! Started logfile: J1733-1304_X_2001_10_29_pus_uvs.log on Mon Feb 25 17:57:51 2008 obs J1733-1304_X_2001_10_29_pus_uva.fits ! Reading UV FITS file: J1733-1304_X_2001_10_29_pus_uva.fits ! AN table 1: 17 integrations on 153 of 153 possible baselines. ! AN table 2: 153 integrations on 153 of 153 possible baselines. ! AN table 3: 80 integrations on 153 of 153 possible baselines. ! AN table 4: 20 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0779714 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1974 lines of history. ! ! Reading 12884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1733-1304_X_2001_10_29_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 2015 telescope corrections were flagged in sub-array 2. ! A total of 1283 telescope corrections were flagged in sub-array 3. ! A total of 360 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 2015 telescope corrections were flagged in sub-array 2. ! A total of 1283 telescope corrections were flagged in sub-array 3. ! A total of 360 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 2015 telescope corrections were flagged in sub-array 2. ! A total of 1283 telescope corrections were flagged in sub-array 3. ! A total of 360 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 2015 telescope corrections were flagged in sub-array 2. ! A total of 1283 telescope corrections were flagged in sub-array 3. ! A total of 360 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.563035Jy sigma=0.013054 ! Fit after self-cal, rms=1.156670Jy sigma=0.009644 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5054 mas, bmaj=1.243 mas, bpa=-0.3998 degrees ! Estimated noise=1276.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52593 Jy ! Component: 100 - total flux cleaned = 1.89949 Jy ! Total flux subtracted in 100 components = 1.89949 Jy ! Clean residual min=-0.081397 max=0.256204 Jy/beam ! Clean residual mean=0.001445 rms=0.020347 Jy/beam ! Combined flux in latest and established models = 1.89949 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.89949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.615349Jy sigma=0.004968 ! Fit after self-cal, rms=0.614590Jy sigma=0.004966 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (0.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247439 Jy ! Component: 100 - total flux cleaned = 0.403868 Jy ! Total flux subtracted in 100 components = 0.403868 Jy ! Clean residual min=-0.061097 max=0.182061 Jy/beam ! Clean residual mean=0.001134 rms=0.014281 Jy/beam ! Combined flux in latest and established models = 2.30335 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 2.30335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465927Jy sigma=0.003557 ! Fit after self-cal, rms=0.455194Jy sigma=0.003477 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137652 Jy ! Component: 100 - total flux cleaned = 0.225507 Jy ! Total flux subtracted in 100 components = 0.225507 Jy ! Clean residual min=-0.042781 max=0.110208 Jy/beam ! Clean residual mean=0.000962 rms=0.010829 Jy/beam ! Combined flux in latest and established models = 2.52886 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 2.52886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391424Jy sigma=0.002824 ! Fit after self-cal, rms=0.386458Jy sigma=0.002787 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (0, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961355 Jy ! Component: 100 - total flux cleaned = 0.160283 Jy ! Total flux subtracted in 100 components = 0.160283 Jy ! Clean residual min=-0.034543 max=0.072563 Jy/beam ! Clean residual mean=0.000839 rms=0.008735 Jy/beam ! Combined flux in latest and established models = 2.68914 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 2.68914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348803Jy sigma=0.002391 ! Fit after self-cal, rms=0.345191Jy sigma=0.002364 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (0.8, 3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0687657 Jy ! Component: 100 - total flux cleaned = 0.118229 Jy ! Total flux subtracted in 100 components = 0.118229 Jy ! Clean residual min=-0.029625 