-cal, rms=0.416466Jy sigma=0.001853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169538 Jy ! Component: 100 - total flux cleaned = 0.00232298 Jy ! Component: 150 - total flux cleaned = 0.00307754 Jy ! Component: 200 - total flux cleaned = 0.00350796 Jy ! Total flux subtracted in 200 components = 0.00350796 Jy ! Clean residual min=-0.005739 max=0.005641 Jy/beam ! Clean residual mean=0.000294 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 1.96102 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 293 components and 1.96102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416332Jy sigma=0.001850 ! Fit after self-cal, rms=0.416354Jy sigma=0.001850 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 90 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416354Jy sigma=0.001850 ! Fit after self-cal, rms=0.416359Jy sigma=0.001850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.824 mas, bmaj=2.747 mas, bpa=-0.6059 degrees ! Estimated noise=387.325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581495 Jy ! Component: 100 - total flux cleaned = 0.00985509 Jy ! Component: 150 - total flux cleaned = 0.0114064 Jy ! Component: 200 - total flux cleaned = 0.0123025 Jy ! Total flux subtracted in 200 components = 0.0123025 Jy ! Clean residual min=-0.003989 max=0.005806 Jy/beam ! Clean residual mean=0.000486 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 1.97333 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 309 components and 1.97333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416352Jy sigma=0.001848 ! Fit after self-cal, rms=0.416348Jy sigma=0.001847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230171 Jy ! Component: 100 - total flux cleaned = 0.00251751 Jy ! Component: 150 - total flux cleaned = 0.00271666 Jy ! Component: 200 - total flux cleaned = 0.00280917 Jy ! Total flux subtracted in 200 components = 0.00280917 Jy ! Clean residual min=-0.003561 max=0.005403 Jy/beam ! Clean residual mean=0.000457 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 1.97614 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 319 components and 1.97614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416344Jy sigma=0.001846 ! Fit after self-cal, rms=0.416353Jy sigma=0.001846 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7618 mas, bmaj=1.336 mas, bpa=-4.696 degrees ! Estimated noise=355.618 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7618 x 1.336 at -4.696 degrees (North through East) ! Clean map min=-0.0045881 max=0.67114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416353Jy sigma=0.001846 ! Fit after self-cal, rms=0.645515Jy sigma=0.001699 ! Inverting map and beam ! Estimated beam: bmin=0.7588 mas, bmaj=1.335 mas, bpa=-4.861 degrees ! Estimated noise=355.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202837 Jy ! Component: 100 - total flux cleaned = 0.00261388 Jy ! Component: 150 - total flux cleaned = 0.00288257 Jy ! Component: 200 - total flux cleaned = 0.00314026 Jy ! Total flux subtracted in 200 components = 0.00314026 Jy ! Clean residual min=-0.004968 max=0.005230 Jy/beam ! Clean residual mean=0.000203 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 1.97928 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 328 components and 1.97928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.645418Jy sigma=0.001697 ! Fit after self-cal, rms=0.645455Jy sigma=0.001697 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661849 Jy ! Component: 100 - total flux cleaned = 0.000908969 Jy ! Component: 150 - total flux cleaned = 0.00103034 Jy ! Component: 200 - total flux cleaned = 0.00125799 Jy ! Total flux subtracted in 200 components = 0.00125799 Jy ! Clean residual min=-0.004833 max=0.005135 Jy/beam ! Clean residual mean=0.000196 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.98053 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 331 components and 1.98053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.645373Jy sigma=0.001695 ! Fit after self-cal, rms=0.645392Jy sigma=0.001695 ! Inverting map ! Added new window around map position (-2.4, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331254 