! Started logfile: J1427-4206_X_2003_05_07_pus_uvs.log on Thu Dec 14 15:51:47 2006 obs J1427-4206_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1427-4206_X_2003_05_07_pus_uva.fits ! AN table 1: 363 integrations on 171 of 171 possible baselines. ! AN table 2: 80 integrations on 171 of 171 possible baselines. ! AN table 3: 343 integrations on 171 of 171 possible baselines. ! AN table 4: 13 integrations on 171 of 171 possible baselines. ! AN table 5: 30 integrations on 171 of 171 possible baselines. ! AN table 6: 11 integrations on 171 of 171 possible baselines. ! AN table 7: 58 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.012829 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1427-4206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1739 lines of history. ! ! Reading 7880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 256 float field_cell field_cell = 0.2 float taper_size taper_size = 70. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6300 telescope corrections were flagged in sub-array 1. ! A total of 1309 telescope corrections were flagged in sub-array 2. ! A total of 6517 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 447 telescope corrections were flagged in sub-array 5. ! A total of 209 telescope corrections were flagged in sub-array 6. ! A total of 928 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 6300 telescope corrections were flagged in sub-array 1. ! A total of 1309 telescope corrections were flagged in sub-array 2. ! A total of 6517 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 447 telescope corrections were flagged in sub-array 5. ! A total of 209 telescope corrections were flagged in sub-array 6. ! A total of 928 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 6300 telescope corrections were flagged in sub-array 1. ! A total of 1309 telescope corrections were flagged in sub-array 2. ! A total of 6517 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 447 telescope corrections were flagged in sub-array 5. ! A total of 209 telescope corrections were flagged in sub-array 6. ! A total of 928 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 6300 telescope corrections were flagged in sub-array 1. ! A total of 1309 telescope corrections were flagged in sub-array 2. ! A total of 6517 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 447 telescope corrections were flagged in sub-array 5. ! A total of 209 telescope corrections were flagged in sub-array 6. ! A total of 928 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.265064Jy sigma=0.006757 ! Fit after self-cal, rms=0.855423Jy sigma=0.005485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 16.3% of the data. ! The y-axis pixel size should ideally be below 0.1844 milli-arcsec ! Estimated beam: bmin=0.5935 mas, bmaj=1.101 mas, bpa=11.72 degrees ! Estimated noise=3079.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18014 Jy ! Component: 100 - total flux cleaned = 1.51247 Jy ! Total flux subtracted in 100 components = 1.51247 Jy ! Clean residual min=-0.093285 max=0.166725 Jy/beam ! Clean residual mean=0.002005 rms=0.034903 Jy/beam ! Combined flux in latest and established models = 1.51247 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.51247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532731Jy sigma=0.002907 ! Fit after self-cal, rms=0.532776Jy sigma=0.002906 ! Inverting map ! Your choice of large map pixels excluded 16.3% of the data. ! The y-axis pixel size should ideally be below 0.1844 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 16.3% of the data. ! The y-axis pixel size should ideally be below 0.1844 milli-arcsec ! Estimated beam: bmin=0.8122 mas, bmaj=1.315 mas, bpa=27.27 degrees ! Estimated noise=1598.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252334 Jy ! Component: 100 - total flux cleaned = 0.325102 Jy ! Component: 150 - total flux cleaned = 0.351575 Jy ! Component: 200 - total flux cleaned = 0.361867 Jy ! Total flux subtracted in 200 components = 0.361867 Jy ! Clean residual min=-0.096032 max=0.136062 Jy/beam ! Clean residual mean=-0.003033 rms=0.038162 Jy/beam ! Combined flux in latest and established models = 1.87434 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 1.87434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452985Jy sigma=0.001982 ! Fit after self-cal, rms=0.453210Jy sigma=0.001982 ! Inverting map ! Your choice of large map pixels excluded 16.3% of the data. ! The y-axis pixel size should ideally be below 0.1844 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 597 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.95 GG 1.00* HN 1.00* ! KK 1.00* KP 1.11 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.42 ON 1.00* ! OV 1.00* PT 0.97 SC 0.89 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00 GG 1.00* HN 1.00* ! KK 1.00* KP 1.08 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.34 ON 1.00* ! OV 1.00* PT 1.00* SC 0.84 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.96 GG 1.00* HN 1.00* ! KK 1.00* KP 1.07 LA 0.98 MA 1.00* ! MC 1.00* MK 0.96 NL 1.46 ON 1.00* ! OV 1.05 PT 1.01 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 