! Started logfile: J0241-0815_X_2001_10_29_pus_uvs.log on Mon Feb 25 16:37:50 2008 obs J0241-0815_X_2001_10_29_pus_uva.fits ! Reading UV FITS file: J0241-0815_X_2001_10_29_pus_uva.fits ! AN table 1: 32 integrations on 153 of 153 possible baselines. ! AN table 2: 125 integrations on 153 of 153 possible baselines. ! AN table 3: 96 integrations on 153 of 153 possible baselines. ! AN table 4: 34 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0586413 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0241-0815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1970 lines of history. ! ! Reading 10300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0241-0815_X_2001_10_29_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 429 telescope corrections were flagged in sub-array 1. ! A total of 2042 telescope corrections were flagged in sub-array 2. ! A total of 1304 telescope corrections were flagged in sub-array 3. ! A total of 582 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 429 telescope corrections were flagged in sub-array 1. ! A total of 2042 telescope corrections were flagged in sub-array 2. ! A total of 1304 telescope corrections were flagged in sub-array 3. ! A total of 582 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 429 telescope corrections were flagged in sub-array 1. ! A total of 2042 telescope corrections were flagged in sub-array 2. ! A total of 1304 telescope corrections were flagged in sub-array 3. ! A total of 582 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 429 telescope corrections were flagged in sub-array 1. ! A total of 2042 telescope corrections were flagged in sub-array 2. ! A total of 1304 telescope corrections were flagged in sub-array 3. ! A total of 582 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.827080Jy sigma=0.007333 ! Fit after self-cal, rms=0.611020Jy sigma=0.005369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.5662 mas, bmaj=1.659 mas, bpa=-2.87 degrees ! Estimated noise=1118.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34111 Jy ! Component: 100 - total flux cleaned = 0.491921 Jy ! Total flux subtracted in 100 components = 0.491921 Jy ! Clean residual min=-0.026211 max=0.088524 Jy/beam ! Clean residual mean=0.001727 rms=0.009473 Jy/beam ! Combined flux in latest and established models = 0.491921 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.491921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310746Jy sigma=0.002502 ! Fit after self-cal, rms=0.309909Jy sigma=0.002496 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946314 Jy ! Component: 100 - total flux cleaned = 0.151959 Jy ! Total flux subtracted in 100 components = 0.151959 Jy ! Clean residual min=-0.020245 max=0.047132 Jy/beam ! Clean residual mean=0.001415 rms=0.006831 Jy/beam ! Combined flux in latest and established models = 0.64388 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.64388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252758Jy sigma=0.001982 ! Fit after self-cal, rms=0.251718Jy sigma=0.001968 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (5.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536407 Jy ! Component: 100 - total flux cleaned = 0.0913 Jy ! Total flux subtracted in 100 components = 0.0913 Jy ! Clean residual min=-0.016147 max=0.044728 Jy/beam ! Clean residual mean=0.001243 rms=0.005572 Jy/beam ! Combined flux in latest and established models = 0.73518 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.735181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227990Jy sigma=0.001745 ! Fit after self-cal, rms=0.226971Jy sigma=0.001737 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (4.