max=0.051408 Jy/beam ! Clean residual mean=0.000748 rms=0.007382 Jy/beam ! Combined flux in latest and established models = 2.80737 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 2.80737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322442Jy sigma=0.002124 ! Fit after self-cal, rms=0.321009Jy sigma=0.002113 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (1.6, 5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527849 Jy ! Component: 100 - total flux cleaned = 0.092135 Jy ! Total flux subtracted in 100 components = 0.092135 Jy ! Clean residual min=-0.027451 max=0.034679 Jy/beam ! Clean residual mean=0.000678 rms=0.006524 Jy/beam ! Combined flux in latest and established models = 2.89951 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 2.89951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307608Jy sigma=0.001962 ! Fit after self-cal, rms=0.306804Jy sigma=0.001957 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5654 mas, bmaj=1.109 mas, bpa=4.043 degrees ! Estimated noise=878.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.068753 Jy ! Component: 100 - total flux cleaned = 0.115137 Jy ! Component: 150 - total flux cleaned = 0.14977 Jy ! Component: 200 - total flux cleaned = 0.176755 Jy ! Total flux subtracted in 200 components = 0.176755 Jy ! Clean residual min=-0.024964 max=0.038713 Jy/beam ! Clean residual mean=0.005110 rms=0.008494 Jy/beam ! Combined flux in latest and established models = 3.07626 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 3.07626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287459Jy sigma=0.001764 ! Fit after self-cal, rms=0.285628Jy sigma=0.001746 ! Inverting map ! Your choice of large map pixels excluded 4.12% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* GG 1.00* HH 1.00* ! HN 0.95 KK 1.02 KP 0.98 LA 0.97 ! MA 1.00* MC 1.00* MK 1.00 NL 0.99 ! OV 0.97 PT 1.00 SC 1.02 TS 1.00* ! WF 0.99 WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.04 ! HN 1.01 KK 1.00* KP 1.05 LA 1.06 ! MA 1.01 MC 1.02 MK 1.00* NL 1.03 ! OV 1.06 PT 1.04 SC 1.02 TS 1.00* ! WF 0.91 WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* GG 1.00* HH 1.00* ! HN 1.00* KK 0.98 KP 1.03 LA 0.97 ! MA 1.00* MC 1.00* MK 1.03 NL 1.00* ! OV 0.99 PT 0.99 SC 1.00* TS 1.02 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* GG 1.00* HH 1.00* ! HN 0.94 KK 1.06 KP 0.99 LA 0.96 ! MA 1.00* MC 1.00* MK 1.00 NL 0.94 ! OV 0.98 PT 0.98 SC 0.97 TS 1.00* ! WF 0.96 WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.02 ! HN 1.01 KK 1.00* KP 1.06 LA 1.04 ! MA 0.99 MC 1.06 MK 1.00* NL 0.98 ! OV 1.07 PT 1.01 SC 0.97 TS 1.00* ! WF 0.90 WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* GG 1.00* HH 1.00* ! HN 1.00* KK 1.03 KP 1.04 LA 0.95 ! MA 1.00* MC 1.00* MK 1.01 NL 1.00* ! OV 0.99 PT 0.97 SC 1.00* TS 1.02 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* GG 1.00* HH 1.00* ! HN 0.94 KK 1.01 KP 0.97 LA 0.99 ! MA 1.00* MC 1.00* MK 1.00 NL 0.97 ! OV 0.95 PT 1.00 SC 0.98 TS 1.00* ! WF 0.99 WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.00 ! HN 1.00 KK 1.00* KP 1.04 LA 1.06 ! MA 1.01 MC 1.02 MK 1.00* NL 1.01 ! OV 1.05 PT 1.03 SC 0.98 TS 1.00* ! WF 0.93 WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* GG 1.00* HH 1.00* ! HN 1.00* KK 0.96 KP 1.02 LA 0.97 ! MA 1.00* MC 1.00* MK 1.01 NL 1.00* ! OV 0.97 PT 1.00 SC 1.00* TS 0.97 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* GG 1.00* HH 1.00* ! HN 0.95 KK 0.99 KP 1.00 LA 0.97 ! MA 1.00* MC 1.00* MK 1.03 NL 0.99 ! OV 0.94 PT 0.99 SC 1.02 TS 1.00* ! WF 0.98 WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.01 ! HN 1.01 KK 1.00* KP 1.07 LA 1.04 ! MA 0.99 MC 1.06 MK 1.00* NL 1.02 ! OV 1.01 PT 1.04 SC 1.02 TS 1.00* ! WF 0.93 WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00* GG 1.00* HH 1.00* ! HN 1.00* KK 0.98 KP 1.04 LA 0.95 ! MA 1.00* MC 1.00* MK 1.03 NL 1.00* ! OV 0.95 PT 0.99 SC 1.00* TS 0.98 ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.285628Jy sigma=0.001746 ! Fit after self-cal, rms=0.261913Jy sigma=0.001524 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5712 mas, bmaj=1.125 mas, bpa=4.462 degrees ! Estimated noise=887.