! Started logfile: J1517-2422_X_2001_04_09_pus_uvs.log on Tue Oct 2 11:20:11 2007 obs J1517-2422_X_2001_04_09_pus_uva.fits ! Reading UV FITS file: J1517-2422_X_2001_04_09_pus_uva.fits ! AN table 1: 14 integrations on 190 of 190 possible baselines. ! AN table 2: 6 integrations on 190 of 190 possible baselines. ! AN table 3: 56 integrations on 190 of 190 possible baselines. ! AN table 4: 52 integrations on 190 of 190 possible baselines. ! AN table 5: 12 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.0593985 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1517-2422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1926 lines of history. ! ! Reading 6320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1517-2422_X_2001_04_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 250 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 1002 telescope corrections were flagged in sub-array 3. ! A total of 734 telescope corrections were flagged in sub-array 4. ! A total of 151 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 250 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 1002 telescope corrections were flagged in sub-array 3. ! A total of 734 telescope corrections were flagged in sub-array 4. ! A total of 151 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 250 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 1002 telescope corrections were flagged in sub-array 3. ! A total of 734 telescope corrections were flagged in sub-array 4. ! A total of 151 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 250 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 1002 telescope corrections were flagged in sub-array 3. ! A total of 734 telescope corrections were flagged in sub-array 4. ! A total of 151 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.858805Jy sigma=0.008513 ! Fit after self-cal, rms=0.416219Jy sigma=0.003677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.6412 mas, bmaj=1.813 mas, bpa=4.769 degrees ! Estimated noise=1287.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.770445 Jy ! Component: 100 - total flux cleaned = 1.02783 Jy ! Total flux subtracted in 100 components = 1.02783 Jy ! Clean residual min=-0.045610 max=0.139321 Jy/beam ! Clean residual mean=0.000434 rms=0.016796 Jy/beam ! Combined flux in latest and established models = 1.02783 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.02783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314585Jy sigma=0.002923 ! Fit after self-cal, rms=0.313229Jy sigma=0.002915 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132582 Jy ! Component: 100 - total flux cleaned = 0.202808 Jy ! Total flux subtracted in 100 components = 0.202808 Jy ! Clean residual min=-0.041696 max=0.084107 Jy/beam ! Clean residual mean=-0.000154 rms=0.011632 Jy/beam ! Combined flux in latest and established models = 1.23064 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 1.23064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271868Jy sigma=0.002403 ! Fit after self-cal, rms=0.267267Jy sigma=0.002370 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7246 mas, bmaj=2.037 mas, bpa=4.956 degrees ! Estimated noise=981.231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501425 Jy ! Component: 100 - total flux cleaned = 0.0555641 Jy ! Component: 150 - total flux cleaned = 0.0577375 Jy ! Component: 200 - total flux cleaned = 0.0601699 Jy ! Total flux subtracted in 200 components = 0.0601699 Jy ! Clean residual min=-0.053324 max=0.063130 Jy/beam ! Clean residual mean=-0.003733 rms=0.014493 Jy/beam ! Combined flux in latest and established models = 1.29081 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 48 components and 1.29081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259163Jy sigma=0.002256 ! Fit after self-cal, rms=0.256851Jy sigma=0.002241 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HH 1.15 HN 1.00* KK 1.00* KP 1.00* ! LA 1.00* MA 1.03 MC 0.99 MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* TS 1.00* WF 1.00* WZ 0.77 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 FD 1.15 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00* KK 1.00 KP 1.08 ! LA 1.03 MA 1.00* MC 1.00* MK 0.97 ! NL 0.98 NY 1.00* OV 1.03 PT 1.00 ! SC 0.98 TS 0.92 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.00 GC 1.00* GG 1.00* ! HH 1.00* HN 0.98 KK 1.00* KP 0.93 ! LA 0.90 MA 1.00* MC 1.00* MK 1.00* ! NL 0.95 NY 1.00* OV 1.02 PT 0.89 ! SC 0.97 TS 1.00* WF 0.96 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HH 1.15 HN 1.00* KK 1.00* KP 1.00* ! LA 1.00* MA 5.54 MC 0.82 MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* TS 1.00* WF 1.00* WZ 0.84 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.12 FD 1.13 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00* KK 1.02 KP 1.07 ! LA 1.03 MA 1.00* MC 1.00* MK 1.01 ! NL 0.94 NY 1.00* OV 1.02 PT 1.01 ! SC 0.98 TS 0.91 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.07 FD 1.01 GC 1.00* GG 1.00* ! HH 1.00* HN 0.98 KK 1.00* KP 0.92 ! LA 0.92 MA 1.00* MC 1.00* MK 1.00* ! NL 0.90 NY 1.00* OV 1.03 PT 0.89 ! SC 1.00 TS 1.00* WF 0.94 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HH 1.43 HN 1.00* KK 1.00* KP 1.00* ! LA 1.00* MA 1.00 MC 1.03 MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* TS 1.00* WF 1.00* WZ 0.81 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 FD 1.15 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00* KK 1.01 KP 0.97 ! LA 1.04 MA 1.00* MC 1.00* MK 0.99 ! NL 0.96 NY 1.00* OV 0.99 PT 0.95 ! SC 1.07 TS 0.94 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.02 GC 1.00* GG 1.00* ! HH 1.00* HN 1.02 KK 1.00* KP 0.82 ! LA 0.93 MA 1.00* MC 1.00* MK 1.00* ! NL 0.92 NY 1.00* OV 1.03 PT 0.85 ! SC 0.97 TS 1.00* WF 0.97 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.00* GG 1.00* ! HH 1.09 HN 1.00* KK 1.00* KP 1.00* ! LA 1.00* MA 1.04 MC 0.93 MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* TS 1.00* WF 1.00* WZ 0.86 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.13 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00* KK 1.02 KP 1.20 ! LA 1.01 MA 1.00* MC 1.00* MK 1.03 ! NL 0.96 NY 1.00* OV 0.97 PT 1.01 ! SC 1.06 TS 0.96 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 1.02 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00 KK 1.00* KP 1.04 ! LA 0.91 MA 1.00* MC 1.00* MK 1.00* ! NL 0.94 NY 1.00* OV 0.99 PT 0.90 ! SC 0.99 TS 1.00* WF 1.01 WZ 1.00* ! ! ! Fit before self-cal, rms=0.256851Jy sigma=0.002241 ! Fit after self-cal, rms=0.247870Jy sigma=0.001908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7239 mas, bmaj=2.238 mas, bpa=3.632 degrees ! Estimated noise=1010.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289856 Jy ! Component: 100 - total flux cleaned = 0.00174213 Jy ! Component: 150 - total flux cleaned = 0.00149211 Jy ! Component: 200 - total flux cleaned = 0.00169586 Jy ! Total flux subtracted in 200 components = 0.00169586 Jy ! Clean residual min=-0.039945 max=0.048057 Jy/beam ! Clean residual mean=-0.002100 rms=0.010303 Jy/beam ! Combined flux in latest and established models = 1.2925 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 1.2925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247299Jy sigma=0.001902 ! Fit after self-cal, rms=0.248102Jy sigma=0.001901 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248102Jy sigma=0.001901 ! Fit after self-cal, rms=0.227396Jy sigma=0.001574 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7247 mas, bmaj=2.221 mas, bpa=3.564 degrees ! Estimated noise=1017.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241104 Jy ! Component: 100 - total flux cleaned = 0.00268301 Jy ! Component: 150 - total flux cleaned = 0.00288827 Jy ! Component: 200 - total flux cleaned = 0.00287896 Jy ! Total flux subtracted in 200 components = 0.00287896 Jy ! Clean residual min=-0.014013 max=0.046181 Jy/beam ! Clean residual mean=0.002358 rms=0.006819 Jy/beam ! Combined flux in latest and established models = 1.29538 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 1.29538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226806Jy sigma=0.001568 ! Fit after self-cal, rms=0.227139Jy sigma=0.001568 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481601 Jy ! Component: 100 - total flux cleaned = 0.075074 Jy ! Component: 150 - total flux cleaned = 0.0902932 