! Started logfile: J1246-2547_X_2003_05_07_pus_uvs.log on Thu Dec 14 15:42:09 2006 obs J1246-2547_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1246-2547_X_2003_05_07_pus_uva.fits ! AN table 1: 34 integrations on 171 of 171 possible baselines. ! AN table 2: 24 integrations on 171 of 171 possible baselines. ! AN table 3: 161 integrations on 171 of 171 possible baselines. ! AN table 4: 11 integrations on 171 of 171 possible baselines. ! AN table 5: 40 integrations on 171 of 171 possible baselines. ! AN table 6: 686 integrations on 171 of 171 possible baselines. ! AN table 7: 138 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0381186 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1739 lines of history. ! ! Reading 28524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 256 float field_cell field_cell = 0.2 float taper_size taper_size = 70. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 580 telescope corrections were flagged in sub-array 1. ! A total of 435 telescope corrections were flagged in sub-array 2. ! A total of 2523 telescope corrections were flagged in sub-array 3. ! A total of 209 telescope corrections were flagged in sub-array 4. ! A total of 596 telescope corrections were flagged in sub-array 5. ! A total of 10919 telescope corrections were flagged in sub-array 6. ! A total of 2383 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 580 telescope corrections were flagged in sub-array 1. ! A total of 435 telescope corrections were flagged in sub-array 2. ! A total of 2526 telescope corrections were flagged in sub-array 3. ! A total of 209 telescope corrections were flagged in sub-array 4. ! A total of 596 telescope corrections were flagged in sub-array 5. ! A total of 10919 telescope corrections were flagged in sub-array 6. ! A total of 2388 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 580 telescope corrections were flagged in sub-array 1. ! A total of 435 telescope corrections were flagged in sub-array 2. ! A total of 2522 telescope corrections were flagged in sub-array 3. ! A total of 209 telescope corrections were flagged in sub-array 4. ! A total of 596 telescope corrections were flagged in sub-array 5. ! A total of 10919 telescope corrections were flagged in sub-array 6. ! A total of 2388 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 580 telescope corrections were flagged in sub-array 1. ! A total of 435 telescope corrections were flagged in sub-array 2. ! A total of 2522 telescope corrections were flagged in sub-array 3. ! A total of 209 telescope corrections were flagged in sub-array 4. ! A total of 596 telescope corrections were flagged in sub-array 5. ! A total of 10920 telescope corrections were flagged in sub-array 6. ! A total of 2384 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.904728Jy sigma=0.004672 ! Fit after self-cal, rms=0.593461Jy sigma=0.002300 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.21% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=0.7008 mas, bmaj=0.9866 mas, bpa=-2.49 degrees ! Estimated noise=1731.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.509526 Jy ! Component: 100 - total flux cleaned = 0.647116 Jy ! Total flux subtracted in 100 components = 0.647116 Jy ! Clean residual min=-0.024611 max=0.058138 Jy/beam ! Clean residual mean=0.001062 rms=0.009086 Jy/beam ! Combined flux in latest and established models = 0.647116 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.647116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506014Jy sigma=0.001613 ! Fit after self-cal, rms=0.506391Jy sigma=0.001612 ! Inverting map ! Your choice of large map pixels excluded 7.21% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629377 Jy ! Component: 100 - total flux cleaned = 0.0957288 Jy ! Total flux subtracted in 100 components = 0.0957288 Jy ! Clean residual min=-0.022534 max=0.030065 Jy/beam ! Clean residual mean=0.000417 rms=0.006308 Jy/beam ! Combined flux in latest and established models = 0.742845 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.742845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.499663Jy sigma=0.001400 ! Fit after self-cal, rms=0.499988Jy sigma=0.001400 ! Inverting map ! Your choice of large map pixels excluded 7.21% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.21% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.108 