! Started logfile: J1513-1012_S_2003_05_07_pus_uvs.log on Sun Dec 24 11:10:51 2006 obs J1513-1012_S_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2003_05_07_pus_uva.fits ! AN table 1: 24 integrations on 171 of 171 possible baselines. ! AN table 2: 76 integrations on 171 of 171 possible baselines. ! AN table 3: 106 integrations on 171 of 171 possible baselines. ! AN table 4: 62 integrations on 171 of 171 possible baselines. ! AN table 5: 89 integrations on 171 of 171 possible baselines. ! AN table 6: 38 integrations on 171 of 171 possible baselines. ! AN table 7: 106 integrations on 171 of 171 possible baselines. ! AN table 8: 271 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0441399 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1680 lines of history. ! ! Reading 23308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.5 float taper_size taper_size = 20. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 444 telescope corrections were flagged in sub-array 1. ! A total of 1376 telescope corrections were flagged in sub-array 2. ! A total of 1693 telescope corrections were flagged in sub-array 3. ! A total of 881 telescope corrections were flagged in sub-array 4. ! A total of 1449 telescope corrections were flagged in sub-array 5. ! A total of 656 telescope corrections were flagged in sub-array 6. ! A total of 1393 telescope corrections were flagged in sub-array 7. ! A total of 4696 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 447 telescope corrections were flagged in sub-array 1. ! A total of 1376 telescope corrections were flagged in sub-array 2. ! A total of 1755 telescope corrections were flagged in sub-array 3. ! A total of 881 telescope corrections were flagged in sub-array 4. ! A total of 1449 telescope corrections were flagged in sub-array 5. ! A total of 656 telescope corrections were flagged in sub-array 6. ! A total of 1393 telescope corrections were flagged in sub-array 7. ! A total of 4693 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 444 telescope corrections were flagged in sub-array 1. ! A total of 1376 telescope corrections were flagged in sub-array 2. ! A total of 1755 telescope corrections were flagged in sub-array 3. ! A total of 881 telescope corrections were flagged in sub-array 4. ! A total of 1449 telescope corrections were flagged in sub-array 5. ! A total of 656 telescope corrections were flagged in sub-array 6. ! A total of 1393 telescope corrections were flagged in sub-array 7. ! A total of 4693 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 447 telescope corrections were flagged in sub-array 1. ! A total of 1385 telescope corrections were flagged in sub-array 2. ! A total of 1758 telescope corrections were flagged in sub-array 3. ! A total of 881 telescope corrections were flagged in sub-array 4. ! A total of 1449 telescope corrections were flagged in sub-array 5. ! A total of 656 telescope corrections were flagged in sub-array 6. ! A total of 1393 telescope corrections were flagged in sub-array 7. ! A total of 4693 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.852438Jy sigma=0.005004 ! Fit after self-cal, rms=0.519368Jy sigma=0.002935 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.884 mas, bmaj=7.134 mas, bpa=-7.018 degrees ! Estimated noise=1211.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.434955 Jy ! Component: 100 - total flux cleaned = 0.550329 Jy ! Total flux subtracted in 100 components = 0.550329 Jy ! Clean residual min=-0.020874 max=0.051803 Jy/beam ! Clean residual mean=0.000242 rms=0.005870 Jy/beam ! Combined flux in latest and established models = 0.550329 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.550328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327510Jy sigma=0.001570 ! Fit after self-cal, rms=0.327136Jy sigma=0.001569 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583728 Jy ! Component: 100 - total flux cleaned = 0.0902473 Jy ! Total flux subtracted in 100 components = 0.0902473 Jy ! Clean residual min=-0.016081 max=0.027901 Jy/beam ! Clean residual mean=0.000138 rms=0.004097 Jy/beam ! Combined flux in latest and established models = 0.640576 