! Started logfile: J0433+0521_S_2003_06_18_pus_uvs.log on Tue Jan 23 23:54:20 2007 obs J0433+0521_S_2003_06_18_pus_uva.fits ! Reading UV FITS file: J0433+0521_S_2003_06_18_pus_uva.fits ! AN table 1: 40 integrations on 153 of 153 possible baselines. ! AN table 2: 426 integrations on 153 of 153 possible baselines. ! AN table 3: 229 integrations on 153 of 153 possible baselines. ! AN table 4: 26 integrations on 153 of 153 possible baselines. ! AN table 5: 11 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.068931 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0433+0521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2425 lines of history. ! ! Reading 30880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 5994 telescope corrections were flagged in sub-array 2. ! A total of 3449 telescope corrections were flagged in sub-array 3. ! A total of 435 telescope corrections were flagged in sub-array 4. ! A total of 198 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 5994 telescope corrections were flagged in sub-array 2. ! A total of 3449 telescope corrections were flagged in sub-array 3. ! A total of 435 telescope corrections were flagged in sub-array 4. ! A total of 198 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 5994 telescope corrections were flagged in sub-array 2. ! A total of 3449 telescope corrections were flagged in sub-array 3. ! A total of 435 telescope corrections were flagged in sub-array 4. ! A total of 198 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 639 telescope corrections were flagged in sub-array 1. ! A total of 5994 telescope corrections were flagged in sub-array 2. ! A total of 3449 telescope corrections were flagged in sub-array 3. ! A total of 435 telescope corrections were flagged in sub-array 4. ! A total of 198 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.538760Jy sigma=0.016876 ! Fit after self-cal, rms=1.151116Jy sigma=0.012658 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=3.62 mas, bpa=11.17 degrees ! Estimated noise=721.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.865223 Jy ! Component: 100 - total flux cleaned = 1.26065 Jy ! Total flux subtracted in 100 components = 1.26065 Jy ! Clean residual min=-0.141237 max=0.480364 Jy/beam ! Clean residual mean=0.001369 rms=0.037812 Jy/beam ! Combined flux in latest and established models = 1.26065 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.26065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.021639Jy sigma=0.010998 ! Fit after self-cal, rms=1.017395Jy sigma=0.010977 ! Inverting map ! Added new window around map position (5.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438282 Jy ! Component: 100 - total flux cleaned = 0.659498 Jy ! Total flux subtracted in 100 components = 0.659498 Jy ! Clean residual min=-0.091137 max=0.324679 Jy/beam ! Clean residual mean=0.000825 rms=0.024702 Jy/beam ! Combined flux in latest and established models = 1.92015 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 1.92015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.781779Jy sigma=0.007767 ! Fit after self-cal, rms=0.750730Jy sigma=0.007400 ! Inverting map ! Added new window around map position (-5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261858 Jy ! Component: 100 - total flux cleaned = 0.426511 Jy ! Total flux subtracted in 100 components = 0.426511 Jy ! Clean residual min=-0.049370 max=0.091100 Jy/beam ! Clean residual mean=0.000481 rms=0.014593 Jy/beam ! Combined flux in latest and established models = 2.34666 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 2.34666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633419Jy sigma=0.005551 ! Fit after self-cal, rms=0.628707Jy sigma=0.005515 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125146 Jy ! Component: 100 - total flux cleaned = 0.214093 Jy ! Total flux subtracted in 100 components = 0.214093 Jy ! Clean residual min=-0.045093 max=0.053070 Jy/beam ! Clean residual mean=0.000301 rms=0.011516 Jy/beam ! Combined flux in latest and established models = 2.56075 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 2.56075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.595268Jy sigma=0.004897 ! Fit after self-cal, rms=0.594680Jy sigma=0.004890 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=4.48 mas, bpa=4.96 degrees ! Estimated noise=441.592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113244 