! Started logfile: J1239-1023_X_2003_05_07_pus_uvs.log on Thu Dec 14 17:56:49 2006 obs J1239-1023_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1239-1023_X_2003_05_07_pus_uva.fits ! AN table 1: 34 integrations on 171 of 171 possible baselines. ! AN table 2: 17 integrations on 171 of 171 possible baselines. ! AN table 3: 146 integrations on 171 of 171 possible baselines. ! AN table 4: 90 integrations on 171 of 171 possible baselines. ! AN table 5: 53 integrations on 171 of 171 possible baselines. ! AN table 6: 161 integrations on 171 of 171 possible baselines. ! AN table 7: 28 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0360274 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1239-1023 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1739 lines of history. ! ! Reading 13036 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.16 float taper_size taper_size = 90. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.160x0.160 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 302 telescope corrections were flagged in sub-array 2. ! A total of 2639 telescope corrections were flagged in sub-array 3. ! A total of 1413 telescope corrections were flagged in sub-array 4. ! A total of 1007 telescope corrections were flagged in sub-array 5. ! A total of 2390 telescope corrections were flagged in sub-array 6. ! A total of 498 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 302 telescope corrections were flagged in sub-array 2. ! A total of 2642 telescope corrections were flagged in sub-array 3. ! A total of 1413 telescope corrections were flagged in sub-array 4. ! A total of 1007 telescope corrections were flagged in sub-array 5. ! A total of 2390 telescope corrections were flagged in sub-array 6. ! A total of 498 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 302 telescope corrections were flagged in sub-array 2. ! A total of 2642 telescope corrections were flagged in sub-array 3. ! A total of 1419 telescope corrections were flagged in sub-array 4. ! A total of 1007 telescope corrections were flagged in sub-array 5. ! A total of 2390 telescope corrections were flagged in sub-array 6. ! A total of 498 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 577 telescope corrections were flagged in sub-array 1. ! A total of 302 telescope corrections were flagged in sub-array 2. ! A total of 2639 telescope corrections were flagged in sub-array 3. ! A total of 1413 telescope corrections were flagged in sub-array 4. ! A total of 1007 telescope corrections were flagged in sub-array 5. ! A total of 2390 telescope corrections were flagged in sub-array 6. ! A total of 498 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.937318Jy sigma=0.007665 ! Fit after self-cal, rms=0.445188Jy sigma=0.003888 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5924 mas, bmaj=2.14 mas, bpa=2.517 degrees ! Estimated noise=1187.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.452355 Jy ! Component: 100 - total flux cleaned = 0.613516 Jy ! Total flux subtracted in 100 components = 0.613516 Jy ! Clean residual min=-0.027521 max=0.100633 Jy/beam ! Clean residual mean=0.000389 rms=0.009551 Jy/beam ! Combined flux in latest and established models = 0.613516 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.613516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313849Jy sigma=0.002559 ! Fit after self-cal, rms=0.313681Jy sigma=0.002556 ! Inverting map ! Added new window around map position (-2.08, -0.32). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102904 Jy ! Component: 100 - total flux cleaned = 0.168936 Jy ! Total flux subtracted in 100 components = 0.168936 Jy ! Clean residual min=-0.020093 max=0.049364 Jy/beam ! Clean residual mean=0.000304 rms=0.006306 Jy/beam ! Combined flux in latest and established models = 0.782453 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.782452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245603Jy sigma=0.001870 ! Fit after self-cal, rms=0.241906Jy sigma=0.001835 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535685 Jy ! Component: 100 - total flux cleaned = 0.0882556 Jy ! Total flux subtracted in 100 components = 0.0882556 Jy ! Clean residual min=-0.014879 max=0.045108 Jy/beam ! Clean residual mean=0.000266 rms=0.004692 Jy/beam ! Combined flux in latest and established models = 0.870708 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.870708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217425Jy sigma=0.001570 ! Fit after self-cal, rms=0.216447Jy sigma=0.001560 ! Inverting map ! Added new window around map position (-0.96, -0.32). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399915 Jy ! Component: 100 - total flux cleaned = 0.0645192 Jy ! Total flux subtracted in 100 components = 0.0645192 Jy ! Clean residual min=-0.013448 max=0.028832 Jy/beam ! Clean residual mean=0.000234 rms=0.003635 Jy/beam ! Combined flux in latest and established models = 0.935227 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.935227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203738Jy sigma=0.001416 ! Fit after self-cal, rms=0.203036Jy sigma=0.001409 ! Inverting map ! Added new window around map position (0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240848 Jy ! Component: 100 - total flux cleaned = 0.0351646 Jy ! Total flux subtracted in 100 components = 0.0351646 Jy ! Clean residual min=-0.012108 max=0.015732 Jy/beam ! Clean residual mean=0.000216 rms=0.003124 Jy/beam ! Combined flux in latest and established models = 0.970392 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.970392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198735Jy sigma=0.001359 ! Fit after self-cal, rms=0.198624Jy sigma=0.001358 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8306 mas, bmaj=2.641 mas, bpa=0.5668 degrees ! Estimated noise=748.064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204191 Jy ! Component: 100 - total flux cleaned = 0.0318574 Jy ! Component: 150 - total flux cleaned = 0.0367732 Jy ! Component: 200 - total flux cleaned = 0.0372246 Jy ! Total flux subtracted in 200 components = 0.0372246 Jy ! Clean residual min=-0.008420 max=0.014732 Jy/beam ! Clean residual mean=0.002154 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 1.00762 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 1.00762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196440Jy sigma=0.001333 ! Fit after self-cal, rms=0.196288Jy sigma=0.001332 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 3.03 ! MC 1.02 MK 1.00* NL 1.00* ON 1.09 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.83 ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.01 GG 1.00* HN 0.96 ! KK 1.02 KP 1.17 LA 0.98 MA 1.00* ! MC 0.98 MK 0.96 NL 1.00* ON 1.17 ! OV 0.97 PT 1.03 SC 0.97 TC 1.00* ! TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 0.98 GG 1.00* HN 0.95 ! KK 1.00* KP 1.06 LA 0.95 MA 1.00* ! MC 1.00* MK 1.00* NL 1.08 ON 1.00* ! OV 1.00 PT 0.97 SC 0.95 TC 1.00* ! TS 1.00* WF 0.99 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.00 ! MC 1.22 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.71 WF 1.00* WZ 1.00 ! ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 108 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 0.94 ! MC 1.05 MK 1.00* NL 1.00* ON 1.02 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.80 ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.02 GG 1.00* HN 0.94 ! KK 0.96 KP 1.10 LA 0.99 MA 1.00* ! MC 0.98 MK 0.97 NL 1.00* ON 1.17 ! OV 0.97 PT 1.06 SC 1.00 TC 1.00* ! TS 0.98 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 0.97 GG 1.00* HN 0.95 ! KK 1.00* KP 1.00 LA 0.96 MA 1.00* ! MC 1.00* MK 1.00* NL 1.03 ON 1.00* ! OV 1.01 PT 1.02 SC 0.92 TC 1.00* ! TS 1.00* WF 1.01 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 0.93 ! MC 1.19 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.87 WF 1.00* WZ 1.12 ! ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 108 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.03 ! MC 0.92 MK 1.00* NL 1.00* ON 1.13 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.81 ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.02 GG 1.00* HN 0.95 ! KK 1.05 KP 1.04 LA 1.00 MA 1.00* ! MC 1.17 MK 0.98 NL 1.00* ON 0.96 ! OV 1.01 PT 1.08 SC 1.01 TC 1.00* ! TS 1.00 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.97 GG 1.00* HN 0.95 ! KK 1.00* KP 0.95 LA 0.97 MA 1.00* ! MC 1.00* MK 1.00* NL 1.02 ON 1.00* ! OV 1.06 PT 1.04 SC 0.95 TC 1.00* ! TS 1.00* WF 1.00 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.03 ! MC 1.06 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.87 WF 1.00* WZ 1.14 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 111 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 1.07 ! MC 1.02 MK 1.00* NL 1.00* ON 1.02 ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 1.00* WF 1.00* WZ 0.84 ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.99 GG 1.00* HN 0.89 ! KK 0.98 KP 1.09 LA 1.00 MA 1.00* ! MC 1.34 MK 1.00 NL 1.00* ON 1.07 ! OV 0.99 PT 1.10 SC 1.04 TC 1.00* ! TS 0.98 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.95 GG 1.00* HN 1.00 ! KK 1.00* KP 1.01 LA 0.95 MA 1.00* ! MC 1.00* MK 1.00* NL 1.00 ON 1.00* ! OV 1.05 PT 1.05 SC 0.99 TC 1.00* ! TS 1.00* WF 0.97 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MA 0.87 ! MC 1.02 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* TC 1.00* ! TS 0.84 WF 1.00* WZ 1.12 ! ! ! Fit before self-cal, rms=0.196288Jy sigma=0.001332 ! Fit after self-cal, rms=0.185268Jy sigma=0.001274 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8416 mas, bmaj=2.769 mas, bpa=-0.1563 degrees ! Estimated noise=764.837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556578 Jy ! Component: 100 - total flux cleaned = 0.000761174 Jy ! Component: 150 - total flux cleaned = 0.00110244 Jy ! Component: 200 - total flux cleaned = 0.00153642 Jy ! Total flux subtracted in 200 components = 0.00153642 Jy ! Clean residual min=-0.008630 max=0.011189 Jy/beam ! Clean residual mean=0.001180 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 1.00915 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 1.00915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184878Jy sigma=0.001269 ! Fit after self-cal, rms=0.185114Jy sigma=0.001269 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185114Jy sigma=0.001269 ! Fit after self-cal, rms=0.182434Jy sigma=0.001238 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8413 mas, bmaj=2.772 mas, bpa=-0.1928 degrees ! Estimated noise=761.086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183732 Jy ! Component: 100 - total flux cleaned = -0.00126039 Jy ! Component: 150 - total flux cleaned = -0.000693292 Jy ! Component: 200 - total flux cleaned = -0.000404507 Jy ! Total flux subtracted in 200 components = -0.000404507 Jy ! Clean residual min=-0.008236 max=0.010236 Jy/beam ! Clean residual mean=0.000598 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 1.00875 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 1.00875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182192Jy sigma=0.001236 ! Fit after self-cal, rms=0.182159Jy sigma=0.001236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.08, 1.76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983511 Jy ! Component: 100 - total flux cleaned = 0.0115295 Jy ! Component: 150 - total flux cleaned = 0.011697 Jy ! Component: 200 - total flux cleaned = 0.011812 Jy ! Total flux subtracted in 200 components = 0.011812 Jy ! Clean residual min=-0.007739 max=0.007679 Jy/beam ! Clean residual mean=0.000412 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 1.02056 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 1.02056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181647Jy sigma=0.001229 ! Fit after self-cal, rms=0.181471Jy sigma=0.001227 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181471Jy sigma=0.001227 ! Fit after self-cal, rms=0.178782Jy sigma=0.001198 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8444 mas, bmaj=2.77 mas, bpa=-0.1495 degrees ! Estimated noise=762.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618422 Jy ! Component: 100 - total flux cleaned = 0.00951758 Jy ! Component: 150 - total flux cleaned = 0.0104699 Jy ! Component: 200 - total flux cleaned = 0.011093 Jy ! Total flux subtracted in 200 components = 0.011093 Jy ! Clean residual min=-0.002984 max=0.004439 Jy/beam ! Clean residual mean=0.000217 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 1.03165 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 139 components and 1.03165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178549Jy sigma=0.001194 ! Fit after self-cal, rms=0.178458Jy sigma=0.001194 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015882 Jy ! Component: 100 - total flux cleaned = 0.00214072 Jy ! Component: 150 - total flux cleaned = 0.00247956 Jy ! Component: 200 - total flux cleaned = 0.00279489 Jy ! Total flux subtracted in 200 components = 0.00279489 Jy ! Clean residual min=-0.003365 max=0.004154 Jy/beam ! Clean residual mean=0.000175 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 1.03445 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 159 components and 1.03445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178380Jy sigma=0.001193 ! Fit after self-cal, rms=0.178358Jy sigma=0.001193 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 90 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178358Jy sigma=0.001193 ! Fit after self-cal, rms=0.178444Jy sigma=0.001192 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.82 mas, bmaj=3.407 mas, bpa=-12.56 degrees ! Estimated noise=867.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422307 Jy ! Component: 100 - total flux cleaned = 0.00651918 Jy ! Component: 150 - total flux cleaned = 0.0072605 Jy ! Component: 200 - total flux cleaned = 0.00759886 Jy ! Total flux subtracted in 200 components = 0.00759886 Jy ! Clean residual min=-0.003384 max=0.004012 Jy/beam ! Clean residual mean=0.000215 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 1.04205 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 190 components and 1.04205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178390Jy sigma=0.001191 ! Fit after self-cal, rms=0.178351Jy sigma=0.001191 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106378 Jy ! Component: 100 - total flux cleaned = 0.00149082 Jy ! Component: 150 - total flux cleaned = 0.00167981 Jy ! Component: 200 - total flux cleaned = 0.00185405 Jy ! Total flux subtracted in 200 components = 0.00185405 Jy ! Clean residual min=-0.003428 