! Started logfile: J2246-1206_S_2000_12_04_pus_uvs.log on Wed Oct 17 17:22:38 2007 obs J2246-1206_S_2000_12_04_pus_uva.fits ! Reading UV FITS file: J2246-1206_S_2000_12_04_pus_uva.fits ! AN table 1: 23 integrations on 190 of 190 possible baselines. ! AN table 2: 11 integrations on 190 of 190 possible baselines. ! AN table 3: 82 integrations on 190 of 190 possible baselines. ! AN table 4: 13 integrations on 190 of 190 possible baselines. ! AN table 5: 78 integrations on 190 of 190 possible baselines. ! AN table 6: 14 integrations on 190 of 190 possible baselines. ! AN table 7: 210 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.137697 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2246-1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2169 lines of history. ! ! Reading 45104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2246-1206_S_2000_12_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 226 telescope corrections were flagged in sub-array 1. ! A total of 208 telescope corrections were flagged in sub-array 2. ! A total of 1091 telescope corrections were flagged in sub-array 3. ! A total of 260 telescope corrections were flagged in sub-array 4. ! A total of 758 telescope corrections were flagged in sub-array 5. ! A total of 247 telescope corrections were flagged in sub-array 6. ! A total of 2725 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 226 telescope corrections were flagged in sub-array 1. ! A total of 208 telescope corrections were flagged in sub-array 2. ! A total of 1091 telescope corrections were flagged in sub-array 3. ! A total of 260 telescope corrections were flagged in sub-array 4. ! A total of 758 telescope corrections were flagged in sub-array 5. ! A total of 247 telescope corrections were flagged in sub-array 6. ! A total of 2725 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 226 telescope corrections were flagged in sub-array 1. ! A total of 208 telescope corrections were flagged in sub-array 2. ! A total of 1091 telescope corrections were flagged in sub-array 3. ! A total of 260 telescope corrections were flagged in sub-array 4. ! A total of 758 telescope corrections were flagged in sub-array 5. ! A total of 247 telescope corrections were flagged in sub-array 6. ! A total of 2890 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 226 telescope corrections were flagged in sub-array 1. ! A total of 208 telescope corrections were flagged in sub-array 2. ! A total of 1091 telescope corrections were flagged in sub-array 3. ! A total of 260 telescope corrections were flagged in sub-array 4. ! A total of 758 telescope corrections were flagged in sub-array 5. ! A total of 247 telescope corrections were flagged in sub-array 6. ! A total of 2725 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.417610Jy sigma=0.011856 ! Fit after self-cal, rms=0.948301Jy sigma=0.008081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.038 mas, bmaj=5.007 mas, bpa=4.6 degrees ! Estimated noise=920.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19071 Jy ! Component: 100 - total flux cleaned = 1.58192 Jy ! Total flux subtracted in 100 components = 1.58192 Jy ! Clean residual min=-0.048689 max=0.179236 Jy/beam ! Clean residual mean=0.000607 rms=0.016659 Jy/beam ! Combined flux in latest and established models = 1.58192 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.58192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586265Jy sigma=0.004877 ! Fit after self-cal, rms=0.585564Jy sigma=0.004870 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203724 Jy ! Component: 100 - total flux cleaned = 0.315066 Jy ! Total flux subtracted in 100 components = 0.315066 Jy ! Clean residual min=-0.029864 max=0.090630 Jy/beam ! Clean residual mean=0.000138 rms=0.009018 Jy/beam ! Combined flux in latest and established models = 1.89698 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 1.89698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484334Jy