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428192 Jy ! Component: 100 - total flux cleaned = 0.072753 Jy ! Total flux subtracted in 100 components = 0.072753 Jy ! Clean residual min=-0.012744 max=0.033894 Jy/beam ! Clean residual mean=0.001096 rms=0.004547 Jy/beam ! Combined flux in latest and established models = 0.807934 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.807934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210711Jy sigma=0.001581 ! Fit after self-cal, rms=0.209831Jy sigma=0.001574 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (-3.8, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326263 Jy ! Component: 100 - total flux cleaned = 0.0566574 Jy ! Total flux subtracted in 100 components = 0.0566574 Jy ! Clean residual min=-0.011149 max=0.021992 Jy/beam ! Clean residual mean=0.000975 rms=0.003835 Jy/beam ! Combined flux in latest and established models = 0.864591 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.864591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199082Jy sigma=0.001479 ! Fit after self-cal, rms=0.198952Jy sigma=0.001476 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6768 mas, bmaj=1.75 mas, bpa=-4.727 degrees ! Estimated noise=829.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406103 Jy ! Component: 100 - total flux cleaned = 0.0723321 Jy ! Component: 150 - total flux cleaned = 0.0976298 Jy ! Component: 200 - total flux cleaned = 0.118 Jy ! Total flux subtracted in 200 components = 0.118 Jy ! Clean residual min=-0.014051 max=0.026251 Jy/beam ! Clean residual mean=0.002094 rms=0.004989 Jy/beam ! Combined flux in latest and established models = 0.982591 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.982591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184304Jy sigma=0.001354 ! Fit after self-cal, rms=0.184019Jy sigma=0.001350 ! Inverting map ! Your choice of large map pixels excluded 1.47% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* GG 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 0.96 LA 1.03 ! MA 1.00* MC 1.21 MK 1.00* NL 1.02 ! OV 0.96 PT 1.06 SC 0.99 TS 1.00* ! WF 0.89 WZ 1.00* ! ! A total of 120 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.00 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 0.83 MC 1.03 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 1.01 ! ! A total of 39 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* GG 1.00* HH 1.00* ! HN 1.05 KK 0.96 KP 0.95 LA 0.95 ! MA 1.00* MC 1.00* MK 0.95 NL 1.04 ! OV 1.00 PT 0.97 SC 1.02 TS 1.06 ! WF 0.89 WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* GG 1.00* HH 1.00* ! HN 1.01 KK 1.00* KP 0.93 LA 1.02 ! MA 1.00* MC 1.28 MK 1.00* NL 0.98 ! OV 0.98 PT 1.03 SC 0.96 TS 1.00* ! WF 0.86 WZ 1.00* ! ! A total of 120 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.04 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 0.84 MC 1.01 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 0.99 ! ! A total of 39 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00* GG 1.00* HH 1.00* ! HN 1.04 KK 0.93 KP 0.97 LA 0.93 ! MA 1.00* MC 1.00* MK 0.98 NL 1.00 ! OV 1.02 PT 0.95 SC 1.03 TS 1.00 ! WF 0.87 WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* GG 1.00* HH 1.00* ! HN 0.96 KK 1.00* KP 0.97 LA 1.03 ! MA 1.00* MC 1.12 MK 1.00* NL 1.02 ! OV 0.95 PT 1.07 SC 1.02 TS 1.00* ! WF 0.89 WZ 1.00* ! ! A total of 120 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.15 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 0.88 MC 0.96 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 1.01 ! ! A total of 39 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00* GG 1.00* HH 1.00* ! HN 1.04 KK 0.93 KP 0.96 LA 0.97 ! MA 1.00* MC 1.00* MK 0.99 NL 1.04 ! OV 1.00 PT 0.97 SC 1.00 TS 0.97 ! WF 1.01 WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* GG 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 0.97 LA 1.02 ! MA 1.00* MC 1.16 MK 1.00* NL 1.03 ! OV 0.98 PT 1.07 SC 1.02 TS 1.00* ! WF 0.89 WZ 1.00* ! ! A total of 120 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GG 1.00* HH 1.06 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MA 0.81 MC 1.04 MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* TS 1.00* ! WF 1.00* WZ 0.93 ! ! A total of 39 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00* GG 1.00* HH 1.00* ! HN 1.04 KK 0.95 KP 0.98 LA 0.96 ! MA 1.00* MC 1.00* MK 0.99 NL 1.08 ! OV 0.98 PT 0.98 SC 1.00 TS 0.88 ! WF 0.94 WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GG 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.184019Jy sigma=0.001350 ! Fit after self-cal, rms=0.161429Jy sigma=0.001303 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.681 mas, bmaj=1.928 mas, bpa=-5.483 degrees ! Estimated noise=827.