! Started logfile: J0745+1011_X_2001_03_12_pus_uvs.log on Wed Jan 2 19:52:10 2013 obs J0745+1011_X_2001_03_12_pus_uva.fits ! Reading UV FITS file: J0745+1011_X_2001_03_12_pus_uva.fits ! AN table 1: 38 integrations on 136 of 136 possible baselines. ! AN table 2: 41 integrations on 136 of 136 possible baselines. ! AN table 3: 54 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.14927 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0745+1011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1749 lines of history. ! ! Reading 10800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0745+1011_X_2001_03_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 423 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 423 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 423 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 423 telescope corrections were flagged in sub-array 2. ! A total of 726 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.856444Jy sigma=0.008180 ! Fit after self-cal, rms=0.644792Jy sigma=0.006328 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.606 mas, bmaj=1.806 mas, bpa=-5.853 degrees ! Estimated noise=1002.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.849211 Jy ! Component: 100 - total flux cleaned = 1.19149 Jy ! Total flux subtracted in 100 components = 1.19149 Jy ! Clean residual min=-0.052162 max=0.169698 Jy/beam ! Clean residual mean=-0.000444 rms=0.018310 Jy/beam ! Combined flux in latest and established models = 1.19149 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.19149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.479108Jy sigma=0.004775 ! Fit after self-cal, rms=0.478546Jy sigma=0.004771 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208373 Jy ! Component: 100 - total flux cleaned = 0.346265 Jy ! Total flux subtracted in 100 components = 0.346265 Jy ! Clean residual min=-0.035170 max=0.085887 Jy/beam ! Clean residual mean=-0.000324 rms=0.011299 Jy/beam ! Combined flux in latest and established models = 1.53775 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 1.53775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322632Jy sigma=0.003105 ! Fit after self-cal, rms=0.319853Jy sigma=0.003087 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (0, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108006 Jy ! Component: 100 - total flux cleaned = 0.184883 Jy ! Total flux subtracted in 100 components = 0.184883 Jy ! Clean residual min=-0.027876 max=0.063329 Jy/beam ! Clean residual mean=-0.000248 rms=0.008196 Jy/beam ! Combined flux in latest and established models = 1.72263 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 1.72263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254196Jy sigma=0.002370 ! Fit after self-cal, rms=0.251699Jy sigma=0.002351 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (-0.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700881 Jy ! Component: 100 - total flux cleaned = 0.122083 Jy ! Total flux subtracted in 100 components = 0.122083 Jy ! Clean residual min=-0.023127 max=0.050515 Jy/beam ! Clean residual mean=-0.000203 rms=0.006324 Jy/beam ! Combined flux in latest and established models = 1.84472 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 1.84472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217299Jy sigma=0.001962 ! Fit after self-cal, rms=0.215655Jy sigma=0.001949 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (0.8, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499296 Jy ! Component: 100 - total flux cleaned = 0.0858806 Jy ! Total flux subtracted in 100 components = 0.0858806 Jy ! Clean residual min=-0.018930 max=0.039574 Jy/beam ! Clean residual mean=-0.000169 rms=0.005084 Jy/beam ! Combined flux in latest and established models = 1.9306 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 88 components and 1.9306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196380Jy sigma=0.001720 ! Fit after self-cal, rms=0.195115Jy sigma=0.001711 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (0.