! Started logfile: 2134+00_X.log on Mon Dec 11 17:06:57 2006 observe 2134+00_X.edt ! Reading UV FITS file: 2134+00_X.edt ! AN table 1: 49 integrations on 153 of 153 possible baselines. ! AN table 2: 62 integrations on 153 of 153 possible baselines. ! AN table 3: 19 integrations on 153 of 153 possible baselines. ! AN table 4: 16 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.112096 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 2134+00 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1308 lines of history. ! ! Reading 10016 visibilities. ![@gonzo5-0.1 2134+00_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 827 telescope corrections were flagged in sub-array 1. ! A total of 762 telescope corrections were flagged in sub-array 2. ! A total of 257 telescope corrections were flagged in sub-array 3. ! A total of 273 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 827 telescope corrections were flagged in sub-array 1. ! A total of 763 telescope corrections were flagged in sub-array 2. ! A total of 255 telescope corrections were flagged in sub-array 3. ! A total of 273 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 827 telescope corrections were flagged in sub-array 1. ! A total of 765 telescope corrections were flagged in sub-array 2. ! A total of 261 telescope corrections were flagged in sub-array 3. ! A total of 276 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 827 telescope corrections were flagged in sub-array 1. ! A total of 766 telescope corrections were flagged in sub-array 2. ! A total of 264 telescope corrections were flagged in sub-array 3. ! A total of 285 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=4.584179Jy sigma=0.078521 ! Fit after self-cal, rms=4.590936Jy sigma=0.078661 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5713 mas, bmaj=1.289 mas, bpa=-4.963 degrees ! Estimated noise=1309.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.86327 Jy ! Total flux subtracted in 50 components = 2.86327 Jy ! Clean residual min=-0.342288 max=1.171430 Jy/beam ! Clean residual mean=0.004448 rms=0.126815 Jy/beam ! Combined flux in latest and established models = 2.86327 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 2.86327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.213994Jy sigma=0.055463 ! Fit after self-cal, rms=3.213750Jy sigma=0.055460 ! Inverting map ! Added new window around map position (-0.6, 0.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3722 Jy ! Total flux subtracted in 50 components = 1.3722 Jy ! Clean residual min=-0.266477 max=0.793655 Jy/beam ! Clean residual mean=0.003225 rms=0.092355 Jy/beam ! Combined flux in latest and established models = 4.23547 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 4.23547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.327086Jy sigma=0.040081 ! Fit after self-cal, rms=2.325519Jy sigma=0.040058 ! Inverting map ! Added new window around map position (1, 0.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.930131 Jy ! Total flux subtracted in 50 components = 0.930131 Jy ! Clean residual min=-0.213278 max=0.637136 Jy/beam ! Clean residual mean=0.002378 rms=0.071263 Jy/beam ! Combined flux in latest and established models = 5.1656 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 65 components and 5.1656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.775212Jy sigma=0.030469 ! Fit after self-cal, rms=1.772874Jy sigma=0.030435 ! Inverting map ! Added new window around map position (-1.6, -0.5). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.697599 Jy ! Total flux subtracted in 50 components = 0.697599 Jy ! Clean residual min=-0.178687 max=0.457506 Jy/beam ! Clean residual mean=0.001739 rms=0.056057 Jy/beam ! Combined flux in latest and established models = 5.8632 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 5.8632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.388343Jy sigma=0.023749 ! Fit after self-cal, rms=1.387172Jy sigma=0.023738 ! Inverting map ! Added new window around map position (1.9, 0.5). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.536949 Jy ! Total flux subtracted in 50 components = 0.536949 Jy ! Clean residual min=-0.141193 max=0.306872 Jy/beam ! Clean residual mean=0.001232 rms=0.044941 Jy/beam ! Combined flux in latest and established models = 6.40015 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 6.40015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.107690Jy sigma=0.018880 ! Fit after self-cal, rms=1.107343Jy sigma=0.018878 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407217 Jy ! Total flux subtracted in 50 components = 0.407217 Jy ! Clean residual min=-0.115421 max=0.236944 Jy/beam ! Clean residual mean=0.000851 rms=0.036961 Jy/beam ! Combined flux in latest and established models = 6.80737 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 110 components and 6.80737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.902110Jy sigma=0.015270 ! Fit after self-cal, rms=0.901906Jy sigma=0.015268 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316623 Jy ! Total flux subtracted in 50 components = 0.316623 Jy ! Clean residual min=-0.111030 max=0.191998 Jy/beam ! Clean residual mean=0.000554 rms=0.031130 Jy/beam ! Combined flux in latest and established models = 7.12399 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 7.12399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.751257Jy sigma=0.012587 ! Fit after self-cal, rms=0.751095Jy sigma=0.012586 ! Inverting map ! Added new window around map position (0.6, 1.5). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250321 Jy ! Total flux subtracted in 50 components = 0.250321 Jy ! Clean residual min=-0.111316 max=0.147266 Jy/beam ! Clean residual mean=0.000317 rms=0.026787 Jy/beam ! Combined flux in latest and established models = 7.37431 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 7.37431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638679Jy sigma=0.010554 ! Fit after self-cal, rms=0.638261Jy sigma=0.010549 ! Inverting map ! Added new window around map position (0, 1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198848 Jy ! Total flux subtracted in 50 components = 0.198848 Jy ! Clean residual min=-0.110400 max=0.120570 Jy/beam ! Clean residual mean=0.000130 rms=0.023619 Jy/beam ! Combined flux in latest and established models = 7.57316 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 143 components and 7.57316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.556317Jy sigma=0.009045 ! Fit after self-cal, rms=0.556014Jy sigma=0.009042 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159027 Jy ! Total flux subtracted in 50 components = 0.159027 Jy ! Clean residual min=-0.108415 max=0.101847 Jy/beam ! Clean residual mean=-0.000020 rms=0.021336 Jy/beam ! Combined flux in latest and established models = 7.73219 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 150 components and 7.73219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.496472Jy sigma=0.007930 ! Fit after self-cal, rms=0.496223Jy sigma=0.007928 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9261 mas, bmaj=1.891 mas, bpa=-3.743 degrees ! Estimated noise=595.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246187 Jy ! Component: 100 - total flux cleaned = 0.386125 Jy ! Total flux subtracted in 100 components = 0.386125 Jy ! Clean residual min=-0.077192 max=0.098512 Jy/beam ! Clean residual mean=-0.000778 rms=0.022533 Jy/beam ! Combined flux in latest and established models = 8.11831 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 191 components and 8.11831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388920Jy sigma=0.005819 ! Fit after self-cal, rms=0.388473Jy sigma=0.005812 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 GC 1.07 HH 1.00* HN 0.96 ! LA 0.98 MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* OV 0.98 PT 0.99 SC 1.00* ! TS 1.00* WF 0.99 BR 0.97 KK 1.15 ! KP 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 GC 1.01 HH 1.00* HN 1.00 ! LA 0.98 MC 1.00* MK 0.95 NY 1.00* ! ON 1.00* OV 0.96 PT 0.98 SC 1.00* ! TS 1.05 WF 1.01 BR 0.98 KK 1.02 ! KP 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 GC 1.00* HH 1.30 HN 1.20 ! LA 1.02 MC 1.08 MK 1.00* NY 1.13 ! ON 1.03 OV 1.01 PT 1.00 SC 1.00* ! TS 1.00* WF 0.89 BR 0.93 KK 1.00* ! KP 1.00 WZ 0.93 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* GC 0.00* HH 0.00* HN 0.00* ! LA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* BR 0.00* KK 0.00* ! KP 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 GC 1.09 HH 1.00* HN 0.94 ! LA 0.98 MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* OV 0.98 PT 1.03 SC 1.00* ! TS 1.00* WF 1.00 BR 0.98 KK 1.13 ! KP 0.94 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 GC 1.04 HH 1.00* HN 1.01 ! LA 0.98 MC 1.00* MK 0.95 NY 1.00* ! ON 1.00* OV 0.96 PT 1.02 SC 1.00* ! TS 1.11 WF 1.02 BR 0.99 KK 1.03 ! KP 0.94 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 GC 1.00* HH 1.40 HN 1.18 ! LA 1.01 MC 1.09 MK 1.00* NY 1.12 ! ON 1.03 OV 1.02 PT 1.03 SC 1.00* ! TS 1.00* WF 0.96 BR 0.93 KK 1.00* ! KP 0.96 WZ 0.92 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* GC 0.00* HH 0.00* HN 0.00* ! LA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* BR 0.00* KK 0.00* ! KP 