mas, bmaj=1.51 mas, bpa=-19.5 degrees ! Estimated noise=709.369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234425 Jy ! Component: 100 - total flux cleaned = 0.0329737 Jy ! Component: 150 - total flux cleaned = 0.0364555 Jy ! Component: 200 - total flux cleaned = 0.0368112 Jy ! Total flux subtracted in 200 components = 0.0368112 Jy ! Clean residual min=-0.021407 max=0.024835 Jy/beam ! Clean residual mean=0.000300 rms=0.006867 Jy/beam ! Combined flux in latest and established models = 0.779656 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.779656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500057Jy sigma=0.001368 ! Fit after self-cal, rms=0.500090Jy sigma=0.001368 ! Inverting map ! Your choice of large map pixels excluded 7.21% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.92 GG 1.00* HN 1.00* ! KK 1.05 KP 1.02 LA 0.95 MA 1.00* ! MC 1.00* MK 0.97 NL 1.09 ON 1.00* ! OV 0.97 PT 0.91 SC 1.00* TC 1.01 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.96 GG 1.00* HN 1.02 ! KK 1.00* KP 1.05 LA 0.97 MA 1.00* ! MC 1.00* MK 1.00* NL 1.26 ON 1.00* ! OV 1.00* PT 0.97 SC 1.00* TC 1.00* ! TS 1.00* WF 1.15 WZ 1.00* ! ! A total of 291 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.96 GG 1.00* HN 1.07 ! KK 1.00* KP 1.02 LA 0.95 MA 1.04 ! MC 1.18 MK 1.00* NL 1.13 ON 1.15 ! OV 0.89 PT 0.94 SC 1.07 TC 0.93 ! TS 1.00* WF 1.03 WZ 0.90 ! ! A total of 54 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.98 GG 1.00* HN 1.05 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.25 ON 1.00* ! OV 1.00* PT 1.00* SC 1.07 TC 0.82 ! TS 1.00* WF 0.99 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 87 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.93 GG 1.00* HN 1.00* ! KK 1.00 KP 0.95 LA 0.94 MA 1.00* ! MC 1.00* MK 0.97 NL 1.05 ON 1.00* ! OV 0.97 PT 0.95 SC 1.00* TC 1.04 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.96 GG 1.00* HN 1.03 ! KK 1.00* KP 0.99 LA 0.98 MA 1.00* ! MC 1.00* MK 1.00* NL 1.22 ON 1.00* ! OV 1.00* PT 1.00 SC 1.00* TC 1.00* ! TS 1.00* WF 1.14 WZ 1.00* ! ! A total of 291 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.95 GG 1.00* HN 1.04 ! KK 1.00* KP 0.96 LA 0.96 MA 1.03 ! MC 1.16 MK 1.00* NL 1.09 ON 1.10 ! OV 0.92 PT 0.98 SC 1.04 TC 1.02 ! TS 1.00* WF 1.00 WZ 0.93 ! ! A total of 54 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.98 GG 1.00* HN 1.09 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.19 ON 1.00* ! OV 1.00* PT 1.00* SC 1.03 TC 0.94 ! TS 1.00* WF 1.03 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.90 GG 1.00* HN 1.00* ! KK 1.04 KP 0.88 LA 0.96 MA 1.00* ! MC 1.00* MK 0.97 NL 1.03 ON 1.00* ! OV 1.00 PT 0.98 SC 1.00* TC 1.04 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.94 GG 1.00* HN 1.05 ! KK 1.00* KP 0.93 LA 0.95 MA 1.00* ! MC 1.00* MK 1.00* NL 1.21 ON 1.00* ! OV 1.00* PT 1.03 SC 1.00* TC 1.00* ! TS 1.00* WF 1.08 WZ 1.00* ! ! A total of 291 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.94 GG 1.00* HN 1.06 ! KK 1.00* KP 0.89 LA 0.97 MA 1.02 ! MC 0.99 MK 1.00* NL 1.05 ON 1.09 ! OV 0.94 PT 1.01 SC 1.04 TC 0.95 ! TS 1.00* WF 1.01 WZ 0.94 ! ! A total of 54 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.94 GG 1.00* HN 1.19 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.18 ON 1.00* ! OV 1.00* PT 1.00* SC 1.03 TC 0.85 ! TS 1.00* WF 1.01 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.88 GG 1.00* HN 1.00* ! KK 0.99 KP 0.95 LA 0.93 MA 1.00* ! MC 1.00* MK 1.00 NL 1.03 ON 1.00* ! OV 0.98 PT 0.98 SC 1.00* TC 1.03 ! TS 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.91 GG 1.00* HN 1.06 ! KK 1.00* KP 0.99 LA 0.91 MA 1.00* ! MC 1.00* MK 1.00* NL 1.22 ON 1.00* ! OV 1.00* PT 1.04 SC 1.00* TC 1.00* ! TS 1.00* WF 1.15 WZ 1.00* ! ! A total of 294 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.93 GG 1.00* HN 1.08 ! KK 1.00* KP 0.97 LA 0.93 MA 1.05 ! MC 1.60 MK 1.00* NL 1.09 ON 1.03 ! OV 0.92 PT 1.01 SC 1.10 TC 0.91 ! TS 1.00* WF 1.00 WZ 1.01 ! ! A total of 57 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.94 GG 1.00* HN 1.07 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.13 ON 1.00* ! OV 1.00* PT 1.00* SC 1.09 TC 0.84 ! TS 1.00* WF 1.02 WZ 1.00* ! ! ! Fit before self-cal, rms=0.500090Jy sigma=0.001368 ! Fit after self-cal, rms=0.510999Jy sigma=0.001266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.111 