Jy ! Component: 200 - total flux cleaned = 0.0955898 Jy ! Total flux subtracted in 200 components = 0.0955898 Jy ! Clean residual min=-0.014345 max=0.020120 Jy/beam ! Clean residual mean=0.000551 rms=0.004245 Jy/beam ! Combined flux in latest and established models = 1.39097 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 104 components and 1.39097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217583Jy sigma=0.001407 ! Fit after self-cal, rms=0.216176Jy sigma=0.001388 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216176Jy sigma=0.001388 ! Fit after self-cal, rms=0.212767Jy sigma=0.001357 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7247 mas, bmaj=2.219 mas, bpa=3.582 degrees ! Estimated noise=1010.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223664 Jy ! Component: 100 - total flux cleaned = 0.0359255 Jy ! Component: 150 - total flux cleaned = 0.0419624 Jy ! Component: 200 - total flux cleaned = 0.0462541 Jy ! Total flux subtracted in 200 components = 0.0462541 Jy ! Clean residual min=-0.010782 max=0.015280 Jy/beam ! Clean residual mean=0.000668 rms=0.003139 Jy/beam ! Combined flux in latest and established models = 1.43722 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 121 components and 1.43722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210330Jy sigma=0.001314 ! Fit after self-cal, rms=0.210080Jy sigma=0.001308 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134131 Jy ! Component: 100 - total flux cleaned = 0.0183705 Jy ! Component: 150 - total flux cleaned = 0.0216009 Jy ! Component: 200 - total flux cleaned = 0.0239434 Jy ! Total flux subtracted in 200 components = 0.0239434 Jy ! Clean residual min=-0.010606 max=0.012695 Jy/beam ! Clean residual mean=0.000242 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 1.46117 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 1.46117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209031Jy sigma=0.001291 ! Fit after self-cal, rms=0.208941Jy sigma=0.001289 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (1.4, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107964 Jy ! Component: 100 - total flux cleaned = 0.0147145 Jy ! Component: 150 - total flux cleaned = 0.0168266 Jy ! Component: 200 - total flux cleaned = 0.0180288 Jy ! Total flux subtracted in 200 components = 0.0180288 Jy ! Clean residual min=-0.009941 max=0.010073 Jy/beam ! Clean residual mean=-0.000082 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 1.4792 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 1.4792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208229Jy sigma=0.001280 ! Fit after self-cal, rms=0.208142Jy sigma=0.001280 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208142Jy sigma=0.001280 ! Fit after self-cal, rms=0.218007Jy sigma=0.001266 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=2.23 mas, bmaj=4.868 mas, bpa=7.25 degrees ! Estimated noise=1313.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161238 Jy ! Component: 100 - total flux cleaned = 0.0252569 Jy ! Component: 150 - total flux cleaned = 0.0312869 Jy ! Component: 200 - total flux cleaned = 0.0340162 Jy ! Total flux subtracted in 200 components = 0.0340162 Jy ! Clean residual min=-0.009087 max=0.012772 Jy/beam ! Clean residual mean=0.000454 rms=0.003372 Jy/beam ! Combined flux in latest and established models = 1.51321 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 176 components and 1.51321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217554Jy sigma=0.001258 ! Fit after self-cal, rms=0.217502Jy sigma=0.001256 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286715 Jy ! Component: 100 - total flux cleaned = 0.00404701 Jy ! Component: 150 - total flux cleaned = 0.00471295 Jy ! Component: 200 - total flux cleaned = 0.00506247 Jy ! Total flux subtracted in 200 components = 0.00506247 Jy ! Clean residual min=-0.009678 max=0.012204 Jy/beam ! Clean residual mean=0.000244 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 1.51827 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 194 components and 1.51828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217472Jy sigma=0.001256 ! Fit after self-cal, rms=0.217442Jy sigma=0.001255 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7249 mas, bmaj=2.229 mas, bpa=3.521 degrees ! Estimated noise=1009.