sigma=0.003894 ! Fit after self-cal, rms=0.483554Jy sigma=0.003887 ! Inverting map ! Added new window around map position (5.5, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843558 Jy ! Component: 100 - total flux cleaned = 0.137301 Jy ! Total flux subtracted in 100 components = 0.137301 Jy ! Clean residual min=-0.027070 max=0.039286 Jy/beam ! Clean residual mean=-0.000121 rms=0.006686 Jy/beam ! Combined flux in latest and established models = 2.03428 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 2.03428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.461906Jy sigma=0.003667 ! Fit after self-cal, rms=0.461065Jy sigma=0.003661 ! Inverting map ! Added new window around map position (2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435969 Jy ! Component: 100 - total flux cleaned = 0.0729136 Jy ! Total flux subtracted in 100 components = 0.0729136 Jy ! Clean residual min=-0.020649 max=0.024704 Jy/beam ! Clean residual mean=-0.000255 rms=0.005694 Jy/beam ! Combined flux in latest and established models = 2.1072 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 2.1072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.456326Jy sigma=0.003605 ! Fit after self-cal, rms=0.456086Jy sigma=0.003603 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.986 mas, bpa=-4.802 degrees ! Estimated noise=402.034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323401 Jy ! Component: 100 - total flux cleaned = 0.0468541 Jy ! Component: 150 - total flux cleaned = 0.0505761 Jy ! Component: 200 - total flux cleaned = 0.0518297 Jy ! Total flux subtracted in 200 components = 0.0518297 Jy ! Clean residual min=-0.032950 max=0.029002 Jy/beam ! Clean residual mean=-0.001188 rms=0.007871 Jy/beam ! Combined flux in latest and established models = 2.15903 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 2.15903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454110Jy sigma=0.003581 ! Fit after self-cal, rms=0.453886Jy sigma=0.003580 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00* GG 1.00* ! HH 1.00* HN 1.07 KK 0.99 KP 1.04 ! LA 1.04 MA 1.00* MC 1.00* MK 0.99 ! NL 1.03 NY 1.00* OV 0.99 PT 1.00 ! SC 1.06 TS 1.00* WF 1.05 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 GC 0.99 GG 1.00* ! HH 1.00* HN 1.00* KK 0.98 KP 1.00 ! LA 1.04 MA 1.00* MC 1.00* MK 1.00 ! NL 1.00* NY 1.00* OV 1.00 PT 1.02 ! SC 1.00* TS 1.05 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.94 GC 1.00* GG 1.00* ! HH 1.00* HN 1.01 KK 1.06 KP 1.04 ! LA 0.99 MA 1.00* MC 1.00* MK 1.03 ! NL 0.98 NY 1.00* OV 0.97 PT 0.97 ! SC 0.98 TS 1.00* WF 0.79 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HH 1.10 HN 1.02 KK 1.00* KP 1.07 ! LA 1.03 MA 1.00* MC 1.00* MK 1.00* ! NL 1.03 NY 1.00* OV 1.00* PT 1.01 ! SC 1.03 TS 1.00* WF 1.11 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 GC 1.00* GG 1.00* ! HH 1.00* HN 1.05 KK 0.96 KP 1.01 ! LA 1.00 MA 1.00* MC 1.00* MK 1.00 ! NL 0.99 NY 1.00* OV 0.96 PT 1.02 ! SC 1.02 TS 1.00* WF 1.02 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.04 GC 1.01 GG 1.00* ! HH 1.00* HN 1.00* KK 0.98 KP 0.99 ! LA 1.01 MA 1.00* MC 1.00* MK 1.01 ! NL 1.00* NY 1.00* OV 0.97 PT 1.03 ! SC 1.00* TS 1.05 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.96 GC 1.00* GG 1.00* ! HH 1.00* HN 1.02 KK 1.07 KP 0.78 ! LA 0.96 MA 1.00* MC 1.00* MK 1.04 ! NL 0.95 NY 1.00* OV 0.95 PT 0.99 ! SC 0.97 TS 1.00* WF 1.05 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.01 GC 1.00* GG 1.00* ! HH 1.05 HN 1.00 KK 1.00* KP 1.02 ! LA 1.00 MA 1.00* MC 1.00* MK 1.00* ! NL 0.99 NY 1.00* OV 1.00* PT 1.03 ! SC 1.00 TS 1.00* WF 0.98 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 GC 1.00* GG 1.00* ! HH 1.00* HN 0.96 KK 0.90 KP 0.93 ! LA 1.03 MA 1.00* MC 1.00* MK 0.94 ! NL 0.92 NY 1.00* OV 1.04 PT 1.02 ! SC 1.02 TS 1.00* WF 0.96 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.03 GC 1.07 GG 1.00* ! HH 1.00* HN 1.00* KK 0.94 KP 1.04 ! LA 1.08 MA 1.00* MC 1.00* MK 0.99 ! NL 1.00* NY 1.00* OV 1.07 PT 