! Started logfile: J1911-2006_S_2003_05_07_pus_uvs.log on Sat Dec 23 02:11:50 2006 obs J1911-2006_S_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2003_05_07_pus_uva.fits ! AN table 1: 453 integrations on 171 of 171 possible baselines. ! AN table 2: 10 integrations on 171 of 171 possible baselines. ! AN table 3: 94 integrations on 171 of 171 possible baselines. ! AN table 4: 119 integrations on 171 of 171 possible baselines. ! AN table 5: 101 integrations on 171 of 171 possible baselines. ! AN table 6: Unused. ! AN table 7: 44 integrations on 171 of 171 possible baselines. ! AN table 8: Unused. ! AN table 9: Unused. ! Apparent sampling: 0.0725189 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1676 lines of history. ! ! Reading 40724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.5 float taper_size taper_size = 20. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6418 telescope corrections were flagged in sub-array 1. ! A total of 190 telescope corrections were flagged in sub-array 2. ! A total of 1714 telescope corrections were flagged in sub-array 3. ! A total of 1735 telescope corrections were flagged in sub-array 4. ! A total of 1751 telescope corrections were flagged in sub-array 5. ! A total of 708 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 6418 telescope corrections were flagged in sub-array 1. ! A total of 190 telescope corrections were flagged in sub-array 2. ! A total of 1714 telescope corrections were flagged in sub-array 3. ! A total of 1735 telescope corrections were flagged in sub-array 4. ! A total of 1751 telescope corrections were flagged in sub-array 5. ! A total of 708 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 6418 telescope corrections were flagged in sub-array 1. ! A total of 190 telescope corrections were flagged in sub-array 2. ! A total of 1714 telescope corrections were flagged in sub-array 3. ! A total of 1735 telescope corrections were flagged in sub-array 4. ! A total of 1751 telescope corrections were flagged in sub-array 5. ! A total of 708 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 6418 telescope corrections were flagged in sub-array 1. ! A total of 190 telescope corrections were flagged in sub-array 2. ! A total of 1714 telescope corrections were flagged in sub-array 3. ! A total of 1735 telescope corrections were flagged in sub-array 4. ! A total of 1751 telescope corrections were flagged in sub-array 5. ! A total of 708 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.218399Jy sigma=0.007614 ! Fit after self-cal, rms=0.730055Jy sigma=0.003739 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.158 mas, bmaj=4.276 mas, bpa=-2.673 degrees ! Estimated noise=1190.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.722852 Jy ! Component: 100 - total flux cleaned = 1.0221 Jy ! Total flux subtracted in 100 components = 1.0221 Jy ! Clean residual min=-0.055150 max=0.147741 Jy/beam ! Clean residual mean=0.001568 rms=0.016787 Jy/beam ! Combined flux in latest and established models = 1.0221 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.0221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.657991Jy sigma=0.003325 ! Fit after self-cal, rms=0.656896Jy sigma=0.003321 ! Inverting map ! Added new window around map position (2, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178732 Jy ! Component: 100 - total flux cleaned = 0.296609 Jy ! Total flux subtracted in 100 components = 0.296609 Jy ! Clean residual min=-0.032842 max=0.098481 Jy/beam ! Clean residual mean=0.000878 rms=0.010784 Jy/beam ! Combined flux in latest and established models = 1.31871 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 1.31871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.587435Jy sigma=0.002394 ! Fit after self-cal, rms=0.585772Jy sigma=0.002383 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885475 Jy ! Component: 100 - total flux cleaned = 0.147845 Jy ! Total flux subtracted in 100 components = 0.147845 Jy ! Clean residual min=-0.024599 max=0.069131 Jy/beam ! Clean residual mean=0.000531 rms=0.008498 Jy/beam ! Combined flux in latest and established models = 1.46656 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 