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.640576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311630Jy sigma=0.001388 ! Fit after self-cal, rms=0.311154Jy sigma=0.001387 ! Inverting map ! Added new window around map position (3, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264427 Jy ! Component: 100 - total flux cleaned = 0.0418894 Jy ! Total flux subtracted in 100 components = 0.0418894 Jy ! Clean residual min=-0.015316 max=0.020638 Jy/beam ! Clean residual mean=0.000086 rms=0.003609 Jy/beam ! Combined flux in latest and established models = 0.682465 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.682465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308376Jy sigma=0.001346 ! Fit after self-cal, rms=0.308031Jy sigma=0.001344 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=9.616 mas, bpa=-8.25 degrees ! Estimated noise=778.145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208159 Jy ! Component: 100 - total flux cleaned = 0.0305655 Jy ! Component: 150 - total flux cleaned = 0.0360227 Jy ! Component: 200 - total flux cleaned = 0.0392286 Jy ! Total flux subtracted in 200 components = 0.0392286 Jy ! Clean residual min=-0.009884 max=0.009909 Jy/beam ! Clean residual mean=0.000305 rms=0.002912 Jy/beam ! Combined flux in latest and established models = 0.721694 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.721694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307206Jy sigma=0.001328 ! Fit after self-cal, rms=0.306999Jy sigma=0.001326 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.97 GG 1.00* HN 0.82 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.18 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.25 WZ 1.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 GG 1.00* HN 1.01 ! KK 1.03 KP 0.97 LA 1.01 MA 0.86 ! MC 1.38 MK 0.90 NL 0.90 ON 0.96 ! OV 0.91 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.82 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 1.01 GG 1.00* HN 1.00* ! KK 1.00* KP 0.98 LA 1.01 MA 1.00* ! MC 1.00* MK 1.00* NL 1.11 ON 1.00* ! OV 0.78 PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 1.00* GG 1.00* HN 1.00* ! KK 1.17 KP 1.02 LA 1.00* MA 1.00* ! MC 1.00* MK 0.93 NL 1.00* ON 1.00* ! OV 0.98 PT 1.00* SC 1.00* TC 1.00* ! TS 0.95 WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.96 GG 1.00* HN 1.00 ! KK 1.00* KP 0.97 LA 1.07 MA 1.24 ! MC 0.90 MK 1.00* NL 0.96 ON 0.99 ! OV 1.00* PT 1.05 SC 0.90 TC 1.00* ! TS 1.00* WF 0.90 WZ 1.08 ! ! A total of 198 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* GG 1.00* HN 0.90 ! KK 1.00* KP 1.00* LA 1.00* MA 1.50 ! MC 0.91 MK 1.00* NL 1.00* ON 0.99 ! OV 1.00* PT 1.00* SC 0.99 TC 1.00* ! TS 1.00* WF 1.00* WZ 0.97 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.08 GG 1.00* HN 0.90 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.04 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.91 WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.02 GG 1.00* HN 1.03 ! KK 1.05 KP 0.99 LA 0.95 MA 0.90 ! MC 1.01 MK 0.96 NL 0.95 ON 1.29 ! OV 1.02 PT 0.94 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.91 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.08 GG 1.00* HN 1.00* ! KK 1.00* KP 0.94 LA 0.95 MA 1.00* ! MC 1.00* MK 1.00* NL 1.14 ON 1.00* ! OV 0.94 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.13 FD 1.00* GG 1.00* HN 1.00* ! KK 1.01 KP 1.08 LA 1.00* MA 1.00* ! MC 1.00* MK 0.98 NL 1.00* ON 1.00* ! OV 1.04 PT 1.00* SC 1.00* TC 1.00* ! TS 0.96 WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00 GG 1.00* HN 0.97 ! KK 1.00* KP 1.00 LA 1.02 MA 1.06 ! MC 0.98 MK 1.00* NL 1.01 ON 1.06 ! OV 1.00* PT 1.03 SC 0.89 TC 1.00* ! TS 1.00* WF 0.93 WZ 1.09 ! ! A total of 201 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* GG 1.00* HN 1.08 ! KK 1.00* KP 1.00* LA 1.00* MA 1.10 ! MC 1.02 MK 1.00* NL 1.00* ON 1.03 ! OV 1.00* PT 1.00* SC 0.94 TC 1.00* ! TS 1.00* WF 1.00* WZ 0.89 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 GG 1.00* HN 1.08 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.10 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.06 WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 GG 1.00* HN 1.07 ! KK 1.19 KP 1.02 LA 0.98 MA 