! Started logfile: J1517-2422_X_2003_05_07_pus_uvs.log on Thu Dec 14 18:39:49 2006 obs J1517-2422_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1517-2422_X_2003_05_07_pus_uva.fits ! AN table 1: 101 integrations on 171 of 171 possible baselines. ! AN table 2: 11 integrations on 171 of 171 possible baselines. ! AN table 3: Unused. ! AN table 4: 10 integrations on 171 of 171 possible baselines. ! AN table 5: 48 integrations on 171 of 171 possible baselines. ! AN table 6: 334 integrations on 171 of 171 possible baselines. ! AN table 7: Unused. ! AN table 8: 216 integrations on 171 of 171 possible baselines. ! AN table 9: Unused. ! Apparent sampling: 0.0390757 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1517-2422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1735 lines of history. ! ! Reading 19244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 1024 float field_cell field_cell = 0.1 float taper_size taper_size = 120. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1710 telescope corrections were flagged in sub-array 1. ! A total of 176 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 813 telescope corrections were flagged in sub-array 4. ! A total of 5440 telescope corrections were flagged in sub-array 5. ! A total of 3466 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 1710 telescope corrections were flagged in sub-array 1. ! A total of 176 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 813 telescope corrections were flagged in sub-array 4. ! A total of 5444 telescope corrections were flagged in sub-array 5. ! A total of 3386 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 1713 telescope corrections were flagged in sub-array 1. ! A total of 176 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 813 telescope corrections were flagged in sub-array 4. ! A total of 5446 telescope corrections were flagged in sub-array 5. ! A total of 3466 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 1710 telescope corrections were flagged in sub-array 1. ! A total of 176 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! A total of 813 telescope corrections were flagged in sub-array 4. ! A total of 5443 telescope corrections were flagged in sub-array 5. ! A total of 3466 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.857299Jy sigma=0.005774 ! Fit after self-cal, rms=0.547505Jy sigma=0.003033 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6434 mas, bmaj=1.356 mas, bpa=-5.369 degrees ! Estimated noise=1274.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.638696 Jy ! Component: 100 - total flux cleaned = 0.872941 Jy ! Total flux subtracted in 100 components = 0.872941 Jy ! Clean residual min=-0.045252 max=0.125842 Jy/beam ! Clean residual mean=0.000745 rms=0.012818 Jy/beam ! Combined flux in latest and established models = 0.872941 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.872941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.457790Jy sigma=0.002848 ! Fit after self-cal, rms=0.457935Jy sigma=0.002845 ! Inverting map ! Added new window around map position (0.4, -1.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132657 Jy ! Component: 100 - total flux cleaned = 0.213517 Jy ! Total flux subtracted in 100 components = 0.213517 Jy ! Clean residual min=-0.030695 max=0.056382 Jy/beam ! Clean residual mean=0.000504 rms=0.008501 Jy/beam ! Combined flux in latest and established models = 1.08646 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 1.08646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417310Jy sigma=0.002117 ! Fit after self-cal, rms=0.415171Jy sigma=0.002106 ! Inverting map ! Added new window around map position (1.2, -3.3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0618746 Jy ! Component: 100 - total flux cleaned = 0.103704 Jy ! Total flux subtracted in 100 components = 0.103704 Jy ! Clean residual min=-0.024056 max=0.038418 Jy/beam ! Clean residual mean=0.000367 rms=0.007019 Jy/beam ! Combined flux in latest and established models = 1.19016 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 1.19016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404157Jy sigma=0.001872 ! Fit after self-cal, rms=0.403089Jy sigma=0.001866 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7795 mas, bmaj=1.444 mas, bpa=-9.694 degrees ! Estimated noise=765.