! Started logfile: 1642+690_X.log on Sat Dec  2 15:15:13 2006
observe 1642+690_X.edt
! Reading UV FITS file: 1642+690_X.edt
! AN table 1: 124 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.286369 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 1642+690
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1304 lines of history.
! 
! Reading 21732 visibilities.
![@gonzo6-0.1 1642+690_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1282 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1284 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1284 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.362513Jy  sigma=0.004918
! Fit after  self-cal, rms=0.361726Jy  sigma=0.004917
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.4519 mas, bmaj=0.7751 mas, bpa=63.52 degrees
! Estimated noise=786.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.496482 Jy
! Total flux subtracted in 50 components = 0.496482 Jy
! Clean residual min=-0.028412 max=0.138531 Jy/beam
! Clean residual mean=-0.000415 rms=0.006793 Jy/beam
! Combined flux in latest and established models = 0.496482 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.496482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.240668Jy  sigma=0.003483
! Fit after  self-cal, rms=0.240668Jy  sigma=0.003483
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114431 Jy
! Total flux subtracted in 50 components = 0.114431 Jy
! Clean residual min=-0.018158 max=0.063047 Jy/beam
! Clean residual mean=-0.000283 rms=0.004473 Jy/beam
! Combined flux in latest and established models = 0.610913 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.610913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173554Jy  sigma=0.002455
! Fit after  self-cal, rms=0.173417Jy  sigma=0.002455
! Inverting map 
! Added new window around map position (0, -1.3).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.061447 Jy
! Total flux subtracted in 50 components = 0.061447 Jy
! Clean residual min=-0.013938 max=0.030641 Jy/beam
! Clean residual mean=-0.000212 rms=0.003595 Jy/beam
! Combined flux in latest and established models = 0.67236 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 13 components and 0.67236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148581Jy  sigma=0.002036
! Fit after  self-cal, rms=0.147630Jy  sigma=0.002029
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386252 Jy
! Total flux subtracted in 50 components = 0.0386252 Jy
! Clean residual min=-0.011884 max=0.020175 Jy/beam
! Clean residual mean=-0.000167 rms=0.003123 Jy/beam
! Combined flux in latest and established models = 0.710985 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.710985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135509Jy  sigma=0.001813
! Fit after  self-cal, rms=0.135176Jy  sigma=0.001811
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268586 Jy
! Total flux subtracted in 50 components = 0.0268586 Jy
! Clean residual min=-0.011518 max=0.018869 Jy/beam
! Clean residual mean=-0.000136 rms=0.002884 Jy/beam
! Combined flux in latest and established models = 0.737843 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.737843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128544Jy  sigma=0.001686
! Fit after  self-cal, rms=0.128333Jy  sigma=0.001686
! Inverting map 
! Added new window around map position (-1.1, -3.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218608 Jy
! Total flux subtracted in 50 components = 0.0218608 Jy
! Clean residual min=-0.010844 max=0.012982 Jy/beam
! Clean residual mean=-0.000113 rms=0.002713 Jy/beam
! Combined flux in latest and established models = 0.759704 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.759704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123943Jy  sigma=0.001602
! Fit after  self-cal, rms=0.123785Jy  sigma=0.001602
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5924 mas, bmaj=0.9329 mas, bpa=55.37 degrees
! Estimated noise=399.359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326089 Jy
! Component: 100  -  total flux cleaned = 0.0540656 Jy
! Total flux subtracted in 100 components = 0.0540656 Jy
! Clean residual min=-0.009708 max=0.014671 Jy/beam
! Clean residual mean=-0.000011 rms=0.002943 Jy/beam
! Combined flux in latest and established models = 0.81377 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 41 components and 0.81377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116179Jy  sigma=0.001454
! Fit after  self-cal, rms=0.115805Jy  sigma=0.001450
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     GC        0.99     HH        1.00*    HN        1.02     
!   LA        0.97     MC        1.13     MK        1.00     NY        0.99     
!   ON        0.98     OV        0.98     PT        0.98     SC        1.00*    
!   TS        1.00*    WF        1.00     BR        0.99     KK        1.00*    
!   KP        1.02     WZ        0.91     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     GC        1.00     HH        1.00*    HN        1.02     
!   LA        0.97     MC        1.13     MK        0.99     NY        1.01     
!   ON        0.97     OV        0.98     PT        1.01     SC        1.00*    
!   TS        1.00*    WF        1.00     BR        0.99     KK        1.00*    
!   KP        0.97     WZ        0.90     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     GC        1.01     HH        1.00*    HN        1.01     
!   LA        0.97     MC        1.19     MK        0.99     NY        0.99     
!   ON        0.96     OV        1.01     PT        1.02     SC        1.00*    
!   TS        1.00*    WF        1.10     BR        1.01     KK        1.00*    
!   KP        0.94     WZ        0.89     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     GC        1.04     HH        1.00*    HN        1.01     
!   LA        0.95     MC        1.24     MK        1.02     NY        1.03     
!   ON        0.96     OV        0.98     PT        1.01     SC        1.00*    
!   TS        1.00*    WF        1.09     BR        0.99     KK        1.00*    
!   KP        0.96     WZ        0.90     
! 