0.93 ! MC 1.03 MK 0.93 NL 0.94 ON 1.07 ! OV 1.01 PT 0.99 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 1.00 GG 1.00* HN 1.00* ! KK 1.00* KP 0.99 LA 0.98 MA 1.00* ! MC 1.00* MK 1.00* NL 1.16 ON 1.00* ! OV 0.88 PT 1.02 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.07 FD 1.00* GG 1.00* HN 1.00* ! KK 0.98 KP 1.11 LA 1.00* MA 1.00* ! MC 1.00* MK 0.99 NL 1.00* ON 1.00* ! OV 1.01 PT 1.00* SC 1.00* TC 1.00* ! TS 0.95 WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.96 GG 1.00* HN 1.00 ! KK 1.00* KP 1.01 LA 1.03 MA 0.92 ! MC 1.15 MK 1.00* NL 1.01 ON 1.14 ! OV 1.00* PT 1.06 SC 1.05 TC 1.00* ! TS 1.00* WF 0.93 WZ 1.10 ! ! A total of 201 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* GG 1.00* HN 1.03 ! KK 1.00* KP 1.00* LA 1.00* MA 1.03 ! MC 1.09 MK 1.00* NL 1.00* ON 1.12 ! OV 1.00* PT 1.00* SC 1.05 TC 1.00* ! TS 1.00* WF 1.00* WZ 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.05 GG 1.00* HN 0.81 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.82 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 0.80 WZ 1.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 GG 1.00* HN 1.11 ! KK 1.20 KP 0.98 LA 0.97 MA 0.81 ! MC 0.94 MK 0.99 NL 0.90 ON 0.91 ! OV 0.97 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.30 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.03 GG 1.00* HN 1.00* ! KK 1.00* KP 0.97 LA 0.95 MA 1.00* ! MC 1.00* MK 1.00* NL 1.08 ON 1.00* ! OV 0.80 PT 0.96 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 1.00* GG 1.00* HN 1.00* ! KK 1.00 KP 1.08 LA 1.00* MA 1.00* ! MC 1.00* MK 0.98 NL 1.00* ON 1.00* ! OV 0.90 PT 1.00* SC 1.00* TC 1.00* ! TS 0.96 WF 1.00* WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.96 GG 1.00* HN 1.67 ! KK 1.00* KP 0.99 LA 1.03 MA 1.02 ! MC 0.91 MK 1.00* NL 0.96 ON 1.04 ! OV 1.00* PT 1.00 SC 1.04 TC 1.00* ! TS 1.00* WF 0.93 WZ 1.06 ! ! A total of 201 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* GG 1.00* HN 0.79 ! KK 1.00* KP 1.00* LA 1.00* MA 0.95 ! MC 0.99 MK 1.00* NL 1.00* ON 0.99 ! OV 1.00* PT 1.00* SC 1.08 TC 1.00* ! TS 1.00* WF 1.00* WZ 0.95 ! ! ! Fit before self-cal, rms=0.306999Jy sigma=0.001326 ! Fit after self-cal, rms=0.315526Jy sigma=0.001270 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=10.7 mas, bpa=-9.003 degrees ! Estimated noise=806.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307324 Jy ! Component: 100 - total flux cleaned = -0.00364731 Jy ! Component: 150 - total flux cleaned = -0.00421813 Jy ! Component: 200 - total flux cleaned = -0.00456281 Jy ! Total flux subtracted in 200 components = -0.00456281 Jy ! Clean residual min=-0.006475 max=0.009780 Jy/beam ! Clean residual mean=0.000093 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 0.717131 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.717131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315264Jy sigma=0.001268 ! Fit after self-cal, rms=0.315953Jy sigma=0.001267 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315953Jy sigma=0.001267 ! Fit after self-cal, rms=0.318360Jy sigma=0.001266 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.332 mas, bmaj=10.7 mas, bpa=-9.004 degrees ! Estimated noise=805.763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017893 Jy ! Component: 100 - total flux cleaned = -0.00222216 Jy ! Component: 150 - total flux cleaned = -0.00276411 Jy ! Component: 200 - total flux cleaned = -0.00302535 Jy ! Total flux subtracted in 200 components = -0.00302535 Jy ! Clean residual min=-0.005967 max=0.009395 Jy/beam ! Clean residual mean=0.000100 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.714106 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.714106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318217Jy sigma=0.001265 ! Fit after self-cal, rms=0.318292Jy sigma=0.001265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947374 Jy ! Component: 100 - total flux cleaned = 0.0119416 Jy ! Component: 150 - total flux cleaned = 0.0120834 Jy ! Component: 200 - total flux cleaned = 0.0120882 Jy ! Total flux subtracted in 200 components = 0.0120882 Jy ! Clean residual min=-0.005427 max=0.005470 Jy/beam ! Clean residual mean=-0.000122 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.726194 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.726194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317992Jy sigma=0.001261 ! Fit after self-cal, rms=0.317989Jy sigma=0.001261 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317989Jy sigma=0.001261 ! Fit after self-cal, rms=0.317812Jy sigma=0.001250 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=10.69 mas, bpa=-9.008 degrees ! Estimated noise=805.