Jy ! Component: 100 - total flux cleaned = 0.186414 Jy ! Component: 150 - total flux cleaned = 0.235688 Jy ! Component: 200 - total flux cleaned = 0.269365 Jy ! Total flux subtracted in 200 components = 0.269365 Jy ! Clean residual min=-0.047307 max=0.050567 Jy/beam ! Clean residual mean=0.001710 rms=0.013573 Jy/beam ! Combined flux in latest and established models = 2.83012 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 76 components and 2.83011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.576556Jy sigma=0.004482 ! Fit after self-cal, rms=0.575636Jy sigma=0.004474 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 336 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 GG 1.00* HN 0.88 ! KK 1.00* KP 0.99 LA 1.02 MA 1.00* ! MK 1.00* NL 1.10 ON 1.06 OV 1.08 ! PT 1.02 SC 0.96 TC 1.15 TS 1.00* ! WF 1.01 WZ 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.97 GG 1.00* HN 0.86 ! KK 1.00* KP 0.68 LA 0.94 MA 1.00* ! MK 1.07 NL 1.00 ON 1.00* OV 0.71 ! PT 0.91 SC 0.93 TC 1.16 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 336 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.00 GG 1.00* HN 0.98 ! KK 1.00* KP 1.07 LA 1.02 MA 1.00* ! MK 1.00* NL 1.07 ON 0.96 OV 0.97 ! PT 1.03 SC 0.96 TC 1.06 TS 1.00* ! WF 0.98 WZ 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.96 GG 1.00* HN 1.07 ! KK 1.00* KP 0.88 LA 0.95 MA 1.00* ! MK 1.13 NL 0.96 ON 1.00* OV 0.69 ! PT 0.92 SC 0.94 TC 1.02 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 336 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.01 GG 1.00* HN 1.01 ! KK 1.00* KP 1.06 LA 0.99 MA 1.00* ! MK 1.00* NL 1.07 ON 1.02 OV 1.06 ! PT 1.04 SC 1.14 TC 1.03 TS 1.00* ! WF 1.01 WZ 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 GG 1.00* HN 1.12 ! KK 1.00* KP 0.92 LA 0.92 MA 1.00* ! MK 1.07 NL 0.99 ON 1.00* OV 1.07 ! PT 0.94 SC 1.08 TC 1.04 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 336 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.02 GG 1.00* HN 0.82 ! KK 1.00* KP 1.07 LA 1.03 MA 1.00* ! MK 1.00* NL 1.10 ON 1.03 OV 1.02 ! PT 1.10 SC 1.20 TC 1.06 TS 1.00* ! WF 0.98 WZ 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.96 GG 1.00* HN 0.93 ! KK 1.00* KP 0.91 LA 0.96 MA 1.00* ! MK 1.00 NL 1.03 ON 1.00* OV 1.05 ! PT 0.98 SC 1.13 TC 1.07 TS 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MK 0.00* NL 0.00* ON 0.00* OV 0.00* ! PT 0.00* SC 0.00* TC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.575636Jy sigma=0.004474 ! Fit after self-cal, rms=0.495778Jy sigma=0.003380 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=4.824 mas, bpa=3.679 degrees ! Estimated noise=437.077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113295 Jy ! Component: 100 - total flux cleaned = 0.00972734 Jy ! Component: 150 - total flux cleaned = 0.00887179 Jy ! Component: 200 - total flux cleaned = 0.00949113 Jy ! Total flux subtracted in 200 components = 0.00949113 Jy ! Clean residual min=-0.033771 max=0.030030 Jy/beam ! Clean residual mean=0.000782 rms=0.008986 Jy/beam ! Combined flux in latest and established models = 2.83961 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 2.83961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494755Jy sigma=0.003356 ! Fit after self-cal, rms=0.495150Jy sigma=0.003353 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495150Jy sigma=0.003353 ! Fit after self-cal, rms=0.476873Jy sigma=0.003026 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=4.825 mas, bpa=4.194 degrees ! Estimated noise=436.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156307 Jy ! Component: 100 - total flux cleaned = 0.0233801 Jy ! Component: 150 - total flux cleaned = 0.0262699 Jy ! Component: 200 - total flux cleaned = 0.0274812 Jy ! Total flux subtracted in 200 components = 0.0274811 Jy ! Clean residual min=-0.013216 max=0.024238 Jy/beam ! Clean residual mean=0.000678 rms=0.004677 Jy/beam ! Combined flux in latest and established models = 2.86709 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 2.86709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476353Jy sigma=0.003014 ! Fit after self-cal, rms=0.476359Jy sigma=0.003012 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223178 Jy ! Component: 100 - total flux cleaned = 0.0302075 Jy ! Component: 150 - total flux cleaned = 0.0304969 Jy ! Component: 200 - total flux cleaned = 0.0307424 Jy ! Total flux subtracted in 200 components = 