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7249 x 2.229 at 3.521 degrees (North through East) ! Clean map min=-0.0068122 max=0.87403 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217442Jy sigma=0.001255 ! Fit after self-cal, rms=0.292608Jy sigma=0.001151 ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7246 mas, bmaj=2.228 mas, bpa=3.507 degrees ! Estimated noise=1011.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588343 Jy ! Component: 100 - total flux cleaned = 0.00855867 Jy ! Component: 150 - total flux cleaned = 0.0100606 Jy ! Component: 200 - total flux cleaned = 0.0115388 Jy ! Total flux subtracted in 200 components = 0.0115388 Jy ! Clean residual min=-0.006010 max=0.008230 Jy/beam ! Clean residual mean=0.000309 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.52981 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 207 components and 1.52981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292370Jy sigma=0.001147 ! Fit after self-cal, rms=0.292356Jy sigma=0.001147 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (10.2, -20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780882 Jy ! Component: 100 - total flux cleaned = 0.0103059 Jy ! Component: 150 - total flux cleaned = 0.0119779 Jy ! Component: 200 - total flux cleaned = 0.0128449 Jy ! Total flux subtracted in 200 components = 0.0128449 Jy ! Clean residual min=-0.005909 max=0.007169 Jy/beam ! Clean residual mean=0.000135 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 1.54266 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 228 components and 1.54266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292076Jy sigma=0.001142 ! Fit after self-cal, rms=0.292043Jy sigma=0.001141 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (-10, -22.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578493 Jy ! Component: 100 - total flux cleaned = 0.00676502 Jy ! Component: 150 - total flux cleaned = 0.00688664 Jy ! Component: 200 - total flux cleaned = 0.00711297 Jy ! Total flux subtracted in 200 components = 0.00711297 Jy ! Clean residual min=-0.005371 max=0.006885 Jy/beam ! Clean residual mean=0.000068 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 1.54977 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 243 components and 1.54977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291836Jy sigma=0.001138 ! Fit after self-cal, rms=0.291788Jy sigma=0.001137 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (8.4, 19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593436 Jy ! Component: 100 - total flux cleaned = 0.0075453 Jy ! Component: 150 - total flux cleaned = 0.00831505 Jy ! Component: 200 - total flux cleaned = 0.00902632 Jy ! Total flux subtracted in 200 components = 0.00902632 Jy ! Clean residual min=-0.005303 max=0.006074 Jy/beam ! Clean residual mean=-0.000034 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 1.5588 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 259 components and 1.5588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291568Jy sigma=0.001134 ! Fit after self-cal, rms=0.291530Jy sigma=0.001134 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (1.8, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479886 Jy ! Component: 100 - total flux cleaned = 0.00428054 Jy ! Component: 150 - total flux cleaned = 0.00439158 Jy ! Component: 200 - total flux cleaned = 0.00438753 Jy ! Total flux subtracted in 200 components = 0.00438753 Jy ! Clean residual min=-0.005295 max=0.004903 Jy/beam ! Clean residual mean=-0.000112 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 1.56319 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 272 components and 1.56319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291333Jy sigma=0.001131 ! Fit after self-cal, rms=0.291316Jy sigma=0.001131 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291316Jy sigma=0.001131 ! Fit after self-cal, rms=0.317308Jy sigma=0.001127 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.6503 mas, bmaj=1.873 mas, bpa=3.68 degrees ! Estimated noise=1291.