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378062 Jy ! Component: 100 - total flux cleaned = 0.00496397 Jy ! Component: 150 - total flux cleaned = 0.00532288 Jy ! Component: 200 - total flux cleaned = 0.00563392 Jy ! Total flux subtracted in 200 components = 0.00563392 Jy ! Clean residual min=-0.004300 max=0.004888 Jy/beam ! Clean residual mean=-0.000144 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.731828 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 140 components and 0.731828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317686Jy sigma=0.001248 ! Fit after self-cal, rms=0.317735Jy sigma=0.001248 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014921 Jy ! Component: 100 - total flux cleaned = 0.00177645 Jy ! Component: 150 - total flux cleaned = 0.00185623 Jy ! Component: 200 - total flux cleaned = 0.00193155 Jy ! Total flux subtracted in 200 components = 0.00193155 Jy ! Clean residual min=-0.004563 max=0.004627 Jy/beam ! Clean residual mean=-0.000176 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.733759 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.73376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317686Jy sigma=0.001248 ! Fit after self-cal, rms=0.317690Jy sigma=0.001248 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317690Jy sigma=0.001248 ! Fit after self-cal, rms=0.317319Jy sigma=0.001247 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.261 mas, bmaj=13.89 mas, bpa=-8.192 degrees ! Estimated noise=967.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370088 Jy ! Component: 100 - total flux cleaned = 0.00357651 Jy ! Component: 150 - total flux cleaned = 0.0035811 Jy ! Component: 200 - total flux cleaned = 0.00349616 Jy ! Total flux subtracted in 200 components = 0.00349616 Jy ! Clean residual min=-0.004688 max=0.003889 Jy/beam ! Clean residual mean=-0.000297 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.737256 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 166 components and 0.737256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317306Jy sigma=0.001247 ! Fit after self-cal, rms=0.317302Jy sigma=0.001247 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109446 Jy ! Component: 100 - total flux cleaned = 0.00109188 Jy ! Component: 150 - total flux cleaned = 0.00101943 Jy ! Component: 200 - total flux cleaned = 0.000896305 Jy ! Total flux subtracted in 200 components = 0.000896305 Jy ! Clean residual min=-0.004473 max=0.003411 Jy/beam ! Clean residual mean=-0.000326 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.738152 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 170 components and 0.738152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317301Jy sigma=0.001246 ! Fit after self-cal, rms=0.317296Jy sigma=0.001246 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.341 mas, bmaj=10.68 mas, bpa=-9.011 degrees ! Estimated noise=804.753 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.341 x 10.68 at -9.011 degrees (North through East) ! Clean map min=-0.0041397 max=0.57484 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317296Jy sigma=0.001246 ! Fit after self-cal, rms=2.315273Jy sigma=0.001116 ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=10.69 mas, bpa=-9.012 degrees ! Estimated noise=803.342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903168 Jy ! Component: 100 - total flux cleaned = 0.0009803 Jy ! Component: 150 - total flux cleaned = 0.00105376 Jy ! Component: 200 - total flux cleaned = 0.00111998 Jy ! Total flux subtracted in 200 components = 0.00111998 Jy ! Clean residual min=-0.003661 max=0.004011 Jy/beam ! Clean residual mean=-0.000105 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.739272 