! 
! Fit before self-cal, rms=0.115805Jy  sigma=0.001450
! Fit after  self-cal, rms=0.103567Jy  sigma=0.001278
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5928 mas, bmaj=0.9376 mas, bpa=54.78 degrees
! Estimated noise=392.584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -9.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015434 Jy
! Component: 100  -  total flux cleaned = 0.0267617 Jy
! Total flux subtracted in 100 components = 0.0267617 Jy
! Clean residual min=-0.005291 max=0.009019 Jy/beam
! Clean residual mean=-0.000046 rms=0.001785 Jy/beam
! Combined flux in latest and established models = 0.840532 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 78 components and 0.840532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101727Jy  sigma=0.001229
! Fit after  self-cal, rms=0.101595Jy  sigma=0.001228
! Inverting map 
! Added new window around map position (-1.2, -4.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010905 Jy
! Component: 100  -  total flux cleaned = 0.019633 Jy
! Total flux subtracted in 100 components = 0.019633 Jy
! Clean residual min=-0.004988 max=0.006832 Jy/beam
! Clean residual mean=-0.000040 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.860165 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 116 components and 0.860165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100577Jy  sigma=0.001201
! Fit after  self-cal, rms=0.100499Jy  sigma=0.001201
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.3, -7.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00824975 Jy
! Component: 100  -  total flux cleaned = 0.0151429 Jy
! Total flux subtracted in 100 components = 0.0151429 Jy
! Clean residual min=-0.004702 max=0.005737 Jy/beam
! Clean residual mean=-0.000034 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.875308 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 142 components and 0.875308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099873Jy  sigma=0.001185
! Fit after  self-cal, rms=0.098292Jy  sigma=0.001162
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=0.9371 mas, bpa=55.13 degrees
! Estimated noise=392.378 mJy/beam.
! Added new window around map position (-2.7, -7.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668892 Jy
! Component: 100  -  total flux cleaned = 0.0121423 Jy
! Total flux subtracted in 100 components = 0.0121423 Jy
! Clean residual min=-0.003594 max=0.004401 Jy/beam
! Clean residual mean=-0.000020 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.88745 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 183 components and 0.88745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097884Jy  sigma=0.001152
! Fit after  self-cal, rms=0.097716Jy  sigma=0.001150
! Inverting map and beam 
! Estimated beam: bmin=0.594 mas, bmaj=0.9371 mas, bpa=55.15 degrees
! Estimated noise=392.251 mJy/beam.
! Added new window around map position (-0.8, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536071 Jy
! Component: 100  -  total flux cleaned = 0.00975216 Jy
! Total flux subtracted in 100 components = 0.00975216 Jy
! Clean residual min=-0.003223 max=0.003653 Jy/beam
! Clean residual mean=-0.000017 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.897202 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 212 components and 0.897202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097435Jy  sigma=0.001144
! Fit after  self-cal, rms=0.097364Jy  sigma=0.001143
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=0.937 mas, bpa=55.16 degrees
! Estimated noise=392.367 mJy/beam.
! Added new window around map position (-3.9, -9.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450934 Jy
! Component: 100  -  total flux cleaned = 0.00821602 Jy
! Total flux subtracted in 100 components = 0.00821602 Jy
! Clean residual min=-0.002906 max=0.003111 Jy/beam
! Clean residual mean=-0.000017 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.905418 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 240 components and 0.905418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097167Jy  sigma=0.001139
! Fit after  self-cal, rms=0.097111Jy  sigma=0.001138
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=0.9369 mas, bpa=55.16 degrees
! Estimated noise=392.49 mJy/beam.