0.99 ! SC 1.00* TS 1.03 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.86 FD 0.98 GC 1.00* GG 1.00* ! HH 1.00* HN 0.87 KK 1.02 KP 0.94 ! LA 1.07 MA 1.00* MC 1.00* MK 0.99 ! NL 0.96 NY 1.00* OV 1.04 PT 1.01 ! SC 1.00 TS 1.00* WF 1.02 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.99 GC 1.00* GG 1.00* ! HH 1.00* HN 1.06 KK 1.00* KP 0.97 ! LA 1.10 MA 1.00* MC 1.00* MK 1.00* ! NL 1.74 NY 1.00* OV 1.00* PT 0.99 ! SC 1.09 TS 1.00* WF 0.97 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 GC 1.00* GG 1.00* ! HH 1.00* HN 1.06 KK 0.96 KP 1.02 ! LA 1.01 MA 1.00* MC 1.00* MK 0.98 ! NL 1.01 NY 1.00* OV 0.99 PT 1.10 ! SC 1.08 TS 1.00* WF 1.04 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 GC 1.01 GG 1.00* ! HH 1.00* HN 1.00* KK 0.98 KP 1.00 ! LA 1.03 MA 1.00* MC 1.00* MK 1.00 ! NL 1.00* NY 1.00* OV 1.00 PT 1.07 ! SC 1.00* TS 1.04 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.96 GC 1.00* GG 1.00* ! HH 1.00* HN 1.00 KK 1.05 KP 0.80 ! LA 0.98 MA 1.00* MC 1.00* MK 1.01 ! NL 0.98 NY 1.00* OV 0.99 PT 1.00 ! SC 1.03 TS 1.00* WF 1.05 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.01 GC 1.00* GG 1.00* ! HH 1.18 HN 1.01 KK 1.00* KP 1.02 ! LA 1.02 MA 1.00* MC 1.00* MK 1.00* ! NL 1.02 NY 1.00* OV 1.00* PT 1.04 ! SC 1.05 TS 1.00* WF 1.00 WZ 1.00* ! ! ! Fit before self-cal, rms=0.453886Jy sigma=0.003580 ! Fit after self-cal, rms=0.481876Jy sigma=0.003286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.131 mas, bpa=-5.362 degrees ! Estimated noise=403.954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528269 Jy ! Component: 100 - total flux cleaned = 0.00561729 Jy ! Component: 150 - total flux cleaned = 0.00586821 Jy ! Component: 200 - total flux cleaned = 0.00607659 Jy ! Total flux subtracted in 200 components = 0.00607659 Jy ! Clean residual min=-0.008029 max=0.007534 Jy/beam ! Clean residual mean=0.000179 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 2.1651 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 2.1651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.481519Jy sigma=0.003282 ! Fit after self-cal, rms=0.482150Jy sigma=0.003277 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482150Jy sigma=0.003277 ! Fit after self-cal, rms=0.486682Jy sigma=0.003277 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.127 mas, bpa=-5.374 degrees ! Estimated noise=404.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442298 Jy ! Component: 100 - total flux cleaned = 0.00487607 Jy ! Component: 150 - total flux cleaned = 0.0048682 Jy ! Component: 200 - total flux cleaned = 0.00486728 Jy ! Total flux subtracted in 200 components = 0.00486728 Jy ! Clean residual min=-0.007958 max=0.007125 Jy/beam ! Clean residual mean=0.000166 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 2.16997 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 2.16997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486520Jy sigma=0.003275 ! Fit after self-cal, rms=0.486589Jy sigma=0.003275 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837574 Jy ! Component: 100 - total flux cleaned = 0.000692675 Jy ! Component: 150 - total flux cleaned = 0.000564733 Jy ! Component: 200 - total flux cleaned = 0.000566367 Jy ! Total flux subtracted in 200 components = 0.000566367 Jy ! Clean residual min=-0.007698 max=0.006990 Jy/beam ! Clean residual mean=0.000160 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 2.17054 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 2.17054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486518Jy sigma=0.003274 ! Fit after self-cal, rms=0.486517Jy sigma=0.003274 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486517Jy sigma=0.003274 ! Fit after self-cal, rms=0.512731Jy sigma=0.003269 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.123 mas, bpa=-5.397 degrees ! Estimated noise=404.