! Started logfile: J1337-1257_X_2003_05_07_pus_uvs.log on Thu Dec 14 15:46:11 2006 obs J1337-1257_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1337-1257_X_2003_05_07_pus_uva.fits ! AN table 1: 34 integrations on 171 of 171 possible baselines. ! AN table 2: 83 integrations on 171 of 171 possible baselines. ! AN table 3: 26 integrations on 171 of 171 possible baselines. ! AN table 4: 184 integrations on 171 of 171 possible baselines. ! AN table 5: 47 integrations on 171 of 171 possible baselines. ! AN table 6: 37 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0594328 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1337-1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1739 lines of history. ! ! Reading 16708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 256 float field_cell field_cell = 0.2 float taper_size taper_size = 70. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 1124 telescope corrections were flagged in sub-array 2. ! A total of 458 telescope corrections were flagged in sub-array 3. ! A total of 2864 telescope corrections were flagged in sub-array 4. ! A total of 860 telescope corrections were flagged in sub-array 5. ! A total of 511 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 1124 telescope corrections were flagged in sub-array 2. ! A total of 458 telescope corrections were flagged in sub-array 3. ! A total of 2864 telescope corrections were flagged in sub-array 4. ! A total of 860 telescope corrections were flagged in sub-array 5. ! A total of 511 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 1124 telescope corrections were flagged in sub-array 2. ! A total of 458 telescope corrections were flagged in sub-array 3. ! A total of 2864 telescope corrections were flagged in sub-array 4. ! A total of 860 telescope corrections were flagged in sub-array 5. ! A total of 511 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 1124 telescope corrections were flagged in sub-array 2. ! A total of 458 telescope corrections were flagged in sub-array 3. ! A total of 2867 telescope corrections were flagged in sub-array 4. ! A total of 860 telescope corrections were flagged in sub-array 5. ! A total of 511 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=2.067796Jy sigma=0.016965 ! Fit after self-cal, rms=1.786448Jy sigma=0.015182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.5776 mas, bmaj=0.9732 mas, bpa=-9.67 degrees ! Estimated noise=1554.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.00653 Jy ! Component: 100 - total flux cleaned = 2.58966 Jy ! Total flux subtracted in 100 components = 2.58966 Jy ! Clean residual min=-0.074154 max=0.217061 Jy/beam ! Clean residual mean=0.002533 rms=0.025956 Jy/beam ! Combined flux in latest and established models = 2.58966 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.58967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.674880Jy sigma=0.004373 ! Fit after self-cal, rms=0.675246Jy sigma=0.004371 ! Inverting map ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218108 Jy ! Component: 100 - total flux cleaned = 0.33137 Jy ! Total flux subtracted in 100 components = 0.33137 Jy ! Clean residual min=-0.068033 max=0.131572 Jy/beam ! Clean residual mean=0.001311 rms=0.018953 Jy/beam ! Combined flux in latest and established models = 2.92104 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 2.92104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601130Jy sigma=0.003095 ! Fit after self-cal, rms=0.600609Jy sigma=0.003092 ! Inverting map ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Added new window around map position (1.4, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118156 Jy ! Component: 100 - total flux cleaned = 0.180614 Jy ! Total flux subtracted in 100 components = 0.180614 Jy ! Clean residual min=-0.063113 max=0.066311 Jy/beam ! Clean residual mean=0.000629 rms=0.016246 Jy/beam ! Combined flux in latest and established models = 3.10165 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 3.10165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.581669Jy sigma=0.002731 ! Fit after self-cal, rms=0.578509Jy sigma=0.002708 ! Inverting map ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7575 mas, bmaj=1.571 mas, bpa=-9.128 degrees ! Estimated noise=797.717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587723 Jy ! Component: 100 - total flux cleaned = 0.0849004 Jy ! Component: 150 - total flux cleaned = 0.0889615 Jy ! Component: 200 - total flux cleaned = 0.0902039 Jy ! Total flux subtracted in 200 components = 0.0902039 Jy ! Clean residual min=-0.046278 max=0.054784 Jy/beam ! Clean residual mean=0.001199 rms=0.012275 Jy/beam ! Combined flux in latest and established models = 3.19185 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 3.19185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575554Jy sigma=0.002615 ! Fit after self-cal, rms=0.574623Jy sigma=0.002608 ! Inverting map ! Your choice of large map pixels excluded 3.16% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 GG 1.00* HN 1.03 ! KK 0.95 KP 1.12 LA 0.96 MA 1.07 ! MC 1.14 MK 0.95 NL 1.07 ON 1.08 ! OV 0.97 PT 0.98 SC 0.97 TC 1.08 ! TS 1.00* WF 1.01 WZ 0.92 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 87 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.97 GG 1.00* HN 1.00 ! KK 1.11 KP 1.07 LA 0.95 MA 1.08 ! MC 1.12 MK 0.97 NL 0.98 ON 1.06 ! OV 1.07 PT 0.96 SC 0.91 TC 1.17 ! TS 1.00* WF 1.00 WZ 0.89 ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00 GG 1.00* HN 0.87 ! KK 1.00* KP 1.11 LA 1.00 MA 1.00* ! MC 1.00* MK 1.00* NL 1.06 ON 1.00* ! OV 1.03 PT 1.01 SC 1.00* TC 1.00* ! TS 1.00* WF 1.06 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 GG 1.00* HN 1.04 ! KK 0.94 KP 1.04 LA 0.97 MA 1.04 ! MC 1.11 MK 0.95 NL 1.02 ON 1.06 ! OV 0.97 PT 1.02 SC 0.92 TC 1.10 ! TS 1.00* WF 1.03 WZ 0.95 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 87 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.97 GG 1.00* HN 1.01 ! KK 1.07 KP 1.01 LA 0.96 MA 1.07 ! MC 1.07 MK 0.97 NL 0.94 ON 1.07 ! OV 1.07 PT 1.00 SC 0.88 TC 1.20 ! TS 1.00* WF 1.02 WZ 0.92 ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.99 GG 1.00* HN 0.89 ! KK 1.00* KP 1.05 LA 1.00 MA 1.00* ! MC 1.00* MK 1.00* NL 1.01 ON 1.00* ! OV 1.04 PT 1.05 SC 1.00* TC 1.00* ! TS 1.00* WF 1.07 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.96 GG 1.00* HN 1.02 ! KK 1.00 KP 0.97 LA 0.98 MA 1.04 ! MC 1.15 MK 0.96 NL 1.00 ON 1.06 ! OV 1.01 PT 1.04 SC 0.93 TC 1.05 ! TS 1.00* WF 0.98 WZ 0.93 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 87 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.96 GG 1.00* HN 1.02 ! KK 1.10 KP 0.94 LA 0.97 MA 1.00 ! MC 1.08 MK 0.98 NL 0.93 ON 1.05 ! OV 1.08 PT 1.02 SC 0.89 TC 1.05 ! TS 1.00* WF 0.97 WZ 0.88 ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.98 GG 1.00* HN 0.88 ! KK 1.00* KP 0.98 LA 1.02 MA 1.00* ! MC 1.00* MK 1.00* NL 0.99 ON 1.00* ! OV 1.08 PT 1.08 SC 1.00* TC 1.00* ! TS 1.00* WF 1.02 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.94 GG 1.00* HN 1.06 ! KK 0.97 KP 1.03 LA 0.96 MA 1.10 ! MC 1.14 MK 0.99 NL 1.02 ON 1.06 ! OV 1.00 PT 1.05 SC 0.99 TC 1.02 ! TS 1.00* WF 0.98 WZ 0.95 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 84 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.95 GG 1.00* HN 1.06 ! KK 1.06 KP 1.00 LA 0.94 MA 1.10 ! MC 1.46 MK 1.01 NL 0.94 ON 1.03 ! OV 1.06 PT 1.02 SC 0.94 TC 1.05 ! TS 1.00* WF 1.00 WZ 0.87 ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.97 GG 1.00* HN 0.90 ! KK 1.00* KP 1.04 LA 0.99 MA 1.00* ! MC 1.00* MK 1.00* NL 1.01 ON 1.00* ! OV 1.08 PT 1.09 SC 1.00* TC 1.00* ! TS 1.00* WF 1.00 WZ 1.00* ! ! ! Fit before self-cal, rms=0.574623Jy sigma=0.002608 ! Fit after self-cal, rms=0.564048Jy sigma=0.001922 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7619 mas, bmaj=1.627 mas, bpa=-9.451 degrees ! Estimated noise=810.208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120628 Jy ! Component: 100 - total flux cleaned = 0.0120248 Jy ! Component: 150 - total flux cleaned = 0.0120349 Jy ! Component: 200 - total flux cleaned = 0.0123486 Jy ! Total flux subtracted in 200 components = 0.0123486 Jy ! Clean residual min=-0.032190 max=0.027405 Jy/beam ! Clean residual mean=0.001002 rms=0.006727 Jy/beam ! Combined flux in latest and established models = 3.2042 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 3.2042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561881Jy sigma=0.001904 ! Fit after self-cal, rms=0.562075Jy sigma=0.001901 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562075Jy sigma=0.001901 ! Fit after self-cal, rms=0.539558Jy sigma=0.001512 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7687 mas, bmaj=1.631 mas, bpa=-9.298 degrees ! Estimated noise=810.588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00720018 Jy ! Component: 100 - total flux cleaned = -0.00777515 Jy ! Component: 150 - total flux