! Added new window around map position (-1.1, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377111 Jy
! Component: 100  -  total flux cleaned = 0.00694018 Jy
! Total flux subtracted in 100 components = 0.00694018 Jy
! Clean residual min=-0.002691 max=0.002900 Jy/beam
! Clean residual mean=-0.000015 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.912359 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 265 components and 0.912358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096953Jy  sigma=0.001135
! Fit after  self-cal, rms=0.096875Jy  sigma=0.001135
! Inverting map and beam 
! Estimated beam: bmin=0.5936 mas, bmaj=0.9367 mas, bpa=55.16 degrees
! Estimated noise=392.608 mJy/beam.
! Added new window around map position (18.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342783 Jy
! Component: 100  -  total flux cleaned = 0.00624273 Jy
! Total flux subtracted in 100 components = 0.00624273 Jy
! Clean residual min=-0.002461 max=0.002698 Jy/beam
! Clean residual mean=-0.000014 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.918601 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 283 components and 0.918601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096737Jy  sigma=0.001133
! Fit after  self-cal, rms=0.096678Jy  sigma=0.001132
! Inverting map and beam 
! Estimated beam: bmin=0.5934 mas, bmaj=0.9366 mas, bpa=55.15 degrees
! Estimated noise=392.738 mJy/beam.
! Added new window around map position (-10.4, 25).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300176 Jy
! Component: 100  -  total flux cleaned = 0.00548367 Jy
! Total flux subtracted in 100 components = 0.00548367 Jy
! Clean residual min=-0.002288 max=0.002352 Jy/beam
! Clean residual mean=-0.000008 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.924085 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 303 components and 0.924085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096574Jy  sigma=0.001131
! Fit after  self-cal, rms=0.096527Jy  sigma=0.001130
! Inverting map and beam 
! Estimated beam: bmin=0.5933 mas, bmaj=0.9365 mas, bpa=55.13 degrees
! Estimated noise=392.863 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247817 Jy
! Component: 100  -  total flux cleaned = 0.0046432 Jy
! Total flux subtracted in 100 components = 0.0046432 Jy
! Clean residual min=-0.002170 max=0.002316 Jy/beam
! Clean residual mean=-0.000007 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.928728 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 318 components and 0.928728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096454Jy  sigma=0.001129
! Fit after  self-cal, rms=0.096431Jy  sigma=0.001129
! Inverting map 
! Added new window around map position (1.7, -12.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00236772 Jy
! Component: 100  -  total flux cleaned = 0.00430457 Jy
! Total flux subtracted in 100 components = 0.00430457 Jy
! Clean residual min=-0.002160 max=0.002216 Jy/beam
! Clean residual mean=-0.000009 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.933033 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 328 components and 0.933033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096364Jy  sigma=0.001128
! Fit after  self-cal, rms=0.096360Jy  sigma=0.001128
! Inverting map 
! Added new window around map position (6.3, 25.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215035 Jy
! Component: 100  -  total flux cleaned = 0.00385457 Jy
! Total flux subtracted in 100 components = 0.00385457 Jy
! Clean residual min=-0.002179 max=0.002019 Jy/beam
! Clean residual mean=-0.000007 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.936887 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 338 components and 0.936887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096303Jy  sigma=0.001127
! Fit after  self-cal, rms=0.096301Jy  sigma=0.001127
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 1642+690_X
! Writing UV FITS file: 1642+690_X.uvf
! Writing 338 model components to file: 1642+690_X.mod
! wwins: Wrote 14 windows to 1642+690_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5933 x 0.9365 at 55.13 degrees (North through East)
! Clean map  min=-0.0020241  max=0.65561 Jy/beam
! Writing clean map to FITS file: 1642+690_X.fits
! Writing difmap environment to: 1642+690_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 1642+690_X]
device 1642+690_Xuv.ps/vps,1,2
! Attempting to open device: '1642+690_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 1642+690_Xim.ps/vps
! Attempting to open device: '1642+690_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.5933 mas, bmaj=0.9365 mas, bpa=55.13 degrees
! Estimated noise=392.863 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5933 x 0.9365 at 55.13 degrees (North through East)
! Clean map  min=-0.0020241  max=0.65561 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 1642+690_X.log closed on Sat Dec  2 15:15:52 2006