! Started logfile: J1147-0724_X_2003_05_07_pus_uvs.log on Thu Dec 14 15:30:18 2006 obs J1147-0724_X_2003_05_07_pus_uva.fits ! Reading UV FITS file: J1147-0724_X_2003_05_07_pus_uva.fits ! AN table 1: 81 integrations on 171 of 171 possible baselines. ! AN table 2: 29 integrations on 171 of 171 possible baselines. ! AN table 3: 21 integrations on 171 of 171 possible baselines. ! AN table 4: 164 integrations on 171 of 171 possible baselines. ! AN table 5: 43 integrations on 171 of 171 possible baselines. ! AN table 6: 51 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.0521204 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1147-0724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1739 lines of history. ! ! Reading 13868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 256 float field_cell field_cell = 0.2 float taper_size taper_size = 70. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1365 telescope corrections were flagged in sub-array 1. ! A total of 479 telescope corrections were flagged in sub-array 2. ! A total of 372 telescope corrections were flagged in sub-array 3. ! A total of 2159 telescope corrections were flagged in sub-array 4. ! A total of 784 telescope corrections were flagged in sub-array 5. ! A total of 920 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 1362 telescope corrections were flagged in sub-array 1. ! A total of 476 telescope corrections were flagged in sub-array 2. ! A total of 372 telescope corrections were flagged in sub-array 3. ! A total of 2159 telescope corrections were flagged in sub-array 4. ! A total of 784 telescope corrections were flagged in sub-array 5. ! A total of 920 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 1362 telescope corrections were flagged in sub-array 1. ! A total of 476 telescope corrections were flagged in sub-array 2. ! A total of 372 telescope corrections were flagged in sub-array 3. ! A total of 2159 telescope corrections were flagged in sub-array 4. ! A total of 784 telescope corrections were flagged in sub-array 5. ! A total of 920 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 1365 telescope corrections were flagged in sub-array 1. ! A total of 476 telescope corrections were flagged in sub-array 2. ! A total of 372 telescope corrections were flagged in sub-array 3. ! A total of 2159 telescope corrections were flagged in sub-array 4. ! A total of 784 telescope corrections were flagged in sub-array 5. ! A total of 920 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.843596Jy sigma=0.007387 ! Fit after self-cal, rms=0.369240Jy sigma=0.003223 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=0.6211 mas, bmaj=1.966 mas, bpa=3.041 degrees ! Estimated noise=1257.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51026 Jy ! Component: 100 - total flux cleaned = 0.664704 Jy ! Total flux subtracted in 100 components = 0.664704 Jy ! Clean residual min=-0.027691 max=0.066986 Jy/beam ! Clean residual mean=0.000269 rms=0.008517 Jy/beam ! Combined flux in latest and established models = 0.664704 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.664704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221254Jy sigma=0.001743 ! Fit after self-cal, rms=0.220695Jy sigma=0.001742 ! Inverting map ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0701443 Jy ! Component: 100 - total flux cleaned = 0.102041 Jy ! Total flux subtracted in 100 components = 0.102041 Jy ! Clean residual min=-0.023605 max=0.038908 Jy/beam ! Clean residual mean=0.000042 rms=0.006139 Jy/beam ! Combined flux in latest and established models = 0.766745 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.766745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198606Jy sigma=0.001466 ! Fit after self-cal, rms=0.198278Jy sigma=0.001465 ! Inverting map ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Added new window around map position (-2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364374 Jy ! Component: 100 - total flux cleaned = 0.0556285 Jy ! Total flux subtracted in 100 components = 0.0556285 Jy ! Clean residual min=-0.021660 max=0.030164 Jy/beam ! Clean residual mean=-0.000120 rms=0.005278 Jy/beam ! Combined flux in latest and established models = 0.822374 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.822374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193793Jy sigma=0.001404 ! Fit after self-cal, rms=0.192875Jy sigma=0.001395 ! Inverting map ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=0.9853 mas, bmaj=2.624 mas, bpa=-0.5698 degrees ! Estimated noise=696.