597 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.95 GG 1.00* HN 1.00* ! KK 1.00* KP 1.02 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.36 ON 1.00* ! OV 1.00* PT 1.01 SC 0.85 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.93 GG 1.00* HN 1.00* ! KK 1.00* KP 0.99 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.25 ON 1.00* ! OV 1.00* PT 1.00* SC 0.88 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.95 GG 1.00* HN 1.00* ! KK 1.00* KP 1.01 LA 1.00 MA 1.00* ! MC 1.00* MK 0.96 NL 1.44 ON 1.00* ! OV 1.04 PT 1.04 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 597 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.93 GG 1.00* HN 1.00* ! KK 1.00* KP 0.96 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.30 ON 1.00* ! OV 1.00* PT 1.02 SC 0.85 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.92 GG 1.00* HN 1.00* ! KK 1.00* KP 0.95 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.30 ON 1.00* ! OV 1.00* PT 1.00* SC 0.87 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.94 GG 1.00* HN 1.00* ! KK 1.00* KP 0.92 LA 0.99 MA 1.00* ! MC 1.00* MK 0.95 NL 1.36 ON 1.00* ! OV 1.06 PT 1.07 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 597 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.91 GG 1.00* HN 1.00* ! KK 1.00* KP 1.03 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.31 ON 1.00* ! OV 1.00* PT 1.03 SC 0.88 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.95 GG 1.00* HN 1.00* ! KK 1.00* KP 1.02 LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.27 ON 1.00* ! OV 1.00* PT 1.00* SC 0.85 TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.91 GG 1.00* HN 1.00* ! KK 1.00* KP 1.00 LA 0.96 MA 1.00* ! MC 1.00* MK 0.98 NL 1.39 ON 1.00* ! OV 1.06 PT 1.07 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.453210Jy sigma=0.001982 ! Fit after self-cal, rms=0.170624Jy sigma=0.001261 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=3.087 mas, bpa=-5.026 degrees ! Estimated noise=1769.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500523 Jy ! Component: 100 - total flux cleaned = -0.000310847 Jy ! Component: 150 - total flux cleaned = -0.000133036 Jy ! Component: 200 - total flux cleaned = 3.90846e-05 Jy ! Total flux subtracted in 200 components = 3.90846e-05 Jy ! Clean residual min=-0.019745 max=0.038411 Jy/beam ! Clean residual mean=0.000212 rms=0.008063 Jy/beam ! Combined flux in latest and established models = 1.87438 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 1.87438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170244Jy sigma=0.001258 ! Fit after self-cal, rms=0.171046Jy sigma=0.001257 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171046Jy sigma=0.001257 ! Fit after self-cal, rms=0.169167Jy sigma=0.001230 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8834 mas, bmaj=3.074 mas, bpa=-5.064 degrees ! Estimated noise=1768.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146034 Jy ! Component: 100 - total flux cleaned = 0.00178665 Jy ! Component: 150 - total flux cleaned = 0.00189473 Jy ! Component: 200 - total flux cleaned = 0.00209897 Jy ! Total flux subtracted in 200 components = 0.00209897 Jy ! Clean residual min=-0.019031 max=0.037508 Jy/beam ! Clean residual mean=0.000380 rms=0.007598 Jy/beam ! Combined flux in latest and established models = 1.87648 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 19 components and 1.87648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169023Jy sigma=0.001228 ! Fit after self-cal, rms=0.169030Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029149 Jy ! Component: 100 - total flux cleaned = 0.0308963 Jy ! Component: 150 - total flux cleaned = 0.0312506 Jy ! Component: 200 - total flux cleaned = 0.0312423 Jy ! Total flux subtracted in 200 components = 0.0312423 Jy ! Clean residual min=-0.013688 max=0.016203 Jy/beam ! Clean residual mean=0.000054 rms=0.004596 Jy/beam ! Combined flux in latest and established models = 1.90772 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 1.90772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162957Jy sigma=0.001186 ! Fit after self-cal, rms=0.162437Jy sigma=0.001182 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162437Jy sigma=0.001182 ! Fit after self-cal, rms=0.159946Jy sigma=0.001173 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=3.06 mas, bpa=-5.083 degrees ! Estimated noise=1763.