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606869 Jy ! Component: 100 - total flux cleaned = 0.0982523 Jy ! Component: 150 - total flux cleaned = 0.122809 Jy ! Component: 200 - total flux cleaned = 0.139163 Jy ! Total flux subtracted in 200 components = 0.139163 Jy ! Clean residual min=-0.029559 max=0.046100 Jy/beam ! Clean residual mean=0.001283 rms=0.011920 Jy/beam ! Combined flux in latest and established models = 1.32932 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 90 components and 1.32932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396456Jy sigma=0.001689 ! Fit after self-cal, rms=0.395709Jy sigma=0.001679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 GG 1.00* HN 1.18 ! KK 1.12 KP 1.03 LA 0.91 MA 1.00* ! MC 1.00* MK 0.99 NL 1.02 ON 1.00* ! OV 1.05 PT 0.93 SC 0.93 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.00 GG 1.00* HN 1.12 ! KK 1.00* KP 1.16 LA 0.90 MA 1.00* ! MC 1.00* MK 0.93 NL 1.14 ON 1.00* ! OV 0.95 PT 0.91 SC 1.09 TC 1.24 ! TS 1.00* WF 0.93 WZ 1.00* ! ! A total of 321 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.09 ! MC 1.24 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.97 TC 1.21 ! TS 1.00* WF 1.03 WZ 1.12 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 GG 1.00* HN 1.20 ! KK 1.13 KP 0.97 LA 0.93 MA 1.00* ! MC 1.00* MK 0.98 NL 0.97 ON 1.00* ! OV 1.04 PT 0.96 SC 0.90 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 108 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.00 GG 1.00* HN 1.12 ! KK 1.00* KP 1.11 LA 0.91 MA 1.00* ! MC 1.00* MK 0.94 NL 1.09 ON 1.00* ! OV 0.95 PT 0.95 SC 1.01 TC 1.10 ! TS 1.00* WF 1.04 WZ 1.00* ! ! A total of 162 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.10 ! MC 1.17 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.92 TC 1.13 ! TS 1.00* WF 1.04 WZ 1.20 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 GG 1.00* HN 1.16 ! KK 1.20 KP 0.90 LA 0.91 MA 1.00* ! MC 1.00* MK 0.97 NL 0.97 ON 1.00* ! OV 1.07 PT 0.99 SC 0.93 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 105 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 0.99 GG 1.00* HN 1.14 ! KK 1.00* KP 1.03 LA 0.92 MA 1.00* ! MC 1.00* MK 0.95 NL 1.07 ON 1.00* ! OV 0.99 PT 0.98 SC 1.04 TC 0.98 ! TS 1.00* WF 1.05 WZ 1.00* ! ! A total of 321 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.12 ! MC 1.23 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.95 TC 1.22 ! TS 1.00* WF 0.98 WZ 1.13 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 GG 1.00* HN 1.16 ! KK 1.26 KP 0.96 LA 0.91 MA 1.00* ! MC 1.00* MK 1.08 NL 1.00 ON 1.00* ! OV 1.07 PT 1.00 SC 0.94 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 108 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 0.97 GG 1.00* HN 1.14 ! KK 1.00* KP 1.09 LA 0.90 MA 1.00* ! MC 1.00* MK 0.97 NL 1.08 ON 1.00* ! OV 0.98 PT 0.99 SC 1.08 TC 0.80 ! TS 1.00* WF 0.93 WZ 1.00* ! ! A total of 321 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.10 ! MC 1.84 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00 TC 0.93 ! TS 1.00* WF 0.97 WZ 1.18 ! ! ! Fit before self-cal, rms=0.395709Jy sigma=0.001679 ! Fit after self-cal, rms=0.382981Jy sigma=0.001447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8484 mas, bmaj=1.491 mas, bpa=-12.61 degrees ! Estimated noise=783.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362407 Jy ! Component: 100 - total flux cleaned = 0.00432048 Jy ! Component: 150 - total flux cleaned = 0.00515894 Jy ! Component: 200 - total flux cleaned = 0.00591718 Jy ! Total flux subtracted in 200 components = 0.00591718 Jy ! Clean residual min=-0.019622 max=0.028503 Jy/beam ! Clean residual mean=0.000649 rms=0.006853 Jy/beam ! Combined flux in latest and established models = 1.33524 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 1.33524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382214Jy sigma=0.001438 ! Fit after self-cal, rms=0.382103Jy sigma=0.001436 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382103Jy sigma=0.001436 ! Fit after self-cal, rms=0.375750Jy sigma=0.001337 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8481 mas, bmaj=1.493 mas, bpa=-12.62 degrees ! Estimated noise=783.