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370255 Jy ! Component: 100 - total flux cleaned = 0.0652791 Jy ! Total flux subtracted in 100 components = 0.0652791 Jy ! Clean residual min=-0.016488 max=0.017964 Jy/beam ! Clean residual mean=-0.000142 rms=0.004216 Jy/beam ! Combined flux in latest and established models = 1.99588 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 1.99588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183685Jy sigma=0.001576 ! Fit after self-cal, rms=0.183374Jy sigma=0.001574 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6877 mas, bmaj=2.005 mas, bpa=-6.568 degrees ! Estimated noise=756.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402294 Jy ! Component: 100 - total flux cleaned = 0.0685477 Jy ! Component: 150 - total flux cleaned = 0.089507 Jy ! Component: 200 - total flux cleaned = 0.105444 Jy ! Total flux subtracted in 200 components = 0.105444 Jy ! Clean residual min=-0.012928 max=0.012535 Jy/beam ! Clean residual mean=-0.000146 rms=0.003511 Jy/beam ! Combined flux in latest and established models = 2.10132 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 114 components and 2.10132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172271Jy sigma=0.001450 ! Fit after self-cal, rms=0.171782Jy sigma=0.001446 ! Inverting map ! Your choice of large map pixels excluded 2.99% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HH 1.00* HN 1.00* ! KK 0.95 KP 1.03 LA 0.99 MA 1.00* ! MC 1.00* MK 0.96 NL 1.05 ON 1.00* ! OV 0.98 PT 0.94 SC 1.00* TS 0.96 ! WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HH 1.00* HN 1.00 ! KK 0.97 KP 1.02 LA 0.96 MA 1.00* ! MC 1.00* MK 0.99 NL 1.00 ON 1.00* ! OV 0.97 PT 0.96 SC 1.00 TS 1.00* ! WZ 1.24 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.01 HH 1.00* HN 1.01 ! KK 0.95 KP 0.96 LA 0.95 MA 1.00* ! MC 1.00* MK 0.96 NL 0.98 ON 1.00* ! OV 0.96 PT 0.95 SC 1.03 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HH 1.00* HN 1.00* ! KK 0.92 KP 0.97 LA 0.99 MA 1.00* ! MC 1.00* MK 0.97 NL 1.02 ON 1.00* ! OV 0.97 PT 0.98 SC 1.00* TS 0.99 ! WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HH 1.00* HN 0.99 ! KK 0.95 KP 0.96 LA 0.97 MA 1.00* ! MC 1.00* MK 1.00 NL 0.97 ON 1.00* ! OV 0.97 PT 0.99 SC 0.98 TS 1.00* ! WZ 1.25 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HH 1.00* HN 0.99 ! KK 0.92 KP 0.91 LA 0.95 MA 1.00* ! MC 1.00* MK 0.94 NL 0.96 ON 1.00* ! OV 0.97 PT 1.00 SC 1.02 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HH 1.00* HN 1.00* ! KK 1.02 KP 0.98 LA 1.03 MA 1.00* ! MC 1.00* MK 1.00 NL 1.08 ON 1.00* ! OV 1.02 PT 1.03 SC 1.00* TS 0.91 ! WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HH 1.00* HN 1.02 ! KK 1.05 KP 0.96 LA 1.00 MA 1.00* ! MC 1.00* MK 1.04 NL 1.00 ON 1.00* ! OV 1.02 PT 1.03 SC 1.03 TS 1.00* ! WZ 1.25 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HH 1.00* HN 1.02 ! KK 1.07 KP 0.92 LA 0.99 MA 1.00* ! MC 1.00* MK 0.96 NL 1.01 ON 1.00* ! OV 1.01 PT 1.03 SC 1.05 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HH 1.00* HN 1.00* ! KK 0.97 KP 1.00 LA 1.00 MA 1.00* ! MC 1.00* MK 1.05 NL 1.10 ON 1.00* ! OV 1.01 PT 1.04 SC 1.00* TS 0.90 ! WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HH 1.00* HN 1.02 ! KK 0.99 KP 0.98 LA 0.98 MA 1.00* ! MC 1.00* MK 1.08 NL 1.03 ON 1.00* ! OV 1.01 PT 1.03 SC 1.08 TS 1.00* ! WZ 1.35 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HH 1.00* HN 1.03 ! KK 0.99 KP 0.93 LA 0.97 MA 1.00* ! MC 1.00* MK 1.01 NL 1.03 ON 1.00* ! OV 1.00 PT 1.03 SC 1.18 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.171782Jy sigma=0.001446 ! Fit after self-cal, rms=0.160435Jy sigma=0.001264 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6948 mas, bmaj=2.026 mas, bpa=-6.117 degrees ! Estimated noise=762.559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00899324 Jy ! Component: 100 - total flux cleaned = 0.0101638 Jy ! Component: 150 - total flux cleaned = 0.0101624 Jy ! Component: 200 - total flux cleaned = 0.0103687 Jy ! Total flux subtracted in 200 components = 0.0103687 Jy ! Clean residual min=-0.006258 