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 23.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323605 Jy ! Component: 100 - total flux cleaned = 0.0539218 Jy ! Component: 150 - total flux cleaned = 0.067147 Jy ! Component: 200 - total flux cleaned = 0.0783772 Jy ! Total flux subtracted in 200 components = 0.0783772 Jy ! Clean residual min=-0.020569 max=0.025603 Jy/beam ! Clean residual mean=0.002265 rms=0.005789 Jy/beam ! Combined flux in latest and established models = 3.15464 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 108 components and 3.15464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256683Jy sigma=0.001463 ! Fit after self-cal, rms=0.256130Jy sigma=0.001459 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256130Jy sigma=0.001459 ! Fit after self-cal, rms=0.253417Jy sigma=0.001430 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5726 mas, bmaj=1.126 mas, bpa=4.424 degrees ! Estimated noise=889.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125211 Jy ! Component: 100 - total flux cleaned = 0.0212709 Jy ! Component: 150 - total flux cleaned = 0.0285882 Jy ! Component: 200 - total flux cleaned = 0.0344143 Jy ! Total flux subtracted in 200 components = 0.0344143 Jy ! Clean residual min=-0.018389 max=0.022690 Jy/beam ! Clean residual mean=0.001850 rms=0.004693 Jy/beam ! Combined flux in latest and established models = 3.18905 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 126 components and 3.18905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250990Jy sigma=0.001403 ! Fit after self-cal, rms=0.250763Jy sigma=0.001401 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201496 Jy ! Component: 100 - total flux cleaned = 0.0317138 Jy ! Component: 150 - total flux cleaned = 0.0388488 Jy ! Component: 200 - total flux cleaned = 0.0448792 Jy ! Total flux subtracted in 200 components = 0.0448792 Jy ! Clean residual min=-0.017526 max=0.019188 Jy/beam ! Clean residual mean=0.001413 rms=0.004221 Jy/beam ! Combined flux in latest and established models = 3.23393 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 148 components and 3.23393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248492Jy sigma=0.001382 ! Fit after self-cal, rms=0.248334Jy sigma=0.001380 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (5, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183713 Jy ! Component: 100 - total flux cleaned = 0.0299839 Jy ! Component: 150 - total flux cleaned = 0.037724 Jy ! Component: 200 - total flux cleaned = 0.0442004 Jy ! Total flux subtracted in 200 components = 0.0442004 Jy ! Clean residual min=-0.017691 max=0.015503 Jy/beam ! Clean residual mean=0.000969 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 3.27813 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 173 components and 3.27813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246470Jy sigma=0.001363 ! Fit after self-cal, rms=0.246371Jy sigma=0.001363 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246371Jy sigma=0.001363 ! Fit after self-cal, rms=0.247346Jy sigma=0.001357 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5737 mas, bmaj=1.13 mas, bpa=4.383 degrees ! Estimated noise=891.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439244 Jy ! Component: 100 - total flux cleaned = 0.00999264 Jy ! Component: 150 - total flux cleaned = 0.0149294 Jy ! Component: 200 - total flux cleaned = 0.0187925 Jy ! Total flux subtracted in 200 components = 0.0187925 Jy ! Clean residual min=-0.015401 max=0.014384 Jy/beam ! Clean residual mean=0.001026 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 3.29693 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 185 components and 3.29693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246294Jy sigma=0.001348 ! Fit after self-cal, rms=0.246215Jy sigma=0.001347 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029457 Jy ! Component: 100 - total flux cleaned = 0.00629776 Jy ! Component: 150 - total flux cleaned = 0.00938505 Jy ! Component: 200 - total flux cleaned = 0.0122744 Jy ! Total flux subtracted in 200 components = 0.0122744 Jy ! Clean residual min=-0.014794 max=0.013769 Jy/beam ! Clean residual mean=0.000905 rms=0.003301 Jy/beam ! Combined flux in latest and established models = 3.3092 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 190 components and 3.3092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245721Jy sigma=0.001342 ! Fit after self-cal, rms=0.245676Jy sigma=0.001342 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245676Jy sigma=0.001342 ! Fit after self-cal, rms=0.246486Jy sigma=0.001340 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=2.214 mas, bmaj=3.12 mas, bpa=-1.039 degrees ! Estimated noise=1276.