mas, bmaj=1.524 mas, bpa=-22.79 degrees ! Estimated noise=746.918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188317 Jy ! Component: 100 - total flux cleaned = -0.00200868 Jy ! Component: 150 - total flux cleaned = -0.00211088 Jy ! Component: 200 - total flux cleaned = -0.00221403 Jy ! Total flux subtracted in 200 components = -0.00221403 Jy ! Clean residual min=-0.009193 max=0.014845 Jy/beam ! Clean residual mean=0.000672 rms=0.003255 Jy/beam ! Combined flux in latest and established models = 0.777442 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.777442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.510951Jy sigma=0.001265 ! Fit after self-cal, rms=0.511747Jy sigma=0.001264 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511747Jy sigma=0.001264 ! Fit after self-cal, rms=0.512402Jy sigma=0.001240 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.11 mas, bmaj=1.52 mas, bpa=-22.51 degrees ! Estimated noise=745.486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635674 Jy ! Component: 100 - total flux cleaned = 0.000488442 Jy ! Component: 150 - total flux cleaned = 0.000228313 Jy ! Component: 200 - total flux cleaned = 0.000113728 Jy ! Total flux subtracted in 200 components = 0.000113728 Jy ! Clean residual min=-0.004893 max=0.014646 Jy/beam ! Clean residual mean=0.000824 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.777556 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.777556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512371Jy sigma=0.001238 ! Fit after self-cal, rms=0.512509Jy sigma=0.001238 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012833 Jy ! Component: 100 - total flux cleaned = 0.0131308 Jy ! Component: 150 - total flux cleaned = 0.0129374 Jy ! Component: 200 - total flux cleaned = 0.0127815 Jy ! Total flux subtracted in 200 components = 0.0127815 Jy ! Clean residual min=-0.005084 max=0.006934 Jy/beam ! Clean residual mean=0.000218 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.790337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.790337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512231Jy sigma=0.001231 ! Fit after self-cal, rms=0.512284Jy sigma=0.001229 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512284Jy sigma=0.001229 ! Fit after self-cal, rms=0.513070Jy sigma=0.001225 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.105 mas, bmaj=1.516 mas, bpa=-22.49 degrees ! Estimated noise=744.939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766957 Jy ! Component: 100 - total flux cleaned = 0.00804238 Jy ! Component: 150 - total flux cleaned = 0.00804391 Jy ! Component: 200 - total flux cleaned = 0.00794206 Jy ! Total flux subtracted in 200 components = 0.00794206 Jy ! Clean residual min=-0.003547 max=0.004882 Jy/beam ! Clean residual mean=0.000277 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.798279 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.798279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512958Jy sigma=0.001222 ! Fit after self-cal, rms=0.512715Jy sigma=0.001221 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149152 Jy ! Component: 100 - total flux cleaned = 0.00158608 Jy ! Component: 150 - total flux cleaned = 0.00151028 Jy ! Component: 200 - total flux cleaned = 0.00144357 Jy ! Total flux subtracted in 200 components = 0.00144357 Jy ! Clean residual min=-0.004611 max=0.004422 Jy/beam ! Clean residual mean=0.000214 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.799723 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.799723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512681Jy sigma=0.001220 ! Fit after self-cal, rms=0.512659Jy sigma=0.001220 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512659Jy sigma=0.001220 ! Fit after self-cal, rms=0.511682Jy sigma=0.001219 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=2.55 mas, bmaj=4.883 mas, bpa=-8.852 degrees ! Estimated noise=831.