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293328 Jy ! Component: 100 - total flux cleaned = 0.00382766 Jy ! Component: 150 - total flux cleaned = 0.00444166 Jy ! Component: 200 - total flux cleaned = 0.00453236 Jy ! Total flux subtracted in 200 components = 0.00453236 Jy ! Clean residual min=-0.007919 max=0.007125 Jy/beam ! Clean residual mean=0.000153 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 2.17507 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 2.17507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512659Jy sigma=0.003268 ! Fit after self-cal, rms=0.513079Jy sigma=0.003268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.9504e-09 Jy ! Component: 100 - total flux cleaned = 9.77361e-05 Jy ! Component: 150 - total flux cleaned = 9.62203e-05 Jy ! Component: 200 - total flux cleaned = 9.35959e-05 Jy ! Total flux subtracted in 200 components = 9.35959e-05 Jy ! Clean residual min=-0.007733 max=0.007060 Jy/beam ! Clean residual mean=0.000152 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 2.17516 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 2.17516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513047Jy sigma=0.003268 ! Fit after self-cal, rms=0.513045Jy sigma=0.003268 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513045Jy sigma=0.003268 ! Fit after self-cal, rms=0.488574Jy sigma=0.003260 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.672 mas, bmaj=12.9 mas, bpa=-3.542 degrees ! Estimated noise=502.524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402133 Jy ! Component: 100 - total flux cleaned = 0.00512598 Jy ! Component: 150 - total flux cleaned = 0.00535954 Jy ! Component: 200 - total flux cleaned = 0.00540017 Jy ! Total flux subtracted in 200 components = 0.00540017 Jy ! Clean residual min=-0.007400 max=0.007795 Jy/beam ! Clean residual mean=0.000260 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 2.18056 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 2.18056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.488583Jy sigma=0.003260 ! Fit after self-cal, rms=0.488350Jy sigma=0.003260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334522 Jy ! Component: 100 - total flux cleaned = 0.000519869 Jy ! Component: 150 - total flux cleaned = 0.000594983 Jy ! Component: 200 - total flux cleaned = 0.000630319 Jy ! Total flux subtracted in 200 components = 0.000630319 Jy ! Clean residual min=-0.007300 max=0.008104 Jy/beam ! Clean residual mean=0.000249 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 2.18119 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 79 components and 2.18119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.488351Jy sigma=0.003260 ! Fit after self-cal, rms=0.488352Jy sigma=0.003260 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.121 mas, bpa=-5.411 degrees ! Estimated noise=404.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 8.121 at -5.411 degrees (North through East) ! Clean map min=-0.0074141 max=1.6768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.488352Jy sigma=0.003260 ! Fit after self-cal, rms=1.082986Jy sigma=0.002683 ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.129 mas, bpa=-5.396 degrees ! Estimated noise=405.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210604 Jy ! Component: 100 - total flux cleaned = -0.00263821 Jy ! Component: 150 - total flux cleaned = -0.00294759 Jy ! Component: 200 - total flux cleaned = -0.00321743 Jy ! Total flux subtracted in 200 components = -0.00321743 Jy ! Clean residual min=-0.007057 max=0.008259 Jy/beam ! Clean residual mean=0.000234 rms=0.001691 Jy/beam ! Combined flux in latest and established models = 2.17798 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 2.17797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082929Jy sigma=0.002682 ! Fit after self-cal, rms=1.082926Jy sigma=0.002682 ! Inverting map ! Added new window around map position (12, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631718 Jy ! Component: 100 - total flux cleaned = 0.00633368 Jy ! Component: 150 - total flux cleaned = 0.00594882 Jy ! Component: 200 - total