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211956 Jy ! Component: 100 - total flux cleaned = 0.0356193 Jy ! Component: 150 - total flux cleaned = 0.0420504 Jy ! Component: 200 - total flux cleaned = 0.0466513 Jy ! Total flux subtracted in 200 components = 0.0466513 Jy ! Clean residual min=-0.022020 max=0.026657 Jy/beam ! Clean residual mean=0.001736 rms=0.006909 Jy/beam ! Combined flux in latest and established models = 3.35585 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 200 components and 3.35585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246456Jy sigma=0.001338 ! Fit after self-cal, rms=0.246355Jy sigma=0.001337 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501027 Jy ! Component: 100 - total flux cleaned = 0.00905164 Jy ! Component: 150 - total flux cleaned = 0.0113965 Jy ! Component: 200 - total flux cleaned = 0.0134829 Jy ! Total flux subtracted in 200 components = 0.0134829 Jy ! Clean residual min=-0.021393 max=0.025778 Jy/beam ! Clean residual mean=0.001303 rms=0.006696 Jy/beam ! Combined flux in latest and established models = 3.36933 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 203 components and 3.36933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246667Jy sigma=0.001339 ! Fit after self-cal, rms=0.246632Jy sigma=0.001339 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5745 mas, bmaj=1.132 mas, bpa=4.341 degrees ! Estimated noise=892.314 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5745 x 1.132 at 4.341 degrees (North through East) ! Clean map min=-0.011097 max=1.8868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246632Jy sigma=0.001339 ! Fit after self-cal, rms=0.225305Jy sigma=0.001190 ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5745 mas, bmaj=1.129 mas, bpa=4.455 degrees ! Estimated noise=893.762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534958 Jy ! Component: 100 - total flux cleaned = 0.000804061 Jy ! Component: 150 - total flux cleaned = 0.000559434 Jy ! Component: 200 - total flux cleaned = 0.000565986 Jy ! Total flux subtracted in 200 components = 0.000565986 Jy ! Clean residual min=-0.009872 max=0.012821 Jy/beam ! Clean residual mean=0.000692 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 3.3699 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 214 components and 3.3699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224670Jy sigma=0.001185 ! Fit after self-cal, rms=0.224639Jy sigma=0.001184 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (-11.6, 38.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115779 Jy ! Component: 100 - total flux cleaned = 0.0156252 Jy ! Component: 150 - total flux cleaned = 0.0165053 Jy ! Component: 200 - total flux cleaned = 0.0167072 Jy ! Total flux subtracted in 200 components = 0.0167072 Jy ! Clean residual min=-0.009930 max=0.011867 Jy/beam ! Clean residual mean=0.000582 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 3.38661 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 229 components and 3.38661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223893Jy sigma=0.001176 ! Fit after self-cal, rms=0.223863Jy sigma=0.001175 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (-5.8, 20.