Jy ! Component: 100 - total flux cleaned = 0.00367272 Jy ! Component: 150 - total flux cleaned = 0.00401781 Jy ! Component: 200 - total flux cleaned = 0.00412887 Jy ! Total flux subtracted in 200 components = 0.00412887 Jy ! Clean residual min=-0.004464 max=0.004670 Jy/beam ! Clean residual mean=0.000171 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 1.98466 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 339 components and 1.98466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.645294Jy sigma=0.001693 ! Fit after self-cal, rms=0.645287Jy sigma=0.001693 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.645287Jy sigma=0.001693 ! Fit after self-cal, rms=0.649984Jy sigma=0.001692 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6126 mas, bmaj=1.003 mas, bpa=-5.456 degrees ! Estimated noise=678.939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51986 Jy ! Component: 100 - total flux cleaned = 0.761412 Jy ! Component: 150 - total flux cleaned = 0.917275 Jy ! Component: 200 - total flux cleaned = 1.03144 Jy ! Total flux subtracted in 200 components = 1.03144 Jy ! Clean residual min=-0.033201 max=0.068854 Jy/beam ! Clean residual mean=0.000817 rms=0.011845 Jy/beam ! Combined flux in latest and established models = 1.03144 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.03144 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7582 mas, bmaj=1.336 mas, bpa=-4.88 degrees ! Estimated noise=355.041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154997 Jy ! Component: 100 - total flux cleaned = 0.273355 Jy ! Component: 150 - total flux cleaned = 0.365974 Jy ! Component: 200 - total flux cleaned = 0.441503 Jy ! Total flux subtracted in 200 components = 0.441503 Jy ! Clean residual min=-0.020387 max=0.047733 Jy/beam ! Clean residual mean=0.003161 rms=0.011128 Jy/beam ! Combined flux in latest and established models = 1.47294 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 94 components and 1.47294 Jy ! Inverting map ! Added new window around map position (-0.8, -0.48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637188 Jy ! Component: 100 - total flux cleaned = 0.117983 Jy ! Component: 150 - total flux cleaned = 0.164648 Jy ! Component: 200 - total flux cleaned = 0.205044 Jy ! Total flux subtracted in 200 components = 0.205044 Jy ! Clean residual min=-0.013655 max=0.026556 Jy/beam ! Clean residual mean=0.001953 rms=0.006529 Jy/beam ! Combined flux in latest and established models = 1.67798 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 147 components and 1.67798 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 90 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.823 mas, bmaj=2.745 mas, bpa=-0.5651 degrees ! Estimated noise=387.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0619058 Jy ! Component: 100 - total flux cleaned = 0.109849 Jy ! Component: 150 - total flux cleaned = 0.147718 Jy ! Component: 200 - total flux cleaned = 0.177961 Jy ! Total flux subtracted in 200 components = 0.177961 Jy ! Clean residual min=-0.008822 max=0.018038 Jy/beam ! Clean residual mean=0.001824 rms=0.004942 Jy/beam ! Combined flux in latest and established models = 1.85595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242646 Jy ! Component: 100 - total flux cleaned = 0.0438097 Jy ! Component: 150 - total flux cleaned = 0.0596157 Jy ! Component: 200 - total flux cleaned = 0.072454 Jy ! Total flux subtracted in 200 components = 0.072454 Jy ! Clean residual min=-0.004619 max=0.008987 Jy/beam ! Clean residual mean=0.000994 rms=0.002232 Jy/beam ! Combined flux in latest and established models = 1.9284 Jy ! Adding 214 model components to the UV plane model. ! The established model now contains 311 components and 1.9284 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7582 mas, bmaj=1.336 mas, bpa=-4.88 degrees ! Estimated noise=355.041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877999 Jy ! Component: 100 - total flux cleaned = 0.0159093 Jy ! Component: 150 - total flux cleaned = 0.0220274 Jy ! Component: 200 - total flux cleaned = 0.0273425 Jy ! Total flux subtracted in 200 components = 