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119662 Jy ! Component: 100 - total flux cleaned = 0.0124073 Jy ! Component: 150 - total flux cleaned = 0.0122568 Jy ! Component: 200 - total flux cleaned = 0.01199 Jy ! Total flux subtracted in 200 components = 0.01199 Jy ! Clean residual min=-0.010221 max=0.008665 Jy/beam ! Clean residual mean=0.000048 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 1.91971 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 1.91971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158885Jy sigma=0.001165 ! Fit after self-cal, rms=0.158747Jy sigma=0.001164 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323232 Jy ! Component: 100 - total flux cleaned = 0.0028954 Jy ! Component: 150 - total flux cleaned = 0.0027941 Jy ! Component: 200 - total flux cleaned = 0.0026994 Jy ! Total flux subtracted in 200 components = 0.0026994 Jy ! Clean residual min=-0.009344 max=0.008136 Jy/beam ! Clean residual mean=0.000017 rms=0.003212 Jy/beam ! Combined flux in latest and established models = 1.92241 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 1.92241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158521Jy sigma=0.001163 ! Fit after self-cal, rms=0.158484Jy sigma=0.001163 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158484Jy sigma=0.001163 ! Fit after self-cal, rms=0.157902Jy sigma=0.001161 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=8.911 mas, bpa=-3.061 degrees ! Estimated noise=2256.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344351 Jy ! Component: 100 - total flux cleaned = 0.00343085 Jy ! Component: 150 - total flux cleaned = 0.00353107 Jy ! Component: 200 - total flux cleaned = 0.00357395 Jy ! Total flux subtracted in 200 components = 0.00357395 Jy ! Clean residual min=-0.010076 max=0.011183 Jy/beam ! Clean residual mean=0.000052 rms=0.004240 Jy/beam ! Combined flux in latest and established models = 1.92599 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 1.92598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157783Jy sigma=0.001160 ! Fit after self-cal, rms=0.157729Jy sigma=0.001160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166976 Jy ! Component: 100 - total flux cleaned = 0.0018374 Jy ! Component: 150 - total flux cleaned = 0.00191951 Jy ! Component: 200 - total flux cleaned = 0.00187817 Jy ! Total flux subtracted in 200 components = 0.00187817 Jy ! Clean residual min=-0.010046 max=0.011512 Jy/beam ! Clean residual mean=0.000011 rms=0.004330 Jy/beam ! Combined flux in latest and established models = 1.92786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 1.92786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157710Jy sigma=0.001160 ! Fit after self-cal, rms=0.157685Jy sigma=0.001160 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=3.056 mas, bpa=-5.092 degrees ! Estimated noise=1762.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8805 x 3.056 at -5.092 degrees (North through East) ! Clean map min=-0.0089917 max=1.7736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157685Jy sigma=0.001160 ! Fit after self-cal, rms=0.133499Jy sigma=0.000962 ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=3.056 mas, bpa=-5.082 degrees ! Estimated noise=1761.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231436 Jy ! Component: 100 - total flux cleaned = 0.00231696 Jy ! Component: 150 - total flux cleaned = 0.00231719 Jy ! Component: 200 - total flux cleaned = 0.0022589 Jy ! Total flux subtracted in 200 components = 0.0022589 Jy ! Clean residual min=-0.009864 max=0.006696 Jy/beam ! Clean residual mean=-0.000050 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 1.93012 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 1.93012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133409Jy sigma=0.000961 ! Fit after self-cal, rms=0.133402Jy sigma=0.000961 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476385 Jy ! Component: 100 - total flux cleaned = 0.000588284 Jy ! Component: 150 - total flux cleaned = 0.000537454 Jy ! Component: 200 - total flux cleaned = 0.000448089 Jy ! Total flux subtracted in 200 components = 0.000448089 Jy ! Clean residual min=-0.009556 max=0.006688 Jy/beam ! Clean residual mean=-0.000054 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 1.93057 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 1.93057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133350Jy sigma=0.000961 ! Fit after self-cal, rms=0.133346Jy sigma=0.000961 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133346Jy sigma=0.000961 ! Fit after self-cal, rms=0.133247Jy sigma=0.000961 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7447 mas, bmaj=2.697 mas, bpa=-15.47 degrees ! Estimated noise=2514.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37285 Jy ! Component: 100 - total flux cleaned = 1.67403 Jy ! Component: 150 - total flux cleaned = 1.76921 Jy ! Component: 200 - total flux cleaned = 1.82366 Jy ! Total flux subtracted in 200 components = 1.82366 Jy ! Clean residual min=-0.022872 max=0.041874 Jy/beam ! Clean residual mean=0.000921 rms=0.009418 Jy/beam ! Combined flux in latest and established models = 1.82366 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.82365 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8807 mas, bmaj=3.056 mas, bpa=-5.084 degrees ! Estimated noise=1761.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480642 Jy ! Component: 100 - total flux cleaned = 0.074432 Jy ! Component: 150 - total flux cleaned = 0.0898044 Jy ! Component: 200 - total flux cleaned = 0.0944353 Jy ! Total flux subtracted in 200 components = 0.0944353 Jy ! Clean residual min=-0.014616 max=0.017147 Jy/beam ! Clean residual mean=0.000077 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 1.91809 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 1.91809 Jy ! Inverting map ! Added new window around map position (-0.