0.0307424 Jy ! Clean residual min=-0.012711 max=0.023872 Jy/beam ! Clean residual mean=0.000477 rms=0.004362 Jy/beam ! Combined flux in latest and established models = 2.89783 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 2.89783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475501Jy sigma=0.002985 ! Fit after self-cal, rms=0.475474Jy sigma=0.002982 ! Inverting map ! Added new window around map position (-74, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227025 Jy ! Component: 100 - total flux cleaned = 0.0350478 Jy ! Component: 150 - total flux cleaned = 0.0421386 Jy ! Component: 200 - total flux cleaned = 0.0466932 Jy ! Total flux subtracted in 200 components = 0.0466932 Jy ! Clean residual min=-0.011564 max=0.014532 Jy/beam ! Clean residual mean=0.000264 rms=0.003588 Jy/beam ! Combined flux in latest and established models = 2.94452 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 147 components and 2.94452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474381Jy sigma=0.002958 ! Fit after self-cal, rms=0.474458Jy sigma=0.002957 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474458Jy sigma=0.002957 ! Fit after self-cal, rms=0.471688Jy sigma=0.002938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=4.82 mas, bpa=4.281 degrees ! Estimated noise=435.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125011 Jy ! Component: 100 - total flux cleaned = 0.0218458 Jy ! Component: 150 - total flux cleaned = 0.0293493 Jy ! Component: 200 - total flux cleaned = 0.0354625 Jy ! Total flux subtracted in 200 components = 0.0354625 Jy ! Clean residual min=-0.010526 max=0.012814 Jy/beam ! Clean residual mean=0.000289 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 2.97999 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 2.97999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471093Jy sigma=0.002928 ! Fit after self-cal, rms=0.471066Jy sigma=0.002927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526272 Jy ! Component: 100 - total flux cleaned = 0.0094267 Jy ! Component: 150 - total flux cleaned = 0.0125853 Jy ! Component: 200 - total flux cleaned = 0.0143611 Jy ! Total flux subtracted in 200 components = 0.0143611 Jy ! Clean residual min=-0.010461 max=0.012396 Jy/beam ! Clean residual mean=0.000212 rms=0.002963 Jy/beam ! Combined flux in latest and established models = 2.99435 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 169 components and 2.99435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.470853Jy sigma=0.002924 ! Fit after self-cal, rms=0.470894Jy sigma=0.002924 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.470894Jy sigma=0.002924 ! Fit after self-cal, rms=0.468767Jy sigma=0.002922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.783 mas, bmaj=11.02 mas, bpa=-2.933 degrees ! Estimated noise=496.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012478 Jy ! Component: 100 - total flux cleaned = 0.0199839 Jy ! Component: 150 - total flux cleaned = 0.0255273 Jy ! Component: 200 - total flux cleaned = 0.029774 Jy ! Total flux subtracted in 200 components = 0.029774 Jy ! Clean residual min=-0.015825 max=0.020369 Jy/beam ! Clean residual mean=0.000500 rms=0.005030 Jy/beam ! Combined flux in latest and established models = 3.02412 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 192 components and 3.02412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468652Jy sigma=0.002920 ! Fit after self-cal, rms=0.468640Jy sigma=0.002919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478155 Jy ! Component: 100 - total flux cleaned = 0.00688469 Jy ! Component: 150 - total flux cleaned = 0.00877472 Jy ! Component: 200 - total flux cleaned = 0.0101041 Jy ! Total flux subtracted in 200 components = 0.0101041 Jy ! Clean residual min=-0.015729 max=0.020261 Jy/beam ! Clean residual mean=0.000384 rms=0.004901 Jy/beam ! Combined flux in latest and established models = 3.03422 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 3.03422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468638Jy sigma=0.002919 ! Fit after self-cal, rms=0.468640Jy sigma=0.002919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=4.812 mas, bpa=4.215 degrees ! Estimated noise=435.963 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.445 x 4.812 at 4.215 degrees (North through East) ! Clean map min=-0.009834 max=1.0338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468640Jy sigma=0.002919 ! Fit after self-cal, rms=0.967668Jy sigma=0.001988 ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=4.807 mas, bpa=4.021 degrees ! Estimated noise=434.