flux cleaned = 0.00560858 Jy ! Total flux subtracted in 200 components = 0.00560858 Jy ! Clean residual min=-0.006021 max=0.006068 Jy/beam ! Clean residual mean=0.000184 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 2.18358 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 2.18358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082852Jy sigma=0.002681 ! Fit after self-cal, rms=1.082735Jy sigma=0.002681 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082735Jy sigma=0.002681 ! Fit after self-cal, rms=1.459587Jy sigma=0.002680 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=5.314 mas, bpa=2.996 degrees ! Estimated noise=895.002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19449 Jy ! Component: 100 - total flux cleaned = 1.58493 Jy ! Component: 150 - total flux cleaned = 1.78652 Jy ! Component: 200 - total flux cleaned = 1.90729 Jy ! Total flux subtracted in 200 components = 1.90729 Jy ! Clean residual min=-0.020475 max=0.062943 Jy/beam ! Clean residual mean=0.000475 rms=0.006541 Jy/beam ! Combined flux in latest and established models = 1.90729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.90729 Jy ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.132 mas, bpa=-5.407 degrees ! Estimated noise=404.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120202 Jy ! Component: 100 - total flux cleaned = 0.182683 Jy ! Component: 150 - total flux cleaned = 0.217719 Jy ! Component: 200 - total flux cleaned = 0.238848 Jy ! Total flux subtracted in 200 components = 0.238848 Jy ! Clean residual min=-0.005952 max=0.012904 Jy/beam ! Clean residual mean=0.000517 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 2.14614 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 55 components and 2.14613 Jy ! Inverting map ! Added new window around map position (2.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142754 Jy ! Component: 100 - total flux cleaned = 0.023689 Jy ! Component: 150 - total flux cleaned = 0.0300838 Jy ! Component: 200 - total flux cleaned = 0.0327195 Jy ! Total flux subtracted in 200 components = 0.0327195 Jy ! Clean residual min=-0.005149 max=0.005753 Jy/beam ! Clean residual mean=0.000225 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 2.17885 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 2.17885 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=12.93 mas, bpa=-3.633 degrees ! Estimated noise=501.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168345 Jy ! Component: 100 - total flux cleaned = 0.00179931 Jy ! Component: 150 - total flux cleaned = 0.00148149 Jy ! Component: 200 - total flux cleaned = 0.00119547 Jy ! Total flux subtracted in 200 components = 0.00119547 Jy ! Clean residual min=-0.004633 max=0.006192 Jy/beam ! Clean residual mean=0.000446 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 2.18005 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257728 Jy ! Component: 100 - total flux cleaned = -0.000435347 Jy ! Component: 150 - total flux cleaned = -0.000598821 Jy ! Component: 200 - total flux cleaned = -0.000748192 Jy ! Total flux subtracted in 200 components = -0.000748192 Jy ! Clean residual min=-0.004699 max=0.006172 Jy/beam ! Clean residual mean=0.000460 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 2.1793 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 126 components and 2.1793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.132 mas, bpa=-5.407 degrees ! Estimated noise=404.