! Started logfile: J0241-0815_X_2001_03_12_pus_uvs.log on Wed Jan 2 19:49:58 2013 obs J0241-0815_X_2001_03_12_pus_uva.fits ! Reading UV FITS file: J0241-0815_X_2001_03_12_pus_uva.fits ! AN table 1: 144 integrations on 136 of 136 possible baselines. ! AN table 2: 250 integrations on 136 of 136 possible baselines. ! AN table 3: 87 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.0505687 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0241-0815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1753 lines of history. ! ! Reading 13232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0241-0815_X_2001_03_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2168 telescope corrections were flagged in sub-array 1. ! A total of 3976 telescope corrections were flagged in sub-array 2. ! A total of 904 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2167 telescope corrections were flagged in sub-array 1. ! A total of 3976 telescope corrections were flagged in sub-array 2. ! A total of 904 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2188 telescope corrections were flagged in sub-array 1. ! A total of 3976 telescope corrections were flagged in sub-array 2. ! A total of 905 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2175 telescope corrections were flagged in sub-array 1. ! A total of 3976 telescope corrections were flagged in sub-array 2. ! A total of 904 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.658869Jy sigma=0.004669 ! Fit after self-cal, rms=0.545559Jy sigma=0.004164 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.6632 mas, bmaj=1.357 mas, bpa=-0.4885 degrees ! Estimated noise=1136.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.413376 Jy ! Component: 100 - total flux cleaned = 0.556332 Jy ! Total flux subtracted in 100 components = 0.556332 Jy ! Clean residual min=-0.026216 max=0.066551 Jy/beam ! Clean residual mean=0.000145 rms=0.008660 Jy/beam ! Combined flux in latest and established models = 0.556332 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.556332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301982Jy sigma=0.002339 ! Fit after self-cal, rms=0.301792Jy sigma=0.002338 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.07403 Jy ! Component: 100 - total flux cleaned = 0.112894 Jy ! Total flux subtracted in 100 components = 0.112894 Jy ! Clean residual min=-0.022815 max=0.057072 Jy/beam ! Clean residual mean=0.000143 rms=0.007456 Jy/beam ! Combined flux in latest and established models = 0.669226 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.669226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277745Jy sigma=0.002099 ! Fit after self-cal, rms=0.277727Jy sigma=0.002098 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (5, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061422 Jy ! Component: 100 - total flux cleaned = 0.0978566 Jy ! Total flux subtracted in 100 components = 0.0978566 Jy ! Clean residual min=-0.019451 max=0.045919 Jy/beam ! Clean residual mean=0.000114 rms=0.006149 Jy/beam ! Combined flux in latest and established models = 0.767083 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.767083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256171Jy sigma=0.001827 ! Fit after self-cal, rms=0.254070Jy sigma=0.001814 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434468 Jy ! Component: 100 - total flux cleaned = 0.0711267 Jy ! Total flux subtracted in 100 components = 0.0711267 Jy ! Clean residual min=-0.016796 max=0.040952 Jy/beam ! Clean residual mean=0.000096 rms=0.005337 Jy/beam ! Combined flux in latest and established models = 0.83821 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.83821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241919Jy sigma=0.001662 ! Fit after self-cal, rms=0.240913Jy sigma=0.001654 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (-2.