! Started logfile: J1507-1652_X_2001_10_29_pus_uvs.log on Mon Feb 25 16:17:36 2008 obs J1507-1652_X_2001_10_29_pus_uva.fits ! Reading UV FITS file: J1507-1652_X_2001_10_29_pus_uva.fits ! AN table 1: 104 integrations on 153 of 153 possible baselines. ! AN table 2: 10 integrations on 153 of 153 possible baselines. ! AN table 3: 108 integrations on 153 of 153 possible baselines. ! AN table 4: 136 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.058075 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1507-1652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1970 lines of history. ! ! Reading 12724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 256 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1507-1652_X_2001_10_29_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1404 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 1338 telescope corrections were flagged in sub-array 3. ! A total of 2224 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1404 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 1338 telescope corrections were flagged in sub-array 3. ! A total of 2224 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1404 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 1338 telescope corrections were flagged in sub-array 3. ! A total of 2224 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1404 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 1338 telescope corrections were flagged in sub-array 3. ! A total of 2224 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.938727Jy sigma=0.007387 ! Fit after self-cal, rms=0.566113Jy sigma=0.003831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.5572 mas, bmaj=1.267 mas, bpa=1.591 degrees ! Estimated noise=1603.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.813925 Jy ! Component: 100 - total flux cleaned = 1.0849 Jy ! Total flux subtracted in 100 components = 1.0849 Jy ! Clean residual min=-0.048313 max=0.125149 Jy/beam ! Clean residual mean=0.003894 rms=0.020166 Jy/beam ! Combined flux in latest and established models = 1.08489 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.08489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518386Jy sigma=0.003378 ! Fit after self-cal, rms=0.517979Jy sigma=0.003375 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143648 Jy ! Component: 100 - total flux cleaned = 0.235131 Jy ! Total flux subtracted in 100 components = 0.235131 Jy ! Clean residual min=-0.035906 max=0.115701 Jy/beam ! Clean residual mean=0.002930 rms=0.014916 Jy/beam ! Combined flux in latest and established models = 1.32003 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 1.32003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452119Jy sigma=0.002560 ! Fit after self-cal, rms=0.451888Jy sigma=0.002556 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (1.6, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105627 Jy ! Component: 100 - total flux cleaned = 0.167227 Jy ! Total flux subtracted in 100 components = 0.167227 Jy ! Clean residual min=-0.028649 max=0.073661 Jy/beam ! Clean residual mean=0.001943 rms=0.011139 Jy/beam ! Combined flux in latest and established models = 1.48725 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 1.48725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416704Jy sigma=0.002044 ! Fit after self-cal, rms=0.413033Jy sigma=0.002010 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (0.6, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747895 Jy ! Component: 100 - total flux cleaned = 0.123799 Jy ! Total flux subtracted in 100 components = 0.123799 Jy ! Clean residual min=-0.023812 max=0.042500 Jy/beam ! Clean residual mean=0.001250 rms=0.008233 Jy/beam ! Combined flux in latest and established models = 1.61105 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 1.61105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394633Jy sigma=0.001706 ! Fit after self-cal, rms=0.392122Jy sigma=0.001679 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8112 mas, bmaj=1.457 mas, bpa=1.317 degrees ! Estimated noise=823.895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669635 Jy ! Component: 100 - total flux cleaned = 0.108722 Jy ! Component: 150 - total flux cleaned = 0.137826 Jy ! Component: 200 - total flux cleaned = 0.158447 Jy ! Total flux subtracted in 200 components = 0.158447 Jy ! Clean residual min=-0.019762 max=0.039097 Jy/beam ! Clean residual mean=0.002430 rms=0.007060 Jy/beam ! Combined flux in latest and established models = 1.7695 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 1.7695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380411Jy sigma=0.001444 ! Fit after self-cal, rms=0.378622Jy sigma=0.001425 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (-0.