max=0.010202 Jy/beam ! Clean residual mean=-0.000027 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 2.11169 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 2.11169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159272Jy sigma=0.001253 ! Fit after self-cal, rms=0.159092Jy sigma=0.001251 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (5, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829362 Jy ! Component: 100 - total flux cleaned = 0.0114684 Jy ! Component: 150 - total flux cleaned = 0.0126468 Jy ! Component: 200 - total flux cleaned = 0.0138173 Jy ! Total flux subtracted in 200 components = 0.0138173 Jy ! Clean residual min=-0.005122 max=0.006522 Jy/beam ! Clean residual mean=-0.000005 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 2.12551 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 141 components and 2.12551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158278Jy sigma=0.001243 ! Fit after self-cal, rms=0.158187Jy sigma=0.001243 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158187Jy sigma=0.001243 ! Fit after self-cal, rms=0.158634Jy sigma=0.001241 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6957 mas, bmaj=2.028 mas, bpa=-6.124 degrees ! Estimated noise=763.716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396262 Jy ! Component: 100 - total flux cleaned = 0.00611664 Jy ! Component: 150 - total flux cleaned = 0.00733783 Jy ! Component: 200 - total flux cleaned = 0.00841792 Jy ! Total flux subtracted in 200 components = 0.00841792 Jy ! Clean residual min=-0.004637 max=0.005949 Jy/beam ! Clean residual mean=-0.000024 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 2.13392 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 149 components and 2.13392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158239Jy sigma=0.001237 ! Fit after self-cal, rms=0.158158Jy sigma=0.001236 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344542 Jy ! Component: 100 - total flux cleaned = 0.0010071 Jy ! Component: 150 - total flux cleaned = 0.00218071 Jy ! Component: 200 - total flux cleaned = 0.00281065 Jy ! Total flux subtracted in 200 components = 0.00281065 Jy ! Clean residual min=-0.004624 max=0.005863 Jy/beam ! Clean residual mean=-0.000020 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 2.13674 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 154 components and 2.13674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157959Jy sigma=0.001234 ! Fit after self-cal, rms=0.157909Jy sigma=0.001234 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157909Jy sigma=0.001234 ! Fit after self-cal, rms=0.158246Jy sigma=0.001234 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.696 mas, bmaj=2.028 mas, bpa=-6.112 degrees ! Estimated noise=764.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179486 Jy ! Component: 100 - total flux cleaned = 0.00298645 Jy ! Component: 150 - total flux cleaned = 0.00381862 Jy ! Component: 200 - total flux cleaned = 0.00447824 Jy ! Total flux subtracted in 200 components = 0.00447824 Jy ! Clean residual min=-0.004533 max=0.005935 Jy/beam ! Clean residual mean=-0.000029 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 2.14121 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 161 components and 2.14121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158109Jy sigma=0.001232 ! Fit after self-cal, rms=0.158067Jy sigma=0.001232 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.6, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496975 Jy ! Component: 100 - total flux cleaned = 0.00601164 Jy ! Component: 150 - total flux cleaned = 0.00698882 Jy ! Component: 200 - total flux cleaned = 0.00760079 Jy ! Total flux subtracted in 200 components = 0.00760079 Jy ! Clean residual min=-0.004339 max=0.005232 Jy/beam ! Clean residual mean=-0.000026 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 2.14881 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 173 components and 2.14881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157883Jy sigma=0.001230 ! Fit after self-cal, rms=0.157852Jy sigma=0.001230 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157852Jy sigma=0.001230 ! Fit after self-cal, rms=0.158127Jy sigma=0.001230 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=2.221 mas, bmaj=3.193 mas, bpa=-5.618 degrees ! Estimated noise=999.