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 191 components and 0.739272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.315269Jy sigma=0.001116 ! Fit after self-cal, rms=2.315706Jy sigma=0.001116 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662743 Jy ! Component: 100 - total flux cleaned = 0.000720093 Jy ! Component: 150 - total flux cleaned = 0.000719703 Jy ! Component: 200 - total flux cleaned = 0.000771194 Jy ! Total flux subtracted in 200 components = 0.000771194 Jy ! Clean residual min=-0.003616 max=0.003815 Jy/beam ! Clean residual mean=-0.000118 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.740043 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 198 components and 0.740043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.315696Jy sigma=0.001116 ! Fit after self-cal, rms=2.315723Jy sigma=0.001116 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.315723Jy sigma=0.001116 ! Fit after self-cal, rms=1.683430Jy sigma=0.001116 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.917 mas, bmaj=8.908 mas, bpa=-9.651 degrees ! Estimated noise=1258.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.436425 Jy ! Component: 100 - total flux cleaned = 0.550426 Jy ! Component: 150 - total flux cleaned = 0.60615 Jy ! Component: 200 - total flux cleaned = 0.639152 Jy ! Total flux subtracted in 200 components = 0.639152 Jy ! Clean residual min=-0.008035 max=0.016887 Jy/beam ! Clean residual mean=0.000154 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 0.639152 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.639152 Jy ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=10.68 mas, bpa=-9.019 degrees ! Estimated noise=803.101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375309 Jy ! Component: 100 - total flux cleaned = 0.0588416 Jy ! Component: 150 - total flux cleaned = 0.0725321 Jy ! Component: 200 - total flux cleaned = 0.0816836 Jy ! Total flux subtracted in 200 components = 0.0816836 Jy ! Clean residual min=-0.004810 max=0.008435 Jy/beam ! Clean residual mean=0.000247 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.720836 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 76 components and 0.720836 Jy ! Inverting map ! Added new window around map position (6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00787904 Jy ! Component: 100 - total flux cleaned = 0.0125288 Jy ! Component: 150 - total flux cleaned = 0.0150005 Jy ! Component: 200 - total flux cleaned = 0.0162416 Jy ! Total flux subtracted in 200 components = 0.0162416 Jy ! Clean residual min=-0.003968 max=0.004140 Jy/beam ! Clean residual mean=-0.000052 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.737077 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 111 components and 0.737077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.256 mas, bmaj=13.89 mas, bpa=-7.983 degrees ! Estimated noise=965.582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266052 Jy ! Component: 100 - total flux cleaned = 0.00282493 Jy ! Component: 150 - total flux cleaned = 0.00289979 Jy ! Component: 200 - total flux cleaned = 0.00296713 Jy ! Total flux subtracted in 200 components = 0.00296713 Jy ! Clean residual min=-0.003935 max=0.002926 Jy/beam ! Clean residual mean=-0.000200 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.740044 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42664e-06 Jy ! Component: 100 - total flux cleaned = 2.22268e-06 Jy ! Component: 150 - total flux cleaned = -4.53793e-05 Jy ! Component: 200 - total flux cleaned = -4.42685e-05 Jy ! Total flux subtracted in 200 components = -4.42685e-05 Jy ! Clean residual min=-0.003826 max=0.002463 Jy/beam ! Clean residual mean=-0.000196 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.74 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 148 components and 0.74 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=10.68 mas, bpa=-9.019 degrees ! Estimated noise=803.