max=0.003832 Jy/beam ! Clean residual mean=0.000167 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 1.0439 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 204 components and 1.0439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178326Jy sigma=0.001191 ! Fit after self-cal, rms=0.178319Jy sigma=0.001191 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8466 mas, bmaj=2.77 mas, bpa=-0.1686 degrees ! Estimated noise=763.924 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8466 x 2.77 at -0.1686 degrees (North through East) ! Clean map min=-0.0041193 max=0.59996 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178319Jy sigma=0.001191 ! Fit after self-cal, rms=0.225547Jy sigma=0.001067 ! Inverting map and beam ! Estimated beam: bmin=0.8466 mas, bmaj=2.769 mas, bpa=-0.1813 degrees ! Estimated noise=764.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156675 Jy ! Component: 100 - total flux cleaned = 0.00212589 Jy ! Component: 150 - total flux cleaned = 0.00240721 Jy ! Component: 200 - total flux cleaned = 0.00272829 Jy ! Total flux subtracted in 200 components = 0.00272829 Jy ! Clean residual min=-0.002992 max=0.003665 Jy/beam ! Clean residual mean=0.000153 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 1.04663 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 222 components and 1.04663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225486Jy sigma=0.001066 ! Fit after self-cal, rms=0.225462Jy sigma=0.001066 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633162 Jy ! Component: 100 - total flux cleaned = 0.000870422 Jy ! Component: 150 - total flux cleaned = 0.00109359 Jy ! Component: 200 - total flux cleaned = 0.00125321 Jy ! Total flux subtracted in 200 components = 0.00125321 Jy ! Clean residual min=-0.003066 max=0.003678 Jy/beam ! Clean residual mean=0.000133 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 1.04788 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 226 components and 1.04788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225427Jy sigma=0.001066 ! Fit after self-cal, rms=0.225415Jy sigma=0.001066 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225415Jy sigma=0.001066 ! Fit after self-cal, rms=0.225881Jy sigma=0.001065 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6111 mas, bmaj=2.314 mas, bpa=1.304 degrees ! Estimated noise=1209.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.459101 Jy ! Component: 100 - total flux cleaned = 0.632298 Jy ! Component: 150 - total flux cleaned = 0.738799 Jy ! Component: 200 - total flux cleaned = 0.81122 Jy ! Total flux subtracted in 200 components = 0.81122 Jy ! Clean residual min=-0.014568 max=0.040486 Jy/beam ! Clean residual mean=0.000213 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 0.81122 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.81122 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8489 mas, bmaj=2.768 mas, bpa=-0.2045 degrees ! Estimated noise=765.274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842947 Jy ! Component: 100 - total flux cleaned = 0.132273 Jy ! Component: 150 - total flux cleaned = 0.161225 Jy ! Component: 200 - total flux cleaned = 0.180869 Jy ! Total flux subtracted in 200 components = 0.180869 Jy ! Clean residual min=-0.004990 max=0.011498 Jy/beam ! Clean residual mean=0.001038 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.992089 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 59 components and 0.992089 Jy ! Inverting map ! Added new window around map position (-3.68, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143661 Jy ! Component: 100 - total flux cleaned = 0.0251726 Jy ! Component: 150 - total flux cleaned = 0.0335377 Jy ! Component: 200 - total flux cleaned = 0.0400891 Jy ! Total flux subtracted in 200 components = 0.0400891 Jy ! Clean residual min=-0.003465 max=0.004670 Jy/beam ! Clean residual mean=0.000412 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 1.03218 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 109 components and 1.03218 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 90 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.82 mas, bmaj=3.404 mas, bpa=-12.48 degrees ! Estimated noise=868.