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023775 Jy ! Component: 100 - total flux cleaned = 0.00383573 Jy ! Component: 150 - total flux cleaned = 0.00353529 Jy ! Component: 200 - total flux cleaned = 0.00353962 Jy ! Total flux subtracted in 200 components = 0.00353962 Jy ! Clean residual min=-0.009381 max=0.011056 Jy/beam ! Clean residual mean=0.000201 rms=0.002428 Jy/beam ! Combined flux in latest and established models = 3.03776 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 215 components and 3.03776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.967509Jy sigma=0.001985 ! Fit after self-cal, rms=0.967454Jy sigma=0.001985 ! Inverting map ! Added new window around map position (-87.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111599 Jy ! Component: 100 - total flux cleaned = 0.0179332 Jy ! Component: 150 - total flux cleaned = 0.0218189 Jy ! Component: 200 - total flux cleaned = 0.0233282 Jy ! Total flux subtracted in 200 components = 0.0233282 Jy ! Clean residual min=-0.009619 max=0.010647 Jy/beam ! Clean residual mean=0.000098 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 3.06109 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 239 components and 3.06109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.967248Jy sigma=0.001977 ! Fit after self-cal, rms=0.967443Jy sigma=0.001976 ! Inverting map ! Added new window around map position (-26, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108473 Jy ! Component: 100 - total flux cleaned = 0.0175601 Jy ! Component: 150 - total flux cleaned = 0.0225432 Jy ! Component: 200 - total flux cleaned = 0.0257252 Jy ! Total flux subtracted in 200 components = 0.0257252 Jy ! Clean residual min=-0.007952 max=0.008389 Jy/beam ! Clean residual mean=-0.000039 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 3.08682 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 261 components and 3.08682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.967199Jy sigma=0.001968 ! Fit after self-cal, rms=0.967099Jy sigma=0.001967 ! Inverting map ! Added new window around map position (-36.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792699 Jy ! Component: 100 - total flux cleaned = 0.0124904 Jy ! Component: 150 - total flux cleaned = 0.0150311 Jy ! Component: 200 - total flux cleaned = 0.0164927 Jy ! Total flux subtracted in 200 components = 0.0164927 Jy ! Clean residual min=-0.007512 max=0.006889 Jy/beam ! Clean residual mean=-0.000130 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 3.10331 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 284 components and 3.10331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.966973Jy sigma=0.001963 ! Fit after self-cal, rms=0.966925Jy sigma=0.001962 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.966925Jy sigma=0.001962 ! Fit after self-cal, rms=1.311364Jy sigma=0.001960 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=3.742 mas, bpa=9.593 degrees ! Estimated noise=717.762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.906539 Jy ! Component: 100 - total flux cleaned = 1.41148 Jy ! Component: 150 - total flux cleaned = 1.7537 Jy ! Component: 200 - total flux cleaned = 2.00231 Jy ! Total flux subtracted in 200 components = 2.00231 Jy ! Clean residual min=-0.064149 max=0.141756 Jy/beam ! Clean residual mean=0.000834 rms=0.017612 Jy/beam ! Combined flux in latest and established models = 2.00231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 2.00231 Jy ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=4.81 mas, bpa=3.981 degrees ! Estimated noise=434.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.302673 Jy ! Component: 100 - total flux cleaned = 0.495749 Jy ! Component: 150 - total flux cleaned = 0.623685 Jy ! Component: 200 - total flux cleaned = 0.709891 Jy ! Total flux subtracted in 200 components = 0.709891 Jy ! Clean residual min=-0.018184 max=0.047239 Jy/beam ! Clean residual mean=0.002283 rms=0.007838 Jy/beam ! Combined flux in latest and established models = 2.7122 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 75 components and 2.7122 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059814 Jy ! Component: 100 - total flux cleaned = 0.103778 Jy ! Component: 150 - total flux cleaned = 0.138344 Jy ! Component: 200 - total flux cleaned = 0.166457 Jy ! Total flux subtracted in 200 components = 0.166457 Jy ! Clean residual min=-0.011682 max=0.022475 Jy/beam ! Clean residual mean=0.001311 rms=0.004066 Jy/beam ! Combined flux in latest and established models = 2.87866 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 127 components and 2.87866 Jy ! Inverting map ! Added new window around map position (-16.