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.4, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200811 Jy ! Component: 100 - total flux cleaned = 0.0320655 Jy ! Component: 150 - total flux cleaned = 0.0410079 Jy ! Component: 200 - total flux cleaned = 0.0483783 Jy ! Total flux subtracted in 200 components = 0.0483783 Jy ! Clean residual min=-0.009337 max=0.013719 Jy/beam ! Clean residual mean=0.001241 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 1.03097 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 1.03097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158743Jy sigma=0.001270 ! Fit after self-cal, rms=0.158541Jy sigma=0.001269 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158541Jy sigma=0.001269 ! Fit after self-cal, rms=0.157310Jy sigma=0.001233 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6816 mas, bmaj=1.926 mas, bpa=-5.464 degrees ! Estimated noise=827.961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637728 Jy ! Component: 100 - total flux cleaned = 0.0111735 Jy ! Component: 150 - total flux cleaned = 0.0143371 Jy ! Component: 200 - total flux cleaned = 0.0168966 Jy ! Total flux subtracted in 200 components = 0.0168966 Jy ! Clean residual min=-0.006208 max=0.009607 Jy/beam ! Clean residual mean=0.000711 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 1.04787 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 1.04787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156895Jy sigma=0.001228 ! Fit after self-cal, rms=0.156939Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914437 Jy ! Component: 100 - total flux cleaned = 0.0133006 Jy ! Component: 150 - total flux cleaned = 0.0155678 Jy ! Component: 200 - total flux cleaned = 0.0175489 Jy ! Total flux subtracted in 200 components = 0.0175489 Jy ! Clean residual min=-0.005820 max=0.009213 Jy/beam ! Clean residual mean=0.000572 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 1.06541 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 121 components and 1.06542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156335Jy sigma=0.001222 ! Fit after self-cal, rms=0.156314Jy sigma=0.001222 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (12, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00873671 Jy ! Component: 100 - total flux cleaned = 0.0131181 Jy ! Component: 150 - total flux cleaned = 0.0148928 Jy ! Component: 200 - total flux cleaned = 0.0164348 Jy ! Total flux subtracted in 200 components = 0.0164348 Jy ! Clean residual min=-0.005726 max=0.007582 Jy/beam ! Clean residual mean=0.000441 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 1.08185 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 1.08185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155762Jy sigma=0.001217 ! Fit after self-cal, rms=0.155745Jy sigma=0.001216 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (3.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468283 Jy ! Component: 100 - total flux cleaned = 0.00676633 Jy ! Component: 150 - total flux cleaned = 0.00824002 Jy ! Component: 200 - total flux cleaned = 0.00912243 Jy ! Total flux subtracted in 200 components = 0.00912243 Jy ! Clean residual min=-0.005224 max=0.007178 Jy/beam ! Clean residual mean=0.000368 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 1.09097 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 1.09097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155410Jy sigma=0.001213 ! Fit after self-cal, rms=0.155386Jy sigma=0.001212 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (5.6, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613069 Jy ! Component: 100 - total flux cleaned = 0.00918562 Jy ! Component: 150 - total flux cleaned = 0.010612 Jy ! Component: 200 - total flux cleaned = 0.0117019 Jy ! Total flux subtracted in 200 components = 0.0117019 Jy ! Clean residual min=-0.005018 max=0.005975 Jy/beam ! Clean residual mean=0.000300 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 1.10267 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 178 components and 1.10267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155053Jy sigma=0.001209 ! Fit after self-cal, rms=0.155034Jy sigma=0.001209 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155034Jy sigma=0.001209 ! Fit after self-cal, rms=0.155190Jy sigma=0.001206 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6816 mas, bmaj=1.927 mas, bpa=-5.437 degrees ! Estimated noise=827.