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.753564 Jy ! Component: 100 - total flux cleaned = 1.0163 Jy ! Component: 150 - total flux cleaned = 1.13725 Jy ! Component: 200 - total flux cleaned = 1.20701 Jy ! Total flux subtracted in 200 components = 1.20701 Jy ! Clean residual min=-0.021410 max=0.040026 Jy/beam ! Clean residual mean=0.000738 rms=0.008035 Jy/beam ! Combined flux in latest and established models = 1.20701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.20701 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7244 mas, bmaj=2.225 mas, bpa=3.476 degrees ! Estimated noise=1011.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066597 Jy ! Component: 100 - total flux cleaned = 0.117155 Jy ! Component: 150 - total flux cleaned = 0.156814 Jy ! Component: 200 - total flux cleaned = 0.188261 Jy ! Total flux subtracted in 200 components = 0.188261 Jy ! Clean residual min=-0.009483 max=0.020831 Jy/beam ! Clean residual mean=0.002959 rms=0.004121 Jy/beam ! Combined flux in latest and established models = 1.39527 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 80 components and 1.39527 Jy ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (3.8, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255827 Jy ! Component: 100 - total flux cleaned = 0.0460447 Jy ! Component: 150 - total flux cleaned = 0.0628517 Jy ! Component: 200 - total flux cleaned = 0.0769149 Jy ! Total flux subtracted in 200 components = 0.0769149 Jy ! Clean residual min=-0.006342 max=0.011039 Jy/beam ! Clean residual mean=0.001633 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 1.47218 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 126 components and 1.47218 Jy ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Added new window around map position (11.8, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126911 Jy ! Component: 100 - total flux cleaned = 0.023324 Jy ! Component: 150 - total flux cleaned = 0.0327401 Jy ! Component: 200 - total flux cleaned = 0.0411138 Jy ! Total flux subtracted in 200 components = 0.0411138 Jy ! Clean residual min=-0.005214 max=0.007317 Jy/beam ! Clean residual mean=0.000997 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 1.51329 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 170 components and 1.51329 Jy ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=2.224 mas, bmaj=4.855 mas, bpa=7.274 degrees ! Estimated noise=1320.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139551 Jy ! Component: 100 - total flux cleaned = 0.0243973 Jy ! Component: 150 - total flux cleaned = 0.0327357 Jy ! Component: 200 - total flux cleaned = 0.0394965 Jy ! Total flux subtracted in 200 components = 0.0394965 Jy ! Clean residual min=-0.005830 max=0.005873 Jy/beam ! Clean residual mean=0.000870 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 1.55279 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552932 Jy ! Component: 100 - total flux cleaned = 0.0100816 Jy ! Component: 150 - total flux cleaned = 0.0139024 Jy ! Component: 200 - total flux cleaned = 0.0171365 Jy ! Total flux subtracted in 200 components = 0.0171365 Jy ! Clean residual min=-0.005562 max=0.005920 Jy/beam ! Clean residual mean=0.000301 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 1.56993 Jy ! Adding 121 model components to the UV plane model. ! The established model now contains 275 components and 1.56993 Jy ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! Estimated beam: bmin=0.7244 mas, bmaj=2.225 mas, bpa=3.476 degrees ! Estimated noise=1011.