1.46655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568533Jy sigma=0.002064 ! Fit after self-cal, rms=0.567265Jy sigma=0.002055 ! Inverting map ! Added new window around map position (5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592496 Jy ! Component: 100 - total flux cleaned = 0.0990665 Jy ! Total flux subtracted in 100 components = 0.0990665 Jy ! Clean residual min=-0.022182 max=0.047226 Jy/beam ! Clean residual mean=0.000281 rms=0.007233 Jy/beam ! Combined flux in latest and established models = 1.56562 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 1.56562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.559837Jy sigma=0.001907 ! Fit after self-cal, rms=0.559022Jy sigma=0.001900 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=5.731 mas, bpa=-5.746 degrees ! Estimated noise=631.037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548844 Jy ! Component: 100 - total flux cleaned = 0.0853195 Jy ! Component: 150 - total flux cleaned = 0.104473 Jy ! Component: 200 - total flux cleaned = 0.116793 Jy ! Total flux subtracted in 200 components = 0.116793 Jy ! Clean residual min=-0.025161 max=0.032695 Jy/beam ! Clean residual mean=-0.000044 rms=0.007076 Jy/beam ! Combined flux in latest and established models = 1.68241 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 1.68241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.556345Jy sigma=0.001808 ! Fit after self-cal, rms=0.555510Jy sigma=0.001803 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 GG 1.00* HN 1.03 ! KK 1.20 KP 0.85 LA 1.03 MA 1.78 ! MC 1.05 MK 0.98 NL 0.98 ON 1.00 ! OV 0.92 PT 1.01 SC 0.93 TC 1.05 ! TS 1.00* WF 0.95 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.44 ! MC 0.98 MK 1.00* NL 1.00* ON 1.17 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.16 ! ! A total of 51 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.97 GG 1.00* HN 0.85 ! KK 0.93 KP 0.86 LA 1.02 MA 1.00* ! MC 1.00* MK 1.05 NL 0.95 ON 1.00* ! OV 0.89 PT 0.99 SC 0.87 TC 1.27 ! TS 1.00* WF 0.90 WZ 1.00* ! ! A total of 84 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.40 ! MC 1.01 MK 1.00* NL 1.00* ON 1.04 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.08 ! ! A total of 42 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 0.98 KP 1.13 LA 1.00* MA 1.00* ! MC 1.00* MK 0.94 NL 1.00* ON 1.00* ! OV 0.97 PT 1.00* SC 1.00* TC 1.00* ! TS 1.13 WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 GG 1.00* HN 1.13 ! KK 1.00 KP 0.82 LA 0.98 MA 1.23 ! MC 1.02 MK 1.02 NL 1.01 ON 1.37 ! OV 0.94 PT 0.99 SC 0.95 TC 1.06 ! TS 1.00* WF 1.01 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.19 ! MC 1.07 MK 1.00* NL 1.00* ON 1.24 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.10 ! ! A total of 51 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.00 GG 1.00* HN 0.99 ! KK 0.97 KP 0.93 LA 0.96 MA 1.00* ! MC 1.00* MK 1.00 NL 0.98 ON 1.00* ! OV 0.92 PT 0.98 SC 0.89 TC 1.27 ! TS 1.00* WF 1.01 WZ 1.00* ! ! A total of 84 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.11 ! MC 1.01 MK 1.00* NL 1.00* ON 1.18 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.07 ! ! A total of 42 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.02 KP 1.14 LA 1.00* MA 1.00* ! MC 1.00* MK 1.01 NL 1.00* ON 1.00* ! OV 0.99 PT 1.00* SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 GG 1.00* HN 1.13 ! KK 0.93 KP 0.88 LA 0.99 MA 1.27 ! MC 1.17 MK 0.97 NL 1.02 ON 1.33 ! OV 0.95 PT 1.03 SC 1.09 TC 0.90 ! TS 1.00* WF 1.02 WZ 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.18 ! MC 1.80 MK 1.00* NL 1.00* ON 1.08 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.13 ! ! A total of 51 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.96 GG 1.00* HN 1.00 ! KK 0.96 KP 0.96 LA 0.98 MA 1.00* ! MC 1.00* MK 0.95 NL 0.98 ON 1.00* ! OV 0.79 PT 1.00 SC 1.02 TC 1.02 ! TS 1.00* WF 1.02 WZ 1.00* ! ! A total of 84 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.02 ! MC 1.40 MK 1.00* NL 1.00* ON 1.15 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.07 ! ! A total of 42 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.01 KP 1.15 LA 1.00* MA 1.00* ! MC 1.00* MK 0.97 NL 1.00* ON 1.00* ! OV 0.99 PT 1.00* SC 1.00* TC 1.00* ! TS 1.03 WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 