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403185 Jy ! Component: 100 - total flux cleaned = 0.00735953 Jy ! Component: 150 - total flux cleaned = 0.00980682 Jy ! Component: 200 - total flux cleaned = 0.0120198 Jy ! Total flux subtracted in 200 components = 0.0120198 Jy ! Clean residual min=-0.004341 max=0.005242 Jy/beam ! Clean residual mean=0.000382 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 1.11469 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 197 components and 1.11469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154981Jy sigma=0.001204 ! Fit after self-cal, rms=0.155017Jy sigma=0.001204 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022657 Jy ! Component: 100 - total flux cleaned = 0.00418955 Jy ! Component: 150 - total flux cleaned = 0.00526207 Jy ! Component: 200 - total flux cleaned = 0.0061067 Jy ! Total flux subtracted in 200 components = 0.0061067 Jy ! Clean residual min=-0.004289 max=0.005080 Jy/beam ! Clean residual mean=0.000339 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 1.1208 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 205 components and 1.1208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154904Jy sigma=0.001203 ! Fit after self-cal, rms=0.154908Jy sigma=0.001203 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154908Jy sigma=0.001203 ! Fit after self-cal, rms=0.155035Jy sigma=0.001203 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=2.202 mas, bmaj=4.088 mas, bpa=-3.463 degrees ! Estimated noise=1089.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533918 Jy ! Component: 100 - total flux cleaned = 0.00920505 Jy ! Component: 150 - total flux cleaned = 0.0123844 Jy ! Component: 200 - total flux cleaned = 0.0144677 Jy ! Total flux subtracted in 200 components = 0.0144677 Jy ! Clean residual min=-0.004619 max=0.007049 Jy/beam ! Clean residual mean=0.000647 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 1.13527 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 220 components and 1.13527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155051Jy sigma=0.001203 ! Fit after self-cal, rms=0.155046Jy sigma=0.001203 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160984 Jy ! Component: 100 - total flux cleaned = 0.00275174 Jy ! Component: 150 - total flux cleaned = 0.00380268 Jy ! Component: 200 - total flux cleaned = 0.00461243 Jy ! Total flux subtracted in 200 components = 0.00461243 Jy ! Clean residual min=-0.004495 max=0.007267 Jy/beam ! Clean residual mean=0.000572 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 1.13988 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 225 components and 1.13988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155046Jy sigma=0.001203 ! Fit after self-cal, rms=0.155046Jy sigma=0.001203 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (-15.4, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694073 Jy ! Component: 100 - total flux cleaned = 0.00797824 Jy ! Component: 150 - total flux cleaned = 0.00944101 Jy ! Component: 200 - total flux cleaned = 0.0110918 Jy ! Total flux subtracted in 200 components = 0.0110918 Jy ! Clean residual min=-0.004071 max=0.005205 Jy/beam ! Clean residual mean=0.000400 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 1.15097 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 253 components and 1.15097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154902Jy sigma=0.001202 ! Fit after self-cal, rms=0.154868Jy sigma=0.001201 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6818 mas, bmaj=1.927 mas, bpa=-5.451 degrees ! Estimated noise=827.377 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6818 x 1.927 at -5.451 degrees (North through East) ! Clean map min=-0.0042547 max=0.44086 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.5763 mas, bmaj=1.684 mas, bpa=-4.118 degrees ! Estimated noise=1122.