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108538 Jy ! Component: 100 - total flux cleaned = 0.0164694 Jy ! Component: 150 - total flux cleaned = 0.018917 Jy ! Component: 200 - total flux cleaned = 0.0199379 Jy ! Total flux subtracted in 200 components = 0.0199379 Jy ! Clean residual min=-0.009275 max=0.010173 Jy/beam ! Clean residual mean=0.000410 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 3.40654 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 252 components and 3.40654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223204Jy sigma=0.001167 ! Fit after self-cal, rms=0.223098Jy sigma=0.001167 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (2.6, 28.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109249 Jy ! Component: 100 - total flux cleaned = 0.0164121 Jy ! Component: 150 - total flux cleaned = 0.0183113 Jy ! Component: 200 - total flux cleaned = 0.0196366 Jy ! Total flux subtracted in 200 components = 0.0196366 Jy ! Clean residual min=-0.008740 max=0.008868 Jy/beam ! Clean residual mean=0.000218 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 3.42618 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 272 components and 3.42618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222448Jy sigma=0.001159 ! Fit after self-cal, rms=0.222400Jy sigma=0.001158 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (-6.2, 38.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851623 Jy ! Component: 100 - total flux cleaned = 0.0132425 Jy ! Component: 150 - total flux cleaned = 0.0156866 Jy ! Component: 200 - total flux cleaned = 0.0168105 Jy ! Total flux subtracted in 200 components = 0.0168105 Jy ! Clean residual min=-0.008221 max=0.008270 Jy/beam ! Clean residual mean=0.000081 rms=0.002041 Jy/beam ! Combined flux in latest and established models = 3.44299 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 296 components and 3.44299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222064Jy sigma=0.001153 ! Fit after self-cal, rms=0.222039Jy sigma=0.001153 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222039Jy sigma=0.001153 ! Fit after self-cal, rms=0.222255Jy sigma=0.001151 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5144 mas, bmaj=1.263 mas, bpa=-0.4175 degrees ! Estimated noise=1282.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51934 Jy ! Component: 100 - total flux cleaned = 1.98409 Jy ! Component: 150 - total flux cleaned = 2.23841 Jy ! Component: 200 - total flux cleaned = 2.41062 Jy ! Total flux subtracted in 200 components = 2.41062 Jy ! Clean residual min=-0.035240 max=0.094899 Jy/beam ! Clean residual mean=0.000991 rms=0.010877 Jy/beam ! Combined flux in latest and established models = 2.41062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 2.41062 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5749 mas, bmaj=1.13 mas, bpa=4.427 degrees ! Estimated noise=893.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183463 Jy ! Component: 100 - total flux cleaned = 0.306582 Jy ! Component: 150 - total flux cleaned = 0.399177 Jy ! Component: 200 - total flux cleaned = 0.471022 Jy ! Total flux subtracted in 200 components = 0.471022 Jy ! Clean residual min=-0.022305 max=0.043173 Jy/beam ! Clean residual mean=0.005608 rms=0.008301 Jy/beam ! Combined flux in latest and established models = 2.88164 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 73 components and 2.88164 Jy ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (0.8, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566353 Jy ! Component: 100 - total flux cleaned = 0.103175 Jy ! Component: 150 - total flux cleaned = 0.143089 Jy ! Component: 200 - total flux cleaned = 0.17768 Jy ! Total flux subtracted in 200 components = 0.17768 Jy ! Clean residual min=-0.015502 max=0.026446 Jy/beam ! Clean residual mean=0.003927 rms=0.005577 Jy/beam ! Combined flux in latest and established models = 3.05932 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 123 components and 3.05932 Jy ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Added new window around map position (-0.8, 22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317217 Jy ! Component: 100 - total flux cleaned = 0.0590137 Jy ! Component: 150 - total flux cleaned = 0.0834388 Jy ! Component: 200 - total flux cleaned = 0.105606 Jy ! Total flux subtracted in 200 components = 0.105606 Jy ! Clean residual min=-0.012648 max=0.017620 Jy/beam ! Clean residual mean=0.002932 rms=0.004213 Jy/beam ! Combined flux in latest and established models = 3.16493 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 174 components and 3.16493 Jy ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=2.215 mas, bmaj=3.123 mas, bpa=-1.062 degrees ! Estimated noise=1278.