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742676 Jy ! Component: 100 - total flux cleaned = 0.00772835 Jy ! Component: 150 - total flux cleaned = 0.00825086 Jy ! Component: 200 - total flux cleaned = 0.00848523 Jy ! Total flux subtracted in 200 components = 0.00848523 Jy ! Clean residual min=-0.014469 max=0.027117 Jy/beam ! Clean residual mean=0.000130 rms=0.004945 Jy/beam ! Combined flux in latest and established models = 1.34373 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 104 components and 1.34373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375058Jy sigma=0.001327 ! Fit after self-cal, rms=0.374724Jy sigma=0.001326 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.3, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024798 Jy ! Component: 100 - total flux cleaned = 0.0360276 Jy ! Component: 150 - total flux cleaned = 0.037605 Jy ! Component: 200 - total flux cleaned = 0.0378658 Jy ! Total flux subtracted in 200 components = 0.0378658 Jy ! Clean residual min=-0.011629 max=0.018686 Jy/beam ! Clean residual mean=-0.000273 rms=0.003779 Jy/beam ! Combined flux in latest and established models = 1.38159 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 1.38159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373259Jy sigma=0.001293 ! Fit after self-cal, rms=0.372864Jy sigma=0.001289 ! Inverting map ! Added new window around map position (5.8, -13.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197413 Jy ! Component: 100 - total flux cleaned = 0.029291 Jy ! Component: 150 - total flux cleaned = 0.0323561 Jy ! Component: 200 - total flux cleaned = 0.0346337 Jy ! Total flux subtracted in 200 components = 0.0346337 Jy ! Clean residual min=-0.012937 max=0.012481 Jy/beam ! Clean residual mean=-0.000580 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 1.41623 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 1.41623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371561Jy sigma=0.001266 ! Fit after self-cal, rms=0.371386Jy sigma=0.001264 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371386Jy sigma=0.001264 ! Fit after self-cal, rms=0.366775Jy sigma=0.001227 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8474 mas, bmaj=1.486 mas, bpa=-12.32 degrees ! Estimated noise=782.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116219 Jy ! Component: 100 - total flux cleaned = 0.0200496 Jy ! Component: 150 - total flux cleaned = 0.0242229 Jy ! Component: 200 - total flux cleaned = 0.0270231 Jy ! Total flux subtracted in 200 components = 0.0270231 Jy ! Clean residual min=-0.007499 max=0.009659 Jy/beam ! Clean residual mean=0.000022 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 1.44325 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 1.44325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366220Jy sigma=0.001216 ! Fit after self-cal, rms=0.365982Jy sigma=0.001215 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.2, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104396 Jy ! Component: 100 - total flux cleaned = 0.0136383 Jy ! Component: 150 - total flux cleaned = 0.014581 Jy ! Component: 200 - total flux cleaned = 0.0150973 Jy ! Total flux subtracted in 200 components = 0.0150973 Jy ! Clean residual min=-0.009092 max=0.008271 Jy/beam ! Clean residual mean=-0.000095 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 1.45835 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 185 components and 1.45835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365519Jy sigma=0.001208 ! Fit after self-cal, rms=0.365378Jy sigma=0.001208 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365378Jy sigma=0.001208 ! Fit after self-cal, rms=0.363038Jy sigma=0.001204 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.516 mas, bmaj=3.473 mas, bpa=-9.349 degrees ! Estimated noise=799.