GG 1.00* HN 1.51 ! KK 0.93 KP 0.86 LA 1.00 MA 1.92 ! MC 0.93 MK 1.00 NL 0.96 ON 1.10 ! OV 0.90 PT 0.98 SC 1.08 TC 1.05 ! TS 1.00* WF 0.99 WZ 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.40 ! MC 1.01 MK 1.00* NL 1.00* ON 1.03 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.09 ! ! A total of 51 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.96 GG 1.00* HN 0.87 ! KK 0.94 KP 0.94 LA 0.97 MA 1.00* ! MC 1.00* MK 1.01 NL 0.93 ON 1.00* ! OV 0.80 PT 0.96 SC 1.20 TC 1.16 ! TS 1.00* WF 1.02 WZ 1.00* ! ! A total of 84 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.20 ! MC 1.04 MK 1.00* NL 1.00* ON 1.05 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.03 ! ! A total of 42 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 0.99 KP 1.11 LA 1.00* MA 1.00* ! MC 1.00* MK 1.02 NL 1.00* ON 1.00* ! OV 0.95 PT 1.00* SC 1.00* TC 1.00* ! TS 0.98 WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.555510Jy sigma=0.001803 ! Fit after self-cal, rms=0.625723Jy sigma=0.001572 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=5.846 mas, bpa=-6.476 degrees ! Estimated noise=636.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633435 Jy ! Component: 100 - total flux cleaned = 0.00421444 Jy ! Component: 150 - total flux cleaned = 0.00334619 Jy ! Component: 200 - total flux cleaned = 0.00311274 Jy ! Total flux subtracted in 200 components = 0.00311274 Jy ! Clean residual min=-0.011854 max=0.019001 Jy/beam ! Clean residual mean=0.002410 rms=0.004015 Jy/beam ! Combined flux in latest and established models = 1.68553 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 91 components and 1.68553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.625066Jy sigma=0.001568 ! Fit after self-cal, rms=0.626248Jy sigma=0.001567 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.626248Jy sigma=0.001567 ! Fit after self-cal, rms=0.735440Jy sigma=0.001477 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=5.853 mas, bpa=-6.547 degrees ! Estimated noise=637.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226459 Jy ! Component: 100 - total flux cleaned = -0.00307182 Jy ! Component: 150 - total flux cleaned = -0.0032952 Jy ! Component: 200 - total flux cleaned = -0.00350098 Jy ! Total flux subtracted in 200 components = -0.00350098 Jy ! Clean residual min=-0.008678 max=0.013199 Jy/beam ! Clean residual mean=0.000504 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 1.68203 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 96 components and 1.68203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735087Jy sigma=0.001474 ! Fit after self-cal, rms=0.736802Jy sigma=0.001473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.49746e-05 Jy ! Component: 100 - total flux cleaned = -0.00040638 Jy ! Component: 150 - total flux cleaned = -0.000408228 Jy ! Component: 200 - total flux cleaned = -0.000410525 Jy ! Total flux subtracted in 200 components = -0.000410525 Jy ! Clean residual min=-0.008397 max=0.011757 Jy/beam ! Clean residual mean=0.000523 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 1.68162 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 1.68162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736642Jy sigma=0.001472 ! Fit after self-cal, rms=0.736634Jy sigma=0.001472 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736634Jy sigma=0.001472 ! Fit after self-cal, rms=0.749389Jy sigma=0.001449 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=5.892 mas, bpa=-6.632 degrees ! Estimated noise=638.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659486 Jy ! Component: 100 - total flux cleaned = -0.000855077 Jy ! Component: 150 - total flux cleaned = -0.000862123 Jy ! Component: 200 - total flux cleaned = -0.000733089 Jy ! Total flux subtracted in 200 components = -0.000733089 Jy ! Clean residual min=-0.004971 max=0.010011 Jy/beam ! Clean residual mean=0.000692 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 1.68088 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 1.68088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749234Jy sigma=0.001448 ! Fit after self-cal, rms=0.749350Jy sigma=0.001448 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861732 Jy ! Component: 100 - total flux cleaned = 0.00942966 Jy ! Component: 150 - total flux cleaned = 0.00976762 Jy ! Component: 200 - total flux cleaned = 0.0102142 Jy ! Total flux subtracted in 200 components = 0.0102142 Jy ! Clean residual min=-0.005121 max=0.007537 Jy/beam ! Clean residual mean=0.000483 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 1.6911 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 1.6911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749136Jy sigma=0.001445 ! Fit after self-cal, rms=0.749093Jy sigma=0.001445 ! Inverting map ! Added new window around map position (-3.