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362591 Jy ! Component: 100 - total flux cleaned = 0.0601774 Jy ! Total flux subtracted in 100 components = 0.0601774 Jy ! Clean residual min=-0.015996 max=0.034012 Jy/beam ! Clean residual mean=0.000094 rms=0.004703 Jy/beam ! Combined flux in latest and established models = 0.898387 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.898387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233140Jy sigma=0.001558 ! Fit after self-cal, rms=0.232916Jy sigma=0.001556 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (6, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314545 Jy ! Component: 100 - total flux cleaned = 0.0531832 Jy ! Total flux subtracted in 100 components = 0.0531832 Jy ! Clean residual min=-0.014310 max=0.027309 Jy/beam ! Clean residual mean=0.000086 rms=0.004200 Jy/beam ! Combined flux in latest and established models = 0.95157 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.95157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226213Jy sigma=0.001473 ! Fit after self-cal, rms=0.225691Jy sigma=0.001471 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (-6.6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258923 Jy ! Component: 100 - total flux cleaned = 0.0452741 Jy ! Total flux subtracted in 100 components = 0.0452741 Jy ! Clean residual min=-0.012391 max=0.021614 Jy/beam ! Clean residual mean=0.000076 rms=0.003748 Jy/beam ! Combined flux in latest and established models = 0.996844 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 92 components and 0.996844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221525Jy sigma=0.001418 ! Fit after self-cal, rms=0.221167Jy sigma=0.001417 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7814 mas, bmaj=1.479 mas, bpa=-3.014 degrees ! Estimated noise=824.302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351943 Jy ! Component: 100 - total flux cleaned = 0.0622747 Jy ! Component: 150 - total flux cleaned = 0.0857918 Jy ! Component: 200 - total flux cleaned = 0.106452 Jy ! Total flux subtracted in 200 components = 0.106452 Jy ! Clean residual min=-0.013496 max=0.019538 Jy/beam ! Clean residual mean=0.000362 rms=0.004128 Jy/beam ! Combined flux in latest and established models = 1.1033 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 116 components and 1.1033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212726Jy sigma=0.001311 ! Fit after self-cal, rms=0.212052Jy sigma=0.001309 ! Inverting map ! Your choice of large map pixels excluded 0.393% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HH 1.02 HN 1.06 ! KK 1.00* KP 1.00* LA 1.00* MA 0.86 ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.01 TS 1.00* ! WZ 1.05 ! ! A total of 159 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00* HH 1.00* HN 1.00 ! KK 1.00* KP 0.93 LA 1.01 MA 1.00* ! MC 1.00* MK 1.00* NL 0.99 ON 1.00* ! OV 0.95 PT 0.99 SC 1.02 TS 1.00* ! WZ 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.99 HH 1.00* HN 1.09 ! KK 0.98 KP 1.05 LA 0.91 MA 1.00* ! MC 1.00* MK 1.00 NL 1.04 ON 1.00* ! OV 0.96 PT 0.97 SC 1.07 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HH 0.98 HN 1.12 ! KK 1.00* KP 1.00* LA 1.00* MA 0.84 ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.94 TS 1.00* ! WZ 1.06 ! ! A total of 159 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00* HH 1.00* HN 1.00 ! KK 1.00* KP 0.86 LA 0.98 MA 1.00* ! MC 1.00* MK 1.00* NL 0.97 ON 1.00* ! OV 0.92 PT 1.05 SC 0.98 TS 1.00* ! WZ 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.98 HH 1.00* HN 1.06 ! KK 0.97 KP 0.98 LA 0.91 MA 1.00* ! MC 1.00* MK 0.99 NL 0.99 ON 1.00* ! OV 0.99 PT 1.02 SC 1.03 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HH 0.95 HN 1.13 ! KK 1.00* KP 1.00* LA 1.00* MA 0.76 ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.94 TS 1.00* ! WZ 1.15 ! ! A total of 159 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00* HH 1.00* HN 0.99 ! KK 1.00* KP 0.85 LA 1.02 MA 1.00* ! MC 1.00* MK 1.00* NL 0.98 ON 1.00* ! OV 0.97 PT 1.02 SC 1.00 TS 1.00* ! WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.97 HH 1.00* HN 1.07 ! KK 1.03 KP 0.96 LA 0.92 MA 1.00* ! MC 1.00* MK 0.98 NL 1.02 ON 1.00* ! OV 1.00 PT 1.01 SC 1.07 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HH 1.00 HN 0.93 ! KK 1.00* KP 1.00* LA 1.00* MA 0.92 ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.23 TS 1.00* ! WZ 1.02 ! ! A total of 159 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00* HH 1.00* HN 1.01 ! KK 1.00* KP 0.86 LA 0.97 MA 1.00* ! MC 1.00* MK 1.00* NL 0.98 ON 1.00* ! OV 0.98 PT 1.04 SC 1.05 TS 1.00* ! WZ 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.95 HH 1.00* HN 1.05 ! KK 1.00 KP 0.98 