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088095 Jy ! Component: 100 - total flux cleaned = 0.0145501 Jy ! Component: 150 - total flux cleaned = 0.0170506 Jy ! Component: 200 - total flux cleaned = 0.0189067 Jy ! Total flux subtracted in 200 components = 0.0189067 Jy ! Clean residual min=-0.006196 max=0.008656 Jy/beam ! Clean residual mean=0.000013 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 1.47725 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 215 components and 1.47725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362866Jy sigma=0.001200 ! Fit after self-cal, rms=0.362804Jy sigma=0.001199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -7.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618032 Jy ! Component: 100 - total flux cleaned = 0.00670483 Jy ! Component: 150 - total flux cleaned = 0.0074325 Jy ! Component: 200 - total flux cleaned = 0.00832322 Jy ! Total flux subtracted in 200 components = 0.00832322 Jy ! Clean residual min=-0.006440 max=0.006086 Jy/beam ! Clean residual mean=-0.000108 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 1.48558 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 250 components and 1.48558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362588Jy sigma=0.001196 ! Fit after self-cal, rms=0.362543Jy sigma=0.001196 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=1.484 mas, bpa=-12.3 degrees ! Estimated noise=781.449 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 1.484 at -12.3 degrees (North through East) ! Clean map min=-0.0073816 max=0.67273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362543Jy sigma=0.001196 ! Fit after self-cal, rms=0.975009Jy sigma=0.001061 ! Inverting map and beam ! Estimated beam: bmin=0.847 mas, bmaj=1.489 mas, bpa=-12.44 degrees ! Estimated noise=780.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656477 Jy ! Component: 100 - total flux cleaned = 0.00990299 Jy ! Component: 150 - total flux cleaned = 0.0108282 Jy ! Component: 200 - total flux cleaned = 0.0113897 Jy ! Total flux subtracted in 200 components = 0.0113897 Jy ! Clean residual min=-0.006018 max=0.005100 Jy/beam ! Clean residual mean=0.000031 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 1.49697 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 273 components and 1.49697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974876Jy sigma=0.001058 ! Fit after self-cal, rms=0.974860Jy sigma=0.001058 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184429 Jy ! Component: 100 - total flux cleaned = 0.00235946 Jy ! Component: 150 - total flux cleaned = 0.00260108 Jy ! Component: 200 - total flux cleaned = 0.00283337 Jy ! Total flux subtracted in 200 components = 0.00283337 Jy ! Clean residual min=-0.006190 max=0.005259 Jy/beam ! Clean residual mean=0.000004 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 1.4998 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 288 components and 1.4998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974783Jy sigma=0.001057 ! Fit after self-cal, rms=0.974776Jy sigma=0.001057 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974776Jy sigma=0.001057 ! Fit after self-cal, rms=1.493130Jy sigma=0.001056 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7247 mas, bmaj=1.402 mas, bpa=-12.47 degrees ! Estimated noise=1327.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.683722 Jy ! Component: 100 - total flux cleaned = 0.926501 Jy ! Component: 150 - total flux cleaned = 1.05082 Jy ! Component: 200 - total flux cleaned = 1.13077 Jy ! Total flux subtracted in 200 components = 1.13077 Jy ! Clean residual min=-0.017919 max=0.045023 Jy/beam ! Clean residual mean=0.000749 rms=0.006070 Jy/beam ! Combined flux in latest and established models = 1.13077 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 69 model components to the UV plane model. ! The established model now contains 69 components and 1.13077 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8468 mas, bmaj=1.491 mas, bpa=-12.48 degrees ! Estimated noise=780.316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0825504 Jy ! Component: 100 - total flux cleaned = 0.138029 Jy ! Component: 150 - total flux cleaned = 0.180879 Jy ! Component: 200 - total flux cleaned = 0.215237 Jy ! Total flux subtracted in 200 components = 0.215237 Jy ! Clean residual min=-0.010588 max=0.022408 Jy/beam ! Clean residual mean=0.001466 rms=0.005996 Jy/beam ! Combined flux in latest and established models = 1.34601 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 157 components and 1.34601 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.515 mas, bmaj=3.469 mas, bpa=-9.32 degrees ! Estimated noise=798.