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352069 Jy ! Component: 100 - total flux cleaned = 0.0532056 Jy ! Component: 150 - total flux cleaned = 0.059397 Jy ! Component: 200 - total flux cleaned = 0.064965 Jy ! Total flux subtracted in 200 components = 0.064965 Jy ! Clean residual min=-0.015570 max=0.017877 Jy/beam ! Clean residual mean=0.000791 rms=0.004671 Jy/beam ! Combined flux in latest and established models = 1.83446 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 1.83446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375203Jy sigma=0.001360 ! Fit after self-cal, rms=0.374812Jy sigma=0.001351 ! Inverting map ! Your choice of large map pixels excluded 1.74% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* GG 1.00* HH 1.00* ! HN 1.03 KK 1.00* KP 0.96 LA 0.93 ! MA 1.00* MC 1.00* MK 0.97 NL 0.99 ! OV 0.97 PT 0.94 SC 1.01 TS 1.00* ! WF 1.00 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00* GG 1.00* HH 1.04 ! HN 1.03 KK 0.95 KP 1.01 LA 0.98 ! MA 0.98 MC 1.06 MK 0.96 NL 1.00 ! OV 1.02 PT 1.00 SC 1.02 TS 1.00* ! WF 0.98 WZ 1.19 ! ! A total of 192 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HH 1.07 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 1.01 MC 1.01 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 0.98 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* GG 1.00* HH 1.00* ! HN 1.03 KK 1.00* KP 0.97 LA 0.92 ! MA 1.00* MC 1.00* MK 0.96 NL 0.96 ! OV 0.97 PT 0.93 SC 0.98 TS 1.00* ! WF 0.97 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* GG 1.00* HH 0.96 ! HN 1.03 KK 1.01 KP 1.02 LA 0.96 ! MA 1.01 MC 1.06 MK 0.98 NL 0.97 ! OV 1.01 PT 0.98 SC 0.97 TS 1.00* ! WF 0.98 WZ 1.11 ! ! A total of 192 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HH 0.97 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 1.04 MC 0.95 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 1.03 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* GG 1.00* HH 1.00* ! HN 1.05 KK 1.00* KP 0.96 LA 0.95 ! MA 1.00* MC 1.00* MK 0.96 NL 1.01 ! OV 0.97 PT 0.97 SC 1.00 TS 1.00* ! WF 1.03 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GG 1.00* HH 1.03 ! HN 1.04 KK 0.98 KP 1.01 LA 1.00 ! MA 1.04 MC 1.05 MK 0.97 NL 1.01 ! OV 1.00 PT 1.02 SC 0.99 TS 1.00* ! WF 1.02 WZ 1.15 ! ! A total of 192 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HH 0.93 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 1.04 MC 0.99 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 1.04 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* GG 1.00* HH 1.00* ! HN 1.07 KK 1.00* KP 0.99 LA 0.95 ! MA 1.00* MC 1.00* MK 0.99 NL 1.01 ! OV 0.95 PT 0.97 SC 1.04 TS 1.00* ! WF 1.03 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00* GG 1.00* HH 1.09 ! HN 1.06 KK 0.96 KP 1.04 LA 0.98 ! MA 0.99 MC 1.10 MK 1.01 NL 1.03 ! OV 1.00 PT 1.01 SC 1.05 TS 1.00* ! WF 1.01 WZ 1.06 ! ! A total of 192 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GG 1.00* HH 1.10 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 0.98 MC 1.07 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 0.97 ! ! ! Fit before self-cal, rms=0.374812Jy sigma=0.001351 ! Fit after self-cal, rms=0.394624Jy sigma=0.001261 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.806 mas, bmaj=1.746 mas, bpa=-0.2291 degrees ! Estimated noise=843.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104994 Jy ! Component: 100 - total flux cleaned = 0.0122622 Jy ! Component: 150 - total flux cleaned = 0.014029 Jy ! Component: 200 - total flux cleaned = 0.0150441 Jy ! Total flux subtracted in 200 components = 0.0150441 Jy ! Clean residual min=-0.008921 max=0.011084 Jy/beam ! Clean residual mean=0.001320 rms=0.002908 Jy/beam ! Combined flux in latest and established models = 1.84951 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 1.84951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394019Jy sigma=0.001249 ! Fit after self-cal, rms=0.393968Jy sigma=0.001247 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393968Jy sigma=0.001247 ! Fit after self-cal, rms=0.390278Jy sigma=0.001241 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8067 mas, bmaj=1.745 mas, bpa=-0.2722 degrees ! Estimated noise=843.