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340419 Jy ! Component: 100 - total flux cleaned = 0.494124 Jy ! Component: 150 - total flux cleaned = 0.58743 Jy ! Component: 200 - total flux cleaned = 0.65382 Jy ! Total flux subtracted in 200 components = 0.65382 Jy ! Clean residual min=-0.018140 max=0.039008 Jy/beam ! Clean residual mean=0.001232 rms=0.006342 Jy/beam ! Combined flux in latest and established models = 0.65382 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.65382 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6818 mas, bmaj=1.927 mas, bpa=-5.451 degrees ! Estimated noise=827.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785506 Jy ! Component: 100 - total flux cleaned = 0.136235 Jy ! Component: 150 - total flux cleaned = 0.180932 Jy ! Component: 200 - total flux cleaned = 0.215967 Jy ! Total flux subtracted in 200 components = 0.215967 Jy ! Clean residual min=-0.009598 max=0.021551 Jy/beam ! Clean residual mean=0.002201 rms=0.004623 Jy/beam ! Combined flux in latest and established models = 0.869787 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.869787 Jy ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028098 Jy ! Component: 100 - total flux cleaned = 0.0514619 Jy ! Component: 150 - total flux cleaned = 0.0713515 Jy ! Component: 200 - total flux cleaned = 0.0886508 Jy ! Total flux subtracted in 200 components = 0.0886508 Jy ! Clean residual min=-0.007292 max=0.013098 Jy/beam ! Clean residual mean=0.001561 rms=0.002976 Jy/beam ! Combined flux in latest and established models = 0.958438 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 84 components and 0.958438 Jy ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Added new window around map position (-8.8, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157506 Jy ! Component: 100 - total flux cleaned = 0.0295717 Jy ! Component: 150 - total flux cleaned = 0.0420231 Jy ! Component: 200 - total flux cleaned = 0.0532934 Jy ! Total flux subtracted in 200 components = 0.0532934 Jy ! Clean residual min=-0.005964 max=0.008785 Jy/beam ! Clean residual mean=0.001167 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 1.01173 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 112 components and 1.01173 Jy ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=2.202 mas, bmaj=4.088 mas, bpa=-3.463 degrees ! Estimated noise=1089.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206774 Jy ! Component: 100 - total flux cleaned = 0.0373509 Jy ! Component: 150 - total flux cleaned = 0.0511881 Jy ! Component: 200 - total flux cleaned = 0.0628341 Jy ! Total flux subtracted in 200 components = 0.0628341 Jy ! Clean residual min=-0.005780 max=0.008495 Jy/beam ! Clean residual mean=0.001732 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 1.07457 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00995159 Jy ! Component: 100 - total flux cleaned = 0.0186607 Jy ! Component: 150 - total flux cleaned = 0.0263469 Jy ! Component: 200 - total flux cleaned = 0.0331754 Jy ! Total flux subtracted in 200 components = 0.0331754 Jy ! Clean residual min=-0.004741 max=0.006778 Jy/beam ! Clean residual mean=0.001140 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 1.10774 Jy ! Adding 126 model components to the UV plane model. ! The established model now contains 223 components and 1.10774 Jy ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! Estimated beam: bmin=0.6818 mas, bmaj=1.927 mas, bpa=-5.451 degrees ! Estimated noise=827.