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137999 Jy ! Component: 100 - total flux cleaned = 0.00116464 Jy ! Component: 150 - total flux cleaned = 0.00150666 Jy ! Component: 200 - total flux cleaned = 0.00166229 Jy ! Total flux subtracted in 200 components = 0.00166229 Jy ! Clean residual min=-0.004925 max=0.006181 Jy/beam ! Clean residual mean=0.000452 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 1.69276 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 1.69276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748945Jy sigma=0.001444 ! Fit after self-cal, rms=0.748829Jy sigma=0.001444 ! Inverting map ! Added new window around map position (42.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432436 Jy ! Component: 100 - total flux cleaned = 0.00464069 Jy ! Component: 150 - total flux cleaned = 0.00463874 Jy ! Component: 200 - total flux cleaned = 0.00489658 Jy ! Total flux subtracted in 200 components = 0.00489658 Jy ! Clean residual min=-0.004701 max=0.005037 Jy/beam ! Clean residual mean=0.000367 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 1.69766 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 1.69766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748693Jy sigma=0.001443 ! Fit after self-cal, rms=0.748601Jy sigma=0.001443 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748601Jy sigma=0.001443 ! Fit after self-cal, rms=0.748406Jy sigma=0.001442 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.449 mas, bmaj=14.13 mas, bpa=-6.353 degrees ! Estimated noise=756.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039203 Jy ! Component: 100 - total flux cleaned = 0.00502372 Jy ! Component: 150 - total flux cleaned = 0.00550573 Jy ! Component: 200 - total flux cleaned = 0.00573231 Jy ! Total flux subtracted in 200 components = 0.00573231 Jy ! Clean residual min=-0.002860 max=0.004405 Jy/beam ! Clean residual mean=0.000581 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 1.70339 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 161 components and 1.70339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748407Jy sigma=0.001442 ! Fit after self-cal, rms=0.748393Jy sigma=0.001442 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033477 Jy ! Component: 100 - total flux cleaned = 0.000639089 Jy ! Component: 150 - total flux cleaned = 0.000741661 Jy ! Component: 200 - total flux cleaned = 0.000790373 Jy ! Total flux subtracted in 200 components = 0.000790373 Jy ! Clean residual min=-0.002851 max=0.004216 Jy/beam ! Clean residual mean=0.000560 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 1.70418 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 167 components and 1.70418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748396Jy sigma=0.001442 ! Fit after self-cal, rms=0.748404Jy sigma=0.001442 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=5.9 mas, bpa=-6.626 degrees ! Estimated noise=639.064 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.724 x 5.9 at -6.626 degrees (North through East) ! Clean map min=-0.0066482 max=0.98469 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748404Jy sigma=0.001442 ! Fit after self-cal, rms=1.493142Jy sigma=0.001269 ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=5.898 mas, bpa=-6.654 degrees ! Estimated noise=638.552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247725 Jy ! Component: 100 - total flux cleaned = 0.00262004 Jy ! Component: 150 - total flux cleaned = 0.00262249 Jy ! Component: 200 - total flux cleaned = 0.00285729 Jy ! Total flux subtracted in 200 components = 0.00285729 Jy ! Clean residual min=-0.004303 max=0.004891 Jy/beam ! Clean residual mean=0.000272 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 1.70704 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 176 components and 1.70704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.493113Jy sigma=0.001268 ! Fit after self-cal, rms=1.493033Jy sigma=0.001268 ! Inverting map ! Added new window around map position (22.