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052921 Jy ! Component: 100 - total flux cleaned = 0.00736712 Jy ! Component: 150 - total flux cleaned = 0.00825387 Jy ! Component: 200 - total flux cleaned = 0.00876225 Jy ! Total flux subtracted in 200 components = 0.00876225 Jy ! Clean residual min=-0.006055 max=0.006886 Jy/beam ! Clean residual mean=-0.000059 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 2.15758 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 184 components and 2.15758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158063Jy sigma=0.001229 ! Fit after self-cal, rms=0.158033Jy sigma=0.001229 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436347 Jy ! Component: 100 - total flux cleaned = 0.00112856 Jy ! Component: 150 - total flux cleaned = 0.0011297 Jy ! Component: 200 - total flux cleaned = 0.00106004 Jy ! Total flux subtracted in 200 components = 0.00106004 Jy ! Clean residual min=-0.005835 max=0.006645 Jy/beam ! Clean residual mean=-0.000053 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 2.15864 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 193 components and 2.15864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158064Jy sigma=0.001229 ! Fit after self-cal, rms=0.158041Jy sigma=0.001229 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6964 mas, bmaj=2.028 mas, bpa=-6.107 degrees ! Estimated noise=764.689 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6964 x 2.028 at -6.107 degrees (North through East) ! Clean map min=-0.0041714 max=1.0803 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158041Jy sigma=0.001229 ! Fit after self-cal, rms=0.149564Jy sigma=0.001130 ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6952 mas, bmaj=2.03 mas, bpa=-6.101 degrees ! Estimated noise=764.569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235489 Jy ! Component: 100 - total flux cleaned = 0.000232298 Jy ! Component: 150 - total flux cleaned = 0.000312768 Jy ! Component: 200 - total flux cleaned = 0.00038917 Jy ! Total flux subtracted in 200 components = 0.00038917 Jy ! Clean residual min=-0.004448 max=0.004643 Jy/beam ! Clean residual mean=-0.000029 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 2.15903 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 200 components and 2.15903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149478Jy sigma=0.001129 ! Fit after self-cal, rms=0.149464Jy sigma=0.001129 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.91908e-05 Jy ! Component: 100 - total flux cleaned = 0.000165164 Jy ! Component: 150 - total flux cleaned = 0.000375188 Jy ! Component: 200 - total flux cleaned = 0.000506112 Jy ! Total flux subtracted in 200 components = 0.000506112 Jy ! Clean residual min=-0.004407 max=0.004556 Jy/beam ! Clean residual mean=-0.000029 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 2.15953 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 205 components and 2.15953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149423Jy sigma=0.001128 ! Fit after self-cal, rms=0.149410Jy sigma=0.001128 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149410Jy sigma=0.001128 ! Fit after self-cal, rms=0.149615Jy sigma=0.001128 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.609 mas, bmaj=1.828 mas, bpa=-5.596 degrees ! Estimated noise=1013.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.850061 Jy ! Component: 100 - total flux cleaned = 1.20191 Jy ! Component: 150 - total flux cleaned = 1.42265 Jy ! Component: 200 - total flux cleaned = 1.57064 Jy ! Total flux subtracted in 200 components = 1.57064 Jy ! Clean residual min=-0.029443 max=0.082362 Jy/beam ! Clean residual mean=-0.000269 rms=0.010145 Jy/beam ! Combined flux in latest and established models = 1.57064 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.57064 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6955 mas, bmaj=2.03 mas, bpa=-6.093 degrees ! Estimated noise=764.