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511436 Jy ! Component: 100 - total flux cleaned = 0.00904711 Jy ! Component: 150 - total flux cleaned = 0.0115827 Jy ! Component: 200 - total flux cleaned = 0.0144674 Jy ! Total flux subtracted in 200 components = 0.0144674 Jy ! Clean residual min=-0.004011 max=0.005999 Jy/beam ! Clean residual mean=0.000359 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 1.12221 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 264 components and 1.12221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155206Jy sigma=0.001204 ! Fit after self-cal, rms=0.155083Jy sigma=0.001202 wmodel J0241-0815_X_2001_10_29_pus_map.mod ! Writing 264 model components to file: J0241-0815_X_2001_10_29_pus_map.mod wobs J0241-0815_X_2001_10_29_pus_uvs.fits ! Writing UV FITS file: J0241-0815_X_2001_10_29_pus_uvs.fits wwins J0241-0815_X_2001_10_29_pus_map.win ! wwins: Wrote 13 windows to J0241-0815_X_2001_10_29_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245605 Jy ! Component: 100 - total flux cleaned = 0.00460211 Jy ! Component: 150 - total flux cleaned = 0.00659617 Jy ! Component: 200 - total flux cleaned = 0.00834665 Jy ! Component: 250 - total flux cleaned = 0.00980883 Jy ! Component: 300 - total flux cleaned = 0.0111524 Jy ! Component: 350 - total flux cleaned = 0.0120475 Jy ! Component: 400 - total flux cleaned = 0.0129216 Jy ! Component: 450 - total flux cleaned = 0.013514 Jy ! Component: 500 - total flux cleaned = 0.0143537 Jy ! Component: 550 - total flux cleaned = 0.0151782 Jy ! Component: 600 - total flux cleaned = 0.0158022 Jy ! Component: 650 - total flux cleaned = 0.0164777 Jy ! Component: 700 - total flux cleaned = 0.017201 Jy ! Component: 750 - total flux cleaned = 0.0177941 Jy ! Component: 800 - total flux cleaned = 0.0183781 Jy ! Component: 850 - total flux cleaned = 0.0190113 Jy ! Component: 900 - total flux cleaned = 0.0195213 Jy ! Component: 950 - total flux cleaned = 0.019969 Jy ! Component: 1000 - total flux cleaned = 0.0206306 Jy ! Component: 1050 - total flux cleaned = 0.0211199 Jy ! Component: 1100 - total flux cleaned = 0.0216566 Jy ! Component: 1150 - total flux cleaned = 0.0221345 Jy ! Component: 1200 - total flux cleaned = 0.0228153 Jy ! Component: 1250 - total flux cleaned = 0.0232807 Jy ! Component: 1300 - total flux cleaned = 0.0237414 Jy ! Component: 1350 - total flux cleaned = 0.0242979 Jy ! Component: 1400 - total flux cleaned = 0.024848 Jy ! Component: 1450 - total flux cleaned = 0.0253421 Jy ! Component: 1500 - total flux cleaned = 0.0258313 Jy ! Component: 1550 - total flux cleaned = 0.0264118 Jy ! Component: 1600 - total flux cleaned = 0.0269384 Jy ! Component: 1650 - total flux cleaned = 0.0273176 Jy ! Component: 1700 - total flux cleaned = 0.0279285 Jy ! Component: 1750 - total flux cleaned = 0.028347 Jy ! Component: 1800 - total flux cleaned = 0.0288539 Jy ! Component: 1850 - total flux cleaned = 0.0292194 Jy ! Component: 1900 - total flux cleaned = 0.029627 Jy ! Component: 1950 - total flux cleaned = 0.030031 Jy ! Component: 2000 - total flux cleaned = 0.030431 Jy ! Total flux subtracted in 2048 components = 0.0308281 Jy ! Clean residual min=-0.002788 max=0.002660 Jy/beam ! Clean residual mean=0.000185 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 1.15304 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 410 components and 1.15304 Jy ![Exited script file: muppet] wmap "J0241-0815_X_2001_10_29_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6818 x 1.927 at -5.451 degrees (North through East) ! Clean map min=-0.0028221 max=0.43838 Jy/beam ! Writing clean map to FITS file: J0241-0815_X_2001_10_29_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.438377 invert ! Inverting map ! Your choice of large map pixels excluded 1.6% of the data. ! The x-axis pixel size should ideally be below 0.1922 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000827849 device "J0241-0815_X_2001_10_29_pus\_map.eps/VPS" ! Attempting to open device: 'J0241-0815_X_2001_10_29_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.566532 0.566532 1.13306 2.26613 4.53226 9.06451 18.129 36.258 72.5161 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.438 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6818 x 1.927 at -5.451 degrees (North through East) ! Clean map min=-0.0028221 max=0.43838 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0241-0815_X_2001_10_29_pus\_map.gif/vgif" ! Attempting to open device: 'J0241-0815_X_2001_10_29_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0241-0815_X_2001_10_29_pus_uvs.log closed on Mon Feb 25 16:38:01 2008