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000411706 Jy ! Component: 100 - total flux cleaned = -0.000175686 Jy ! Component: 150 - total flux cleaned = -0.000178391 Jy ! Component: 200 - total flux cleaned = -0.000243003 Jy ! Total flux subtracted in 200 components = -0.000243003 Jy ! Clean residual min=-0.003747 max=0.003046 Jy/beam ! Clean residual mean=-0.000094 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.739757 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 165 components and 0.739757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.683404Jy sigma=0.001115 ! Fit after self-cal, rms=1.684192Jy sigma=0.001115 wmodel J1513-1012_S_2003_05_07_pus_map.mod ! Writing 165 model components to file: J1513-1012_S_2003_05_07_pus_map.mod wobs J1513-1012_S_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2003_05_07_pus_uvs.fits wwins J1513-1012_S_2003_05_07_pus_map.win ! wwins: Wrote 4 windows to J1513-1012_S_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149944 Jy ! Component: 100 - total flux cleaned = -0.00218713 Jy ! Component: 150 - total flux cleaned = -0.00294045 Jy ! Component: 200 - total flux cleaned = -0.00370745 Jy ! Component: 250 - total flux cleaned = -0.00410063 Jy ! Component: 300 - total flux cleaned = -0.00452578 Jy ! Component: 350 - total flux cleaned = -0.00493599 Jy ! Component: 400 - total flux cleaned = -0.00533465 Jy ! Component: 450 - total flux cleaned = -0.00550794 Jy ! Component: 500 - total flux cleaned = -0.00576233 Jy ! Component: 550 - total flux cleaned = -0.00592894 Jy ! Component: 600 - total flux cleaned = -0.00605193 Jy ! Component: 650 - total flux cleaned = -0.00609214 Jy ! Component: 700 - total flux cleaned = -0.00609252 Jy ! Component: 750 - total flux cleaned = -0.00605447 Jy ! Component: 800 - total flux cleaned = -0.00609293 Jy ! Component: 850 - total flux cleaned = -0.00605534 Jy ! Component: 900 - total flux cleaned = -0.00609247 Jy ! Component: 950 - total flux cleaned = -0.0060558 Jy ! Component: 1000 - total flux cleaned = -0.00601982 Jy ! Component: 1050 - total flux cleaned = -0.0059844 Jy ! Component: 1100 - total flux cleaned = -0.00598411 Jy ! Component: 1150 - total flux cleaned = -0.00591459 Jy ! Component: 1200 - total flux cleaned = -0.00594911 Jy ! Component: 1250 - total flux cleaned = -0.00601717 Jy ! Component: 1300 - total flux cleaned = -0.00608375 Jy ! Component: 1350 - total flux cleaned = -0.00605042 Jy ! Component: 1400 - total flux cleaned = -0.00605042 Jy ! Component: 1450 - total flux cleaned = -0.00608339 Jy ! Component: 1500 - total flux cleaned = -0.00614801 Jy ! Component: 1550 - total flux cleaned = -0.00617974 Jy ! Component: 1600 - total flux cleaned = -0.00618019 Jy ! Component: 1650 - total flux cleaned = -0.00627465 Jy ! Component: 1700 - total flux cleaned = -0.00636791 Jy ! Component: 1750 - total flux cleaned = -0.00639859 Jy ! Component: 1800 - total flux cleaned = -0.00636812 Jy ! Component: 1850 - total flux cleaned = -0.00649001 Jy ! Component: 1900 - total flux cleaned = -0.00652026 Jy ! Component: 1950 - total flux cleaned = -0.00652071 Jy ! Component: 2000 - total flux cleaned = -0.00660997 Jy ! Total flux subtracted in 2048 components = -0.00663949 Jy ! Clean residual min=-0.001551 max=0.001596 Jy/beam ! Clean residual mean=-0.000028 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.733118 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 299 components and 0.733118 Jy wmap "J1513-1012_S_2003_05_07_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.342 x 10.68 at -9.019 degrees (North through East) ! Clean map min=-0.0033566 max=0.57375 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.573747 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000590125 device "J1513-1012_S_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1513-1012_S_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.308564 0.308564 0.617128 1.23426 2.46851 4.93702 9.87404 19.7481 39.4962 78.9923 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.573 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.342 x 10.68 at -9.019 degrees (North through East) ! Clean map min=-0.0033566 max=0.57375 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1513-1012_S_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1513-1012_S_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1513-1012_S_2003_05_07_pus_uvs.log closed on Sun Dec 24 11:14:13 2006