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170623 Jy ! Component: 100 - total flux cleaned = 0.2793 Jy ! Component: 150 - total flux cleaned = 0.353913 Jy ! Component: 200 - total flux cleaned = 0.407142 Jy ! Total flux subtracted in 200 components = 0.407142 Jy ! Clean residual min=-0.010396 max=0.029888 Jy/beam ! Clean residual mean=-0.000182 rms=0.004694 Jy/beam ! Combined flux in latest and established models = 1.97779 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 99 components and 1.97779 Jy ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386559 Jy ! Component: 100 - total flux cleaned = 0.0670834 Jy ! Component: 150 - total flux cleaned = 0.0880924 Jy ! Component: 200 - total flux cleaned = 0.103777 Jy ! Total flux subtracted in 200 components = 0.103777 Jy ! Clean residual min=-0.006399 max=0.011432 Jy/beam ! Clean residual mean=-0.000102 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 2.08156 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 124 components and 2.08156 Jy ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (3.2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126954 Jy ! Component: 100 - total flux cleaned = 0.0226622 Jy ! Component: 150 - total flux cleaned = 0.0310467 Jy ! Component: 200 - total flux cleaned = 0.0382083 Jy ! Total flux subtracted in 200 components = 0.0382083 Jy ! Clean residual min=-0.005274 max=0.006852 Jy/beam ! Clean residual mean=-0.000063 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 2.11977 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 152 components and 2.11977 Jy ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Added new window around map position (4.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695698 Jy ! Component: 100 - total flux cleaned = 0.0125164 Jy ! Component: 150 - total flux cleaned = 0.0164888 Jy ! Component: 200 - total flux cleaned = 0.0199125 Jy ! Total flux subtracted in 200 components = 0.0199125 Jy ! Clean residual min=-0.004785 max=0.005222 Jy/beam ! Clean residual mean=-0.000041 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 2.13968 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 174 components and 2.13968 Jy ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=2.22 mas, bmaj=3.194 mas, bpa=-5.595 degrees ! Estimated noise=999.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766817 Jy ! Component: 100 - total flux cleaned = 0.013114 Jy ! Component: 150 - total flux cleaned = 0.017285 Jy ! Component: 200 - total flux cleaned = 0.020642 Jy ! Total flux subtracted in 200 components = 0.020642 Jy ! Clean residual min=-0.005187 max=0.005591 Jy/beam ! Clean residual mean=-0.000043 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 2.16033 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222458 Jy ! Component: 100 - total flux cleaned = 0.00365046 Jy ! Component: 150 - total flux cleaned = 0.0044879 Jy ! Component: 200 - total flux cleaned = 0.00516804 Jy ! Total flux subtracted in 200 components = 0.00516804 Jy ! Clean residual min=-0.004904 max=0.005468 Jy/beam ! Clean residual mean=-0.000030 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 2.16549 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 218 components and 2.16549 Jy ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! Estimated beam: bmin=0.6955 mas, bmaj=2.03 mas, bpa=-6.093 degrees ! Estimated noise=764.