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088374 Jy ! Component: 100 - total flux cleaned = 0.00727738 Jy ! Component: 150 - total flux cleaned = 0.0059988 Jy ! Component: 200 - total flux cleaned = 0.0055607 Jy ! Total flux subtracted in 200 components = 0.0055607 Jy ! Clean residual min=-0.013758 max=0.013953 Jy/beam ! Clean residual mean=-0.001016 rms=0.003723 Jy/beam ! Combined flux in latest and established models = 0.827934 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.827934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191844Jy sigma=0.001382 ! Fit after self-cal, rms=0.191630Jy sigma=0.001380 ! Inverting map ! Your choice of large map pixels excluded 2.18% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 0.96 MA 1.11 ! MC 1.08 MK 1.00* NL 1.14 ON 1.11 ! OV 1.06 PT 1.03 SC 1.00* TC 1.00* ! TS 0.92 WF 1.00* WZ 0.81 ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.06 GG 1.00* HN 1.00* ! KK 1.00* KP 1.19 LA 1.10 MA 1.13 ! MC 1.48 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.01 SC 1.00* TC 1.00* ! TS 0.78 WF 1.00* WZ 1.03 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.00 GG 1.00* HN 0.98 ! KK 0.99 KP 1.00 LA 0.98 MA 1.00* ! MC 1.00* MK 1.00 NL 1.06 ON 1.00* ! OV 0.95 PT 0.98 SC 0.92 TC 1.00* ! TS 1.30 WF 1.04 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 0.89 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.56 ON 1.00* ! OV 1.00* PT 1.00* SC 0.97 TC 1.00* ! TS 1.00* WF 0.92 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 0.99 MA 0.98 ! MC 1.09 MK 1.00* NL 1.10 ON 1.10 ! OV 1.03 PT 1.06 SC 1.00* TC 1.00* ! TS 0.92 WF 1.00* WZ 0.85 ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.24 GG 1.00* HN 1.00* ! KK 1.00* KP 1.12 LA 0.98 MA 0.99 ! MC 1.45 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.21 SC 1.00* TC 1.00* ! TS 0.81 WF 1.00* WZ 1.11 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GG 1.00* HN 0.98 ! KK 0.98 KP 0.95 LA 0.99 MA 1.00* ! MC 1.00* MK 0.97 NL 1.01 ON 1.00* ! OV 0.96 PT 1.03 SC 0.89 TC 1.00* ! TS 1.29 WF 1.04 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 0.91 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.49 ON 1.00* ! OV 1.00* PT 1.00* SC 1.00 TC 1.00* ! TS 1.00* WF 0.92 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.04 MA 1.03 ! MC 1.00 MK 1.00* NL 1.07 ON 1.12 ! OV 1.08 PT 1.07 SC 1.00* TC 1.00* ! TS 0.86 WF 1.00* WZ 0.88 ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.11 GG 1.00* HN 1.00* ! KK 1.00* KP 0.97 LA 0.99 MA 1.03 ! MC 1.26 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.03 SC 1.00* TC 1.00* ! TS 0.71 WF 1.00* WZ 1.31 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 0.99 GG 1.00* HN 0.97 ! KK 1.05 KP 0.89 LA 1.00 MA 1.00* ! MC 1.00* MK 1.01 NL 0.99 ON 1.00* ! OV 1.00 PT 1.06 SC 0.90 TC 1.00* ! TS 1.38 WF 0.99 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 0.95 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.32 ON 1.00* ! OV 1.00* PT 1.00* SC 0.98 TC 1.00* ! TS 1.00* WF 0.95 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* GG 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 0.95 MA 1.27 ! MC 0.89 MK 1.00* NL 1.07 ON 1.11 ! OV 1.22 PT 1.12 SC 1.00* TC 1.00* ! TS 0.87 WF 1.00* WZ 0.93 ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.14 GG 1.00* HN 1.00* ! KK 1.00* KP 0.91 LA 1.08 MA 1.44 ! MC 1.14 MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.13 SC 1.00* TC 1.00* ! TS 0.77 WF 1.00* WZ 1.29 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.98 GG 1.00* HN 1.02 ! KK 1.00 KP 0.95 LA 0.98 MA 1.00* ! MC 1.00* MK 1.03 NL 1.00 ON 1.00* ! OV 0.98 PT 1.07 SC 0.94 TC 1.00* ! TS 1.32 WF 1.00 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* GG 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MA 0.00* ! MC 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* GG 1.00* HN 0.89 ! KK 1.00* KP 1.00* LA 1.00* MA 1.00* ! MC 1.00* MK 1.00* NL 1.43 ON 1.00* ! OV 1.00* PT 1.00* SC 1.04 TC 1.00* ! TS 1.00* WF 0.90 WZ 1.00* ! ! ! Fit before self-cal, rms=0.191630Jy sigma=0.001380 ! Fit after self-cal, rms=0.186861Jy sigma=0.001306 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.023 mas, bmaj=2.695 mas, bpa=-2.013 degrees ! Estimated noise=711.