0.0273425 Jy ! Clean residual min=-0.004146 max=0.008400 Jy/beam ! Clean residual mean=0.000356 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 1.95574 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 342 components and 1.95574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.649641Jy sigma=0.001696 ! Fit after self-cal, rms=0.649136Jy sigma=0.001691 wmodel J0433+0521_X_2003_06_18_pus_map.mod ! Writing 342 model components to file: J0433+0521_X_2003_06_18_pus_map.mod wobs J0433+0521_X_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J0433+0521_X_2003_06_18_pus_uvs.fits wwins J0433+0521_X_2003_06_18_pus_map.win ! wwins: Wrote 11 windows to J0433+0521_X_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024159 Jy ! Component: 100 - total flux cleaned = 0.00448107 Jy ! Component: 150 - total flux cleaned = 0.00641989 Jy ! Component: 200 - total flux cleaned = 0.00827157 Jy ! Component: 250 - total flux cleaned = 0.0100586 Jy ! Component: 300 - total flux cleaned = 0.011789 Jy ! Component: 350 - total flux cleaned = 0.013468 Jy ! Component: 400 - total flux cleaned = 0.0151024 Jy ! Component: 450 - total flux cleaned = 0.0163174 Jy ! Component: 500 - total flux cleaned = 0.0175089 Jy ! Component: 550 - total flux cleaned = 0.018494 Jy ! Component: 600 - total flux cleaned = 0.0194025 Jy ! Component: 650 - total flux cleaned = 0.020415 Jy ! Component: 700 - total flux cleaned = 0.0212944 Jy ! Component: 750 - total flux cleaned = 0.0223334 Jy ! Component: 800 - total flux cleaned = 0.0230736 Jy ! Component: 850 - total flux cleaned = 0.0239725 Jy ! Component: 900 - total flux cleaned = 0.0246932 Jy ! Component: 950 - total flux cleaned = 0.0256234 Jy ! Component: 1000 - total flux cleaned = 0.0263789 Jy ! Component: 1050 - total flux cleaned = 0.0270715 Jy ! Component: 1100 - total flux cleaned = 0.0277558 Jy ! Component: 1150 - total flux cleaned = 0.0284317 Jy ! Component: 1200 - total flux cleaned = 0.0292021 Jy ! Component: 1250 - total flux cleaned = 0.0296588 Jy ! Component: 1300 - total flux cleaned = 0.0302621 Jy ! Component: 1350 - total flux cleaned = 0.0309079 Jy ! Component: 1400 - total flux cleaned = 0.0314975 Jy ! Component: 1450 - total flux cleaned = 0.0319834 Jy ! Component: 1500 - total flux cleaned = 0.0325611 Jy ! Component: 1550 - total flux cleaned = 0.0331324 Jy ! Component: 1600 - total flux cleaned = 0.0336507 Jy ! Component: 1650 - total flux cleaned = 0.0341176 Jy ! Component: 1700 - total flux cleaned = 0.0345343 Jy ! Component: 1750 - total flux cleaned = 0.0350387 Jy ! Component: 1800 - total flux cleaned = 0.035583 Jy ! Component: 1850 - total flux cleaned = 0.0359875 Jy ! Component: 1900 - total flux cleaned = 0.0364333 Jy ! Component: 1950 - total flux cleaned = 0.0368748 Jy ! Component: 2000 - total flux cleaned = 0.0372684 Jy ! Total flux subtracted in 2048 components = 0.0374857 Jy ! Clean residual min=-0.002256 max=0.002324 Jy/beam ! Clean residual mean=0.000140 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 1.99323 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 477 components and 1.99323 Jy wmap "J0433+0521_X_2003_06_18_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7582 x 1.336 at -4.88 degrees (North through East) ! Clean map min=-0.0028182 max=0.66782 Jy/beam ! Writing clean map to FITS file: J0433+0521_X_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.66782 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000789087 device "J0433+0521_X_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J0433+0521_X_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354476 0.354476 0.708952 1.4179 2.83581 5.67162 11.3432 22.6865 45.373 90.7459 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.667 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7582 x 1.336 at -4.88 degrees (North through East) ! Clean map min=-0.0028182 max=0.66782 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0433+0521_X_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J0433+0521_X_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0433+0521_X_2003_06_18_pus_uvs.log closed on Thu Jan 18 16:02:43 2007