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611452 Jy ! Component: 100 - total flux cleaned = -0.000198384 Jy ! Component: 150 - total flux cleaned = 0.000369827 Jy ! Component: 200 - total flux cleaned = 0.000905227 Jy ! Total flux subtracted in 200 components = 0.000905227 Jy ! Clean residual min=-0.004355 max=0.004503 Jy/beam ! Clean residual mean=-0.000013 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 2.1664 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 230 components and 2.1664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150484Jy sigma=0.001129 ! Fit after self-cal, rms=0.149963Jy sigma=0.001128 wmodel J0745+1011_X_2001_03_12_pus_map.mod ! Writing 230 model components to file: J0745+1011_X_2001_03_12_pus_map.mod wobs J0745+1011_X_2001_03_12_pus_uvs.fits ! Writing UV FITS file: J0745+1011_X_2001_03_12_pus_uvs.fits wwins J0745+1011_X_2001_03_12_pus_map.win ! wwins: Wrote 9 windows to J0745+1011_X_2001_03_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172298 Jy ! Component: 100 - total flux cleaned = 0.00284775 Jy ! Component: 150 - total flux cleaned = 0.00355427 Jy ! Component: 200 - total flux cleaned = 0.00368949 Jy ! Component: 250 - total flux cleaned = 0.00349257 Jy ! Component: 300 - total flux cleaned = 0.00355617 Jy ! Component: 350 - total flux cleaned = 0.00374206 Jy ! Component: 400 - total flux cleaned = 0.00386181 Jy ! Component: 450 - total flux cleaned = 0.00368354 Jy ! Component: 500 - total flux cleaned = 0.00403302 Jy ! Component: 550 - total flux cleaned = 0.00397474 Jy ! Component: 600 - total flux cleaned = 0.00414405 Jy ! Component: 650 - total flux cleaned = 0.00414271 Jy ! Component: 700 - total flux cleaned = 0.0039782 Jy ! Component: 750 - total flux cleaned = 0.0039781 Jy ! Component: 800 - total flux cleaned = 0.00397837 Jy ! Component: 850 - total flux cleaned = 0.00413724 Jy ! Component: 900 - total flux cleaned = 0.00418879 Jy ! Component: 950 - total flux cleaned = 0.00434431 Jy ! Component: 1000 - total flux cleaned = 0.00444626 Jy ! Component: 1050 - total flux cleaned = 0.00454645 Jy ! Component: 1100 - total flux cleaned = 0.00464635 Jy ! Component: 1150 - total flux cleaned = 0.00474519 Jy ! Component: 1200 - total flux cleaned = 0.00469517 Jy ! Component: 1250 - total flux cleaned = 0.00469504 Jy ! Component: 1300 - total flux cleaned = 0.00440791 Jy ! Component: 1350 - total flux cleaned = 0.00455123 Jy ! Component: 1400 - total flux cleaned = 0.00455096 Jy ! Component: 1450 - total flux cleaned = 0.00459778 Jy ! Component: 1500 - total flux cleaned = 0.00441248 Jy ! Component: 1550 - total flux cleaned = 0.00455012 Jy ! Component: 1600 - total flux cleaned = 0.00450434 Jy ! Component: 1650 - total flux cleaned = 0.00454981 Jy ! Component: 1700 - total flux cleaned = 0.0045051 Jy ! Component: 1750 - total flux cleaned = 0.00468225 Jy ! Component: 1800 - total flux cleaned = 0.00459449 Jy ! Component: 1850 - total flux cleaned = 0.00468134 Jy ! Component: 1900 - total flux cleaned = 0.00463805 Jy ! Component: 1950 - total flux cleaned = 0.00455139 Jy ! Component: 2000 - total flux cleaned = 0.00459433 Jy ! Total flux subtracted in 2048 components = 0.00455189 Jy ! Clean residual min=-0.002422 max=0.002307 Jy/beam ! Clean residual mean=-0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 2.17095 Jy keep ! Adding 167 model components to the UV plane model. ! The established model now contains 397 components and 2.17095 Jy ![Exited script file: muppet] wmap "J0745+1011_X_2001_03_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6955 x 2.03 at -6.093 degrees (North through East) ! Clean map min=-0.0030445 max=1.0821 Jy/beam ! Writing clean map to FITS file: J0745+1011_X_2001_03_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.08209 invert ! Inverting map ! Your choice of large map pixels excluded 2.79% of the data. ! The x-axis pixel size should ideally be below 0.1697 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00077267 device "J0745+1011_X_2001_03_12_pus\_map.eps/VPS" ! Attempting to open device: 'J0745+1011_X_2001_03_12_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.214216 0.214216 0.428433 0.856865 1.71373 3.42746 6.85492 13.7098 27.4197 54.8394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6955 x 2.03 at -6.093 degrees (North through East) ! Clean map min=-0.0030445 max=1.0821 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0745+1011_X_2001_03_12_pus_uvs.log closed on Wed Jan 2 19:52:16 2013