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248986 Jy ! Component: 100 - total flux cleaned = 0.045394 Jy ! Component: 150 - total flux cleaned = 0.0632139 Jy ! Component: 200 - total flux cleaned = 0.0789267 Jy ! Total flux subtracted in 200 components = 0.0789267 Jy ! Clean residual min=-0.008845 max=0.010668 Jy/beam ! Clean residual mean=0.000889 rms=0.002789 Jy/beam ! Combined flux in latest and established models = 2.95759 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 170 components and 2.95759 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.767 mas, bmaj=11.02 mas, bpa=-3.231 degrees ! Estimated noise=495.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252813 Jy ! Component: 100 - total flux cleaned = 0.0453936 Jy ! Component: 150 - total flux cleaned = 0.061975 Jy ! Component: 200 - total flux cleaned = 0.0759104 Jy ! Total flux subtracted in 200 components = 0.0759104 Jy ! Clean residual min=-0.010072 max=0.010116 Jy/beam ! Clean residual mean=0.001052 rms=0.003398 Jy/beam ! Combined flux in latest and established models = 3.0335 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119196 Jy ! Component: 100 - total flux cleaned = 0.0222268 Jy ! Component: 150 - total flux cleaned = 0.03122 Jy ! Component: 200 - total flux cleaned = 0.0390936 Jy ! Total flux subtracted in 200 components = 0.0390936 Jy ! Clean residual min=-0.008108 max=0.008940 Jy/beam ! Clean residual mean=0.000623 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 3.07259 Jy ! Adding 210 model components to the UV plane model. ! The established model now contains 365 components and 3.07259 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=4.81 mas, bpa=3.981 degrees ! Estimated noise=434.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053482 Jy ! Component: 100 - total flux cleaned = 0.00985609 Jy ! Component: 150 - total flux cleaned = 0.0138801 Jy ! Component: 200 - total flux cleaned = 0.0175365 Jy ! Total flux subtracted in 200 components = 0.0175365 Jy ! Clean residual min=-0.005254 max=0.006683 Jy/beam ! Clean residual mean=0.000202 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 3.09013 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 391 components and 3.09013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.310914Jy sigma=0.001955 ! Fit after self-cal, rms=1.310978Jy sigma=0.001952 wmodel J0433+0521_S_2003_06_18_pus_map.mod ! Writing 391 model components to file: J0433+0521_S_2003_06_18_pus_map.mod wobs J0433+0521_S_2003_06_18_pus_uvs.fits ! Writing UV FITS file: J0433+0521_S_2003_06_18_pus_uvs.fits wwins J0433+0521_S_2003_06_18_pus_map.win ! wwins: Wrote 9 windows to J0433+0521_S_2003_06_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288313 Jy ! Component: 100 - total flux cleaned = 0.00522263 Jy ! Component: 150 - total flux cleaned = 0.00685295 Jy ! Component: 200 - total flux cleaned = 0.00758815 Jy ! Component: 250 - total flux cleaned = 0.00830208 Jy ! Component: 300 - total flux cleaned = 0.00890877 Jy ! Component: 350 - total flux cleaned = 0.00941626 Jy ! Component: 400 - total flux cleaned = 0.00991419 Jy ! Component: 450 - total flux cleaned = 0.0105652 Jy ! Component: 500 - total flux cleaned = 0.0110441 Jy ! Component: 550 - total flux cleaned = 0.011515 Jy ! Component: 600 - total flux cleaned = 0.0119777 Jy ! Component: 650 - total flux cleaned = 0.0121297 Jy ! Component: 700 - total flux cleaned = 0.0124286 Jy ! Component: 750 - total flux cleaned = 0.0128705 Jy ! Component: 800 - total flux cleaned = 0.0130155 Jy ! Component: 850 - total flux cleaned = 0.0134438 Jy ! Component: 900 - total flux cleaned = 0.013726 Jy ! Component: 950 - total flux cleaned = 0.0141425 Jy ! Component: 1000 - total flux cleaned = 0.0144849 Jy ! Component: 1050 - total flux cleaned = 0.0147554 Jy ! Component: 1100 - total flux cleaned = 0.0150896 Jy ! Component: 1150 - total flux cleaned = 0.0154854 Jy ! Component: 1200 - total flux cleaned = 0.0157466 Jy ! Component: 1250 - total flux cleaned = 0.0162624 Jy ! Component: 1300 - total flux cleaned = 0.0165175 Jy ! Component: 1350 - total flux cleaned = 0.0171475 Jy ! Component: 1400 - total flux cleaned = 0.0173344 Jy ! Component: 1450 - total flux cleaned = 0.0178285 Jy ! Component: 1500 - total flux cleaned = 0.0181337 Jy ! Component: 1550 - total flux cleaned = 0.0184969 Jy ! Component: 1600 - total flux cleaned = 0.0189153 Jy ! Component: 1650 - total flux cleaned = 0.0192109 Jy ! Component: 1700 - total flux cleaned = 0.0195044 Jy ! Component: 1750 - total flux cleaned = 0.0199104 Jy ! Component: 1800 - total flux cleaned = 0.0203693 Jy ! Component: 1850 - total flux cleaned = 0.0207102 Jy ! Component: 1900 - total flux cleaned = 0.0209349 Jy ! Component: 1950 - total flux cleaned = 0.0213809 Jy ! Component: 2000 - total flux cleaned = 0.0217123 Jy ! Component: 2050 - total flux cleaned = 0.0218769 Jy ! Component: 2100 - total flux cleaned = 0.0222029 Jy ! Component: 2150 - total flux cleaned = 0.0224188 Jy ! Component: 2200 - total flux cleaned = 0.0228985 Jy ! Component: 2250 - total flux cleaned = 0.0232156 Jy ! Component: 2300 - total flux cleaned = 0.0234779 Jy ! Component: 2350 - total flux cleaned = 0.0237899 Jy ! Component: 2400 - total flux cleaned = 0.0242025 Jy ! Component: 2450 - total flux cleaned = 0.0245603 Jy ! Component: 2500 - total flux cleaned = 0.0248641 Jy ! Component: 2550 - total flux cleaned = 0.0251663 Jy ! Component: 2600 - total flux cleaned = 0.0254659 Jy ! Component: 2650 - total flux cleaned = 0.0255652 Jy ! Component: 2700 - total flux cleaned = 0.0259099 Jy ! Component: 2750 - total flux cleaned = 0.0263492 Jy ! Component: 2800 - total flux cleaned = 0.0265429 Jy ! Component: 2850 - total flux cleaned = 0.0267831 Jy ! Component: 2900 - total flux cleaned = 0.0270695 Jy ! Component: 2950 - total flux cleaned = 0.0271642 Jy ! Component: 3000 - total flux cleaned = 0.0273994 Jy ! Component: 3050 - total flux cleaned = 0.0276335 Jy ! Component: 3100 - total flux cleaned = 0.0278663 Jy ! Component: 3150 - total flux cleaned = 0.0279586 Jy ! Component: 3200 - total flux cleaned = 0.02828 Jy ! Component: 3250 - total flux cleaned = 0.0285993 Jy ! Component: 3300 - total flux cleaned = 0.0286901 Jy ! Component: 3350 - total flux cleaned = 0.0288252 Jy ! Component: 3400 - total flux cleaned = 0.0291833 Jy ! Component: 3450 - total flux cleaned = 0.0294057 Jy ! Component: 3500 - total flux cleaned = 0.0294939 Jy ! Component: 3550 - total flux cleaned = 0.0295821 Jy ! Component: 3600 - total flux cleaned = 0.0297569 Jy ! Component: 3650 - total flux cleaned = 0.0298876 Jy ! Component: 3700 - total flux cleaned = 0.0301034 Jy ! Component: 3750 - total flux cleaned = 0.0303185 Jy ! Component: 3800 - total flux cleaned = 0.0306172 Jy ! Component: 3850 - total flux cleaned = 0.0306173 Jy ! Component: 3900 - total flux cleaned = 0.0308284 Jy ! Component: 3950 - total flux cleaned = 0.0309545 Jy ! Component: 4000 - total flux cleaned = 0.0311217 Jy ! Component: 4050 - total flux cleaned = 0.0313294 Jy ! Total flux subtracted in 4096 components = 0.031412 Jy ! Clean residual min=-0.003261 max=0.002795 Jy/beam ! Clean residual mean=0.000064 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 3.12154 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 707 components and 3.12154 Jy wmap "J0433+0521_S_2003_06_18_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.443 x 4.81 at 3.981 degrees (North through East) ! Clean map min=-0.0039749 max=1.0386 Jy/beam ! Writing clean map to FITS file: J0433+0521_S_2003_06_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.03864 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000747394 device "J0433+0521_S_2003_06_18_pus\_map.eps/VPS" ! Attempting to open device: 'J0433+0521_S_2003_06_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.215877 0.215877 0.431754 0.863509 1.72702 3.45404 6.90807 13.8161 27.6323 55.2646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.443 x 4.81 at 3.981 degrees (North through East) ! Clean map min=-0.0039749 max=1.0386 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0433+0521_S_2003_06_18_pus\_map.gif/vgif" ! Attempting to open device: 'J0433+0521_S_2003_06_18_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0433+0521_S_2003_06_18_pus_uvs.log closed on Wed Jan 24 00:07:39 2007