cleaned = -0.00776569 Jy ! Component: 200 - total flux cleaned = -0.00823722 Jy ! Total flux subtracted in 200 components = -0.00823722 Jy ! Clean residual min=-0.013030 max=0.017352 Jy/beam ! Clean residual mean=-0.000101 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 3.19596 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 3.19596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.537823Jy sigma=0.001491 ! Fit after self-cal, rms=0.537994Jy sigma=0.001489 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109862 Jy ! Component: 100 - total flux cleaned = 0.00990669 Jy ! Component: 150 - total flux cleaned = 0.00851487 Jy ! Component: 200 - total flux cleaned = 0.00692292 Jy ! Total flux subtracted in 200 components = 0.00692292 Jy ! Clean residual min=-0.011402 max=0.011796 Jy/beam ! Clean residual mean=-0.000252 rms=0.002954 Jy/beam ! Combined flux in latest and established models = 3.20289 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 3.20289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536328Jy sigma=0.001469 ! Fit after self-cal, rms=0.535987Jy sigma=0.001467 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535987Jy sigma=0.001467 ! Fit after self-cal, rms=0.532738Jy sigma=0.001453 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7697 mas, bmaj=1.631 mas, bpa=-9.315 degrees ! Estimated noise=808.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029584 Jy ! Component: 100 - total flux cleaned = -0.00394599 Jy ! Component: 150 - total flux cleaned = -0.00468332 Jy ! Component: 200 - total flux cleaned = -0.00501123 Jy ! Total flux subtracted in 200 components = -0.00501123 Jy ! Clean residual min=-0.009753 max=0.009402 Jy/beam ! Clean residual mean=-0.000068 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 3.19788 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 3.19788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.531299Jy sigma=0.001441 ! Fit after self-cal, rms=0.531051Jy sigma=0.001440 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122861 Jy ! Component: 100 - total flux cleaned = 0.000653647 Jy ! Component: 150 - total flux cleaned = 0.000391897 Jy ! Component: 200 - total flux cleaned = -0.00010953 Jy ! Total flux subtracted in 200 components = -0.00010953 Jy ! Clean residual min=-0.008711 max=0.008604 Jy/beam ! Clean residual mean=-0.000065 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 3.19777 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 3.19777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.530465Jy sigma=0.001435 ! Fit after self-cal, rms=0.530349Jy sigma=0.001434 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.530349Jy sigma=0.001434 ! Fit after self-cal, rms=0.528456Jy sigma=0.001431 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=2.479 mas, bmaj=4.314 mas, bpa=-9.313 degrees ! Estimated noise=973.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00594575 Jy ! Component: 100 - total flux cleaned = -0.00674048 Jy ! Component: 150 - total flux cleaned = -0.00731268 Jy ! Component: 200 - total flux cleaned = -0.00750113 Jy ! Total flux subtracted in 200 components = -0.00750113 Jy ! Clean residual min=-0.007121 max=0.007563 Jy/beam ! Clean residual mean=-0.000044 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 3.19027 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 3.19027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.528123Jy sigma=0.001430 ! Fit after self-cal, rms=0.528091Jy sigma=0.001429 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496487 Jy ! Component: 100 - total flux cleaned = 0.000386124 Jy ! Component: 150 - total flux cleaned = 0.000286155 Jy ! Component: 200 - total flux cleaned = 0.000109101 Jy ! Total flux subtracted in 200 components = 0.000109101 Jy ! Clean residual min=-0.006974 max=0.007602 Jy/beam ! Clean residual mean=-0.000049 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 3.19037 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 3.19037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.528028Jy sigma=0.001429 ! Fit after self-cal, rms=0.528029Jy sigma=0.001429 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7705 mas, bmaj=1.631 mas, bpa=-9.342 degrees ! Estimated noise=806.688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7705 x 1.631 at -9.342 degrees (North through East) ! Clean map min=-0.0088101 max=2.6237 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.528029Jy sigma=0.001429 ! Fit after self-cal, rms=2.544080Jy sigma=0.001144 ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7706 mas, bmaj=1.632 mas, bpa=-9.389 degrees ! Estimated noise=806.