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712672 Jy ! Component: 100 - total flux cleaned = 0.010931 Jy ! Component: 150 - total flux cleaned = 0.0126581 Jy ! Component: 200 - total flux cleaned = 0.0141243 Jy ! Total flux subtracted in 200 components = 0.0141243 Jy ! Clean residual min=-0.003577 max=0.004600 Jy/beam ! Clean residual mean=0.000311 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 1.0463 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125386 Jy ! Component: 100 - total flux cleaned = 0.00232741 Jy ! Component: 150 - total flux cleaned = 0.00309002 Jy ! Component: 200 - total flux cleaned = 0.00369104 Jy ! Total flux subtracted in 200 components = 0.00369104 Jy ! Clean residual min=-0.003579 max=0.004340 Jy/beam ! Clean residual mean=0.000216 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 1.04999 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 182 components and 1.04999 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8489 mas, bmaj=2.768 mas, bpa=-0.2045 degrees ! Estimated noise=765.274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500707 Jy ! Component: 100 - total flux cleaned = 0.000750531 Jy ! Component: 150 - total flux cleaned = 0.00105916 Jy ! Component: 200 - total flux cleaned = 0.00134476 Jy ! Total flux subtracted in 200 components = 0.00134476 Jy ! Clean residual min=-0.003365 max=0.003741 Jy/beam ! Clean residual mean=0.000113 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 1.05134 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 193 components and 1.05134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225901Jy sigma=0.001066 ! Fit after self-cal, rms=0.225911Jy sigma=0.001065 wmodel J1239-1023_X_2003_05_07_pus_map.mod ! Writing 193 model components to file: J1239-1023_X_2003_05_07_pus_map.mod wobs J1239-1023_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1239-1023_X_2003_05_07_pus_uvs.fits wwins J1239-1023_X_2003_05_07_pus_map.win ! wwins: Wrote 6 windows to J1239-1023_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631953 Jy ! Component: 100 - total flux cleaned = 0.000743727 Jy ! Component: 150 - total flux cleaned = 0.000903029 Jy ! Component: 200 - total flux cleaned = 0.00110692 Jy ! Component: 250 - total flux cleaned = 0.00120483 Jy ! Component: 300 - total flux cleaned = 0.00134701 Jy ! Component: 350 - total flux cleaned = 0.00148495 Jy ! Component: 400 - total flux cleaned = 0.00162036 Jy ! Component: 450 - total flux cleaned = 0.0017958 Jy ! Component: 500 - total flux cleaned = 0.0017954 Jy ! Component: 550 - total flux cleaned = 0.00183763 Jy ! Component: 600 - total flux cleaned = 0.0017964 Jy ! Component: 650 - total flux cleaned = 0.00183675 Jy ! Component: 700 - total flux cleaned = 0.00187642 Jy ! Component: 750 - total flux cleaned = 0.00191536 Jy ! Component: 800 - total flux cleaned = 0.00203019 Jy ! Component: 850 - total flux cleaned = 0.00203023 Jy ! Component: 900 - total flux cleaned = 0.00210475 Jy ! Component: 950 - total flux cleaned = 0.0022146 Jy ! Component: 1000 - total flux cleaned = 0.00228699 Jy ! Component: 1050 - total flux cleaned = 0.00239357 Jy ! Component: 1100 - total flux cleaned = 0.00249819 Jy ! Component: 1150 - total flux cleaned = 0.00256693 Jy ! Component: 1200 - total flux cleaned = 0.00270301 Jy ! Component: 1250 - total flux cleaned = 0.00283726 Jy ! Component: 1300 - total flux cleaned = 0.00296987 Jy ! Component: 1350 - total flux cleaned = 0.00310109 Jy ! Component: 1400 - total flux cleaned = 0.0032309 Jy ! Component: 1450 - total flux cleaned = 0.00332716 Jy ! Component: 1500 - total flux cleaned = 0.00342275 Jy ! Component: 1550 - total flux cleaned = 0.00354875 Jy ! Component: 1600 - total flux cleaned = 0.00364208 Jy ! Component: 1650 - total flux cleaned = 0.00373465 Jy ! Component: 1700 - total flux cleaned = 0.00385687 Jy ! Component: 1750 - total flux cleaned = 0.00394768 Jy ! Component: 1800 - total flux cleaned = 0.00406758 Jy ! Component: 1850 - total flux cleaned = 0.00415665 Jy ! Component: 1900 - total flux cleaned = 0.00430374 Jy ! Component: 1950 - total flux cleaned = 0.00430381 Jy ! Component: 2000 - total flux cleaned = 0.00444838 Jy ! Total flux subtracted in 2048 components = 0.00444846 Jy ! Clean residual min=-0.001771 max=0.001786 Jy/beam ! Clean residual mean=0.000048 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 1.05579 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 323 components and 1.05579 Jy wmap "J1239-1023_X_2003_05_07_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8489 x 2.768 at -0.2045 degrees (North through East) ! Clean map min=-0.0029591 max=0.59714 Jy/beam ! Writing clean map to FITS file: J1239-1023_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.597138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574377 device "J1239-1023_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1239-1023_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.288565 0.288565 0.57713 1.15426 2.30852 4.61704 9.23408 18.4682 36.9363 73.8727 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.597 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8489 x 2.768 at -0.2045 degrees (North through East) ! Clean map min=-0.0029591 max=0.59714 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1239-1023_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1239-1023_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1239-1023_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 18:01:33 2006