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663213 Jy ! Component: 100 - total flux cleaned = 0.00600871 Jy ! Component: 150 - total flux cleaned = 0.00526053 Jy ! Component: 200 - total flux cleaned = 0.00515123 Jy ! Total flux subtracted in 200 components = 0.00515123 Jy ! Clean residual min=-0.010638 max=0.011279 Jy/beam ! Clean residual mean=-0.000592 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 0.833086 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.833086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186500Jy sigma=0.001301 ! Fit after self-cal, rms=0.186757Jy sigma=0.001300 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186757Jy sigma=0.001300 ! Fit after self-cal, rms=0.182621Jy sigma=0.001217 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.022 mas, bmaj=2.695 mas, bpa=-1.925 degrees ! Estimated noise=712.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197905 Jy ! Component: 100 - total flux cleaned = 0.0023178 Jy ! Component: 150 - total flux cleaned = 0.00241322 Jy ! Component: 200 - total flux cleaned = 0.00233266 Jy ! Total flux subtracted in 200 components = 0.00233266 Jy ! Clean residual min=-0.006324 max=0.004582 Jy/beam ! Clean residual mean=-0.000028 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.835418 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.835418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182519Jy sigma=0.001216 ! Fit after self-cal, rms=0.182574Jy sigma=0.001216 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013412 Jy ! Component: 100 - total flux cleaned = 0.000210271 Jy ! Component: 150 - total flux cleaned = 0.000138747 Jy ! Component: 200 - total flux cleaned = 0.000138549 Jy ! Total flux subtracted in 200 components = 0.000138549 Jy ! Clean residual min=-0.006117 max=0.004420 Jy/beam ! Clean residual mean=-0.000032 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.835557 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.835557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182519Jy sigma=0.001215 ! Fit after self-cal, rms=0.182525Jy sigma=0.001215 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182525Jy sigma=0.001215 ! Fit after self-cal, rms=0.183914Jy sigma=0.001187 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.026 mas, bmaj=2.692 mas, bpa=-1.882 degrees ! Estimated noise=711.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358753 Jy ! Component: 100 - total flux cleaned = -0.000442724 Jy ! Component: 150 - total flux cleaned = -0.000666742 Jy ! Component: 200 - total flux cleaned = -0.000668524 Jy ! Total flux subtracted in 200 components = -0.000668524 Jy ! Clean residual min=-0.005044 max=0.003557 Jy/beam ! Clean residual mean=0.000081 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.834888 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.834889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183816Jy sigma=0.001186 ! Fit after self-cal, rms=0.183824Jy sigma=0.001186 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175524 Jy ! Component: 100 - total flux cleaned = -0.000110973 Jy ! Component: 150 - total flux cleaned = -5.41265e-05 Jy ! Component: 200 - total flux cleaned = -5.34101e-05 Jy ! Total flux subtracted in 200 components = -5.34101e-05 Jy ! Clean residual min=-0.004780 max=0.003601 Jy/beam ! Clean residual mean=0.000082 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.834835 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.834835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183787Jy sigma=0.001185 ! Fit after self-cal, rms=0.183791Jy sigma=0.001185 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183791Jy sigma=0.001185 ! Fit after self-cal, rms=0.183843Jy sigma=0.001185 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=2.421 mas, bmaj=3.904 mas, bpa=-13.29 degrees ! Estimated noise=831.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105017 Jy ! Component: 100 - total flux cleaned = -0.00123586 Jy ! Component: 150 - total flux cleaned = -0.00137538 Jy ! Component: 200 - total flux cleaned = -0.00148218 Jy ! Total flux subtracted in 200 components = -0.00148218 Jy ! Clean residual min=-0.003241 max=0.002853 Jy/beam ! Clean residual mean=0.000174 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.833353 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.833353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183840Jy sigma=0.001185 ! Fit after self-cal, rms=0.183789Jy sigma=0.001185 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146343 Jy ! Component: 100 - total flux cleaned = 0.000143258 Jy ! Component: 150 - total flux cleaned = 