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475308 Jy ! Component: 100 - total flux cleaned = -0.00131476 Jy ! Component: 150 - total flux cleaned = -0.00180693 Jy ! Component: 200 - total flux cleaned = -0.00225528 Jy ! Total flux subtracted in 200 components = -0.00225528 Jy ! Clean residual min=-0.006737 max=0.007213 Jy/beam ! Clean residual mean=-0.000014 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 3.18812 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 3.18812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.543859Jy sigma=0.001139 ! Fit after self-cal, rms=2.543917Jy sigma=0.001138 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250373 Jy ! Component: 100 - total flux cleaned = -0.000361134 Jy ! Component: 150 - total flux cleaned = -0.0007469 Jy ! Component: 200 - total flux cleaned = -0.000934608 Jy ! Total flux subtracted in 200 components = -0.000934608 Jy ! Clean residual min=-0.006409 max=0.007301 Jy/beam ! Clean residual mean=0.000007 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 3.18718 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 3.18718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.543789Jy sigma=0.001135 ! Fit after self-cal, rms=2.543819Jy sigma=0.001135 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Added new window around map position (3.4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308807 Jy ! Component: 100 - total flux cleaned = 0.00269157 Jy ! Component: 150 - total flux cleaned = 0.00250627 Jy ! Component: 200 - total flux cleaned = 0.00216071 Jy ! Total flux subtracted in 200 components = 0.00216071 Jy ! Clean residual min=-0.006144 max=0.004906 Jy/beam ! Clean residual mean=-0.000037 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 3.18935 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 3.18935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.543800Jy sigma=0.001133 ! Fit after self-cal, rms=2.543894Jy sigma=0.001132 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.543894Jy sigma=0.001132 ! Fit after self-cal, rms=2.565601Jy sigma=0.001131 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.5844 mas, bmaj=1.021 mas, bpa=-10.91 degrees ! Estimated noise=1586.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01813 Jy ! Component: 100 - total flux cleaned = 2.57982 Jy ! Component: 150 - total flux cleaned = 2.8081 Jy ! Component: 200 - total flux cleaned = 2.94215 Jy ! Total flux subtracted in 200 components = 2.94215 Jy ! Clean residual min=-0.024469 max=0.069118 Jy/beam ! Clean residual mean=0.000976 rms=0.008626 Jy/beam ! Combined flux in latest and established models = 2.94215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 2.94215 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7708 mas, bmaj=1.633 mas, bpa=-9.404 degrees ! Estimated noise=805.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122868 Jy ! Component: 100 - total flux cleaned = 0.181089 Jy ! Component: 150 - total flux cleaned = 0.211409 Jy ! Component: 200 - total flux cleaned = 0.228261 Jy ! Total flux subtracted in 200 components = 0.228261 Jy ! Clean residual min=-0.006595 max=0.011658 Jy/beam ! Clean residual mean=0.000340 rms=0.002178 Jy/beam ! Combined flux in latest and established models = 3.17041 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 3.17041 Jy ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Added new window around map position (2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103252 Jy ! Component: 100 - total flux cleaned = 0.0137458 Jy ! Component: 150 - total flux cleaned = 0.0157284 Jy ! Component: 200 - total flux cleaned = 0.0165792 Jy ! Total flux subtracted in 200 components = 0.0165792 Jy ! Clean residual min=-0.006409 max=0.004793 Jy/beam ! Clean residual mean=-0.000014 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 3.18699 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 3.18699 Jy ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=2.479 mas, bmaj=4.312 mas, bpa=-9.299 degrees ! Estimated noise=971.