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409643 Jy ! Component: 100 - total flux cleaned = 0.00448839 Jy ! Component: 150 - total flux cleaned = 0.00448556 Jy ! Component: 200 - total flux cleaned = 0.00448643 Jy ! Total flux subtracted in 200 components = 0.00448643 Jy ! Clean residual min=-0.004216 max=0.004178 Jy/beam ! Clean residual mean=0.000179 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 1.71152 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 188 components and 1.71152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492978Jy sigma=0.001268 ! Fit after self-cal, rms=1.492913Jy sigma=0.001268 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492913Jy sigma=0.001268 ! Fit after self-cal, rms=1.531003Jy sigma=0.001267 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=4.37 mas, bpa=-3.922 degrees ! Estimated noise=1223.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.727895 Jy ! Component: 100 - total flux cleaned = 1.03183 Jy ! Component: 150 - total flux cleaned = 1.21528 Jy ! Component: 200 - total flux cleaned = 1.33811 Jy ! Total flux subtracted in 200 components = 1.33811 Jy ! Clean residual min=-0.018953 max=0.066751 Jy/beam ! Clean residual mean=0.000925 rms=0.007499 Jy/beam ! Combined flux in latest and established models = 1.33811 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.33811 Jy ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=5.888 mas, bpa=-6.631 degrees ! Estimated noise=638.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140934 Jy ! Component: 100 - total flux cleaned = 0.220105 Jy ! Component: 150 - total flux cleaned = 0.267203 Jy ! Component: 200 - total flux cleaned = 0.296995 Jy ! Total flux subtracted in 200 components = 0.296995 Jy ! Clean residual min=-0.005612 max=0.016504 Jy/beam ! Clean residual mean=0.001714 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 1.6351 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 93 components and 1.6351 Jy ! Inverting map ! Added new window around map position (1, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202239 Jy ! Component: 100 - total flux cleaned = 0.0347678 Jy ! Component: 150 - total flux cleaned = 0.0457152 Jy ! Component: 200 - total flux cleaned = 0.0543189 Jy ! Total flux subtracted in 200 components = 0.0543189 Jy ! Clean residual min=-0.004202 max=0.005849 Jy/beam ! Clean residual mean=0.000639 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 1.68942 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 122 components and 1.68942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.444 mas, bmaj=14.14 mas, bpa=-6.308 degrees ! Estimated noise=757.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104529 Jy ! Component: 100 - total flux cleaned = 0.0167058 Jy ! Component: 150 - total flux cleaned = 0.0206276 Jy ! Component: 200 - total flux cleaned = 0.0220387 Jy ! Total flux subtracted in 200 components = 0.0220387 Jy ! Clean residual min=-0.002512 max=0.003495 Jy/beam ! Clean residual mean=0.000480 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 1.71146 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115951 Jy ! Component: 100 - total flux cleaned = 0.00211854 Jy ! Component: 150 - total flux cleaned = 0.00291724 Jy ! Component: 200 - total flux cleaned = 0.00329492 Jy ! Total flux subtracted in 200 components = 0.00329492 Jy ! Clean residual min=-0.002372 max=0.003223 Jy/beam ! Clean residual mean=0.000337 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 1.71476 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 215 components and 1.71476 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=5.888 mas, bpa=-6.631 degrees ! Estimated noise=638.