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315731 Jy ! Component: 100 - total flux cleaned = 0.00338624 Jy ! Component: 150 - total flux cleaned = 0.00344926 Jy ! Component: 200 - total flux cleaned = 0.00345072 Jy ! Total flux subtracted in 200 components = 0.00345072 Jy ! Clean residual min=-0.001780 max=0.003554 Jy/beam ! Clean residual mean=0.000579 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.803173 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.803173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511678Jy sigma=0.001219 ! Fit after self-cal, rms=0.511497Jy sigma=0.001218 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814124 Jy ! Component: 100 - total flux cleaned = 0.0010247 Jy ! Component: 150 - total flux cleaned = 0.00110194 Jy ! Component: 200 - total flux cleaned = 0.00110263 Jy ! Total flux subtracted in 200 components = 0.00110263 Jy ! Clean residual min=-0.002413 max=0.003251 Jy/beam ! Clean residual mean=0.000496 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.804276 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.804276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511490Jy sigma=0.001218 ! Fit after self-cal, rms=0.511484Jy sigma=0.001218 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.104 mas, bmaj=1.518 mas, bpa=-22.41 degrees ! Estimated noise=743.612 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.104 x 1.518 at -22.41 degrees (North through East) ! Clean map min=-0.0029696 max=0.67175 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511484Jy sigma=0.001218 ! Fit after self-cal, rms=2.132694Jy sigma=0.001033 ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.098 mas, bmaj=1.511 mas, bpa=-22.91 degrees ! Estimated noise=742.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261301 Jy ! Component: 100 - total flux cleaned = 0.00287329 Jy ! Component: 150 - total flux cleaned = 0.00294495 Jy ! Component: 200 - total flux cleaned = 0.00288706 Jy ! Total flux subtracted in 200 components = 0.00288706 Jy ! Clean residual min=-0.002488 max=0.003458 Jy/beam ! Clean residual mean=0.000332 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.807163 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.807163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.132652Jy sigma=0.001032 ! Fit after self-cal, rms=2.132705Jy sigma=0.001032 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110995 Jy ! Component: 100 - total flux cleaned = 0.00116656 Jy ! Component: 150 - total flux cleaned = 0.00116335 Jy ! Component: 200 - total flux cleaned = 0.00111647 Jy ! Total flux subtracted in 200 components = 0.00111647 Jy ! Clean residual min=-0.002403 max=0.003330 Jy/beam ! Clean residual mean=0.000284 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.80828 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.80828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.132674Jy sigma=0.001032 ! Fit after self-cal, rms=2.132653Jy sigma=0.001032 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.132653Jy sigma=0.001032 ! Fit after self-cal, rms=3.191108Jy sigma=0.001031 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=0.824 mas, bmaj=0.961 mas, bpa=-5.23 degrees ! Estimated noise=1743.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.515805 Jy ! Component: 100 - total flux cleaned = 0.644657 Jy ! Component: 150 - total flux cleaned = 0.705381 Jy ! Component: 200 - total flux cleaned = 0.740115 Jy ! Total flux subtracted in 200 components = 0.740115 Jy ! Clean residual min=-0.011176 max=0.017383 Jy/beam ! Clean residual mean=0.000677 rms=0.003359 Jy/beam ! Combined flux in latest and established models = 0.740115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.740115 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.097 mas, bmaj=1.512 mas, bpa=-22.86 degrees ! Estimated noise=742.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326191 Jy ! Component: 100 - total flux cleaned = 0.0483322 Jy ! Component: 150 - total flux cleaned = 0.0571449 Jy ! Component: 200 - total flux cleaned = 0.0623683 Jy ! Total flux subtracted in 200 components = 0.0623683 Jy ! Clean residual min=-0.002249 max=0.003401 Jy/beam ! Clean residual mean=0.000652 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.802483 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 55 components and 0.802483 Jy ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=2.542 mas, bmaj=4.867 mas, bpa=-8.664 degrees ! Estimated noise=833.284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392555 Jy ! Component: 100 - total flux cleaned = 0.00587334 Jy ! Component: 150 - total flux cleaned = 0.00670535 Jy ! Component: 200 - total flux