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384894 Jy ! Component: 100 - total flux cleaned = 0.0669996 Jy ! Component: 150 - total flux cleaned = 0.0885864 Jy ! Component: 200 - total flux cleaned = 0.105193 Jy ! Total flux subtracted in 200 components = 0.105193 Jy ! Clean residual min=-0.007076 max=0.011792 Jy/beam ! Clean residual mean=0.000815 rms=0.003378 Jy/beam ! Combined flux in latest and established models = 1.4512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129348 Jy ! Component: 100 - total flux cleaned = 0.0231104 Jy ! Component: 150 - total flux cleaned = 0.0311555 Jy ! Component: 200 - total flux cleaned = 0.0375364 Jy ! Total flux subtracted in 200 components = 0.0375364 Jy ! Clean residual min=-0.005006 max=0.007058 Jy/beam ! Clean residual mean=0.000324 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 1.48874 Jy ! Adding 199 model components to the UV plane model. ! The established model now contains 335 components and 1.48874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8468 mas, bmaj=1.491 mas, bpa=-12.48 degrees ! Estimated noise=780.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608564 Jy ! Component: 100 - total flux cleaned = 0.00955583 Jy ! Component: 150 - total flux cleaned = 0.011419 Jy ! Component: 200 - total flux cleaned = 0.0125368 Jy ! Total flux subtracted in 200 components = 0.0125368 Jy ! Clean residual min=-0.004607 max=0.005122 Jy/beam ! Clean residual mean=0.000094 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 1.50128 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 368 components and 1.50128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.493113Jy sigma=0.001054 ! Fit after self-cal, rms=1.492682Jy sigma=0.001052 wmodel J1517-2422_X_2003_05_07_pus_map.mod ! Writing 368 model components to file: J1517-2422_X_2003_05_07_pus_map.mod wobs J1517-2422_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1517-2422_X_2003_05_07_pus_uvs.fits wwins J1517-2422_X_2003_05_07_pus_map.win ! wwins: Wrote 7 windows to J1517-2422_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179671 Jy ! Component: 100 - total flux cleaned = 0.00314874 Jy ! Component: 150 - total flux cleaned = 0.00426809 Jy ! Component: 200 - total flux cleaned = 0.00511009 Jy ! Component: 250 - total flux cleaned = 0.0053314 Jy ! Component: 300 - total flux cleaned = 0.00554659 Jy ! Component: 350 - total flux cleaned = 0.00575632 Jy ! Component: 400 - total flux cleaned = 0.00589234 Jy ! Component: 450 - total flux cleaned = 0.00582419 Jy ! Component: 500 - total flux cleaned = 0.0060884 Jy ! Component: 550 - total flux cleaned = 0.00621796 Jy ! Component: 600 - total flux cleaned = 0.00653689 Jy ! Component: 650 - total flux cleaned = 0.00678755 Jy ! Component: 700 - total flux cleaned = 0.0071584 Jy ! Component: 750 - total flux cleaned = 0.00746335 Jy ! Component: 800 - total flux cleaned = 0.0077045 Jy ! Component: 850 - total flux cleaned = 0.00800158 Jy ! Component: 900 - total flux cleaned = 0.00811851 Jy ! Component: 950 - total flux cleaned = 0.00829196 Jy ! Component: 1000 - total flux cleaned = 0.00857769 Jy ! Component: 1050 - total flux cleaned = 0.00863552 Jy ! Component: 1100 - total flux cleaned = 0.0089155 Jy ! Component: 1150 - total flux cleaned = 0.00902624 Jy ! Component: 1200 - total flux cleaned = 0.00929917 Jy ! Component: 1250 - total flux cleaned = 0.00951533 Jy ! Component: 1300 - total flux cleaned = 0.00978173 Jy ! Component: 1350 - total flux cleaned = 0.00988633 Jy ! Component: 1400 - total flux cleaned = 0.0100431 Jy ! Component: 1450 - total flux cleaned = 