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146805 Jy ! Component: 100 - total flux cleaned = 0.0027905 Jy ! Component: 150 - total flux cleaned = 0.00409123 Jy ! Component: 200 - total flux cleaned = 0.00506399 Jy ! Total flux subtracted in 200 components = 0.00506399 Jy ! Clean residual min=-0.005228 max=0.004460 Jy/beam ! Clean residual mean=0.000036 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 1.57499 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 296 components and 1.57499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317203Jy sigma=0.001125 ! Fit after self-cal, rms=0.317149Jy sigma=0.001123 wmodel J1517-2422_X_2001_04_09_pus_map.mod ! Writing 296 model components to file: J1517-2422_X_2001_04_09_pus_map.mod wobs J1517-2422_X_2001_04_09_pus_uvs.fits ! Writing UV FITS file: J1517-2422_X_2001_04_09_pus_uvs.fits wwins J1517-2422_X_2001_04_09_pus_map.win ! wwins: Wrote 11 windows to J1517-2422_X_2001_04_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00089485 Jy ! Component: 100 - total flux cleaned = -0.00142243 Jy ! Component: 150 - total flux cleaned = -0.0017106 Jy ! Component: 200 - total flux cleaned = -0.00219581 Jy ! Component: 250 - total flux cleaned = -0.00253237 Jy ! Component: 300 - total flux cleaned = -0.00285977 Jy ! Component: 350 - total flux cleaned = -0.00298748 Jy ! Component: 400 - total flux cleaned = -0.00311338 Jy ! Component: 450 - total flux cleaned = -0.00336026 Jy ! Component: 500 - total flux cleaned = -0.00354132 Jy ! Component: 550 - total flux cleaned = -0.00360052 Jy ! Component: 600 - total flux cleaned = -0.0037746 Jy ! Component: 650 - total flux cleaned = -0.0037743 Jy ! Component: 700 - total flux cleaned = -0.00377448 Jy ! Component: 750 - total flux cleaned = -0.00388567 Jy ! Component: 800 - total flux cleaned = -0.00394025 Jy ! Component: 850 - total flux cleaned = -0.00404714 Jy ! Component: 900 - total flux cleaned = -0.00399416 Jy ! Component: 950 - total flux cleaned = -0.00404613 Jy ! Component: 1000 - total flux cleaned = -0.00409734 Jy ! Component: 1050 - total flux cleaned = -0.00414824 Jy ! Component: 1100 - total flux cleaned = -0.00424871 Jy ! Component: 1150 - total flux cleaned = -0.00424889 Jy ! Component: 1200 - total flux cleaned = -0.00429799 Jy ! Component: 1250 - total flux cleaned = -0.00429838 Jy ! Component: 1300 - total flux cleaned = -0.0043936 Jy ! Component: 1350 - total flux cleaned = -0.00439341 Jy ! Component: 1400 - total flux cleaned = -0.00439341 Jy ! Component: 1450 - total flux cleaned = -0.00448602 Jy ! Component: 1500 - total flux cleaned = -0.00453158 Jy ! Component: 1550 - total flux cleaned = -0.00453146 Jy ! Component: 1600 - total flux cleaned = -0.00448663 Jy ! Component: 1650 - total flux cleaned = -0.00453137 Jy ! Component: 1700 - total flux cleaned = -0.00453113 Jy ! Component: 1750 - total flux cleaned = -0.00448773 Jy ! Component: 1800 - total flux cleaned = -0.0045741 Jy ! Component: 1850 - total flux cleaned = -0.00453103 Jy ! Component: 1900 - total flux cleaned = -0.00448832 Jy ! Component: 1950 - total flux cleaned = -0.0044463 Jy ! Component: 2000 - total flux cleaned = -0.00440457 Jy ! Total flux subtracted in 2048 components = -0.00440442 Jy ! Clean residual min=-0.002867 max=0.002569 Jy/beam ! Clean residual mean=0.000091 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 1.57059 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 426 components and 1.57059 Jy ![Exited script file: muppet] wmap "J1517-2422_X_2001_04_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7244 x 2.225 at 3.476 degrees (North through East) ! Clean map min=-0.0035201 max=0.87232 Jy/beam ! Writing clean map to FITS file: J1517-2422_X_2001_04_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.872319 invert ! Inverting map ! Your choice of large map pixels excluded 1.65% of the data. ! The x-axis pixel size should ideally be below 0.1901 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000761395 device "J1517-2422_X_2001_04_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1517-2422_X_2001_04_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.261852 0.261852 0.523704 1.04741 2.09482 4.18963 8.37926 16.7585 33.5171 67.0341 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.872 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7244 x 2.225 at 3.476 degrees (North through East) ! Clean map min=-0.0035201 max=0.87232 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1517-2422_X_2001_04_09_pus\_map.gif/vgif" ! Attempting to open device: 'J1517-2422_X_2001_04_09_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1517-2422_X_2001_04_09_pus_uvs.log closed on Tue Oct 2 11:20:20 2007