LA 0.90 MA 1.00* ! MC 1.00* MK 1.00 NL 1.04 ON 1.00* ! OV 0.97 PT 1.01 SC 1.11 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.212052Jy sigma=0.001309 ! Fit after self-cal, rms=0.168371Jy sigma=0.001273 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7914 mas, bmaj=1.843 mas, bpa=-4.631 degrees ! Estimated noise=805.634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165207 Jy ! Component: 100 - total flux cleaned = 0.0279308 Jy ! Component: 150 - total flux cleaned = 0.0373864 Jy ! Component: 200 - total flux cleaned = 0.0444418 Jy ! Total flux subtracted in 200 components = 0.0444418 Jy ! Clean residual min=-0.007375 max=0.013517 Jy/beam ! Clean residual mean=0.000188 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 1.14774 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 1.14774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166273Jy sigma=0.001248 ! Fit after self-cal, rms=0.166119Jy sigma=0.001247 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166119Jy sigma=0.001247 ! Fit after self-cal, rms=0.165354Jy sigma=0.001229 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7898 mas, bmaj=1.839 mas, bpa=-4.617 degrees ! Estimated noise=806.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749048 Jy ! Component: 100 - total flux cleaned = 0.0122874 Jy ! Component: 150 - total flux cleaned = 0.0145549 Jy ! Component: 200 - total flux cleaned = 0.0159227 Jy ! Total flux subtracted in 200 components = 0.0159227 Jy ! Clean residual min=-0.007038 max=0.013601 Jy/beam ! Clean residual mean=0.000094 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 1.16366 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 161 components and 1.16366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164884Jy sigma=0.001224 ! Fit after self-cal, rms=0.164850Jy sigma=0.001224 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.8, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128983 Jy ! Component: 100 - total flux cleaned = 0.0193726 Jy ! Component: 150 - total flux cleaned = 0.0238691 Jy ! Component: 200 - total flux cleaned = 0.0268629 Jy ! Total flux subtracted in 200 components = 0.0268629 Jy ! Clean residual min=-0.005862 max=0.008930 Jy/beam ! Clean residual mean=0.000073 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 1.19052 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 190 components and 1.19052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163948Jy sigma=0.001211 ! Fit after self-cal, rms=0.163855Jy sigma=0.001211 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (-8.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844675 Jy ! Component: 100 - total flux cleaned = 0.0130943 Jy ! Component: 150 - total flux cleaned = 0.0157314 Jy ! Component: 200 - total flux cleaned = 0.0175364 Jy ! Total flux subtracted in 200 components = 0.0175364 Jy ! Clean residual min=-0.005712 max=0.008224 Jy/beam ! Clean residual mean=0.000045 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 1.20806 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 205 components and 1.20806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163363Jy sigma=0.001205 ! Fit after self-cal, rms=0.163327Jy sigma=0.001205 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (0.4, 12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725531 Jy ! Component: 100 - total flux cleaned = 0.0113775 Jy ! Component: 150 - total flux cleaned = 0.0148349 Jy ! Component: 200 - total flux cleaned = 0.0161508 Jy ! Total flux subtracted in 200 components = 0.0161508 Jy ! Clean residual min=-0.005389 max=0.007869 Jy/beam ! Clean residual mean=0.000026 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 1.22421 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 222 components and 1.22421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162922Jy sigma=0.001201 ! Fit after self-cal, rms=0.162906Jy sigma=0.001201 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (-14.6, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731537 Jy ! Component: 100 - total flux cleaned = 0.0113639 Jy ! Component: 150 - total flux cleaned = 0.0147966 Jy ! Component: 200 - total flux cleaned = 0.017303 Jy ! Total flux subtracted in 200 components = 0.017303 Jy ! Clean residual min=-0.004982 max=0.007543 