0.000108829 Jy ! Component: 200 - total flux cleaned = 0.000108188 Jy ! Total flux subtracted in 200 components = 0.000108188 Jy ! Clean residual min=-0.002835 max=0.002803 Jy/beam ! Clean residual mean=0.000170 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.833461 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.833461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183808Jy sigma=0.001185 ! Fit after self-cal, rms=0.183797Jy sigma=0.001185 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.029 mas, bmaj=2.69 mas, bpa=-1.893 degrees ! Estimated noise=711.375 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.029 x 2.69 at -1.893 degrees (North through East) ! Clean map min=-0.0042988 max=0.70605 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183797Jy sigma=0.001185 ! Fit after self-cal, rms=0.252141Jy sigma=0.001049 ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.031 mas, bmaj=2.689 mas, bpa=-1.898 degrees ! Estimated noise=709.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986525 Jy ! Component: 100 - total flux cleaned = -0.000990935 Jy ! Component: 150 - total flux cleaned = -0.00104222 Jy ! Component: 200 - total flux cleaned = -0.00109026 Jy ! Total flux subtracted in 200 components = -0.00109026 Jy ! Clean residual min=-0.004266 max=0.003354 Jy/beam ! Clean residual mean=0.000045 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.832371 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.832371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252109Jy sigma=0.001049 ! Fit after self-cal, rms=0.252115Jy sigma=0.001048 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234735 Jy ! Component: 100 - total flux cleaned = -0.000190917 Jy ! Component: 150 - total flux cleaned = -0.000152445 Jy ! Component: 200 - total flux cleaned = -0.000155389 Jy ! Total flux subtracted in 200 components = -0.000155389 Jy ! Clean residual min=-0.004132 max=0.003495 Jy/beam ! Clean residual mean=0.000048 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.832215 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.832215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252098Jy sigma=0.001048 ! Fit after self-cal, rms=0.252103Jy sigma=0.001048 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252103Jy sigma=0.001048 ! Fit after self-cal, rms=0.252359Jy sigma=0.001048 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=0.6528 mas, bmaj=1.979 mas, bpa=1.931 degrees ! Estimated noise=1299.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.516052 Jy ! Component: 100 - total flux cleaned = 0.659761 Jy ! Component: 150 - total flux cleaned = 0.721887 Jy ! Component: 200 - total flux cleaned = 0.75726 Jy ! Total flux subtracted in 200 components = 0.75726 Jy ! Clean residual min=-0.009475 max=0.018309 Jy/beam ! Clean residual mean=0.000178 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 0.75726 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.75726 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.035 mas, bmaj=2.687 mas, bpa=-1.928 degrees ! Estimated noise=710.116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354594 Jy ! Component: 100 - total flux cleaned = 0.0530648 Jy ! Component: 150 - total flux cleaned = 0.0626975 Jy ! Component: 200 - total flux cleaned = 0.0682247 Jy ! Total flux subtracted in 200 components = 0.0682247 Jy ! Clean residual min=-0.003906 max=0.006821 Jy/beam ! Clean residual mean=0.000197 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.825485 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.825485 Jy ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Added new window around map position (-3, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391539 Jy ! Component: 100 - total flux cleaned = 0.00537722 Jy ! Component: 150 - total flux cleaned = 0.00663271 Jy ! Component: 200 - total flux cleaned = 0.00721323 Jy ! Total flux subtracted in 200 components = 0.00721323 Jy ! Clean residual min=-0.003348 max=0.002472 Jy/beam ! Clean residual mean=0.000025 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.832698 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.832698 Jy ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=2.423 mas, bmaj=3.898 mas, bpa=-13.22 degrees ! Estimated noise=829.