0.010043 Jy ! Component: 1500 - total flux cleaned = 0.00999246 Jy ! Component: 1550 - total flux cleaned = 0.0102478 Jy ! Component: 1600 - total flux cleaned = 0.0103991 Jy ! Component: 1650 - total flux cleaned = 0.0104991 Jy ! Component: 1700 - total flux cleaned = 0.010549 Jy ! Component: 1750 - total flux cleaned = 0.0106959 Jy ! Component: 1800 - total flux cleaned = 0.0107447 Jy ! Component: 1850 - total flux cleaned = 0.0108407 Jy ! Component: 1900 - total flux cleaned = 0.010841 Jy ! Component: 1950 - total flux cleaned = 0.0108882 Jy ! Component: 2000 - total flux cleaned = 0.0111228 Jy ! Component: 2050 - total flux cleaned = 0.0109823 Jy ! Component: 2100 - total flux cleaned = 0.0112138 Jy ! Component: 2150 - total flux cleaned = 0.0113055 Jy ! Component: 2200 - total flux cleaned = 0.0113967 Jy ! Component: 2250 - total flux cleaned = 0.0115328 Jy ! Component: 2300 - total flux cleaned = 0.0115778 Jy ! Component: 2350 - total flux cleaned = 0.0117567 Jy ! Component: 2400 - total flux cleaned = 0.0120229 Jy ! Component: 2450 - total flux cleaned = 0.0120672 Jy ! Component: 2500 - total flux cleaned = 0.0121547 Jy ! Component: 2550 - total flux cleaned = 0.0124156 Jy ! Component: 2600 - total flux cleaned = 0.0125446 Jy ! Component: 2650 - total flux cleaned = 0.0126728 Jy ! Component: 2700 - total flux cleaned = 0.0126301 Jy ! Component: 2750 - total flux cleaned = 0.0127999 Jy ! Component: 2800 - total flux cleaned = 0.0129258 Jy ! Component: 2850 - total flux cleaned = 0.0130513 Jy ! Component: 2900 - total flux cleaned = 0.0132174 Jy ! Component: 2950 - total flux cleaned = 0.0132586 Jy ! Component: 3000 - total flux cleaned = 0.013505 Jy ! Component: 3050 - total flux cleaned = 0.0135865 Jy ! Component: 3100 - total flux cleaned = 0.0137081 Jy ! Component: 3150 - total flux cleaned = 0.0138693 Jy ! Component: 3200 - total flux cleaned = 0.0140295 Jy ! Component: 3250 - total flux cleaned = 0.0141092 Jy ! Component: 3300 - total flux cleaned = 0.0142279 Jy ! Component: 3350 - total flux cleaned = 0.0145428 Jy ! Component: 3400 - total flux cleaned = 0.014699 Jy ! Component: 3450 - total flux cleaned = 0.0147378 Jy ! Component: 3500 - total flux cleaned = 0.0150475 Jy ! Component: 3550 - total flux cleaned = 0.0150858 Jy ! Component: 3600 - total flux cleaned = 0.0152394 Jy ! Component: 3650 - total flux cleaned = 0.0154299 Jy ! Component: 3700 - total flux cleaned = 0.0153918 Jy ! Component: 3750 - total flux cleaned = 0.0155428 Jy ! Component: 3800 - total flux cleaned = 0.0156932 Jy ! Component: 3850 - total flux cleaned = 0.0159173 Jy ! Component: 3900 - total flux cleaned = 0.0159546 Jy ! Component: 3950 - total flux cleaned = 0.0161395 Jy ! Component: 4000 - total flux cleaned = 0.0162868 Jy ! Component: 4050 - total flux cleaned = 0.0163969 Jy ! Total flux subtracted in 4096 components = 0.0164336 Jy ! Clean residual min=-0.002064 max=0.002192 Jy/beam ! Clean residual mean=0.000060 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 1.51771 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 611 components and 1.51771 Jy wmap "J1517-2422_X_2003_05_07_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8468 x 1.491 at -12.48 degrees (North through East) ! Clean map min=-0.003946 max=0.6939 Jy/beam ! Writing clean map to FITS file: J1517-2422_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.693897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000656296 device "J1517-2422_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1517-2422_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.283744 0.283744 0.567488 1.13498 2.26995 4.5399 9.0798 18.1596 36.3192 72.6384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.693 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8468 x 1.491 at -12.48 degrees (North through East) ! Clean map min=-0.003946 max=0.6939 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1517-2422_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1517-2422_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1517-2422_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 18:45:47 2006