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554193 Jy ! Component: 100 - total flux cleaned = 0.0970404 Jy ! Component: 150 - total flux cleaned = 0.130767 Jy ! Component: 200 - total flux cleaned = 0.158781 Jy ! Total flux subtracted in 200 components = 0.158781 Jy ! Clean residual min=-0.020696 max=0.025298 Jy/beam ! Clean residual mean=0.004677 rms=0.007021 Jy/beam ! Combined flux in latest and established models = 3.32371 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235539 Jy ! Component: 100 - total flux cleaned = 0.0436784 Jy ! Component: 150 - total flux cleaned = 0.0609833 Jy ! Component: 200 - total flux cleaned = 0.0759107 Jy ! Total flux subtracted in 200 components = 0.0759107 Jy ! Clean residual min=-0.016043 max=0.018452 Jy/beam ! Clean residual mean=0.002448 rms=0.005040 Jy/beam ! Combined flux in latest and established models = 3.39962 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 301 components and 3.39962 Jy ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! Estimated beam: bmin=0.5749 mas, bmaj=1.13 mas, bpa=4.427 degrees ! Estimated noise=893.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121837 Jy ! Component: 100 - total flux cleaned = 0.0207141 Jy ! Component: 150 - total flux cleaned = 0.0270066 Jy ! Component: 200 - total flux cleaned = 0.032848 Jy ! Total flux subtracted in 200 components = 0.032848 Jy ! Clean residual min=-0.009082 max=0.009746 Jy/beam ! Clean residual mean=0.000443 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 3.43246 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 325 components and 3.43246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222285Jy sigma=0.001143 ! Fit after self-cal, rms=0.221700Jy sigma=0.001139 wmodel J1733-1304_X_2001_10_29_pus_map.mod ! Writing 325 model components to file: J1733-1304_X_2001_10_29_pus_map.mod wobs J1733-1304_X_2001_10_29_pus_uvs.fits ! Writing UV FITS file: J1733-1304_X_2001_10_29_pus_uvs.fits wwins J1733-1304_X_2001_10_29_pus_map.win ! wwins: Wrote 15 windows to J1733-1304_X_2001_10_29_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204153 Jy ! Component: 100 - total flux cleaned = 0.0037509 Jy ! Component: 150 - total flux cleaned = 0.0060755 Jy ! Component: 200 - total flux cleaned = 0.00828707 Jy ! Component: 250 - total flux cleaned = 0.010012 Jy ! Component: 300 - total flux cleaned = 0.0115521 Jy ! Component: 350 - total flux cleaned = 0.0127962 Jy ! Component: 400 - total flux cleaned = 0.0140033 Jy ! Component: 450 - total flux cleaned = 0.0149465 Jy ! Component: 500 - total flux cleaned = 0.0159844 Jy ! Component: 550 - total flux cleaned = 0.016885 Jy ! Component: 600 - total flux cleaned = 0.0174375 Jy ! Component: 650 - total flux cleaned = 0.0181986 Jy ! Component: 700 - total flux cleaned = 0.0190495 Jy ! Component: 750 - total flux cleaned = 0.0195717 Jy ! Component: 800 - total flux cleaned = 0.0200835 Jy ! Component: 850 - total flux cleaned = 0.0202855 Jy ! Component: 900 - total flux cleaned = 0.0207826 Jy ! Component: 950 - total flux cleaned = 0.0208802 Jy ! Component: 1000 - total flux cleaned = 0.0212658 Jy ! Component: 1050 - total flux cleaned = 0.021551 Jy ! Component: 1100 - total flux cleaned = 0.0215506 Jy ! Component: 1150 - total flux cleaned = 0.0216439 Jy ! Component: 1200 - total flux cleaned = 0.0220085 Jy ! Component: 1250 - total flux cleaned = 0.0219191 Jy ! Component: 1300 - total flux cleaned = 0.0222762 Jy ! Component: 1350 - total flux cleaned = 0.0225402 Jy ! Component: 1400 - total flux cleaned = 0.0227998 Jy ! Component: 1450 - total flux cleaned = 0.0228849 Jy ! Component: 1500 - total flux cleaned = 0.0232234 Jy ! Component: 1550 - total flux cleaned = 0.0233075 Jy ! Component: 1600 - total flux cleaned = 0.023307 Jy ! Component: 1650 - total flux cleaned = 