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041452 Jy ! Component: 100 - total flux cleaned = 0.00470626 Jy ! Component: 150 - total flux cleaned = 0.00496454 Jy ! Component: 200 - total flux cleaned = 0.00542067 Jy ! Total flux subtracted in 200 components = 0.00542067 Jy ! Clean residual min=-0.007355 max=0.010109 Jy/beam ! Clean residual mean=0.001190 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 1.85493 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 1.85493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389874Jy sigma=0.001234 ! Fit after self-cal, rms=0.389752Jy sigma=0.001233 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106213 Jy ! Component: 100 - total flux cleaned = 0.0016987 Jy ! Component: 150 - total flux cleaned = 0.00226514 Jy ! Component: 200 - total flux cleaned = 0.00260597 Jy ! Total flux subtracted in 200 components = 0.00260597 Jy ! Clean residual min=-0.007558 max=0.009206 Jy/beam ! Clean residual mean=0.001113 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 1.85753 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 1.85753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389528Jy sigma=0.001229 ! Fit after self-cal, rms=0.389470Jy sigma=0.001229 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389470Jy sigma=0.001229 ! Fit after self-cal, rms=0.389031Jy sigma=0.001228 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8072 mas, bmaj=1.744 mas, bpa=-0.2452 degrees ! Estimated noise=843.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126806 Jy ! Component: 100 - total flux cleaned = 0.00229352 Jy ! Component: 150 - total flux cleaned = 0.00300945 Jy ! Component: 200 - total flux cleaned = 0.00366022 Jy ! Total flux subtracted in 200 components = 0.00366022 Jy ! Clean residual min=-0.007213 max=0.008668 Jy/beam ! Clean residual mean=0.001077 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 1.86119 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 1.86119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388856Jy sigma=0.001224 ! Fit after self-cal, rms=0.388783Jy sigma=0.001224 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00055639 Jy ! Component: 100 - total flux cleaned = 0.0010334 Jy ! Component: 150 - total flux cleaned = 0.00146477 Jy ! Component: 200 - total flux cleaned = 0.00186164 Jy ! Total flux subtracted in 200 components = 0.00186164 Jy ! Clean residual min=-0.007337 max=0.008019 Jy/beam ! Clean residual mean=0.001025 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 1.86306 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 1.86306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388674Jy sigma=0.001221 ! Fit after self-cal, rms=0.388628Jy sigma=0.001221 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388628Jy sigma=0.001221 ! Fit after self-cal, rms=0.388368Jy sigma=0.001221 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=1.89 mas, bmaj=3.247 mas, bpa=0.6138 degrees ! Estimated noise=1099.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299573 Jy ! Component: 100 - total flux cleaned = 0.00433332 Jy ! Component: 150 - total flux cleaned = 0.00522295 Jy ! Component: 200 - total flux cleaned = 0.00546306 Jy ! Total flux subtracted in 200 components = 0.00546306 Jy ! Clean residual min=-0.005946 max=0.009277 Jy/beam ! Clean residual mean=0.002388 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 1.86852 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 116 components and 1.86852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388305Jy sigma=0.001219 ! Fit after self-cal, rms=0.388259Jy sigma=0.001219 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.30876e-05 Jy ! Component: 100 - total flux cleaned = 0.000782087 Jy ! Component: 150 - total flux cleaned = 0.000979822 Jy ! Component: 200 - total flux cleaned = 0.00115054 Jy ! Total flux subtracted in 200 components = 0.00115054 Jy ! Clean residual min=-0.005522 max=0.008957 Jy/beam ! Clean residual mean=0.002301 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 1.86967 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 1.86967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388262Jy sigma=0.001218 ! Fit after self-cal, rms=0.388217Jy sigma=0.001218 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8076 mas, bmaj=1.743 mas, bpa=-0.2098 degrees ! Estimated noise=842.849 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8076 x 1.743 at -0.2098 degrees (North through East) ! Clean map min=-0.004883 max=1.0802 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388217Jy sigma=0.001218 ! Fit after self-cal, rms=0.394951Jy sigma=0.001062 ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.808 mas, bmaj=1.743 mas, bpa=-0.1156 degrees ! Estimated noise=842.