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857434 Jy ! Component: 100 - total flux cleaned = 0.000781023 Jy ! Component: 150 - total flux cleaned = 0.000748726 Jy ! Component: 200 - total flux cleaned = 0.000721485 Jy ! Total flux subtracted in 200 components = 0.000721485 Jy ! Clean residual min=-0.002265 max=0.002315 Jy/beam ! Clean residual mean=0.000025 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.833419 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.99476e-05 Jy ! Component: 100 - total flux cleaned = -0.000138804 Jy ! Component: 150 - total flux cleaned = -0.000199832 Jy ! Component: 200 - total flux cleaned = -0.000275675 Jy ! Total flux subtracted in 200 components = -0.000275675 Jy ! Clean residual min=-0.002292 max=0.002282 Jy/beam ! Clean residual mean=0.000039 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.833144 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.833144 Jy ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! Estimated beam: bmin=1.035 mas, bmaj=2.687 mas, bpa=-1.928 degrees ! Estimated noise=710.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293848 Jy ! Component: 100 - total flux cleaned = 0.000218831 Jy ! Component: 150 - total flux cleaned = 0.000287008 Jy ! Component: 200 - total flux cleaned = 0.000414649 Jy ! Total flux subtracted in 200 components = 0.000414649 Jy ! Clean residual min=-0.003155 max=0.002245 Jy/beam ! Clean residual mean=0.000012 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.833558 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.833558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252318Jy sigma=0.001049 ! Fit after self-cal, rms=0.252357Jy sigma=0.001048 wmodel J1147-0724_X_2003_05_07_pus_map.mod ! Writing 83 model components to file: J1147-0724_X_2003_05_07_pus_map.mod wobs J1147-0724_X_2003_05_07_pus_uvs.fits ! Writing UV FITS file: J1147-0724_X_2003_05_07_pus_uvs.fits wwins J1147-0724_X_2003_05_07_pus_map.win ! wwins: Wrote 3 windows to J1147-0724_X_2003_05_07_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142967 Jy ! Component: 100 - total flux cleaned = -0.0019804 Jy ! Component: 150 - total flux cleaned = -0.0022747 Jy ! Component: 200 - total flux cleaned = -0.00247342 Jy ! Component: 250 - total flux cleaned = -0.00258896 Jy ! Component: 300 - total flux cleaned = -0.0027744 Jy ! Component: 350 - total flux cleaned = -0.0029179 Jy ! Component: 400 - total flux cleaned = -0.00302267 Jy ! Component: 450 - total flux cleaned = -0.00309052 Jy ! Component: 500 - total flux cleaned = -0.00312347 Jy ! Component: 550 - total flux cleaned = -0.00315599 Jy ! Component: 600 - total flux cleaned = -0.00312365 Jy ! Component: 650 - total flux cleaned = -0.0030301 Jy ! Component: 700 - total flux cleaned = -0.00296894 Jy ! Component: 750 - total flux cleaned = -0.0029388 Jy ! Component: 800 - total flux cleaned = -0.00281925 Jy ! Component: 850 - total flux cleaned = -0.00270166 Jy ! Component: 900 - total flux cleaned = -0.00264327 Jy ! Component: 950 - total flux cleaned = -0.00255691 Jy ! Component: 1000 - total flux cleaned = -0.00241488 Jy ! Total flux subtracted in 1024 components = -0.00235885 Jy ! Clean residual min=-0.001735 max=0.001658 Jy/beam ! Clean residual mean=0.000053 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.831199 Jy keep ! Adding 59 model components to the UV plane model. ! The established model now contains 141 components and 0.8312 Jy wmap "J1147-0724_X_2003_05_07_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.035 x 2.687 at -1.928 degrees (North through East) ! Clean map min=-0.0031472 max=0.70837 Jy/beam ! Writing clean map to FITS file: J1147-0724_X_2003_05_07_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.708367 invert ! Inverting map ! Your choice of large map pixels excluded 2.23% of the data. ! The x-axis pixel size should ideally be below 0.1874 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000607978 device "J1147-0724_X_2003_05_07_pus\_map.eps/VPS" ! Attempting to open device: 'J1147-0724_X_2003_05_07_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257484 0.257484 0.514969 1.02994 2.05987 4.11975 8.2395 16.479 32.958 65.916 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.708 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.035 x 2.687 at -1.928 degrees (North through East) ! Clean map min=-0.0031472 max=0.70837 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1147-0724_X_2003_05_07_pus\_map.gif/vgif" ! Attempting to open device: 'J1147-0724_X_2003_05_07_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1147-0724_X_2003_05_07_pus_uvs.log closed on Thu Dec 14 15:31:56 2006