Jy/beam ! Clean residual mean=0.000018 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 1.24151 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 246 components and 1.24151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162546Jy sigma=0.001196 ! Fit after self-cal, rms=0.162519Jy sigma=0.001196 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622924 Jy ! Component: 100 - total flux cleaned = 0.00821575 Jy ! Component: 150 - total flux cleaned = 0.010163 Jy ! Component: 200 - total flux cleaned = 0.0119667 Jy ! Total flux subtracted in 200 components = 0.0119667 Jy ! Clean residual min=-0.004817 max=0.006009 Jy/beam ! Clean residual mean=0.000006 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 1.25348 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 257 components and 1.25348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162199Jy sigma=0.001193 ! Fit after self-cal, rms=0.162163Jy sigma=0.001193 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162163Jy sigma=0.001193 ! Fit after self-cal, rms=0.161585Jy sigma=0.001190 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7882 mas, bmaj=1.839 mas, bpa=-4.655 degrees ! Estimated noise=804.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473578 Jy ! Component: 100 - total flux cleaned = 0.00809103 Jy ! Component: 150 - total flux cleaned = 0.0110562 Jy ! Component: 200 - total flux cleaned = 0.0136293 Jy ! Total flux subtracted in 200 components = 0.0136293 Jy ! Clean residual min=-0.004445 max=0.006491 Jy/beam ! Clean residual mean=0.000024 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 1.26711 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 268 components and 1.26711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161349Jy sigma=0.001187 ! Fit after self-cal, rms=0.161348Jy sigma=0.001187 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607514 Jy ! Component: 100 - total flux cleaned = 0.0098622 Jy ! Component: 150 - total flux cleaned = 0.0128007 Jy ! Component: 200 - total flux cleaned = 0.0148677 Jy ! Total flux subtracted in 200 components = 0.0148677 Jy ! Clean residual min=-0.004228 max=0.004354 Jy/beam ! Clean residual mean=0.000003 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 1.28198 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 295 components and 1.28198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161069Jy sigma=0.001184 ! Fit after self-cal, rms=0.161055Jy sigma=0.001184 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161055Jy sigma=0.001184 ! Fit after self-cal, rms=0.160608Jy sigma=0.001183 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=2.305 mas, bmaj=3.787 mas, bpa=0.884 degrees ! Estimated noise=1003.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595182 Jy ! Component: 100 - total flux cleaned = 0.0102807 Jy ! Component: 150 - total flux cleaned = 0.0139282 Jy ! Component: 200 - total flux cleaned = 0.0170615 Jy ! Total flux subtracted in 200 components = 0.0170615 Jy ! Clean residual min=-0.004972 max=0.004434 Jy/beam ! Clean residual mean=0.000018 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 1.29904 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 326 components and 1.29904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160509Jy sigma=0.001181 ! Fit after self-cal, rms=0.160488Jy sigma=0.001181 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250547 Jy ! Component: 100 - total flux cleaned = 0.00443613 Jy ! Component: 150 - total flux cleaned = 0.00615912 Jy ! Component: 200 - total flux cleaned = 0.00772357 Jy ! Total flux subtracted in 200 components = 0.00772357 Jy ! Clean residual min=-0.004740 max=0.004172 Jy/beam ! Clean residual mean=-0.000004 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 1.30676 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 352 components and 1.30676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160465Jy sigma=0.001181 ! Fit after self-cal, rms=0.160451Jy sigma=0.001181 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7872 mas, bmaj=1.84 mas, bpa=-4.67 degrees ! Estimated noise=803.349 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7872 x 1.84 at -4.67 degrees (North through East) ! Clean map min=-0.0032914 max=0.55466 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160451Jy sigma=0.001181 ! Fit after self-cal, rms=0.155175Jy sigma=0.001075 ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7835 mas, bmaj=1.837 mas, bpa=-4.75 degrees ! Estimated noise=802.