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196665 Jy ! Component: 100 - total flux cleaned = 0.00210019 Jy ! Component: 150 - total flux cleaned = 0.00210278 Jy ! Component: 200 - total flux cleaned = 0.00210843 Jy ! Total flux subtracted in 200 components = 0.00210843 Jy ! Clean residual min=-0.006289 max=0.007013 Jy/beam ! Clean residual mean=0.000864 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 1.87178 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 1.87178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394840Jy sigma=0.001060 ! Fit after self-cal, rms=0.394818Jy sigma=0.001059 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054546 Jy ! Component: 100 - total flux cleaned = 0.000654598 Jy ! Component: 150 - total flux cleaned = 0.000650307 Jy ! Component: 200 - total flux cleaned = 0.000649642 Jy ! Total flux subtracted in 200 components = 0.000649642 Jy ! Clean residual min=-0.006403 max=0.006397 Jy/beam ! Clean residual mean=0.000848 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 1.87243 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 124 components and 1.87243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394742Jy sigma=0.001058 ! Fit after self-cal, rms=0.394720Jy sigma=0.001058 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394720Jy sigma=0.001058 ! Fit after self-cal, rms=0.394694Jy sigma=0.001058 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.5713 mas, bmaj=1.266 mas, bpa=0.8508 degrees ! Estimated noise=1606.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.810753 Jy ! Component: 100 - total flux cleaned = 1.08055 Jy ! Component: 150 - total flux cleaned = 1.24696 Jy ! Component: 200 - total flux cleaned = 1.3689 Jy ! Total flux subtracted in 200 components = 1.3689 Jy ! Clean residual min=-0.028339 max=0.070219 Jy/beam ! Clean residual mean=0.002650 rms=0.012508 Jy/beam ! Combined flux in latest and established models = 1.3689 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.3689 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8082 mas, bmaj=1.742 mas, bpa=-0.08669 degrees ! Estimated noise=841.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149732 Jy ! Component: 100 - total flux cleaned = 0.246525 Jy ! Component: 150 - total flux cleaned = 0.313522 Jy ! Component: 200 - total flux cleaned = 0.36157 Jy ! Total flux subtracted in 200 components = 0.36157 Jy ! Clean residual min=-0.011667 max=0.027905 Jy/beam ! Clean residual mean=0.004702 rms=0.006248 Jy/beam ! Combined flux in latest and established models = 1.73047 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 77 components and 1.73047 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (1.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035172 Jy ! Component: 100 - total flux cleaned = 0.061209 Jy ! Component: 150 - total flux cleaned = 0.0806419 Jy ! Component: 200 - total flux cleaned = 0.0954362 Jy ! Total flux subtracted in 200 components = 0.0954362 Jy ! Clean residual min=-0.004320 max=0.009887 Jy/beam ! Clean residual mean=0.002117 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 1.8259 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 105 components and 1.8259 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (1.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116567 Jy ! Component: 100 - total flux cleaned = 0.0205587 Jy ! Component: 150 - total flux cleaned = 0.0275518 Jy ! Component: 200 - total flux cleaned = 0.033203 Jy ! Total flux subtracted in 200 components = 0.033203 Jy ! Clean residual min=-0.003858 max=0.006245 Jy/beam ! Clean residual mean=0.001208 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 1.85911 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 127 components and 1.85911 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (4.2, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577194 Jy ! Component: 100 - total flux cleaned = 0.00887105 Jy ! Component: 150 - total flux cleaned = 0.0106959 Jy ! Component: 200 - total flux cleaned = 0.0120608 Jy ! Total flux subtracted in 200 components = 0.0120608 Jy ! Clean residual min=-0.003082 max=0.004878 Jy/beam ! Clean residual mean=0.000889 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 1.87117 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 144 components and 1.87117 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (5.2, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414576 Jy ! Component: 100 - total flux cleaned = 0.00621581 Jy ! Component: 150 - total flux cleaned = 0.00767031 Jy ! Component: 200 - total flux cleaned = 0.00881022 Jy ! Total flux subtracted in 200 components = 0.00881022 Jy ! Clean residual min=-0.003022 max=0.004318 Jy/beam ! Clean residual mean=0.000692 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 1.87998 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 1.87998 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Added new window around map position (-3.8, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043151 Jy ! Component: 100 - total flux cleaned = 0.00533917 Jy ! Component: 150 - total flux cleaned = 0.00561005 Jy ! Component: 200 - total flux cleaned = 0.0058561 Jy ! Total flux subtracted in 200 components = 0.0058561 Jy ! Clean residual min=-0.002882 max=0.003748 Jy/beam ! Clean residual mean=0.000543 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 1.88583 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 169 components and 1.88583 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=1.889 mas, bmaj=3.24 mas, bpa=0.7395 degrees ! Estimated noise=1097.