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117595 Jy ! Component: 100 - total flux cleaned = 0.0142474 Jy ! Component: 150 - total flux cleaned = 0.0144681 Jy ! Component: 200 - total flux cleaned = 0.0142846 Jy ! Total flux subtracted in 200 components = 0.0142846 Jy ! Clean residual min=-0.010874 max=0.007221 Jy/beam ! Clean residual mean=-0.000097 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 1.93237 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 1.93237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=8.902 mas, bpa=-3.057 degrees ! Estimated noise=2255.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743917 Jy ! Component: 100 - total flux cleaned = -0.000741069 Jy ! Component: 150 - total flux cleaned = -0.000743985 Jy ! Component: 200 - total flux cleaned = -0.000750271 Jy ! Total flux subtracted in 200 components = -0.000750271 Jy ! Clean residual min=-0.009108 max=0.009037 Jy/beam ! Clean residual mean=-0.000149 rms=0.003773 Jy/beam ! Combined flux in latest and established models = 1.93162 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168859 Jy ! Component: 100 - total flux cleaned = -0.000326904 Jy ! Component: 150 - total flux cleaned = -0.000475657 Jy ! Component: 200 - total flux cleaned = -0.000615038 Jy ! Total flux subtracted in 200 components = -0.000615038 Jy ! Clean residual min=-0.008745 max=0.009188 Jy/beam ! Clean residual mean=-0.000131 rms=0.003714 Jy/beam ! Combined flux in latest and established models = 1.93101 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 1.93101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8807 mas, bmaj=3.056 mas, bpa=-5.084 degrees ! Estimated noise=1761.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161367 Jy ! Component: 100 - total flux cleaned = 0.000286546 Jy ! Component: 150 - total flux cleaned = 0.000393901 Jy ! Component: 200 - total flux cleaned = 0.000300429 Jy ! Total flux subtracted in 200 components = 0.000300429 Jy ! Clean residual min=-0.009569 max=0.007278 Jy/beam ! Clean residual mean=-0.000065 rms=0.002384 Jy/beam ! Combined flux in latest and established models = 1.93131 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 1.93131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133483Jy sigma=0.000961 ! Fit after self-cal, rms=0.133350Jy sigma=0.000961 wmodel J1427-4206_X_2003_05_07_pus_map.mod ! Writing 81 model components to file: J1427-4206_X_2003_05_07_pus_map.mod wobs J1427-4206_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1427-4206_X_2003_05_07_pus_uvs.fits wwins J1427-4206_X_2003_05_07_pus_map.win ! wwins: Wrote 3 windows to J1427-4206_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386906 Jy ! Component: 100 - total flux cleaned = -0.00423977 Jy ! Component: 150 - total flux cleaned = -0.00413751 Jy ! Component: 200 - total flux cleaned = -0.0040411 Jy ! Component: 250 - total flux cleaned = -0.00412309 Jy ! Component: 300 - total flux cleaned = -0.00404655 Jy ! Component: 350 - total flux cleaned = -0.00411484 Jy ! Component: 400 - total flux cleaned = -0.00424467 Jy ! Component: 450 - total flux cleaned = -0.00443063 Jy ! Component: 500 - total flux cleaned = -0.00460549 Jy ! Component: 550 - total flux cleaned = -0.00482759 Jy ! Component: 600 - total flux cleaned = -0.00503958 Jy ! Component: 650 - total flux cleaned = -0.00529691 Jy ! Component: 700 - total flux cleaned = -0.00554635 Jy ! Component: 750 - total flux cleaned = -0.00583601 Jy ! Component: 800 - total flux cleaned = -0.00611628 Jy ! Component: 850 - total flux cleaned = -0.00643447 Jy ! Component: 900 - total flux cleaned = -0.00674259 Jy ! Component: 950 - total flux cleaned = -0.00704135 Jy ! Component: 1000 - total flux cleaned = -0.00741606 Jy ! Total flux subtracted in 1024 components = -0.00757963 Jy ! Clean residual min=-0.002646 max=0.002382 Jy/beam ! Clean residual mean=-0.000084 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 1.92373 Jy keep ! Adding 51 model components to the UV plane model. ! The established model now contains 132 components and 1.92373 Jy wmap "J1427-4206_X_2003_05_07_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8807 x 3.056 at -5.084 degrees (North through East) ! Clean map min=-0.0064683 max=1.7771 Jy/beam ! Writing clean map to FITS file: J1427-4206_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.77713 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000941315 device "J1427-4206_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1427-4206_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.158905 0.158905 0.31781 0.635621 1.27124 2.54248 5.08496 10.1699 20.3399 40.6797 81.3594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.777 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8807 x 3.056 at -5.084 degrees (North through East) ! Clean map min=-0.0064683 max=1.7771 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1427-4206_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1427-4206_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1427-4206_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 15:54:44 2006