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552627 Jy ! Component: 100 - total flux cleaned = -2.76409e-05 Jy ! Component: 150 - total flux cleaned = 0.00032934 Jy ! Component: 200 - total flux cleaned = 0.000551007 Jy ! Total flux subtracted in 200 components = 0.000551007 Jy ! Clean residual min=-0.004099 max=0.003596 Jy/beam ! Clean residual mean=0.000142 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 1.71531 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 239 components and 1.71531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.530941Jy sigma=0.001267 ! Fit after self-cal, rms=1.531897Jy sigma=0.001267 wmodel J1911-2006_S_2003_05_07_pus_map.mod ! Writing 239 model components to file: J1911-2006_S_2003_05_07_pus_map.mod wobs J1911-2006_S_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2003_05_07_pus_uvs.fits wwins J1911-2006_S_2003_05_07_pus_map.win ! wwins: Wrote 8 windows to J1911-2006_S_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.12038e-06 Jy ! Component: 100 - total flux cleaned = 0.000811978 Jy ! Component: 150 - total flux cleaned = 0.00140084 Jy ! Component: 200 - total flux cleaned = 0.00168719 Jy ! Component: 250 - total flux cleaned = 0.00191089 Jy ! Component: 300 - total flux cleaned = 0.00207486 Jy ! Component: 350 - total flux cleaned = 0.00223502 Jy ! Component: 400 - total flux cleaned = 0.00233953 Jy ! Component: 450 - total flux cleaned = 0.00233925 Jy ! Component: 500 - total flux cleaned = 0.00244174 Jy ! Component: 550 - total flux cleaned = 0.00249234 Jy ! Component: 600 - total flux cleaned = 0.00259211 Jy ! Component: 650 - total flux cleaned = 0.00264131 Jy ! Component: 700 - total flux cleaned = 0.00278771 Jy ! Component: 750 - total flux cleaned = 0.00293201 Jy ! Component: 800 - total flux cleaned = 0.00297953 Jy ! Component: 850 - total flux cleaned = 0.00312188 Jy ! Component: 900 - total flux cleaned = 0.00321575 Jy ! Component: 950 - total flux cleaned = 0.00330865 Jy ! Component: 1000 - total flux cleaned = 0.00340097 Jy ! Component: 1050 - total flux cleaned = 0.0035382 Jy ! Component: 1100 - total flux cleaned = 0.00362867 Jy ! Component: 1150 - total flux cleaned = 0.00371841 Jy ! Component: 1200 - total flux cleaned = 0.003763 Jy ! Component: 1250 - total flux cleaned = 0.00385147 Jy ! Component: 1300 - total flux cleaned = 0.00393944 Jy ! Component: 1350 - total flux cleaned = 0.00393915 Jy ! Component: 1400 - total flux cleaned = 0.00406905 Jy ! Component: 1450 - total flux cleaned = 0.00411193 Jy ! Component: 1500 - total flux cleaned = 0.00415451 Jy ! Component: 1550 - total flux cleaned = 0.00415441 Jy ! Component: 1600 - total flux cleaned = 0.00423869 Jy ! Component: 1650 - total flux cleaned = 0.0042387 Jy ! Component: 1700 - total flux cleaned = 0.0042803 Jy ! Component: 1750 - total flux cleaned = 0.0043633 Jy ! Component: 1800 - total flux cleaned = 0.00436333 Jy ! Component: 1850 - total flux cleaned = 0.0044452 Jy ! Component: 1900 - total flux cleaned = 0.00444514 Jy ! Component: 1950 - total flux cleaned = 0.00440489 Jy ! Component: 2000 - total flux cleaned = 0.00448542 Jy ! Total flux subtracted in 2048 components = 0.00452516 Jy ! Clean residual min=-0.002607 max=0.002269 Jy/beam ! Clean residual mean=0.000060 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 1.71983 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 377 components and 1.71983 Jy wmap "J1911-2006_S_2003_05_07_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.718 x 5.888 at -6.631 degrees (North through East) ! Clean map min=-0.0045584 max=0.98566 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.985664 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00073643 device "J1911-2006_S_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1911-2006_S_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224142 0.224142 0.448285 0.896569 1.79314 3.58628 7.17255 14.3451 28.6902 57.3804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.985 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.718 x 5.888 at -6.631 degrees (North through East) ! Clean map min=-0.0045584 max=0.98566 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1911-2006_S_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1911-2006_S_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1911-2006_S_2003_05_07_pus_uvs.log closed on Sat Dec 23 02:16:00 2006