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264167 Jy ! Component: 100 - total flux cleaned = 0.00442217 Jy ! Component: 150 - total flux cleaned = 0.00482632 Jy ! Component: 200 - total flux cleaned = 0.00508714 Jy ! Total flux subtracted in 200 components = 0.00508714 Jy ! Clean residual min=-0.003421 max=0.004410 Jy/beam ! Clean residual mean=0.001079 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 1.89092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142665 Jy ! Component: 100 - total flux cleaned = 0.000278067 Jy ! Component: 150 - total flux cleaned = 0.000405232 Jy ! Component: 200 - total flux cleaned = 0.000487069 Jy ! Total flux subtracted in 200 components = 0.000487069 Jy ! Clean residual min=-0.003350 max=0.004376 Jy/beam ! Clean residual mean=0.001050 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 1.89141 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 201 components and 1.89141 Jy ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! Estimated beam: bmin=0.8082 mas, bmaj=1.742 mas, bpa=-0.08669 degrees ! Estimated noise=841.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000904626 Jy ! Component: 100 - total flux cleaned = -0.00113882 Jy ! Component: 150 - total flux cleaned = -0.00128289 Jy ! Component: 200 - total flux cleaned = -0.00135337 Jy ! Total flux subtracted in 200 components = -0.00135337 Jy ! Clean residual min=-0.002717 max=0.003670 Jy/beam ! Clean residual mean=0.000445 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 1.89005 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 218 components and 1.89005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395216Jy sigma=0.001053 ! Fit after self-cal, rms=0.394927Jy sigma=0.001050 wmodel J1507-1652_X_2001_10_29_pus_map.mod ! Writing 218 model components to file: J1507-1652_X_2001_10_29_pus_map.mod wobs J1507-1652_X_2001_10_29_pus_uvs.fits ! Writing UV FITS file: J1507-1652_X_2001_10_29_pus_uvs.fits wwins J1507-1652_X_2001_10_29_pus_map.win ! wwins: Wrote 9 windows to J1507-1652_X_2001_10_29_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156856 Jy ! Component: 100 - total flux cleaned = 0.00299812 Jy ! Component: 150 - total flux cleaned = 0.00430016 Jy ! Component: 200 - total flux cleaned = 0.00512982 Jy ! Component: 250 - total flux cleaned = 0.0057305 Jy ! Component: 300 - total flux cleaned = 0.00631421 Jy ! Component: 350 - total flux cleaned = 0.00683596 Jy ! Component: 400 - total flux cleaned = 0.00734445 Jy ! Component: 450 - total flux cleaned = 0.00784038 Jy ! Component: 500 - total flux cleaned = 0.00819319 Jy ! Component: 550 - total flux cleaned = 0.00862487 Jy ! Component: 600 - total flux cleaned = 0.00896336 Jy ! Component: 650 - total flux cleaned = 0.00933735 Jy ! Component: 700 - total flux cleaned = 0.00970434 Jy ! Component: 750 - total flux cleaned = 0.0101046 Jy ! Component: 800 - total flux cleaned = 0.0104197 Jy ! Component: 850 - total flux cleaned = 0.0107692 Jy ! Component: 900 - total flux cleaned = 0.0111512 Jy ! Component: 950 - total flux cleaned = 0.0114897 Jy ! Component: 1000 - total flux cleaned = 0.0117488 Jy ! Total flux subtracted in 1024 components = 0.0118954 Jy ! Clean residual min=-0.002386 max=0.002007 Jy/beam ! Clean residual mean=0.000172 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 1.90195 Jy keep ! Adding 62 model components to the UV plane model. ! The established model now contains 280 components and 1.90195 Jy ![Exited script file: muppet] wmap "J1507-1652_X_2001_10_29_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8082 x 1.742 at -0.08669 degrees (North through East) ! Clean map min=-0.0025396 max=1.0879 Jy/beam ! Writing clean map to FITS file: J1507-1652_X_2001_10_29_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.08791 invert ! Inverting map ! Your choice of large map pixels excluded 1.91% of the data. ! The x-axis pixel size should ideally be below 0.1609 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000657238 device "J1507-1652_X_2001_10_29_pus\_map.eps/VPS" ! Attempting to open device: 'J1507-1652_X_2001_10_29_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.181238 0.181238 0.362477 0.724954 1.44991 2.89982 5.79963 11.5993 23.1985 46.397 92.7941 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8082 x 1.742 at -0.08669 degrees (North through East) ! Clean map min=-0.0025396 max=1.0879 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1507-1652_X_2001_10_29_pus\_map.gif/vgif" ! Attempting to open device: 'J1507-1652_X_2001_10_29_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1507-1652_X_2001_10_29_pus_uvs.log closed on Mon Feb 25 16:17:45 2008