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272682 Jy ! Component: 100 - total flux cleaned = 0.00409378 Jy ! Component: 150 - total flux cleaned = 0.00533453 Jy ! Component: 200 - total flux cleaned = 0.00648351 Jy ! Total flux subtracted in 200 components = 0.00648351 Jy ! Clean residual min=-0.003075 max=0.003236 Jy/beam ! Clean residual mean=0.000013 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 1.31325 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 382 components and 1.31325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155026Jy sigma=0.001074 ! Fit after self-cal, rms=0.155037Jy sigma=0.001074 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968001 Jy ! Component: 100 - total flux cleaned = 0.00185152 Jy ! Component: 150 - total flux cleaned = 0.00261294 Jy ! Component: 200 - total flux cleaned = 0.00326963 Jy ! Total flux subtracted in 200 components = 0.00326963 Jy ! Clean residual min=-0.003017 max=0.003198 Jy/beam ! Clean residual mean=0.000009 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.31652 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 394 components and 1.31652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154951Jy sigma=0.001073 ! Fit after self-cal, rms=0.154956Jy sigma=0.001073 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154956Jy sigma=0.001073 ! Fit after self-cal, rms=0.175311Jy sigma=0.001073 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.6698 mas, bmaj=1.552 mas, bpa=-2.811 degrees ! Estimated noise=1118.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.405672 Jy ! Component: 100 - total flux cleaned = 0.547864 Jy ! Component: 150 - total flux cleaned = 0.631882 Jy ! Component: 200 - total flux cleaned = 0.694947 Jy ! Total flux subtracted in 200 components = 0.694947 Jy ! Clean residual min=-0.021729 max=0.037304 Jy/beam ! Clean residual mean=0.000138 rms=0.006308 Jy/beam ! Combined flux in latest and established models = 0.694947 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.694947 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7823 mas, bmaj=1.837 mas, bpa=-4.79 degrees ! Estimated noise=801.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0819302 Jy ! Component: 100 - total flux cleaned = 0.141617 Jy ! Component: 150 - total flux cleaned = 0.189099 Jy ! Component: 200 - total flux cleaned = 0.228403 Jy ! Total flux subtracted in 200 components = 0.228403 Jy ! Clean residual min=-0.016317 max=0.024096 Jy/beam ! Clean residual mean=0.000534 rms=0.006047 Jy/beam ! Combined flux in latest and established models = 0.92335 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 56 components and 0.92335 Jy ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=2.304 mas, bmaj=3.789 mas, bpa=0.8263 degrees ! Estimated noise=1004.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615497 Jy ! Component: 100 - total flux cleaned = 0.107788 Jy ! Component: 150 - total flux cleaned = 0.143733 Jy ! Component: 200 - total flux cleaned = 0.173392 Jy ! Total flux subtracted in 200 components = 0.173392 Jy ! Clean residual min=-0.017498 max=0.018106 Jy/beam ! Clean residual mean=0.000658 rms=0.006199 Jy/beam ! Combined flux in latest and established models = 1.09674 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250829 Jy ! Component: 100 - total flux cleaned = 0.0464809 Jy ! Component: 150 - total flux cleaned = 0.0650774 Jy ! Component: 200 - total flux cleaned = 0.0813701 Jy ! Total flux subtracted in 200 components = 0.0813701 Jy ! Clean residual min=-0.011469 max=0.010369 Jy/beam ! Clean residual mean=0.000414 rms=0.003906 Jy/beam ! Combined flux in latest and established models = 1.17811 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 138 components and 1.17811 Jy ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! Estimated beam: bmin=0.7823 mas, bmaj=1.837 mas, bpa=-4.79 degrees ! Estimated noise=801.093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127295 Jy ! Component: 100 - total flux cleaned = 0.0232173 Jy ! Component: 150 - total flux cleaned = 0.0324696 Jy ! Component: 200 - total flux cleaned = 0.0408916 Jy ! Total flux subtracted in 200 components = 0.0408916 Jy ! Clean residual min=-0.005844 max=0.007422 Jy/beam ! Clean residual mean=0.000132 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 1.219 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 175 components and 1.219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177784Jy sigma=0.001100 ! Fit after self-cal, rms=0.177459Jy sigma=0.001098 wmodel J0241-0815_X_2001_03_12_pus_map.mod ! Writing 175 model components to file: J0241-0815_X_2001_03_12_pus_map.mod wobs J0241-0815_X_2001_03_12_pus_uvs.fits ! Writing UV FITS file: J0241-0815_X_2001_03_12_pus_uvs.fits wwins J0241-0815_X_2001_03_12_pus_map.win ! wwins: Wrote 14 windows to J0241-0815_X_2001_03_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304301 Jy ! Component: 100 - total flux cleaned = 0.0052243 Jy ! Component: 150 - total flux cleaned = 0.00719077 Jy ! Component: 200 - total flux cleaned = 0.00918326 Jy ! Component: 250 - total flux cleaned = 0.0109245 Jy ! Component: 300 - total flux cleaned = 0.0124321 Jy ! Component: 350 - total flux cleaned = 0.0139941 Jy ! Component: 400 - total flux cleaned = 0.0154295 Jy ! Component: 450 - total flux cleaned = 0.0170941 Jy ! Component: 500 - total flux cleaned = 0.0185501 Jy ! Component: 550 - total flux cleaned = 0.0199754 Jy ! Component: 600 - total flux cleaned = 0.0215372 Jy ! Component: 650 - total flux cleaned = 0.0231493 Jy ! Component: 700 - total flux cleaned = 0.024335 Jy ! Component: 750 - total flux cleaned = 0.0254236 Jy ! Component: 800 - total flux cleaned = 0.0265703 Jy ! Component: 850 - total flux cleaned = 0.0277718 Jy ! Component: 900 - total flux cleaned = 0.0288792 Jy ! Component: 950 - total flux cleaned = 0.0299686 Jy ! Component: 1000 - total flux cleaned = 0.0310397 Jy ! Component: 1050 - total flux cleaned = 0.0320222 Jy ! Component: 1100 - total flux cleaned = 0.0329207 Jy ! Component: 1150 - total flux cleaned = 0.0337381 Jy ! Component: 1200 - total flux cleaned = 0.0347467 Jy ! Component: 1250 - total flux cleaned = 0.0356729 Jy ! Component: 1300 - total flux cleaned = 0.0363253 Jy ! Component: 1350 - total flux cleaned = 0.0370347 Jy ! Component: 1400 - total flux cleaned = 0.0377972 Jy ! Component: 1450 - total flux cleaned = 0.0384255 Jy ! Component: 1500 - total flux cleaned = 0.0389823 Jy ! Component: 1550 - total flux cleaned = 0.0395951 Jy ! Component: 1600 - total flux cleaned = 0.0401989 Jy ! Component: 1650 - total flux cleaned = 0.0409143 Jy ! Component: 1700 - total flux cleaned = 0.0415628 Jy ! Component: 1750 - total flux cleaned = 0.042261 Jy ! Component: 1800 - total flux cleaned = 0.0426059 Jy ! Component: 1850 - total flux cleaned = 0.0432329 Jy ! Component: 1900 - total flux cleaned = 0.0437958 Jy ! Component: 1950 - total flux cleaned = 0.0442967 Jy ! Component: 2000 - total flux cleaned = 0.0447923 Jy ! Total flux subtracted in 2048 components = 0.0452285 Jy ! Clean residual min=-0.003091 max=0.002859 Jy/beam ! Clean residual mean=0.000063 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 1.26423 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 317 components and 1.26423 Jy ![Exited script file: muppet] wmap "J0241-0815_X_2001_03_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7823 x 1.837 at -4.79 degrees (North through East) ! Clean map min=-0.0035203 max=0.55606 Jy/beam ! Writing clean map to FITS file: J0241-0815_X_2001_03_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.556064 invert ! Inverting map ! Your choice of large map pixels excluded 0.441% of the data. ! The x-axis pixel size should ideally be below 0.1956 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103272 device "J0241-0815_X_2001_03_12_pus\_map.eps/VPS" ! Attempting to open device: 'J0241-0815_X_2001_03_12_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.55716 0.55716 1.11432 2.22864 4.45728 8.91456 17.8291 35.6582 71.3164 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.556 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7823 x 1.837 at -4.79 degrees (North through East) ! Clean map min=-0.0035203 max=0.55606 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0241-0815_X_2001_03_12_pus_uvs.log closed on Wed Jan 2 19:50:10 2013