cleaned = 0.00684445 Jy ! Total flux subtracted in 200 components = 0.00684445 Jy ! Clean residual min=-0.001491 max=0.003094 Jy/beam ! Clean residual mean=0.000593 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.809327 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114747 Jy ! Component: 100 - total flux cleaned = 0.000192707 Jy ! Component: 150 - total flux cleaned = 0.000245433 Jy ! Component: 200 - total flux cleaned = 0.000294788 Jy ! Total flux subtracted in 200 components = 0.000294788 Jy ! Clean residual min=-0.001465 max=0.003033 Jy/beam ! Clean residual mean=0.000572 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.809622 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.809622 Jy ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! Estimated beam: bmin=1.097 mas, bmaj=1.512 mas, bpa=-22.86 degrees ! Estimated noise=742.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.20357e-06 Jy ! Component: 100 - total flux cleaned = -3.14221e-06 Jy ! Component: 150 - total flux cleaned = 6.45494e-05 Jy ! Component: 200 - total flux cleaned = 6.5339e-05 Jy ! Total flux subtracted in 200 components = 6.5339e-05 Jy ! Clean residual min=-0.002428 max=0.003057 Jy/beam ! Clean residual mean=0.000333 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.809687 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 82 components and 0.809687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.190829Jy sigma=0.001032 ! Fit after self-cal, rms=3.190959Jy sigma=0.001032 wmodel J1246-2547_X_2003_05_07_pus_map.mod ! Writing 82 model components to file: J1246-2547_X_2003_05_07_pus_map.mod wobs J1246-2547_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1246-2547_X_2003_05_07_pus_uvs.fits wwins J1246-2547_X_2003_05_07_pus_map.win ! wwins: Wrote 2 windows to J1246-2547_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013106 Jy ! Component: 100 - total flux cleaned = 0.00248737 Jy ! Component: 150 - total flux cleaned = 0.00341324 Jy ! Component: 200 - total flux cleaned = 0.00425378 Jy ! Component: 250 - total flux cleaned = 0.00502094 Jy ! Component: 300 - total flux cleaned = 0.00579833 Jy ! Component: 350 - total flux cleaned = 0.00632445 Jy ! Component: 400 - total flux cleaned = 0.00676151 Jy ! Component: 450 - total flux cleaned = 0.00708041 Jy ! Component: 500 - total flux cleaned = 0.00746085 Jy ! Component: 550 - total flux cleaned = 0.00773132 Jy ! Component: 600 - total flux cleaned = 0.00802865 Jy ! Component: 650 - total flux cleaned = 0.00822243 Jy ! Component: 700 - total flux cleaned = 0.00841264 Jy ! Component: 750 - total flux cleaned = 0.00859903 Jy ! Component: 800 - total flux cleaned = 0.00878198 Jy ! Component: 850 - total flux cleaned = 0.00896157 Jy ! Component: 900 - total flux cleaned = 0.00905005 Jy ! Component: 950 - total flux cleaned = 0.0091957 Jy ! Component: 1000 - total flux cleaned = 0.00933943 Jy ! Total flux subtracted in 1024 components = 0.00936778 Jy ! Clean residual min=-0.001418 max=0.001703 Jy/beam ! Clean residual mean=0.000079 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.819055 Jy keep ! Adding 65 model components to the UV plane model. ! The established model now contains 147 components and 0.819055 Jy wmap "J1246-2547_X_2003_05_07_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.097 x 1.512 at -22.86 degrees (North through East) ! Clean map min=-0.0019512 max=0.67726 Jy/beam ! Writing clean map to FITS file: J1246-2547_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.677256 invert ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1794 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00053116 device "J1246-2547_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1246-2547_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.235285 0.235285 0.470569 0.941138 1.88228 3.76455 7.5291 15.0582 30.1164 60.2328 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.677 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.097 x 1.512 at -22.86 degrees (North through East) ! Clean map min=-0.0019512 max=0.67726 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1246-2547_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1246-2547_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1246-2547_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 15:46:10 2006