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 GC 1.14 HH 1.00* HN 0.93 ! LA 1.00 MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* OV 1.01 PT 1.07 SC 1.00* ! TS 1.00* WF 1.10 BR 1.01 KK 1.11 ! KP 0.94 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 GC 1.07 HH 1.00* HN 1.13 ! LA 1.01 MC 1.00* MK 0.99 NY 1.00* ! ON 1.00* OV 1.00 PT 1.06 SC 1.00* ! TS 1.37 WF 1.30 BR 1.05 KK 1.05 ! KP 0.94 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 GC 1.00* HH 1.14 HN 1.44 ! LA 1.04 MC 1.10 MK 1.00* NY 1.02 ! ON 1.07 OV 1.05 PT 1.07 SC 1.00* ! TS 1.00* WF 1.47 BR 0.98 KK 1.00* ! KP 0.95 WZ 0.95 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* GC 0.00* HH 0.00* HN 0.00* ! LA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* BR 0.00* KK 0.00* ! KP 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 GC 1.19 HH 1.00* HN 0.93 ! LA 0.98 MC 1.00* MK 1.00 NY 1.00* ! ON 1.00* OV 1.00 PT 1.06 SC 1.00* ! TS 1.00* WF 1.09 BR 0.99 KK 1.10 ! KP 0.96 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 GC 1.14 HH 1.00* HN 1.10 ! LA 0.99 MC 1.00* MK 1.03 NY 1.00* ! ON 1.00* OV 0.98 PT 1.05 SC 1.00* ! TS 1.00* WF 1.27 BR 1.02 KK 1.05 ! KP 0.96 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 GC 1.00* HH 1.00* HN 1.35 ! LA 1.01 MC 1.18 MK 1.00* NY 1.04 ! ON 1.05 OV 1.03 PT 1.05 SC 1.00* ! TS 1.00* WF 1.44 BR 0.95 KK 1.00* ! KP 0.98 WZ 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* GC 0.00* HH 0.00* HN 0.00* ! LA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* BR 0.00* KK 0.00* ! KP 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.388473Jy sigma=0.005812 ! Fit after self-cal, rms=0.241861Jy sigma=0.003054 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9469 mas, bmaj=1.978 mas, bpa=-4.685 degrees ! Estimated noise=600.022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033578 Jy ! Component: 100 - total flux cleaned = 0.0362581 Jy ! Total flux subtracted in 100 components = 0.0362581 Jy ! Clean residual min=-0.060060 max=0.033306 Jy/beam ! Clean residual mean=-0.000028 rms=0.008249 Jy/beam ! Combined flux in latest and established models = 8.15457 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 200 components and 8.15457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229873Jy sigma=0.002881 ! Fit after self-cal, rms=0.229257Jy sigma=0.002875 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00338556 Jy ! Component: 100 - total flux cleaned = -0.00426706 Jy ! Total flux subtracted in 100 components = -0.00426706 Jy ! Clean residual min=-0.059824 max=0.032944 Jy/beam ! Clean residual mean=-0.000025 rms=0.007969 Jy/beam ! Combined flux in latest and established models = 8.1503 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 205 components and 8.1503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224861Jy sigma=0.002817 ! Fit after self-cal, rms=0.218956Jy sigma=0.002669 ! Inverting map and beam ! Estimated beam: bmin=0.9483 mas, bmaj=1.967 mas, bpa=-4.221 degrees ! Estimated noise=600.386 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117122 Jy ! Component: 100 - total flux cleaned = 0.0130685 Jy ! Total flux subtracted in 100 components = 0.0130685 Jy ! Clean residual min=-0.052512 max=0.030456 Jy/beam ! Clean residual mean=0.000182 rms=0.007550 Jy/beam ! Combined flux in latest and established models = 8.16337 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 212 components and 8.16337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215637Jy sigma=0.002624 ! Fit after self-cal, rms=0.215475Jy sigma=0.002622 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 2134+00_X ! Writing UV FITS file: 2134+00_X.uvf ! Writing 212 model components to file: 2134+00_X.mod ! wwins: Wrote 7 windows to 2134+00_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9483 x 1.967 at -4.221 degrees (North through East) ! Clean map min=-0.042015 max=3.6972 Jy/beam ! Writing clean map to FITS file: 2134+00_X.fits ! Writing difmap environment to: 2134+00_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 2134+00_X] device 2134+00_Xuv.ps/vps,1,2 ! Attempting to open device: '2134+00_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 2134+00_Xim.ps/vps ! Attempting to open device: '2134+00_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.9483 mas, bmaj=1.967 mas, bpa=-4.221 degrees ! Estimated noise=600.386 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9483 x 1.967 at -4.221 degrees (North through East) ! Clean map min=-0.042015 max=3.6972 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.1] quit ! Quitting program ! Log file 2134+00_X.log closed on Mon Dec 11 17:07:29 2006