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134301 Jy ! Component: 100 - total flux cleaned = 0.00168885 Jy ! Component: 150 - total flux cleaned = 0.00174164 Jy ! Component: 200 - total flux cleaned = 0.00178896 Jy ! Total flux subtracted in 200 components = 0.00178896 Jy ! Clean residual min=-0.003923 max=0.003477 Jy/beam ! Clean residual mean=-0.000105 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 3.18878 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.16977e-05 Jy ! Component: 100 - total flux cleaned = 4.11734e-05 Jy ! Component: 150 - total flux cleaned = 4.21512e-05 Jy ! Component: 200 - total flux cleaned = 4.28006e-05 Jy ! Total flux subtracted in 200 components = 4.28006e-05 Jy ! Clean residual min=-0.003841 max=0.003512 Jy/beam ! Clean residual mean=-0.000108 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 3.18882 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 3.18882 Jy ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! Estimated beam: bmin=0.7708 mas, bmaj=1.633 mas, bpa=-9.404 degrees ! Estimated noise=805.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050088 Jy ! Component: 100 - total flux cleaned = -0.000500925 Jy ! Component: 150 - total flux cleaned = -0.00050298 Jy ! Component: 200 - total flux cleaned = -0.000495768 Jy ! Total flux subtracted in 200 components = -0.000495768 Jy ! Clean residual min=-0.006063 max=0.004299 Jy/beam ! Clean residual mean=-0.000042 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 3.18833 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 3.18833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.565538Jy sigma=0.001134 ! Fit after self-cal, rms=2.565361Jy sigma=0.001130 wmodel J1337-1257_X_2003_05_07_pus_map.mod ! Writing 76 model components to file: J1337-1257_X_2003_05_07_pus_map.mod wobs J1337-1257_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1337-1257_X_2003_05_07_pus_uvs.fits wwins J1337-1257_X_2003_05_07_pus_map.win ! wwins: Wrote 5 windows to J1337-1257_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281844 Jy ! Component: 100 - total flux cleaned = -0.00386374 Jy ! Component: 150 - total flux cleaned = -0.00429694 Jy ! Component: 200 - total flux cleaned = -0.00429631 Jy ! Component: 250 - total flux cleaned = -0.00429652 Jy ! Component: 300 - total flux cleaned = -0.00452637 Jy ! Component: 350 - total flux cleaned = -0.00482575 Jy ! Component: 400 - total flux cleaned = -0.00489972 Jy ! Component: 450 - total flux cleaned = -0.00504287 Jy ! Component: 500 - total flux cleaned = -0.00518283 Jy ! Component: 550 - total flux cleaned = -0.00538755 Jy ! Component: 600 - total flux cleaned = -0.00545428 Jy ! Component: 650 - total flux cleaned = -0.00558493 Jy ! Component: 700 - total flux cleaned = -0.00558441 Jy ! Component: 750 - total flux cleaned = -0.00583979 Jy ! Component: 800 - total flux cleaned = -0.00602811 Jy ! Component: 850 - total flux cleaned = -0.00615192 Jy ! Component: 900 - total flux cleaned = -0.00609088 Jy ! Component: 950 - total flux cleaned = -0.00621239 Jy ! Component: 1000 - total flux cleaned = -0.00621232 Jy ! Total flux subtracted in 1024 components = -0.00621258 Jy ! Clean residual min=-0.003084 max=0.003261 Jy/beam ! Clean residual mean=0.000017 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 3.18211 Jy keep ! Adding 71 model components to the UV plane model. ! The established model now contains 143 components and 3.18211 Jy wmap "J1337-1257_X_2003_05_07_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7708 x 1.633 at -9.404 degrees (North through East) ! Clean map min=-0.0050754 max=2.6121 Jy/beam ! Writing clean map to FITS file: J1337-1257_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.61211 invert ! Inverting map ! Your choice of large map pixels excluded 3% of the data. ! The x-axis pixel size should ideally be below 0.1894 milli-arcsec ! The y-axis pixel size should ideally be below 0.1764 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00112127 device "J1337-1257_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1337-1257_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.128778 0.128778 0.257556 0.515111 1.03022 2.06045 4.12089 8.24178 16.4836 32.9671 65.9342 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.612 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7708 x 1.633 at -9.404 degrees (North through East) ! Clean map min=-0.0050754 max=2.6121 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1337-1257_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1337-1257_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1337-1257_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 15:48:02 2006