0.0236334 Jy ! Component: 1700 - total flux cleaned = 0.0234718 Jy ! Component: 1750 - total flux cleaned = 0.0233929 Jy ! Component: 1800 - total flux cleaned = 0.0234729 Jy ! Component: 1850 - total flux cleaned = 0.0233957 Jy ! Component: 1900 - total flux cleaned = 0.0234738 Jy ! Component: 1950 - total flux cleaned = 0.0234752 Jy ! Component: 2000 - total flux cleaned = 0.0238541 Jy ! Component: 2050 - total flux cleaned = 0.0239287 Jy ! Component: 2100 - total flux cleaned = 0.0240029 Jy ! Component: 2150 - total flux cleaned = 0.0240766 Jy ! Component: 2200 - total flux cleaned = 0.0242227 Jy ! Component: 2250 - total flux cleaned = 0.0244391 Jy ! Component: 2300 - total flux cleaned = 0.02451 Jy ! Component: 2350 - total flux cleaned = 0.0246519 Jy ! Component: 2400 - total flux cleaned = 0.0247923 Jy ! Component: 2450 - total flux cleaned = 0.0250009 Jy ! Component: 2500 - total flux cleaned = 0.02507 Jy ! Component: 2550 - total flux cleaned = 0.025207 Jy ! Component: 2600 - total flux cleaned = 0.0254113 Jy ! Component: 2650 - total flux cleaned = 0.0255456 Jy ! Component: 2700 - total flux cleaned = 0.0256792 Jy ! Component: 2750 - total flux cleaned = 0.0258116 Jy ! Component: 2800 - total flux cleaned = 0.025812 Jy ! Component: 2850 - total flux cleaned = 0.0260079 Jy ! Component: 2900 - total flux cleaned = 0.0260729 Jy ! Component: 2950 - total flux cleaned = 0.026202 Jy ! Component: 3000 - total flux cleaned = 0.0262658 Jy ! Component: 3050 - total flux cleaned = 0.0263926 Jy ! Component: 3100 - total flux cleaned = 0.0263918 Jy ! Component: 3150 - total flux cleaned = 0.0264543 Jy ! Component: 3200 - total flux cleaned = 0.0267021 Jy ! Component: 3250 - total flux cleaned = 0.0265787 Jy ! Component: 3300 - total flux cleaned = 0.0267009 Jy ! Component: 3350 - total flux cleaned = 0.0266404 Jy ! Component: 3400 - total flux cleaned = 0.0266406 Jy ! Component: 3450 - total flux cleaned = 0.0265204 Jy ! Component: 3500 - total flux cleaned = 0.0266395 Jy ! Component: 3550 - total flux cleaned = 0.0265806 Jy ! Component: 3600 - total flux cleaned = 0.0265222 Jy ! Component: 3650 - total flux cleaned = 0.0262896 Jy ! Component: 3700 - total flux cleaned = 0.0264058 Jy ! Component: 3750 - total flux cleaned = 0.0263487 Jy ! Component: 3800 - total flux cleaned = 0.0262347 Jy ! Component: 3850 - total flux cleaned = 0.0261781 Jy ! Component: 3900 - total flux cleaned = 0.0259517 Jy ! Component: 3950 - total flux cleaned = 0.0261201 Jy ! Component: 4000 - total flux cleaned = 0.0259525 Jy ! Component: 4050 - total flux cleaned = 0.0257304 Jy ! Total flux subtracted in 4096 components = 0.0256201 Jy ! Clean residual min=-0.003194 max=0.002916 Jy/beam ! Clean residual mean=0.000047 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 3.45808 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 668 components and 3.45808 Jy ![Exited script file: muppet] wmap "J1733-1304_X_2001_10_29_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5749 x 1.13 at 4.427 degrees (North through East) ! Clean map min=-0.0058314 max=1.8725 Jy/beam ! Writing clean map to FITS file: J1733-1304_X_2001_10_29_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.87246 invert ! Inverting map ! Your choice of large map pixels excluded 4.24% of the data. ! The x-axis pixel size should ideally be below 0.1653 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000924209 device "J1733-1304_X_2001_10_29_pus\_map.eps/VPS" ! Attempting to open device: 'J1733-1304_X_2001_10_29_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148074 0.148074 0.296147 0.592295 1.18459 2.36918 4.73836 9.47672 18.9534 37.9069 75.8137 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.872 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5749 x 1.13 at 4.427 degrees (North through East) ! Clean map min=-0.0058314 max=1.8725 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1733-1304_X_2001_10_29_pus\_map.gif/vgif" ! Attempting to open device: 'J1733-1304_X_2001_10_29_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1733-1304_X_2001_10_29_pus_uvs.log closed on Mon Feb 25 17:58:28 2008