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368948 Jy ! Component: 100 - total flux cleaned = -0.000130879 Jy ! Component: 150 - total flux cleaned = -2.03424e-05 Jy ! Component: 200 - total flux cleaned = 8.46461e-05 Jy ! Total flux subtracted in 200 components = 8.46461e-05 Jy ! Clean residual min=-0.004763 max=0.005659 Jy/beam ! Clean residual mean=0.000219 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 2.17939 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 135 components and 2.17939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.459574Jy sigma=0.002681 ! Fit after self-cal, rms=1.459542Jy sigma=0.002681 wmodel J2246-1206_S_2000_12_04_pus_map.mod ! Writing 135 model components to file: J2246-1206_S_2000_12_04_pus_map.mod wobs J2246-1206_S_2000_12_04_pus_uvs.fits ! Writing UV FITS file: J2246-1206_S_2000_12_04_pus_uvs.fits wwins J2246-1206_S_2000_12_04_pus_map.win ! wwins: Wrote 5 windows to J2246-1206_S_2000_12_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251383 Jy ! Component: 100 - total flux cleaned = 0.00478086 Jy ! Component: 150 - total flux cleaned = 0.00687728 Jy ! Component: 200 - total flux cleaned = 0.00837367 Jy ! Component: 250 - total flux cleaned = 0.00927007 Jy ! Component: 300 - total flux cleaned = 0.0102727 Jy ! Component: 350 - total flux cleaned = 0.011169 Jy ! Component: 400 - total flux cleaned = 0.0120379 Jy ! Component: 450 - total flux cleaned = 0.0127541 Jy ! Component: 500 - total flux cleaned = 0.0136413 Jy ! Component: 550 - total flux cleaned = 0.0143224 Jy ! Component: 600 - total flux cleaned = 0.0149893 Jy ! Component: 650 - total flux cleaned = 0.015524 Jy ! Component: 700 - total flux cleaned = 0.0159903 Jy ! Component: 750 - total flux cleaned = 0.0164486 Jy ! Component: 800 - total flux cleaned = 0.016787 Jy ! Component: 850 - total flux cleaned = 0.0172315 Jy ! Component: 900 - total flux cleaned = 0.0176693 Jy ! Component: 950 - total flux cleaned = 0.0182085 Jy ! Component: 1000 - total flux cleaned = 0.0186869 Jy ! Component: 1050 - total flux cleaned = 0.0190022 Jy ! Component: 1100 - total flux cleaned = 0.0195205 Jy ! Component: 1150 - total flux cleaned = 0.0198784 Jy ! Component: 1200 - total flux cleaned = 0.0201816 Jy ! Component: 1250 - total flux cleaned = 0.0205314 Jy ! Component: 1300 - total flux cleaned = 0.0208277 Jy ! Component: 1350 - total flux cleaned = 0.0211687 Jy ! Component: 1400 - total flux cleaned = 0.0213135 Jy ! Component: 1450 - total flux cleaned = 0.021648 Jy ! Component: 1500 - total flux cleaned = 0.0218369 Jy ! Component: 1550 - total flux cleaned = 0.0220708 Jy ! Component: 1600 - total flux cleaned = 0.0223017 Jy ! Component: 1650 - total flux cleaned = 0.0223936 Jy ! Component: 1700 - total flux cleaned = 0.0225754 Jy ! Component: 1750 - total flux cleaned = 0.0228889 Jy ! Component: 1800 - total flux cleaned = 0.0231103 Jy ! Component: 1850 - total flux cleaned = 0.0232418 Jy ! Component: 1900 - total flux cleaned = 0.023416 Jy ! Component: 1950 - total flux cleaned = 0.0236743 Jy ! Component: 2000 - total flux cleaned = 0.0239299 Jy ! Total flux subtracted in 2048 components = 0.0239296 Jy ! Clean residual min=-0.002598 max=0.002949 Jy/beam ! Clean residual mean=0.000073 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 2.20332 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 266 components and 2.20332 Jy ![Exited script file: muppet] wmap "J2246-1206_S_2000_12_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 8.132 at -5.407 degrees (North through East) ! Clean map min=-0.0036623 max=1.679 Jy/beam ! Writing clean map to FITS file: J2246-1206_S_2000_12_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.67903 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000880272 device "J2246-1206_S_2000_12_04_pus\_map.eps/VPS" ! Attempting to open device: 'J2246-1206_S_2000_12_04_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.157282 0.157282 0.314565 0.62913 1.25826 2.51652 5.03304 10.0661 20.1322 40.2643 80.5286 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.679 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 8.132 at -5.407 degrees (North through East) ! Clean map min=-0.0036623 max=1.679 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2246-1206_S_2000_12_04_pus\_map.gif/vgif" ! Attempting to open device: 'J2246-1206_S_2000_12_04_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2246-1206_S_2000_12_04_pus_uvs.log closed on Wed Oct 17 17:23:00 2007